diff options
Diffstat (limited to 'install-files/openstack/usr/share/openstack/neutron/l3_agent.ini')
| -rw-r--r-- | install-files/openstack/usr/share/openstack/neutron/l3_agent.ini | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/install-files/openstack/usr/share/openstack/neutron/l3_agent.ini b/install-files/openstack/usr/share/openstack/neutron/l3_agent.ini deleted file mode 100644 index bc1321e4..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/l3_agent.ini +++ /dev/null @@ -1,121 +0,0 @@ -[DEFAULT] -# Show debugging output in log (sets DEBUG log level output) -# debug = False - -# L3 requires that an interface driver be set. Choose the one that best -# matches your plugin. -interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver - -# Example of interface_driver option for OVS based plugins (OVS, Ryu, NEC) -# that supports L3 agent -# interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver - -# Use veth for an OVS interface or not. -# Support kernels with limited namespace support -# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. -# ovs_use_veth = False - -# Example of interface_driver option for LinuxBridge -# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver - -# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and -# iproute2 package that supports namespaces). This option is deprecated and -# will be removed in a future release, at which point the old behavior of -# use_namespaces = True will be enforced. -# use_namespaces = True - -# If use_namespaces is set as False then the agent can only configure one router. - -# This is done by setting the specific router_id. -# router_id = - -# When external_network_bridge is set, each L3 agent can be associated -# with no more than one external network. This value should be set to the UUID -# of that external network. To allow L3 agent support multiple external -# networks, both the external_network_bridge and gateway_external_network_id -# must be left empty. -# gateway_external_network_id = - -# With IPv6, the network used for the external gateway does not need -# to have an associated subnet, since the automatically assigned -# link-local address (LLA) can be used. However, an IPv6 gateway address -# is needed for use as the next-hop for the default route. If no IPv6 -# gateway address is configured here, (and only then) the neutron router -# will be configured to get its default route from router advertisements (RAs) -# from the upstream router; in which case the upstream router must also be -# configured to send these RAs. -# The ipv6_gateway, when configured, should be the LLA of the interface -# on the upstream router. If a next-hop using a global unique address (GUA) -# is desired, it needs to be done via a subnet allocated to the network -# and not through this parameter. -# ipv6_gateway = - -# Indicates that this L3 agent should also handle routers that do not have -# an external network gateway configured. This option should be True only -# for a single agent in a Neutron deployment, and may be False for all agents -# if all routers must have an external network gateway -# handle_internal_only_routers = True - -# Name of bridge used for external network traffic. This should be set to -# empty value for the linux bridge. when this parameter is set, each L3 agent -# can be associated with no more than one external network. -external_network_bridge = br-ex - -# TCP Port used by Neutron metadata server -# metadata_port = 9697 - -# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0 -# to disable this feature. -# send_arp_for_ha = 3 - -# seconds between re-sync routers' data if needed -# periodic_interval = 40 - -# seconds to start to sync routers' data after -# starting agent -# periodic_fuzzy_delay = 5 - -# enable_metadata_proxy, which is true by default, can be set to False -# if the Nova metadata server is not available -# enable_metadata_proxy = True - -# Iptables mangle mark used to mark metadata valid requests -# metadata_access_mark = 0x1 - -# Iptables mangle mark used to mark ingress from external network -# external_ingress_mark = 0x2 - -# router_delete_namespaces, which is True by default, can be set to False if -# namespaces can't be deleted cleanly on the host running the L3 agent. -# Disable this if you hit the issue in -# https://bugs.launchpad.net/neutron/+bug/1052535 or if -# you are sure that your version of iproute suffers from the problem. -# If True, namespaces will be deleted when a router is destroyed. -# router_delete_namespaces = True - -# Timeout for ovs-vsctl commands. -# If the timeout expires, ovs commands will fail with ALARMCLOCK error. -# ovs_vsctl_timeout = 10 - -# The working mode for the agent. Allowed values are: -# - legacy: this preserves the existing behavior where the L3 agent is -# deployed on a centralized networking node to provide L3 services -# like DNAT, and SNAT. Use this mode if you do not want to adopt DVR. -# - dvr: this mode enables DVR functionality, and must be used for an L3 -# agent that runs on a compute host. -# - dvr_snat: this enables centralized SNAT support in conjunction with -# DVR. This mode must be used for an L3 agent running on a centralized -# node (or in single-host deployments, e.g. devstack). -# agent_mode = legacy - -# Location to store keepalived and all HA configurations -# ha_confs_path = $state_path/ha_confs - -# VRRP authentication type AH/PASS -# ha_vrrp_auth_type = PASS - -# VRRP authentication password -# ha_vrrp_auth_password = - -# The advertisement interval in seconds -# ha_vrrp_advert_int = 2 |