diff options
Diffstat (limited to 'runtime/filetype.vim')
| -rw-r--r-- | runtime/filetype.vim | 1737 |
1 files changed, 1737 insertions, 0 deletions
diff --git a/runtime/filetype.vim b/runtime/filetype.vim new file mode 100644 index 000000000..eba1c19c3 --- /dev/null +++ b/runtime/filetype.vim @@ -0,0 +1,1737 @@ +" Vim support file to detect file types +" +" Maintainer: Bram Moolenaar <Bram@vim.org> +" Last Change: 2004 Jun 10 + +" Listen very carefully, I will say this only once +if exists("did_load_filetypes") + finish +endif +let did_load_filetypes = 1 + +" Line continuation is used here, remove 'C' from 'cpoptions' +let s:cpo_save = &cpo +set cpo&vim + +augroup filetypedetect + +" Ignored extensions +au BufNewFile,BufRead *.orig,*.bak,*.old,*.new,*.rpmsave,*.rpmnew + \ exe "doau filetypedetect BufRead " . expand("<afile>:r") +au BufNewFile,BufRead *~ + \ let s:name = expand("<afile>") | + \ let s:short = substitute(s:name, '\~$', '', '') | + \ if s:name != s:short && s:short != "" | + \ exe "doau filetypedetect BufRead " . s:short | + \ endif | + \ unlet s:name | + \ unlet s:short +au BufNewFile,BufRead *.in + \ if expand("<afile>:t") != "configure.in" | + \ exe "doau filetypedetect BufRead " . expand("<afile>:r") | + \ endif + +" Pattern used to match file names which should not be inspected. +" Currently finds compressed files. +if !exists("g:ft_ignore_pat") + let g:ft_ignore_pat = '\.\(Z\|gz\|bz2\|zip\|tgz\)$' +endif + +" Abaqus or Trasys +au BufNewFile,BufRead *.inp call FTCheck_inp() + +fun! FTCheck_inp() + if getline(1) =~ '^\*' + setf abaqus + else + let n = 1 + if line("$") > 500 + let nmax = 500 + else + let nmax = line("$") + endif + while n <= nmax + if getline(n) =~? "^header surface data" + setf trasys + break + endif + let n = n + 1 + endwhile + endif +endfun + +" A-A-P recipe +au BufNewFile,BufRead *.aap setf aap + +" ABC music notation +au BufNewFile,BufRead *.abc setf abc + +" ABEL +au BufNewFile,BufRead *.abl setf abel + +" AceDB +au BufNewFile,BufRead *.wrm setf acedb + +" Ada (83, 9X, 95) +au BufNewFile,BufRead *.adb,*.ads,*.ada setf ada + +" AHDL +au BufNewFile,BufRead *.tdf setf ahdl + +" AMPL +au BufNewFile,BufRead *.run setf ampl + +" Ant +au BufNewFile,BufRead build.xml setf ant + +" Apache style config file +au BufNewFile,BufRead proftpd.conf* setf apachestyle + +" Apache config file +au BufNewFile,BufRead httpd.conf*,srm.conf*,access.conf*,.htaccess,apache.conf* setf apache + +" XA65 MOS6510 cross assembler +au BufNewFile,BufRead *.a65 setf a65 + +" Applix ELF +au BufNewFile,BufRead *.am + \ if expand("<afile>") !~? 'Makefile.am\>' | setf elf | endif + +" Arc Macro Language +au BufNewFile,BufRead *.aml setf aml + +" Arch Inventory file +au BufNewFile,BufRead .arch-inventory,=tagging-method setf arch + +" ART*Enterprise (formerly ART-IM) +au BufNewFile,BufRead *.art setf art + +" ASN.1 +au BufNewFile,BufRead *.asn,*.asn1 setf asn + +" Active Server Pages (with Visual Basic Script) +au BufNewFile,BufRead *.asa + \ if exists("g:filetype_asa") | + \ exe "setf " . g:filetype_asa | + \ else | + \ setf aspvbs | + \ endif + +" Active Server Pages (with Perl or Visual Basic Script) +au BufNewFile,BufRead *.asp + \ if exists("g:filetype_asp") | + \ exe "setf " . g:filetype_asp | + \ elseif getline(1) . getline(2) . getline(3) =~? "perlscript" | + \ setf aspperl | + \ else | + \ setf aspvbs | + \ endif + +" Grub (must be before catch *.lst) +au BufNewFile,BufRead /boot/grub/menu.lst,/boot/grub/grub.conf setf grub + +" Assembly (all kinds) +" *.lst is not pure assembly, it has two extra columns (address, byte codes) +au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call <SID>FTasm() + +" This function checks for the kind of assembly that is wanted by the user, or +" can be detected from the first five lines of the file. +fun! <SID>FTasm() + " make sure b:asmsyntax exists + if !exists("b:asmsyntax") + let b:asmsyntax = "" + endif + + if b:asmsyntax == "" + call FTCheck_asmsyntax() + endif + + " if b:asmsyntax still isn't set, default to asmsyntax or GNU + if b:asmsyntax == "" + if exists("g:asmsyntax") + let b:asmsyntax = g:asmsyntax + else + let b:asmsyntax = "asm" + endif + endif + + exe "setf " . b:asmsyntax +endfun + +fun! FTCheck_asmsyntax() + " see if file contains any asmsyntax=foo overrides. If so, change + " b:asmsyntax appropriately + let head = " ".getline(1)." ".getline(2)." ".getline(3)." ".getline(4). + \" ".getline(5)." " + if head =~ '\sasmsyntax=\S\+\s' + let b:asmsyntax = substitute(head, '.