updated for version 7.0164

6 files changed, 506 insertions, 358 deletions

diff --git a/runtime/doc/autocmd.txt b/runtime/doc/autocmd.txt
index 37a51ad9..6deeaeaf 100644
--- a/runtime/doc/autocmd.txt
+++ b/runtime/doc/autocmd.txt
@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.0aa.  Last change: 2005 Nov 21
+*autocmd.txt*   For Vim version 7.0aa.  Last change: 2005 Dec 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -169,18 +169,195 @@ See |:verbose-cmd| for more information.
 ==============================================================================
 5. Events					*autocmd-events* *E215* *E216*
 
+You can specify a comma-separated list of event names.  No white space can be
+used in this list.  The command applies to all the events in the list.
+
+For READING FILES there are four kinds of events possible:
+	BufNewFile			starting to edit a non-existent file
+	BufReadPre	BufReadPost	starting to edit an existing file
+	FilterReadPre	FilterReadPost	read the temp file with filter output
+	FileReadPre	FileReadPost	any other file read
+Vim uses only one of these four kinds when reading a file.  The "Pre" and
+"Post" events are both triggered, before and after reading the file.
+
+Note that the autocommands for the *ReadPre events and all the Filter events
+are not allowed to change the current buffer (you will get an error message if
+this happens).  This is to prevent the file to be read into the wrong buffer.
+
+Note that the 'modified' flag is reset AFTER executing the BufReadPost
+and BufNewFile autocommands.  But when the 'modified' option was set by the
+autocommands, this doesn't happen.
+
+You can use the 'eventignore' option to ignore a number of events or all
+events.
 					*autocommand-events* *{event}*
 Vim recognizes the following events.  Vim ignores the case of event names
 (e.g., you can use "BUFread" or "bufread" instead of "BufRead").
 
+First an overview by function with a short explanation.  Then the list
+alpabetically with full explanations |autocmd-events-abc|.
+
+Name			triggered by ~
+
+	Reading
+|BufNewFile|		starting to edit a file that doesn't exist
+|BufReadPre|		starting to edit a new buffer, before reading the file
+|BufRead|		starting to edit a new buffer, after reading the file
+|BufReadPost|		starting to edit a new buffer, after reading the file
+|BufReadCmd|		before starting to edit a new buffer |Cmd-event|
+
+|FileReadPre|		before reading a file with a ":read" command
+|FileReadPost|		after reading a file with a ":read" command
+|FileReadCmd|		before reading a file with a ":read" comman |Cmd-event|
+
+|FilterReadPre|		before reading a file from a filter command
+|FilterReadPost|	after reading a file from a filter command
+
+|StdinReadPre|		before reading from stdin into the buffer
+|StdinReadPost|		After reading from the stdin into the buffer
+
+	Writing
+|BufWrite|		starting to write the whole buffer to a file
+|BufWritePre|		starting to write the whole buffer to a file
+|BufWritePost|		after writing the whole buffer to a file
+|BufWriteCmd|		before writing the whole buffer to a file |Cmd-event|
+
+|FileWritePre|		starting to write part of a buffer to a file
+|FileWritePost|		after writing part of a buffer to a file
+|FileWriteCmd|		before writing part of a buffer to a file |Cmd-event|
+
+|FileAppendPre|		starting to append to a file
+|FileAppendPost|	after appending to a file
+|FileAppendCmd|		before appending to a file |Cmd-event|
+
+|FilterWritePre|	starting to write a file for a filter command or diff
+|FilterWritePost|	after writing a file for a filter command or diff
+
+	Buffers
+|BufAdd|		just after adding a buffer to the buffer list
+|BufCreate|		just after adding a buffer to the buffer list
+|BufDelete|		before deleting a buffer from the buffer list
+|BufWipeout|		before completely deleting a buffer
+
+|BufFilePre|		before changing the name of the current buffer
+|BufFilePost|		after changing the name of the current buffer
+
+|BufEnter|		after entering a buffer
+|BufLeave|		before leaving to another buffer
+|BufWinEnter|		after a buffer is displayed in a window
+|BufWinLeave|		before a buffer is removed from a window
+
+|BufUnload|		before unloading a buffer
+|BufHidden|		just after a buffer has become hidden
+|BufNew|		just after creating a new buffer
+
+|SwapExists|		detected an existing swap file
+
+	Options
+|FileType|		when the 'filetype' option has been set
+|Syntax|		when the 'syntax' option has been set
+|EncodingChanged|	after the 'encoding' option has been changed
+|TermChanged|		after the value of 'term' has changed
+
+	Startup and exit
+|VimEnter|		after doing all the startup stuff
+|GUIEnter|		after starting the GUI successfully
+|TermResponse|		after the termainal response to |t_RV| is received
+
+|VimLeavePre|		before exiting Vim, before writing the viminfo file
+|VimLeave|		before exiting Vim, after writing the viminfo file
+
+	Various
+|FileChangedShell|	Vim notices that a file changed since editing started
+|FileChangedRO|		before making the first change to a read-only file
+
+|FuncUndefined|		a user function is used but it isn't defined
+
+|FocusGained|		Vim got input focus
+|FocusLost|		Vim lost input focus
+|CursorHold|		the user doesn't press a key for a while
+
+|WinEnter|		after entering another window
+|WinLeave|		before leaving a window
+|CmdwinEnter|		after entering the command-line window
+|CmdwinLeave|		before leaving the command-line window
+
+|InsertEnter|		starting Insert mode
+|InsertChange|		when typing <Insert> while in Insert or Replace mode
+|InsertLeave|		when leaving Insert mode
+
+|ColorScheme|		after loading a color scheme
+
+|RemoteReply|		a reply from a server Vim was received
+
+|QuickFixCmdPre|	before a quickfix command is run
+|QuickFixCmdPost|	after a quickfix command is run
+
+|SessionLoadPost|	after loading a session file
+
+|MenuPopup|		just before showing the popup menu
+
+|User|			to be used in combination with ":doautocmd"
+
+
+The alphabetical list of autocommand events:		*autocmd-events-abc*
+
+							*BufCreate* *BufAdd*
+BufAdd or BufCreate		Just after creating a new buffer which is
+				added to the buffer list, or adding a buffer
+				to the buffer list.