*\sasmsyntax=\(\S\+\)\s.*','\1', "") + elseif ((head =~? '\.title') || (head =~? '\.ident') || (head =~? '\.macro') || (head =~? '\.subtitle') || (head =~? '\.library')) + let b:asmsyntax = "vmasm" + endif +endfun + +" Macro (VAX) +au BufNewFile,BufRead *.mar setf vmasm + +" Atlas +au BufNewFile,BufRead *.atl,*.as setf atlas + +" Automake +au BufNewFile,BufRead [mM]akefile.am setf automake + +" Avenue +au BufNewFile,BufRead *.ave setf ave + +" Awk +au BufNewFile,BufRead *.awk setf awk + +" B +au BufNewFile,BufRead *.mch,*.ref,*.imp setf b + +" BASIC or Visual Basic +au BufNewFile,BufRead *.bas call <SID>FTVB("basic") + +" Check if one of the first five lines contains "VB_Name". In that case it is +" probably a Visual Basic file. Otherwise it's assumed to be "alt" filetype. +fun! <SID>FTVB(alt) + if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'VB_Name\|Begin VB\.\(Form\|MDIForm\|UserControl\)' + setf vb + else + exe "setf " . a:alt + endif +endfun + +" Visual Basic Script (close to Visual Basic) +au BufNewFile,BufRead *.vbs,*.dsm,*.ctl setf vb + +" Batch file for MSDOS. +au BufNewFile,BufRead *.bat,*.btm,*.sys setf dosbatch +" *.cmd is close to a Batch file, but on OS/2 Rexx files also use *.cmd. +au BufNewFile,BufRead *.cmd + \ if getline(1) =~ '^/\*' | setf rexx | else | setf dosbatch | endif + +" Batch file for 4DOS +au BufNewFile,BufRead *.btm setf btm + +" BC calculator +au BufNewFile,BufRead *.bc setf bc + +" BDF font +au BufNewFile,BufRead *.bdf setf bdf + +" BibTeX bibliography database file +au BufNewFile,BufRead *.bib setf bib + +" BIND configuration +au BufNewFile,BufRead named.conf setf named + +" BIND zone +au BufNewFile,BufRead named.root setf bindzone + +" Blank +au BufNewFile,BufRead *.bl setf blank + +" C or lpc +au BufNewFile,BufRead *.c call <SID>FTlpc() + +fun! <SID>FTlpc() + if exists("g:lpc_syntax_for_c") + let lnum = 1 + while lnum <= 12 + if getline(lnum) =~# '^\(//\|inherit\|private\|protected\|nosave\|string\|object\|mapping\|mixed\)' + setf lpc + return + endif + let lnum = lnum + 1 + endwhile + endif + setf c +endfun + +" Calendar +au BufNewFile,BufRead calendar,*/.calendar/*, + \*/share/calendar/*/calendar.*,*/share/calendar/calendar.* + \ setf calendar + +" C# +au BufNewFile,BufRead *.cs setf cs + +" Comshare Dimension Definition Language +au BufNewFile,BufRead *.cdl setf cdl + +" Controllable Regex Mutilator +au BufNewFile,BufRead *.crm setf crm + +" Cyn++ +au BufNewFile,BufRead *.cyn setf cynpp + +" Cynlib +" .cc and .cpp files can be C++ or Cynlib. +au BufNewFile,BufRead *.cc + \ if exists("cynlib_syntax_for_cc")|setf cynlib|else|setf cpp|endif +au BufNewFile,BufRead *.cpp + \ if exists("cynlib_syntax_for_cpp")|setf cynlib|else|setf cpp|endif + +" C++ +if has("fname_case") + au BufNewFile,BufRead *.cxx,*.c++,*.C,*.H,*.hh,*.hxx,*.hpp,*.moc,*.tcc,*.inl setf cpp +else + au BufNewFile,BufRead *.cxx,*.c++,*.hh,*.hxx,*.hpp,*.moc,*.tcc,*.inl setf cpp +endif + +" .h files can be C, Ch or C++, set c_syntax_for_h if you want C, +" ch_syntax_for_h if you want Ch. +au BufNewFile,BufRead *.h + \ if exists("c_syntax_for_h") | setf c | + \ elseif exists("ch_syntax_for_h") | setf ch | + \ else | setf cpp | endif + +" Ch (CHscript) +au BufNewFile,BufRead *.chf setf ch + +" TLH files are C++ headers generated by Visual C++'s #import from typelibs +au BufNewFile,BufRead *.tlh setf cpp + +" Cascading Style Sheets +au BufNewFile,BufRead *.css setf css + +" Century Term Command Scripts (*.cmd too) +au BufNewFile,BufRead *.con setf cterm + +" Changelog +au BufNewFile,BufRead changelog.Debian,changelog.dch setf debchangelog +au BufNewFile,BufRead [cC]hange[lL]og if getline(1) =~ '; urgency=' + \| setf debchangelog | else | setf changelog | endif + +" CHILL +au BufNewFile,BufRead *..ch setf chill + +" Changes for WEB and CWEB or CHILL +au BufNewFile,BufRead *.ch call <SID>FTchange() + +" This function checks if one of the first ten lines start with a '@'. In +" that case it is probably a change file. +" If the first line starts with # or ! it's probably a ch file. +" If a line has "main", "include", "//" ir "/*" it's probably ch. +" Otherwise CHILL is assumed. +fun! <SID>FTchange() + let lnum = 1 + while lnum <= 10 + if getline(lnum)[0] == '@' + setf change + return + endif + if lnum == 1 && (getline(1)[0] == '#' || getline(1)[0] == '!') + setf ch + return + endif + if getline(lnum) =~ "MODULE" + setf chill + return + endif + if getline(lnum) =~ 'main\s*(\|#\s*include\|//' + setf ch + return + endif + let lnum = lnum + 1 + endwhile + setf chill +endfun + +" Clean +au BufNewFile,BufRead *.dcl,*.icl setf clean + +" Clever +au BufNewFile,BufRead *.eni setf cl + +" Clever or dtd +au BufNewFile,BufRead *.ent call <SID>FTent() + +fun! <SID>FTent() + " This function checks for valid cl syntax in the first five lines. + " Look for either an opening comment, '#', or a block start, '{". + " If not found, assume SGML. + let lnum = 1 + while lnum < 6 + let line = getline(lnum) + if line =~ '^\s*[#{]' + setf cl + return + elseif line !~ '^\s*$' + " Not a blank line, not a comment, and not a block start, + " so doesn't look like valid cl code. + break + endif + let lnum = lnum + 1 + endw + setf dtd +endfun + +" Clipper (or FoxPro) +au BufNewFile,BufRead *.prg + \ if exists("g:filetype_prg") | + \ exe "setf " . g:filetype_prg | + \ else | + \ setf clipper | + \ endif + +" Cobol +au BufNewFile,BufRead *.cbl,*.cob,*.cpy,*.lib setf cobol + +" Cold Fusion +au BufNewFile,BufRead *.cfm,*.cfi,*.cfc setf cf + +" Configure scripts +au BufNewFile,BufRead configure.in,configure.ac setf config + +" WildPackets EtherPeek Decoder +au BufNewFile,BufRead *.dcd setf dcd + +" Enlightenment configuration files +au BufNewFile,BufRead *enlightenment/*.cfg setf c + +" Eterm +au BufNewFile,BufRead *Eterm/*.cfg setf eterm + +" Lynx config files +au BufNewFile,BufRead lynx.cfg setf lynx + +" Quake +au BufNewFile,BufRead *baseq[2-3]/*.cfg,*id1/*.cfg setf quake +au BufNewFile,BufRead *quake[1-3]/*.cfg setf quake + +" Quake C +au BufNewFile,BufRead *.qc setf c + +" Configure files +au BufNewFile,BufRead *.cfg setf cfg + +" Communicating Sequential Processes +au BufNewFile,BufRead *.csp,*.fdr setf csp + +" CUPL logic description and simulation +au BufNewFile,BufRead *.pld setf cupl +au BufNewFile,BufRead *.si setf cuplsim + +" Debian Control +au BufNewFile,BufRead */debian/control setf debcontrol + +" ROCKLinux package description +au BufNewFile,BufRead *.desc setf desc + +" the D language +au BufNewFile,BufRead *.d setf d + +" Desktop files +au BufNewFile,BufRead *.desktop,.directory setf desktop + +" Diff files +au BufNewFile,BufRead *.diff,*.rej,*.patch setf diff + +" Dircolors +au BufNewFile,BufRead .dir_colors,/etc/DIR_COLORS setf dircolors + +" Diva (with Skill) or InstallShield +au BufNewFile,BufRead *.rul + \ if getline(1).getline(2).getline(3).getline(4).getline(5).getline(6) =~? 'InstallShield' | + \ setf ishd | + \ else | + \ setf diva | + \ endif + +" DCL (Digital Command Language - vms) or DNS zone file +au BufNewFile,BufRead *.com + \ if getline(1).getline(2) =~ '$ORIGIN\|$TTL\|IN\s*SOA' + \ || getline(1).getline(2).getline(3).getline(4) =~ 'BIND.*named' + \ | setf dns | else | setf dcl | endif + +" DOT +au BufNewFile,BufRead *.dot setf dot + +" Dylan - lid files +au BufNewFile,BufRead *.lid setf dylanlid + +" Dylan - intr files (melange) +au BufNewFile,BufRead *.intr setf dylanintr + +" Dylan +au BufNewFile,BufRead *.dylan setf dylan + +" Microsoft Module Definition +au BufNewFile,BufRead *.def setf def + +" Dracula +au BufNewFile,BufRead *.drac,*.drc,*lvs,*lpe setf dracula + +" dsl +au BufNewFile,BufRead *.dsl setf dsl + +" DTD (Document Type Definition for XML) +au BufNewFile,BufRead *.dtd setf dtd + +" EDIF (*.edf,*.edif,*.edn,*.edo) +au BufNewFile,BufRead *.ed\(f\|if\|n\|o\) setf edif + +" Embedix Component Description +au BufNewFile,BufRead *.ecd setf ecd + +" Eiffel or Specman +au