+				Also used just after a buffer in the buffer
+				list has been renamed.
+				The BufCreate event is for historic reasons.
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being created "<afile>".
+							*BufDelete*
+BufDelete			Before deleting a buffer from the buffer list.
+				The BufUnload may be called first (if the
+				buffer was loaded).
+				Also used just before a buffer in the buffer
+				list is renamed.
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being deleted "<afile>".
+							*BufEnter*
+BufEnter			After entering a buffer.  Useful for setting
+				options for a file type.  Also executed when
+				starting to edit a buffer, after the
+				BufReadPost autocommands.
+							*BufFilePost*
+BufFilePost			After changing the name of the current buffer
+				with the ":file" or ":saveas" command.
+							*BufReadCmd*
+BufFilePre			Before changing the name of the current buffer
+				with the ":file" or ":saveas" command.
+							*BufHidden*
+BufHidden			Just after a buffer has become hidden.  That
+				is, when there are no longer windows that show
+				the buffer, but the buffer is not unloaded or
+				deleted.  Not used for ":qa" or ":q" when
+				exiting Vim.
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being unloaded "<afile>".
+							*BufLeave*
+BufLeave			Before leaving to another buffer.  Also when
+				leaving or closing the current window and the
+				new current window is not for the same buffer.
+				Not used for ":qa" or ":q" when exiting Vim.
+							*BufNew*
+BufNew				Just after creating a new buffer.  Also used
+				just after a buffer has been renamed.  When
+				the buffer is added to the buffer list BufAdd
+				will be triggered too.
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being created "<afile>".
 							*BufNewFile*
 BufNewFile			When starting to edit a file that doesn't
 				exist.  Can be used to read in a skeleton
 				file.
-						*BufReadPre* *E200* *E201*
-BufReadPre			When starting to edit a new buffer, before
-				reading the file into the buffer.  Not used
-				if the file doesn't exist.
 						*BufRead* *BufReadPost*
 BufRead or BufReadPost		When starting to edit a new buffer, after
 				reading the file into the buffer, before
@@ -190,63 +367,49 @@ BufRead or BufReadPost		When starting to edit a new buffer, after
 				This does NOT work for ":r file".  Not used
 				when the file doesn't exist.  Also used after
 				successfully recovering a file.
-							*BufReadCmd*
+						*BufReadPre* *E200* *E201*
 BufReadCmd			Before starting to edit a new buffer.  Should
 				read the file into the buffer. |Cmd-event|
 							*BufFilePre*
-BufFilePre			Before changing the name of the current buffer
-				with the ":file" or ":saveas" command.
-							*BufFilePost*
-BufFilePost			After changing the name of the current buffer
-				with the ":file" or ":saveas" command.
-							*FileReadPre*
-FileReadPre			Before reading a file with a ":read" command.
-							*FileReadPost*
-FileReadPost			After reading a file with a ":read" command.
-				Note that Vim sets the '[ and '] marks to the
-				first and last line of the read.  This can be
-				used to operate on the lines just read.
-							*FileReadCmd*
-FileReadCmd			Before reading a file with a ":read" command.
-				Should do the reading of the file. |Cmd-event|
-							*FilterReadPre* *E135*
-FilterReadPre			Before reading a file from a filter command.
-				Vim checks the pattern against the name of
-				the current buffer, not the name of the
-				temporary file that is the output of the
-				filter command.
-				Not triggered when 'shelltemp' is off.
-							*FilterReadPost*
-FilterReadPost			After reading a file from a filter command.
-				Vim checks the pattern against the name of
-				the current buffer as with FilterReadPre.
-				Not triggered when 'shelltemp' is off.
-							*FileType*
-FileType			When the 'filetype' option has been set.
-				<afile> can be used for the name of the file
-				where this option was set, and <amatch> for
-				the new value of 'filetype'.
-				See |filetypes|.
-							*Syntax*
-Syntax				When the 'syntax' option has been set.
-				<afile> can be used for the name of the file
-				where this option was set, and <amatch> for
-				the new value of 'syntax'.
-				See |:syn-on|.
-							*StdinReadPre*
-StdinReadPre			Before reading from stdin into the buffer.
-				Only used when the "-" argument was used when
-				Vim was started |--|.
-							*StdinReadPost*
-StdinReadPost			After reading from the stdin into the buffer,
-				before executing the modelines.  Only used
-				when the "-" argument was used when Vim was
-				started |--|.
+BufReadPre			When starting to edit a new buffer, before
+				reading the file into the buffer.  Not used
+				if the file doesn't exist.
+							*BufUnload*
+BufUnload			Before unloading a buffer.  This is when the
+				text in the buffer is going to be freed.  This
+				may be after a BufWritePost and before a
+				BufDelete.  Also used for all buffers that are
+				loaded when Vim is going to exit.
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being unloaded "<afile>".
+							*BufWinEnter*
+BufWinEnter			After a buffer is displayed in a window.  This
+				can be when the buffer is loaded (after
+				processing the modelines), when a hidden
+				buffer is displayed in a window (and is no
+				longer hidden) or a buffer already visible in
+				a window is also displayed in another window.
+							*BufWinLeave*
+BufWinLeave			Before a buffer is removed from a window.
+				Not when it's still visible in another window.
+				Also triggered when exiting.  It's triggered
+				before BufUnload or BufHidden.
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being unloaded "<afile>".
+							*BufWipeout*
+BufWipeout			Before completely deleting a buffer.  The
+				BufUnload and BufDelete events may be called
+				first (if the buffer was loaded and was in the
+				buffer list).  Also used just before a buffer
+				is renamed (also when it's not in the buffer
+				list).