BufNewFile,BufRead *.e,*.E call FTCheck_e() + +" Elinks configuration +au BufNewFile,BufRead */etc/elinks.conf,*/.elinks/elinks.conf setf elinks + +fun! FTCheck_e() + let n = 1 + while n < 100 && n < line("$") + if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$" + setf specman + return + endif + let n = n + 1 + endwhile + setf eiffel +endfun + +" ERicsson LANGuage +au BufNewFile,BufRead *.erl setf erlang + +" Elm Filter Rules file +au BufNewFile,BufRead filter-rules setf elmfilt + +" ESQL-C +au BufNewFile,BufRead *.ec,*.EC setf esqlc + +" Essbase script +au BufNewFile,BufRead *.csc setf csc + +" Exim +au BufNewFile,BufRead exim.conf setf exim + +" Expect +au BufNewFile,BufRead *.exp setf expect + +" Exports +au BufNewFile,BufRead exports setf exports + +" Fetchmail RC file +au BufNewFile,BufRead .fetchmailrc setf fetchmail + +" Focus Executable +au BufNewFile,BufRead *.fex,*.focexec setf focexec + +" Focus Master file (but not for auto.master) +au BufNewFile,BufRead auto.master setf conf +au BufNewFile,BufRead *.mas,*.master setf master + +" Forth +au BufNewFile,BufRead *.fs,*.ft setf forth + +" Fortran +au BufNewFile,BufRead *.f,*.F,*.for,*.fpp,*.ftn,*.f77,*.F77,*.f90,*.F90,*.f95,*.F95 setf fortran + +" FStab +au BufNewFile,BufRead fstab setf fstab + +" GDB command files +au BufNewFile,BufRead .gdbinit setf gdb + +" GDMO +au BufNewFile,BufRead *.mo,*.gdmo setf gdmo + +" Gedcom +au BufNewFile,BufRead *.ged setf gedcom + +" Gkrellmrc +au BufNewFile,BufRead gkrellmrc,gkrellmrc_? setf gkrellmrc + +" GP scripts (2.0 and onward) +au BufNewFile,BufRead *.gp setf gp + +" GPG +au BufNewFile,BufRead */.gnupg/options setf gpg +au BufNewFile,BufRead */.gnupg/gpg.conf setf gpg +au BufNewFile,BufRead /usr/**/gnupg/options.skel setf gpg + +" Gnuplot scripts +au BufNewFile,BufRead *.gpi setf gnuplot + +" GrADS scripts +au BufNewFile,BufRead *.gs setf grads + +" Groovy +au BufNewFile,BufRead *.groovy setf groovy + +" GNU Server Pages +au BufNewFile,BufRead *.gsp setf gsp + +" GTK RC +au BufNewFile,BufRead .gtkrc,gtkrc setf gtkrc + +" Haskell +au BufNewFile,BufRead *.hs setf haskell +au BufNewFile,BufRead *.lhs setf lhaskell +au BufNewFile,BufRead *.chs setf chaskell + +" Hercules +au BufNewFile,BufRead *.vc,*.ev,*.rs,*.sum,*.errsum setf hercules + +" HEX (Intel) +au BufNewFile,BufRead *.hex,*.h32 setf hex + +" Tilde (must be before HTML) +au BufNewFile,BufRead *.t.html setf tilde + +" HTML (.shtml and .stm for server side) +au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call <SID>FTCheck_html() + +" Distinguish between HTML and XHTML +fun! <SID>FTCheck_html() + let n = 1 + while n < 10 && n < line("$") + if getline(n) =~ '\<DTD\s\+XHTML\s' + setf xhtml + return + endif + let n = n + 1 + endwhile + setf html +endfun + + +" HTML with M4 +au BufNewFile,BufRead *.html.m4 setf htmlm4 + +" HTML Cheetah template +au BufNewFile,BufRead *.tmpl setf htmlcheetah + +" Hyper Builder +au BufNewFile,BufRead *.hb setf hb + +" Icon +au BufNewFile,BufRead *.icn setf icon + +" IDL (Interface Description Language) +au BufNewFile,BufRead *.idl call <SID>FTCheck_idl() + +" Distinguish between standard IDL and MS-IDL +fun! <SID>FTCheck_idl() + let n = 1 + while n < 50 && n < line("$") + if getline(n) =~ '^\s*import\s\+"\(unknwn\|objidl\)\.idl"' + setf msidl + return + endif + let n = n + 1 + endwhile + setf idl +endfun + +" Microsoft IDL (Interface Description Language) Also *.idl +" MOF = WMI (Windows Management Instrumentation) Managed Object Format +au BufNewFile,BufRead *.odl,*.mof setf msidl + +" Icewm menu +au BufNewFile,BufRead */.icewm/menu setf icemenu + +" Inform +au BufNewFile,BufRead .indent.pro setf indent + +" IDL (Interactive Data Language) +au BufNewFile,BufRead *.pro setf idlang + +" Inform +au BufNewFile,BufRead *.inf,*.INF setf inform + +" Informix 4GL (source - canonical, include file, I4GL+M4 preproc.) +au BufNewFile,BufRead *.4gl,*.4gh,*.m4gl setf fgl + +" .INI file for MSDOS +au BufNewFile,BufRead *.ini setf dosini + +" SysV Inittab +au BufNewFile,BufRead inittab setf inittab + +" Inno Setup +au BufNewFile,BufRead *.iss setf iss + +" JAL +au BufNewFile,BufRead *.jal,*.JAL setf jal + +" Jam +au BufNewFile,BufRead *.jpl,*.jpr setf jam + +" Java +au BufNewFile,BufRead *.java,*.jav setf java + +" JavaCC +au BufNewFile,BufRead *.jj,*.jjt setf javacc + +" JavaScript +au BufNewFile,BufRead *.js,*.javascript setf javascript + +" Java Server Pages +au BufNewFile,BufRead *.jsp setf jsp + +" Java Properties resource file (note: doesn't catch font.properties.pl) +au BufNewFile,BufRead *.properties,*.properties_??,*.properties_??