+				NOTE: When this autocommand is executed, the
+				current buffer "%" may be different from the
+				buffer being deleted "<afile>".
 						*BufWrite* *BufWritePre*
 BufWrite or BufWritePre		Before writing the whole buffer to a file.
-							*BufWritePost*
-BufWritePost			After writing the whole buffer to a file
-				(should undo the commands for BufWritePre).
 							*BufWriteCmd*
 BufWriteCmd			Before writing the whole buffer to a file.
 				Should do the writing of the file and reset
@@ -254,42 +417,68 @@ BufWriteCmd			Before writing the whole buffer to a file.
 				'cpo' and writing to another file |cpo-+|.
 				The buffer contents should not be changed.
 				|Cmd-event|
-							*FileWritePre*
-FileWritePre			Before writing to a file, when not writing the
-				whole buffer.  Use the '[ and '] marks for the
-				range of lines.
-							*FileWritePost*
-FileWritePost			After writing to a file, when not writing the
-				whole buffer.
-							*FileWriteCmd*
-FileWriteCmd			Before writing to a file, when not writing the
-				whole buffer.  Should do the writing to the
-				file.  Should not change the buffer.  Use the
-				'[ and '] marks for the range of lines.
-				|Cmd-event|
-							*FileAppendPre*
-FileAppendPre			Before appending to a file.  Use the '[ and ']
-				marks for the range of lines.
-							*FileAppendPost*
-FileAppendPost			After appending to a file.
+							*BufWritePost*
+BufWritePost			After writing the whole buffer to a file
+				(should undo the commands for BufWritePre).
+							*CmdwinEnter*
+CmdwinEnter			After entering the command-line window.
+				Useful for setting options specifically for
+				this special type of window.  This is
+				triggered _instead_ of BufEnter and WinEnter.
+				<afile> is set to a single character,
+				indicating the type of command-line.
+				|cmdwin-char|
+							*CmdwinLeave*
+CmdwinLeave			Before leaving the command-line window.
+				Useful to clean up any global setting done
+				with CmdwinEnter.  This is triggered _instead_
+				of BufLeave and WinLeave.
+				<afile> is set to a single character,
+				indicating the type of command-line.
+				|cmdwin-char|
+							*ColorScheme*
+ColorScheme			After loading a color scheme. |:colorscheme|
+							*CursorHold*
+CursorHold			When the user doesn't press a key for the time
+				specified with 'updatetime'.  Not re-triggered
+				until the user has pressed a key (i.e. doesn't
+				fire every 'updatetime' ms if you leave Vim to
+				make some coffee. :)  See |CursorHold-example|
+				for previewing tags.
+				This event is only triggered in Normal mode.
+				Note: Interactive commands cannot be used for
+				this event.  There is no hit-enter prompt,
+				the screen is updated directly (when needed).
+				Note: In the future there will probably be
+				another option to set the time.
+				Hint: to force an update of the status lines
+				use: >
+					:let &ro = &ro
+<				{only on Amiga, Unix, Win32, MSDOS and all GUI
+				versions}
+							*EncodingChanged*
+EncodingChanged			Fires off after the 'encoding' option has been
+				changed.  Useful to set up fonts, for example.
 							*FileAppendCmd*
 FileAppendCmd			Before appending to a file.  Should do the
 				appending to the file.  Use the '[ and ']
 				marks for the range of lines.|Cmd-event|
-							*FilterWritePre*
-FilterWritePre			Before writing a file for a filter command or
-				making a diff.
-				Vim checks the pattern against the name of
-				the current buffer, not the name of the
-				temporary file that is the output of the
-				filter command.
-				Not triggered when 'shelltemp' is off.
-							*FilterWritePost*
-FilterWritePost			After writing a file for a filter command or
-				making a diff.
-				Vim checks the pattern against the name of
-				the current buffer as with FilterWritePre.
-				Not triggered when 'shelltemp' is off.
+							*FileAppendPost*
+FileAppendPost			After appending to a file.
+							*FileAppendPre*
+FileAppendPre			Before appending to a file.  Use the '[ and ']
+				marks for the range of lines.
+							*FileChangedRO*
+FileChangedRO			Before making the first change to a read-only
+				file.  Can be used to check-out the file from
+				a source control system.  Not triggered when
+				the change was caused by an autocommand.
+				This event is triggered when making the first
+				change in a buffer or the first change after
+				'readonly' was set,
+				just before the change is applied to the text.
+				WARNING: If the autocommand moves the cursor
+				the effect of the change is undefined.
 							*FileChangedShell*
 FileChangedShell		When Vim notices that the modification time of
 				a file has changed since editing started.
@@ -319,17 +508,64 @@ FileChangedShell		When Vim notices that the modification time of
 				commands for the FileChangedShell event no
 				other FileChangedShell event will be
 				triggered.
-							*FileChangedRO*
-FileChangedRO			Before making the first change to a read-only
-				file.  Can be used to check-out the file from
-				a source control system.  Not triggered when
-				the change was caused by an autocommand.
-				This event is triggered when making the first
-				change in a buffer or the first change after
-				'readonly' was set,
-				just before the change is applied to the text.
-				WARNING: If the autocommand moves the cursor
-				the effect of the change is undefined.
+							*FileEncoding*
+FileEncoding			Obsolete.  It still works and is equivalent
+				to |EncodingChanged|.
+							*FileReadCmd*
+FileReadCmd			Before reading a file with a ":read" command.
+				Should do the reading of the file. |Cmd-event|
+							*FileReadPost*
+FileReadPost			After reading a file with a ":read" command.
+				Note that Vim sets the '[ and '] marks to the
+				first and last line of the read.  This can be
+				used to operate on the lines just read.
+							*FileReadPre*
+FileReadPre			Before reading a file with a ":read" command.
+							*FileType*
+FileType			When the 'filetype' option has been set.
+				<afile> can be used for the name of the file
+				where this option was set, and <amatch> for
+				the new value of 'filetype'.
+				See |filetypes|.
+							*FileWriteCmd*
+FileWriteCmd			Before writing to a file, when not writing the
+				whole buffer.  Should do the writing to the
+				file.  Should not change the buffer.  Use the
+				'[ and '] marks for the range of lines.
+				|Cmd-event|
+							*FileWritePost*
+FileWritePost			After writing to a file, when not writing the
+				whole buffer.
+							*FileWritePre*
+FileWritePre			Before writing to a file, when not writing the
+				whole buffer.  Use the '[ and '] marks for the
+				range of lines.
+							*FilterReadPost*
+FilterReadPost			After reading a file from a filter command.
+				Vim checks the pattern against the name of
+				the current buffer as with FilterReadPre.
+				Not triggered when 'shelltemp' is off.
+							*FilterReadPre* *E135*
+FilterReadPre			Before reading a file from a filter command.
+				Vim checks the pattern against the name of
+				the current buffer, not the name of the
+				temporary file that is the output of the
+				filter command.
+				Not triggered when 'shelltemp' is off.
+							*FilterWritePost*
+FilterWritePost			After writing a file for a filter command or
+				making a diff.
+				Vim checks the pattern against the name of
+				the current buffer as with FilterWritePre.
+				Not triggered when 'shelltemp' is off.
+							*FilterWritePre*
+FilterWritePre			Before writing a file for a filter command or
+				making a diff.
+				Vim checks the pattern against the name of
+				the current buffer, not the name of the
+				temporary file that is the output of the
+				filter command.
+				Not triggered when 'shelltemp' is off.
 							*FocusGained*
 FocusGained			When Vim got input focus.  Only for the GUI
 				version and a few console versions where this
@@ -345,183 +581,53 @@ FuncUndefined			When a user function is used but it isn't
 				when it's used.  Both <amatch> and <afile> are
 				set to the name of the function.
 				See |autoload-functions|.
-							*CursorHold*
-CursorHold			When the user doesn't press a key for the time
-				specified with 'updatetime'.  Not re-triggered
-				until the user has pressed a key (i.e. doesn't
-				fire every 'updatetime' ms if you leave Vim to
-				make some coffee. :)  See |CursorHold-example|
-				for previewing tags.
-				This event is only triggered in Normal mode.
-				Note: Interactive commands cannot be used for
-				this event.  There is no hit-enter prompt,
-				the screen is updated directly (when needed).
-				Note: In the future there will probably be
-				another option to set the time.
-				Hint: to force an update of the status lines
-				use: >
-					:let &ro = &ro
-<				{only on Amiga, Unix, Win32, MSDOS and all GUI
-				versions}
-							*BufEnter*
-BufEnter			After entering a buffer.  Useful for setting
-				options for a file type.  Also executed when
-				starting to edit a buffer, after the
-				BufReadPost autocommands.
-							*BufLeave*
-BufLeave			Before leaving to another buffer.  Also when
-				leaving or closing the current window and the
-				new current window is not for the same buffer.
-				Not used for ":qa" or ":q" when exiting Vim.
-							*BufWinEnter*
-BufWinEnter			After a buffer is displayed in a window.  This
-				can be when the buffer is loaded (after
-				processing the modelines), when a hidden
-				buffer is displayed in a window (and is no
-				longer hidden) or a buffer already visible in
-				a window is also displayed in another window.
-							*BufWinLeave*
-BufWinLeave			Before a buffer is removed from a window.
-				Not when it's still visible in another window.
-				Also triggered when exiting.  It's triggered
-				before BufUnload or BufHidden.
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being unloaded "<afile>".
-							*BufUnload*
-BufUnload			Before unloading a buffer.  This is when the
-				text in the buffer is going to be freed.  This
-				may be after a BufWritePost and before a
-				BufDelete.  Also used for all buffers that are
-				loaded when Vim is going to exit.
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being unloaded "<afile>".
-							*BufHidden*
-BufHidden			Just after a buffer has become hidden.  That
-				is, when there are no longer windows that show
-				the buffer, but the buffer is not unloaded or
-				deleted.  Not used for ":qa" or ":q" when
-				exiting Vim.
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being unloaded "<afile>".
-							*BufNew*
-BufNew				Just after creating a new buffer.  Also used
-				just after a buffer has been renamed.  When
-				the buffer is added to the buffer list BufAdd
-				will be triggered too.
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being created "<afile>".
-							*BufCreate* *BufAdd*
-BufAdd or BufCreate		Just after creating a new buffer which is
-				added to the buffer list, or adding a buffer
-				to the buffer list.
-				Also used just after a buffer in the buffer
-				list has been renamed.
-				The BufCreate event is for historic reasons.
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being created "<afile>".
-							*BufDelete*
-BufDelete			Before deleting a buffer from the buffer list.
-				The BufUnload may be called first (if the
-				buffer was loaded).
-				Also used just before a buffer in the buffer
-				list is renamed.
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being deleted "<afile>".
-							*BufWipeout*
-BufWipeout			Before completely deleting a buffer.  The
-				BufUnload and BufDelete events may be called
-				first (if the buffer was loaded and was in the
-				buffer list).  Also used just before a buffer
-				is renamed (also when it's not in the buffer
-				list).
-				NOTE: When this autocommand is executed, the
-				current buffer "%" may be different from the
-				buffer being deleted "<afile>".
-							*WinEnter*
-WinEnter			After entering another window.  Not done for
-				the first window, when Vim has just started.
-				Useful for setting the window height.
-				If the window is for another buffer, Vim
-				executes the BufEnter autocommands after the
-				WinEnter autocommands.
-				Note: When using ":split fname" the WinEnter
-				event is triggered after the split but before
-				the file "fname" is loaded.