_??,*.properties_??_??_* setf jproperties + +" Jess +au BufNewFile,BufRead *.clp setf jess + +" Jgraph +au BufNewFile,BufRead *.jgr setf jgraph + +" Kixtart +au BufNewFile,BufRead *.kix setf kix + +" Kimwitu[++] +au BufNewFile,BufRead *.k setf kwt + +" KDE script +au BufNewFile,BufRead *.ks setf kscript + +" Lace (ISE) +au BufNewFile,BufRead *.ace,*.ACE setf lace + +" Latte +au BufNewFile,BufRead *.latte,*.lte setf latte + +" LambdaProlog (*.mod too, see Modsim) +au BufNewFile,BufRead *.sig setf lprolog + +" LDAP LDIF +au BufNewFile,BufRead *.ldif setf ldif + +" Lex +au BufNewFile,BufRead *.lex,*.l setf lex + +" Libao +au BufNewFile,BufRead /etc/libao.conf,*/.libao setf libao + +" LFTP +au BufNewFile,BufRead lftp.conf,.lftprc,*lftp/rc setf lftp + +" Lifelines (or Lex for C++!) +au BufNewFile,BufRead *.ll setf lifelines + +" Lilo: Linux loader +au BufNewFile,BufRead lilo.conf* setf lilo + +" Lisp (*.el = ELisp, *.cl = Common Lisp, *.jl = librep Lisp) +if has("fname_case") + au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.jl,*.L,.emacs,.sawfishrc setf lisp +else + au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.jl,.emacs,.sawfishrc setf lisp +endif + +" Lite +au BufNewFile,BufRead *.lite,*.lt setf lite + +" Logtalk +au BufNewFile,BufRead *.lgt setf logtalk + +" LOTOS +au BufNewFile,BufRead *.lot,*.lotos setf lotos + +" Lout (also: *.lt) +au BufNewFile,BufRead *.lou,*.lout setf lout + +" Lua +au BufNewFile,BufRead *.lua setf lua + +" Lynx style file (or LotusScript!) +au BufNewFile,BufRead *.lss setf lss + +" M4 +au BufNewFile,BufRead *.m4 + \ if expand("<afile>") !~? 'html.m4$\|fvwm2rc' | setf m4 | endif + +" MaGic Point +au BufNewFile,BufRead *.mgp setf mgp + +" Mail (for Elm, trn, mutt, rn, slrn) +au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt-*-\w\+,mutt\w\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail + +" Mailcap configuration file +au BufNewFile,BufRead .mailcap,mailcap setf mailcap + +" Makefile +au BufNewFile,BufRead *[mM]akefile,*.mk,*.mak,*.dsp setf make + +" MakeIndex +au BufNewFile,BufRead *.ist,*.mst setf ist + +" Manpage +au BufNewFile,BufRead *.man setf man + +" Maple V +au BufNewFile,BufRead *.mv,*.mpl,*.mws setf maple + +" Mason +au BufNewFile,BufRead *.mason,*.mhtml setf mason + +" Matlab or Objective C +au BufNewFile,BufRead *.m call FTCheck_m() + +fun! FTCheck_m() + let n = 1 + while n < 10 + let line = getline(n) + if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)' + setf objc + return + endif + if line =~ '^\s*%' + setf matlab + return + endif + if line =~ '^\s*(\*' + setf mma + return + endif + let n = n + 1 + endwhile + setf matlab +endfun + +" Maya Extension Language +au BufNewFile,BufRead *.mel setf mel + +" Metafont +au BufNewFile,BufRead *.mf setf mf + +" MetaPost +au BufNewFile,BufRead *.mp setf mp + +" MMIX or VMS makefile +au BufNewFile,BufRead *.mms call FTCheck_mms() + +fun! FTCheck_mms() + let n = 1 + while n < 10 + let line = getline(n) + if line =~ '^\s*\(%\|//\)' || line =~ '^\*' + setf mmix + return + endif + if line =~ '^\s*#' + setf make + return + endif + let n = n + 1 + endwhile + setf mmix +endfun + + +" Modsim III (or LambdaProlog) +au BufNewFile,BufRead *.mod + \ if getline(1) =~ '\<module\>' | + \ setf lprolog | + \ else | + \ setf modsim3 | + \ endif + +" Modula 2 +au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.md,*.mi setf modula2 + +" Modula 3 (.m3, .i3, .mg, .ig) +au BufNewFile,BufRead *.