-							*WinLeave*
-WinLeave			Before leaving a window.  If the window to be
-				entered next is for a different buffer, Vim
-				executes the BufLeave autocommands before the
-				WinLeave autocommands (but not for ":new").
-				Not used for ":qa" or ":q" when exiting Vim.
-							*CmdwinEnter*
-CmdwinEnter			After entering the command-line window.
-				Useful for setting options specifically for
-				this special type of window.  This is
-				triggered _instead_ of BufEnter and WinEnter.
-				<afile> is set to a single character,
-				indicating the type of command-line.
-				|cmdwin-char|
-							*CmdwinLeave*
-CmdwinLeave			Before leaving the command-line window.
-				Useful to clean up any global setting done
-				with CmdwinEnter.  This is triggered _instead_
-				of BufLeave and WinLeave.
-				<afile> is set to a single character,
-				indicating the type of command-line.
-				|cmdwin-char|
 							*GUIEnter*
 GUIEnter			After starting the GUI successfully, and after
 				opening the window.  It is triggered before
 				VimEnter when using gvim.  Can be used to
 				position the window from a .gvimrc file: >
 	:autocmd GUIEnter * winpos 100 50
-<							*VimEnter*
-VimEnter			After doing all the startup stuff, including
-				loading .vimrc files, executing the "-c cmd"
-				arguments, creating all windows and loading
-				the buffers in them.
-							*VimLeavePre*
-VimLeavePre			Before exiting Vim, just before writing the
-				.viminfo file.  This is executed only once,
-				if there is a match with the name of what
-				happens to be the current buffer when exiting.
-				Mostly useful with a "*" pattern. >
-	:autocmd VimLeavePre * call CleanupStuff()
-<				To detect an abnormal exit use |v:dying|.
-							*VimLeave*
-VimLeave			Before exiting Vim, just after writing the
-				.viminfo file.  Executed only once, like
-				VimLeavePre.
-				To detect an abnormal exit use |v:dying|.
-							*EncodingChanged*
-EncodingChanged			Fires off after the 'encoding' option has been
-				changed.  Useful to set up fonts, for example.
+<							*InsertChange*
+InsertChange			When typing <Insert> while in Insert or
+				Replace mode.  The |v:insertmode| variable
+				indicates the new mode.
+				Be careful not to move the cursor or do
+				anything else that the user does not expect.
 							*InsertEnter*
 InsertEnter			When starting Insert mode.  Also for Replace
 				mode and Virtual Replace mode.  The
 				|v:insertmode| variable indicates the mode.
 				Be careful not to move the cursor or do
 				anything else that the user does not expect.
-							*InsertChange*
-InsertChange			When typing <Insert> while in Insert or
-				Replace mode.  The |v:insertmode| variable
-				indicates the new mode.
-				Be careful not to move the cursor or do
-				anything else that the user does not expect.
 							*InsertLeave*
 InsertLeave			When leaving Insert mode.  Also when using
 				CTRL-O |i_CTRL-O|.  But not for |i_CTRL-C|.
-							*FileEncoding*
-FileEncoding			Obsolete.  It still works and is equivalent
-				to |EncodingChanged|.
-							*ColorScheme*
-ColorScheme			After loading a color scheme. |:colorscheme|
+							*MenuPopup*
+MenuPopup			Just before showing the popup menu (under the
+				right mouse button).  Useful for adjusting the
+				menu for what is under the cursor or mouse
+				pointer.
+				The pattern is matched against a single
+				character representing the mode:
+					n	Normal
+					v	Visual
+					o	Operator-pending
+					i	Insert
+					c	Commmand line
+							*QuickFixCmdPre*
+QuickFixCmdPre			Before a quickfix command is run (|:make|,
+				|:grep|, |:grepadd|, |:vimgrep|,
+				|:vimgrepadd|). The pattern is matched against
+				the command being run.  When |:grep| is used
+				but 'grepprg' is set to "internal" it still
+				matches "grep".
+				This command cannot be used to set the
+				'makeprg' and 'grepprg' variables.
+				If this command causes an error, the quickfix
+				command is not executed.
+							*QuickFixCmdPost*
+QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
+				command is run.
 							*RemoteReply*
 RemoteReply			When a reply from a Vim that functions as
 				server was received |server2client()|.
@@ -531,6 +637,44 @@ RemoteReply			When a reply from a Vim that functions as
 				Note that even if an autocommand is defined,
 				the reply should be read with |remote_read()|
 				to consume it.
+							*SessionLoadPost*
+SessionLoadPost			After loading the session file created using
+				the |:mksession| command.
+							*StdinReadPost*
+StdinReadPost			After reading from the stdin into the buffer,
+				before executing the modelines.  Only used
+				when the "-" argument was used when Vim was
+				started |--|.
+							*StdinReadPre*
+StdinReadPre			Before reading from stdin into the buffer.
+				Only used when the "-" argument was used when
+				Vim was started |--|.
+							*SwapExists*
+SwapExists			Detected an existing swap file when starting
+				to edit a file.  Only when it is possible to
+				select a way to handle the situation, when Vim
+				would ask the user what to do.
+				The |v:swapname| variable holds the name of
+				the swap file found.
+				The |v:swapchoice| variable should be set to
+				a string with one character to tell what Vim
+				should do next:
+					'o'	open read-only
+					'e'	edit the file anyway
+					'r'	recover
+					'd'	delete the swap file
+					'q'	quit, don't edit the file
+					'a'	abort, like hitting CTRL-C
+				When set to an empty string the user will be
+				asked, as if there was no SwapExists autocmd.
+				Note: Do not try to change the buffer, the
+				results are unpredictable.
+							*Syntax*
+Syntax				When the 'syntax' option has been set.
+				<afile> can be used for the name of the file
+				where this option was set, and <amatch> for
+				the new value of 'syntax'.
+				See |:syn-on|.
 							*TermChanged*
 TermChanged			After the value of 'term' has changed.  Useful
 				for re-loading the syntax file to update the
@@ -541,63 +685,46 @@ TermResponse			After the response to |t_RV| is received from
 				the terminal.  The value of |v:termresponse|
 				can be used to do things depending on the
 				terminal version.
-QuickFixCmdPre						*QuickFixCmdPre*
-				Before a quickfix command is run (|:make|,
-				|:grep|, |:grepadd|, |:vimgrep|,
-				|:vimgrepadd|). The pattern is matched against
-				the command being run.  When |:grep| is used
-				but 'grepprg' is set to "internal" it still
-				matches "grep".
-				This command cannot be used to set the
-				'makeprg' and 'grepprg' variables.
-				If this command causes an error, the quickfix
-				command is not executed.
-QuickFixCmdPost						*QuickFixCmdPost*
-				like QuickFixCmdPre, but after a quickfix
-				command is run.
-							*SessionLoadPost*
-SessionLoadPost			After loading the session file created using
-				the |:mksession| command.
-							*MenuPopup*
-MenuPopup			Just before showing the popup menu (under the
-				right mouse button).  Useful for adjusting the
-				menu for what is under the cursor or mouse
-				pointer.
-				The pattern is matched against a single
-				character representing the mode:
-					n	Normal
-					v	Visual
-					o	Operator-pending
-					i	Insert
-					c	Commmand line
-							*UserGettingBored*
-UserGettingBored		When the user hits CTRL-C.  Just kidding! :-)
 							*User*
 User				Never executed automatically.  To be used for
 				autocommands that are only executed with
 				":doautocmd".
-
-You can specify a comma-separated list of event names.  No white space can be
-used in this list.  The command applies to all the events in the list.
-
-For READING FILES there are four kinds of events possible:
-	BufNewFile			starting to edit a non-existent file
-	BufReadPre	BufReadPost	starting to edit an existing file
-	FilterReadPre	FilterReadPost	read the temp file with filter output
-	FileReadPre	FileReadPost	any other file read
-Vim uses only one of these four kinds when reading a file.  The "Pre" and
-"Post" events are both triggered, before and after reading the file.
-
-Note that the autocommands for the *ReadPre events and all the Filter events
-are not allowed to change the current buffer (you will get an error message if
-this happens).  This is to prevent the file to be read into the wrong buffer.
-
-Note that the 'modified' flag is reset AFTER executing the BufReadPost
-and BufNewFile autocommands.  But when the 'modified' option was set by the
-autocommands, this doesn't happen.
-
-You can use the 'eventignore' option to ignore a number of events or all
-events.
+							*UserGettingBored*
+UserGettingBored		When the user hits CTRL-C.  Just kidding! :-)
+							*VimEnter*
+VimEnter			After doing all the startup stuff, including
+				loading .vimrc files, executing the "-c cmd"
+				arguments, creating all windows and loading
+				the buffers in them.
+							*VimLeave*
+VimLeave			Before exiting Vim, just after writing the
+				.viminfo file.  Executed only once, like
+				VimLeavePre.
+				To detect an abnormal exit use |v:dying|.
+							*VimLeavePre*
+VimLeavePre			Before exiting Vim, just before writing the
+				.viminfo file.  This is executed only once,
+				if there is a match with the name of what
+				happens to be the current buffer when exiting.
+				Mostly useful with a "*" pattern. >
+	:autocmd VimLeavePre * call CleanupStuff()
+<				To detect an abnormal exit use |v:dying|.
+							*WinEnter*
+WinEnter			After entering another window.  Not done for
+				the first window, when Vim has just started.
+				Useful for setting the window height.
+				If the window is for another buffer, Vim
+				executes the BufEnter autocommands after the
+				WinEnter autocommands.
+				Note: When using ":split fname" the WinEnter
+				event is triggered after the split but before
+				the file "fname" is loaded.
+							*WinLeave*
+WinLeave			Before leaving a window.  If the window to be
+				entered next is for a different buffer, Vim
+				executes the BufLeave autocommands before the
+				WinLeave autocommands (but not for ":new").
+				Not used for ":qa" or ":q" when exiting Vim.
 
 ==============================================================================
 6. Patterns					*autocmd-patterns* *{pat}*
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index eeb07a25..db88572b 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*      For Vim version 7.0aa.  Last change: 2005 Dec 06
+*eval.txt*      For Vim version 7.0aa.  Last change: 2005 Dec 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1272,12 +1272,13 @@ v:fcs_choice	What should happen after a |FileChangedShell| event was
 		Vim behaves like it is empty, there is no warning message.
 
 					*v:fname_in* *fname_in-variable*
-v:fname_in	The name of the input file.  Only valid while evaluating:
+v:fname_in	The name of the input file.  Valid while evaluating:
 			option		used for ~
 			'charconvert'	file to be converted
 			'diffexpr'	original file
 			'patchexpr'	original file
 			'printexpr'	file to be printed
+		And set to the swap file name for |SwapExits|.
 
 					*v:fname_out* *fname_out-variable*
 v:fname_out	The name of the output file.  Only valid while
@@ -1400,6 +1401,23 @@ v:shell_error	Result of the last shell command.  When non-zero, the last
 					*v:statusmsg* *statusmsg-variable*
 v:statusmsg	Last given status message.  It's allowed to set this variable.
 
+					*v:swapname* *swapname-variable*
+v:swapname	Only valid when executing |SwapExists| autocommands: Name of
+		the swap file found.  Read-only.
+
+					*v:swapchoice* *swapchoice-variable*
+v:swapchoice	|SwapExists| autocommands can set this to the selected choice
+		for handling an existing swap file:
+			'o'	Open read-only
+			'e'	Edit anyway
+			'r'	Recover
+			'd'	Delete swapfile
+			'q'	Quit
+			'a'	Abort
+		The value should be a single-character string.  An empty value
+		results in the user being asked, as would happen when there is
+		no SwapExists autocommand.  The default is empty.