[mi][3g] setf modula3 + +" Monk +au BufNewFile,BufRead *.isc,*.monk,*.ssc,*.tsc setf monk + +" MOO +au BufNewFile,BufRead *.moo setf moo + +" Modconf +au BufNewFile,BufRead /etc/modules.conf,/etc/conf.modules setf modconf +au BufNewFile,BufRead /etc/modutils/* + \ if executable(expand("<afile>")) != 1 | setf modconf | endif + +" Mplayer config +au BufNewFile,BufRead mplayer.conf,*/.mplayer/config setf mplayerconf + +" Moterola S record +au BufNewFile,BufRead *.s19,*.s28,*.s37 setf srec + +" Msql +au BufNewFile,BufRead *.msql setf msql + +" Mysql +au BufNewFile,BufRead *.mysql setf mysql + +" M$ Resource files +au BufNewFile,BufRead *.rc setf rc + +" Mush +au BufNewFile,BufRead *.mush setf mush + +" Mutt setup file +au BufNewFile,BufRead .muttrc*,*/.mutt/muttrc*,Muttrc setf muttrc + +" Nastran input/DMAP +"au BufNewFile,BufRead *.dat setf nastran + +" Natural +au BufNewFile,BufRead *.NS[ACGLMNPS] setf natural + +" Novell netware batch files +au BufNewFile,BufRead *.ncf setf ncf + +" Nroff/Troff (*.ms and *.t are checked below) +au BufNewFile,BufRead *.me + \ if expand("<afile>") != "read.me" && expand("<afile>") != "click.me" | + \ setf nroff | + \ endif +au BufNewFile,BufRead *.tr,*.nr,*.roff,*.tmac,*.mom setf nroff +au BufNewFile,BufRead *.[1-9] call <SID>FTnroff() + +" This function checks if one of the first five lines start with a dot. In +" that case it is probably an nroff file: 'filetype' is set and 1 is returned. +fun! <SID>FTnroff() + if getline(1)[0] . getline(2)[0] . getline(3)[0] . getline(4)[0] . getline(5)[0] =~ '\.' + setf nroff + return 1 + endif + return 0 +endfun + +" Nroff or Objective C++ +au BufNewFile,BufRead *.mm call <SID>FTcheck_mm() + +fun! <SID>FTcheck_mm() + let n = 1 + while n < 10 + let line = getline(n) + if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)' + setf objcpp + return + endif + let n = n + 1 + endwhile + setf nroff +endfun + +" Not Quite C +au BufNewFile,BufRead *.nqc setf nqc + +" NSIS +au BufNewFile,BufRead *.nsi setf nsis + +" OCAML +au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly setf ocaml + +" Occam +au BufNewFile,BufRead *.occ setf occam + +" Omnimark +au BufNewFile,BufRead *.xom,*.xin setf omnimark + +" OpenROAD +au BufNewFile,BufRead *.or setf openroad + +" OPL +au BufNewFile,BufRead *.[Oo][Pp][Ll] setf opl + +" Oracle config file +au BufNewFile,BufRead *.ora setf ora + +" Packet filter conf +au BufNewFile,BufRead pf.conf setf pf + +" PApp +au BufNewFile,BufRead *.papp,*.pxml,*.pxsl setf papp + +" Pascal (also *.p) +au BufNewFile,BufRead *.pas setf pascal + +" Delphi project file +au BufNewFile,BufRead *.dpr setf pascal + +" Perl +if has("fname_case") + au BufNewFile,BufRead *.pl,*.PL call FTCheck_pl() +else + au BufNewFile,BufRead *.pl call FTCheck_pl() +endif + +fun! FTCheck_pl() + if exists("g:filetype_pl") + exe "setf " . g:filetype_pl + else + " recognize Prolog by specific text in the first non-empty line + " require a blank after the '%' because Perl uses "%list" and "%translate" + let l = getline(nextnonblank(1)) + if l =~ '\<prolog\>' || l =~ '^\s*\(%\+\(\s\|$\)\|/\*\)' || l =~ ':-' + setf prolog + else + setf perl + endif + endif +endfun + +" Perl, XPM or XPM2 +au BufNewFile,BufRead *.pm + \ if getline(1) =~ "XPM2" | + \ setf xpm2 | + \ elseif getline(1) =~ "XPM" | + \ setf xpm | + \ else | + \ setf perl | + \ endif + +" Perl POD +au BufNewFile,BufRead *.pod setf pod + +" Php3 +au BufNewFile,BufRead *.php,*.php3 setf php + +" Phtml +au BufNewFile,BufRead *.phtml setf phtml + +" Pike +au BufNewFile,BufRead *.pike,*.lpc,*.ulpc,*.pmod setf pike + +" Pinfo config +au BufNewFile,BufRead */etc/pinforc,*/.pinforc setf pinfo + +" Palm Resource compiler +au BufNewFile,BufRead *.rcp setf pilrc + +" Pine config +au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex setf pine + +" PL/M (also: *.inp) +au BufNewFile,BufRead *.plm,*.p36,*.pac setf plm + +" PL/SQL +au BufNewFile,BufRead *.pls,*.plsql setf plsql + +" PLP +au BufNewFile,BufRead *.plp setf plp + +" PO and PO template (GNU gettext) +au BufNewFile,BufRead *.po,*.pot setf po + +" Postfix main config +au BufNewFile,BufRead main.cf setf pfmain + +" PostScript (+ font files, encapsulated PostScript, Adobe Illustrator) +au BufNewFile,BufRead *.ps,*.pfa,*.afm,*.eps,*.epsf,*.epsi,*.ai setf postscr + +" PostScript Printer Description +au BufNewFile,BufRead *.ppd setf ppd + +" Povray +au BufNewFile,BufRead *.pov setf pov + +" Povray configuration +au BufNewFile,BufRead .povrayrc setf povini + +" Povray, PHP or assembly +au BufNewFile,BufRead *.inc call FTCheck_inc() + +fun! FTCheck_inc() + if exists("g:filetype_inc") + exe "setf " . g:filetype_inc + else + let lines = getline(1).getline(2).getline(3) + if lines =~? "perlscript" + setf aspperl + elseif lines =~ "<%" + setf aspvbs + elseif lines =~ "<?" + setf php + else + call FTCheck_asmsyntax() + if exists("b:asmsyntax") + exe "setf " . b:asmsyntax + else + setf pov + endif + endif + endif +endfun + +" Printcap and Termcap +au BufNewFile,BufRead *printcap + \ let b:ptcap_type = "print" | setf ptcap +au BufNewFile,BufRead *termcap + \ let b:ptcap_type = "term" | setf ptcap + +" PCCTS / ANTRL +"au BufNewFile,BufRead *.g setf antrl +au BufNewFile,BufRead *.g setf pccts + +" PPWizard +au BufNewFile,BufRead *.it,*.ih setf ppwiz + +" Oracle Pro*C/C++ +au BufNewFile,BufRead .pc setf proc + +" Procmail +au BufNewFile,BufRead .procmail,.procmailrc setf procmail + +" Progress or CWEB +au BufNewFile,BufRead *.w call <SID>FTprogress_cweb() + +function! <SID>FTprogress_cweb() + if exists("g:filetype_w") + exe "setf " . g:filetype_w + return + endif + if getline(1) =~ '&ANALYZE' || getline(3) =~ '&GLOBAL-DEFINE' + setf progress + else + setf cweb + endif +endfun + +" Progress or assembly +au BufNewFile,BufRead *.i call <SID>FTprogress_asm() + +function! <SID>FTprogress_asm() + if exists("g:filetype_i") + exe "setf " . g:filetype_i + return + endif + " This function checks for an assembly comment the first ten lines. + " If not found, assume Progress. + let lnum = 1 + while lnum <= 10 + let line = getline(lnum) + if line =~ '^\s*;' || line =~ '^\*' + call FTCheck_asm() + return + elseif line !~ '^\s*$' || line =~ '^/\*' + " Not an empty line: Doesn't look like valid assembly code. + " Or it looks like a Progress /* comment + break + endif + let lnum = lnum + 1 + endw + setf progress +endfun + +" Progress or Pascal +au BufNewFile,BufRead *.p call <SID>FTprogress_pascal() + +function! <SID>FTprogress_pascal() + if exists("g:filetype_p") + exe "setf " . g:filetype_p + return + endif + " This function checks for valid Pascal syntax in the first ten lines. + " Look for either an opening comment or a program start. + " If not found, assume Progress. + let lnum = 1 + while lnum <= 10 + let line = getline(lnum) + if line =~ '^\s*\(program\|procedure\|function\|const\|type\|var\)\>' + \ || line =~ '^\s*{' || line =~ '^\s*(\*' + setf pascal + return + elseif line !~ '^\s*$' || line =~ '^/\*' + " Not an empty line: Doesn't look like valid Pascal code. + " Or it looks like a Progress /* comment + break + endif + let lnum = lnum + 1 + endw + setf progress +endfun + + +" Software Distributor Product Specification File (POSIX 1387.2-1995) +au BufNewFile,BufRead *.psf setf psf +au BufNewFile,BufRead INDEX,INFO + \ if getline(1) =~ '^\s*\(distribution\|installed_software\|root\|bundle\|product\)\s*$' | + \ setf psf | + \ endif + +" Prolog +au BufNewFile,BufRead *.pdb setf prolog + +" Pyrex +au BufNewFile,BufRead *.pyx,*.pxd setf pyrex + +" Python +au BufNewFile,BufRead *.py,*.pyw setf python + +" Radiance +au BufNewFile,BufRead *.rad,*.mat setf radiance + +" Ratpoison config/command files +au BufNewFile,BufRead .ratpoisonrc,ratpoisonrc setf ratpoison + +" RCS file +au BufNewFile,BufRead *\,v setf rcs + +" Readline +au BufNewFile,BufRead .inputrc setf readline + +" Registry for MS-Windows +au BufNewFile,BufRead *.reg + \ if getline(1) =~? '^REGEDIT[0-9]*\s*$\|^Windows Registry Editor Version \d*\.