+
 				*v:termresponse* *termresponse-variable*
 v:termresponse	The escape sequence returned by the terminal for the |t_RV|
 		termcap entry.  It is set when Vim receives an escape sequence
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 965719d2..0344a30a 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -3034,7 +3034,6 @@ CursorHold	autocmd.txt	/*CursorHold*
 CursorHold-example	windows.txt	/*CursorHold-example*
 CursorIM	mbyte.txt	/*CursorIM*
 D	change.txt	/*D*
-DCOP	gui_x11.txt	/*DCOP*
 DOS	os_dos.txt	/*DOS*
 DOS-format	editing.txt	/*DOS-format*
 DOS-format-write	editing.txt	/*DOS-format-write*
@@ -3979,6 +3978,7 @@ SessionLoad-variable	starting.txt	/*SessionLoad-variable*
 SessionLoadPost	autocmd.txt	/*SessionLoadPost*
 StdinReadPost	autocmd.txt	/*StdinReadPost*
 StdinReadPre	autocmd.txt	/*StdinReadPre*
+SwapExists	autocmd.txt	/*SwapExists*
 Syntax	autocmd.txt	/*Syntax*
 T	motion.txt	/*T*
 TCL	if_tcl.txt	/*TCL*
@@ -4197,7 +4197,6 @@ alt-input	debugger.txt	/*alt-input*
 alternate-file	editing.txt	/*alternate-file*
 amiga-window	starting.txt	/*amiga-window*
 ant.vim	syntax.txt	/*ant.vim*
-antialias	gui_x11.txt	/*antialias*
 ap	motion.txt	/*ap*
 apache.vim	syntax.txt	/*apache.vim*
 append()	eval.txt	/*append()*
@@ -4229,6 +4228,7 @@ autocmd-buflocal	autocmd.txt	/*autocmd-buflocal*
 autocmd-changes	autocmd.txt	/*autocmd-changes*
 autocmd-define	autocmd.txt	/*autocmd-define*
 autocmd-events	autocmd.txt	/*autocmd-events*
+autocmd-events-abc	autocmd.txt	/*autocmd-events-abc*
 autocmd-execute	autocmd.txt	/*autocmd-execute*
 autocmd-groups	autocmd.txt	/*autocmd-groups*
 autocmd-intro	autocmd.txt	/*autocmd-intro*
@@ -5624,7 +5624,6 @@ jumpto-diffs	diff.txt	/*jumpto-diffs*
 k	motion.txt	/*k*
 kcc	uganda.txt	/*kcc*
 kde	gui_x11.txt	/*kde*
-kde-toolbar	gui_x11.txt	/*kde-toolbar*
 key-codes	intro.txt	/*key-codes*
 key-codes-changed	version4.txt	/*key-codes-changed*
 key-mapping	map.txt	/*key-mapping*
@@ -5975,7 +5974,6 @@ new-5	version5.txt	/*new-5*
 new-6	version6.txt	/*new-6*
 new-7	version7.txt	/*new-7*
 new-GTK-GUI	version5.txt	/*new-GTK-GUI*
-new-KDE	version7.txt	/*new-KDE*
 new-MzScheme	version7.txt	/*new-MzScheme*
 new-Select-mode	version5.txt	/*new-Select-mode*
 new-View	version6.txt	/*new-View*
@@ -6570,7 +6568,9 @@ substitute-CR	version6.txt	/*substitute-CR*
 suffixes	cmdline.txt	/*suffixes*
 suspend	starting.txt	/*suspend*
 swap-file	recover.txt	/*swap-file*
+swapchoice-variable	eval.txt	/*swapchoice-variable*
 swapfile-changed	version4.txt	/*swapfile-changed*
+swapname-variable	eval.txt	/*swapname-variable*
 syn-sync-grouphere	syntax.txt	/*syn-sync-grouphere*
 syn-sync-groupthere	syntax.txt	/*syn-sync-groupthere*
 syn-sync-linecont	syntax.txt	/*syn-sync-linecont*
@@ -6992,6 +6992,8 @@ v:scrollstart	eval.txt	/*v:scrollstart*
 v:servername	eval.txt	/*v:servername*
 v:shell_error	eval.txt	/*v:shell_error*
 v:statusmsg	eval.txt	/*v:statusmsg*
+v:swapchoice	eval.txt	/*v:swapchoice*
+v:swapname	eval.txt	/*v:swapname*
 v:termresponse	eval.txt	/*v:termresponse*
 v:this_session	eval.txt	/*v:this_session*
 v:throwpoint	eval.txt	/*v:throwpoint*
@@ -7140,7 +7142,6 @@ vim-announce	intro.txt	/*vim-announce*
 vim-arguments	starting.txt	/*vim-arguments*
 vim-default-editor	gui_w32.txt	/*vim-default-editor*
 vim-dev	intro.txt	/*vim-dev*
-vim-kpart	gui_x11.txt	/*vim-kpart*
 vim-mac	intro.txt	/*vim-mac*
 vim-modes	intro.txt	/*vim-modes*
 vim-modes-intro	intro.txt	/*vim-modes-intro*
@@ -7160,7 +7161,6 @@ viminfo-file-marks	starting.txt	/*viminfo-file-marks*
 viminfo-file-name	starting.txt	/*viminfo-file-name*
 viminfo-read	starting.txt	/*viminfo-read*
 viminfo-write	starting.txt	/*viminfo-write*
-vimpart	gui_x11.txt	/*vimpart*
 vimrc	starting.txt	/*vimrc*
 vimrc-filetype	usr_05.txt	/*vimrc-filetype*
 vimrc-intro	usr_05.txt	/*vimrc-intro*
diff --git a/src/globals.h b/src/globals.h
index b589131a..ede48c6d 100644
--- a/src/globals.h
+++ b/src/globals.h
@@ -841,9 +841,12 @@ EXTERN int	msg_silent INIT(= 0);	/* don't print messages */
 EXTERN int	emsg_silent INIT(= 0);	/* don't print error messages */
 EXTERN int	cmd_silent INIT(= FALSE); /* don't echo the command line */
 
-#if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG)
-EXTERN int	swap_exists_action INIT(= 0);	/* use dialog when swap file
-						   already exists */
+#if defined(FEAT_GUI_DIALOG) || defined(FEAT_CON_DIALOG) \
+	|| defined(FEAT_AUTOCMD)
+# define HAS_SWAP_EXISTS_ACTION
+EXTERN int	swap_exists_action INIT(= SEA_NONE);
+					/* For dialog when swap file already
+					 * exists. */
 #endif
 
 EXTERN char_u	*IObuff;		/* sprintf's are done in this buffer,
diff --git a/src/proto/memline.pro b/src/proto/memline.pro
index 4f75853b..90d32855 100644
--- a/src/proto/memline.pro
+++ b/src/proto/memline.pro
@@ -1,32 +1,32 @@
 /* memline.c */
-int ml_open __ARGS((void));
-void ml_setname __ARGS((buf_T *buf));
-void ml_open_files __ARGS((void));
-void ml_open_file __ARGS((buf_T *buf));
-void check_need_swap __ARGS((int newfile));
-void ml_close __ARGS((buf_T *buf, int del_file));
-void ml_close_all __ARGS((int del_file));
-void ml_close_notmod __ARGS((void));
-void ml_timestamp __ARGS((buf_T *buf));
-void ml_recover __ARGS((void));
-int recover_names __ARGS((char_u **fname, int list, int nr));
-void ml_sync_all __ARGS((int check_file, int check_char));
-void ml_preserve __ARGS((buf_T *buf, int message));
-char_u *ml_get __ARGS((linenr_T lnum));
-char_u *ml_get_pos __ARGS((pos_T *pos));
-char_u *ml_get_curline __ARGS((void));
-char_u *ml_get_cursor __ARGS((void));
-char_u *ml_get_buf __ARGS((buf_T *buf, linenr_T lnum, int will_change));
-int ml_line_alloced __ARGS((void));
-int ml_append __ARGS((linenr_T lnum, char_u *line, colnr_T len, int newfile));
-int ml_replace __ARGS((linenr_T lnum, char_u *line, int copy));
-int ml_delete __ARGS((linenr_T lnum, int message));
-void ml_setmarked __ARGS((linenr_T lnum));
-linenr_T ml_firstmarked __ARGS((void));
-void ml_clearmarked __ARGS((void));
-char_u *makeswapname __ARGS((char_u *fname, char_u *ffname, buf_T *buf, char_u *dir_name));
-char_u *get_file_in_dir __ARGS((char_u *fname, char_u *dname));
-void ml_setflags __ARGS((buf_T *buf));
-long ml_find_line_or_offset __ARGS((buf_T *buf, linenr_T lnum, long *offp));
-void goto_byte __ARGS((long cnt));
+extern int ml_open __ARGS((void));
+extern void ml_setname __ARGS((buf_T *buf));
+extern void ml_open_files __ARGS((void));
+extern void ml_open_file __ARGS((buf_T *buf));
+extern void check_need_swap __ARGS((int newfile));
+extern void ml_close __ARGS((buf_T *buf, int del_file));
+extern void ml_close_all __ARGS((int del_file));
+extern void ml_close_notmod __ARGS((void));
+extern void ml_timestamp __ARGS((buf_T *buf));
+extern void ml_recover __ARGS((void));
+extern int recover_names __ARGS((char_u **fname, int list, int nr));
+extern void ml_sync_all __ARGS((int check_file, int check_char));
+extern void ml_preserve __ARGS((buf_T *buf, int message));
+extern char_u *ml_get __ARGS((linenr_T lnum));
+extern char_u *ml_get_pos __ARGS((pos_T *pos));
+extern char_u *ml_get_curline __ARGS((void));
+extern char_u *ml_get_cursor __ARGS((void));
+extern char_u *ml_get_buf __ARGS((buf_T *buf, linenr_T lnum, int will_change));
+extern int ml_line_alloced __ARGS((void));
+extern int ml_append __ARGS((linenr_T lnum, char_u *line, colnr_T len, int newfile));
+extern int ml_replace __ARGS((linenr_T lnum, char_u *line, int copy));
+extern int ml_delete __ARGS((linenr_T lnum, int message));
+extern void ml_setmarked __ARGS((linenr_T lnum));
+extern linenr_T ml_firstmarked __ARGS((void));
+extern void ml_clearmarked __ARGS((void));
+extern char_u *makeswapname __ARGS((char_u *fname, char_u *ffname, buf_T *buf, char_u *dir_name));
+extern char_u *get_file_in_dir __ARGS((char_u *fname, char_u *dname));
+extern void ml_setflags __ARGS((buf_T *buf));
+extern long ml_find_line_or_offset __ARGS((buf_T *buf, linenr_T lnum, long *offp));
+extern void goto_byte __ARGS((long cnt));
 /* vim: set ft=c : */
diff --git a/src/version.h b/src/version.h
index 8e3ec029..abd2d279 100644
--- a/src/version.h
+++ b/src/version.h
@@ -36,5 +36,5 @@
 #define VIM_VERSION_NODOT	"vim70aa"
 #define VIM_VERSION_SHORT	"7.0aa"
 #define VIM_VERSION_MEDIUM	"7.0aa ALPHA"
-#define VIM_VERSION_LONG	"VIM - Vi IMproved 7.0aa ALPHA (2005 Dec 6)"
-#define VIM_VERSION_LONG_DATE	"VIM - Vi IMproved 7.0aa ALPHA (2005 Dec 6, compiled "
+#define VIM_VERSION_LONG	"VIM - Vi IMproved 7.0aa ALPHA (2005 Dec 7)"
+#define VIM_VERSION_LONG_DATE	"VIM - Vi IMproved 7.0aa ALPHA (2005 Dec 7, compiled "