\d*\s*$' | setf registry | endif + +" Renderman Interface Bytestream +au BufNewFile,BufRead *.rib setf rib + +" Rexx +au BufNewFile,BufRead *.rexx,*.rex setf rexx + +" R (Splus) +au BufNewFile,BufRead *.s,*.S setf r + +" Rexx, Rebol or R +au BufNewFile,BufRead *.r,*.R call <SID>FTCheck_r() + +fun! <SID>FTCheck_r() + if getline(1) =~ '^REBOL' + setf rebol + else + let n = 1 + let max = line("$") + if max > 50 + let max = 50 + endif + while n < max + " R has # comments + if getline(n) =~ '^\s*#' + setf r + break + endif + " Rexx has /* comments */ + if getline(n) =~ '^\s*/\*' + setf rexx + break + endif + let n = n + 1 + endwhile + if n >= max + setf rexx + endif + endif +endfun + +" Remind +au BufNewFile,BufRead .reminders* setf remind + +" Resolv.conf +au BufNewFile,BufRead resolv.conf setf resolv + +" Relax NG Compact +au BufNewFile,BufRead *.rnc setf rnc + +" RPL/2 +au BufNewFile,BufRead *.rpl setf rpl + +" Robots.txt +au BufNewFile,BufRead robots.txt setf robots + +" Rpcgen +au BufNewFile,BufRead *.x setf rpcgen + +" reStructuredText Documentation Format +au BufNewFile,BufRead *.rst setf rst + +" RTF +au BufNewFile,BufRead *.rtf setf rtf + +" Ruby +au BufNewFile,BufRead *.rb,*.rbw,*.gem,*.gemspec setf ruby + +" S-lang (or shader language!) +au BufNewFile,BufRead *.sl setf slang + +" Samba config +au BufNewFile,BufRead smb.conf setf samba + +" SAS script +au BufNewFile,BufRead *.sas setf sas + +" Sather +au BufNewFile,BufRead *.sa setf sather + +" Scilab +au BufNewFile,BufRead *.sci setf scilab + +" SDL +au BufNewFile,BufRead *.sdl,*.pr setf sdl + +" sed +au BufNewFile,BufRead *.sed setf sed + +" Sendmail +au BufNewFile,BufRead sendmail.cf setf sm + +" Sendmail .mc files are actually m4 +au BufNewFile,BufRead *.mc setf m4 + +" SGML +au BufNewFile,BufRead *.sgm,*.sgml + \ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'linuxdoc' | + \ setf sgmllnx | + \ elseif getline(1) =~ '<!DOCTYPE.*DocBook' || getline(2) =~ '<!DOCTYPE.*DocBook' | + \ let b:docbk_type="sgml" | + \ setf docbk | + \ else | + \ setf sgml | + \ endif + +" SGMLDECL +au BufNewFile,BufRead *.decl,*.dcl,*.dec + \ if getline(1).getline(2).getline(3) =~? '^<!SGML' | + \ setf sgmldecl | + \ endif + +" SGML catalog file +au BufNewFile,BufRead sgml.catalog*,catalog setf catalog + +" Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc. +" Gentoo ebuilds are actually bash scripts +au BufNewFile,BufRead .bashrc*,bashrc,bash.bashrc,.bash_profile*,.bash_logout*,*.bash,*.ebuild call SetFileTypeSH("bash") +au BufNewFile,BufRead .kshrc*,*.ksh call SetFileTypeSH("ksh") +au BufNewFile,BufRead /etc/profile,.profile*,*.sh,*.env call SetFileTypeSH(getline(1)) + +fun! SetFileTypeSH(name) + if a:name =~ '\<ksh\>' + let b:is_kornshell = 1 + if exists("b:is_bash") + unlet b:is_bash + endif + if exists("b:is_sh") + unlet b:is_sh + endif + elseif exists("g:bash_is_sh") || a:name =~ '\<bash\>' || a:name =~ '\<bash2\>' + let b:is_bash = 1 + if exists("b:is_kornshell") + unlet b:is_kornshell + endif + if exists("b:is_sh") + unlet b:is_sh + endif + elseif a:name =~ '\<sh\>' + let b:is_sh = 1 + if exists("b:is_kornshell") + unlet b:is_kornshell + endif + if exists("b:is_bash") + unlet b:is_bash + endif + endif + setf sh +endfun + +" tcsh scripts +au BufNewFile,BufRead .tcshrc*,*.tcsh,tcsh.tcshrc,tcsh.login setf tcsh + +" csh scripts, but might also be tcsh scripts (on some systems csh is tcsh) +au BufNewFile,BufRead .login*,.cshrc*,csh.cshrc,csh.login,csh.logout,*.csh,.alias call SetFileTypeCSH() + +fun! SetFileTypeCSH() + if exists("g:filetype_csh") + exe "setf " . g:filetype_csh + elseif &shell =~ "tcsh" + setf tcsh + else + setf csh + endif +endfun + +" Z-Shell script +au BufNewFile,BufRead .zsh*,.zlog*,.zprofile,/etc/zprofile,.zfbfmarks,.zcompdump* setf zsh + +" Scheme +au BufNewFile,BufRead *.scm,*.ss setf scheme + +" Screen RC +au BufNewFile,BufRead .screenrc,screenrc setf screen + +" Simula +au BufNewFile,BufRead *.sim setf simula + +" SINDA +au BufNewFile,BufRead *.sin,*.s85 setf sinda + +" SKILL +au BufNewFile,BufRead *.il setf skill + +" SLRN +au BufNewFile,BufRead .slrnrc setf slrnrc +au BufNewFile,BufRead *.score setf slrnsc + +" Smalltalk +au BufNewFile,BufRead *.st,*.cls setf st + +" Smarty templates +au BufNewFile,BufRead *.tpl setf smarty + +" SMIL or XML +au BufNewFile,BufRead *.smil + \ if getline(1) =~ '<?\s*xml.*?>' | + \ setf xml | + \ else | + \ setf smil | + \ endif + +" SMIL or SNMP MIB file +au BufNewFile,BufRead *.smi + \ if getline(1) =~ '\<smil\>' | + \ setf smil | + \ else | + \ setf mib | + \ endif + +" SMITH +au BufNewFile,BufRead *.smt,*.smith setf smith + +" Snobol4 +au BufNewFile,BufRead *.sno setf snobol4 + +" SNMP MIB files +au BufNewFile,BufRead *.mib,*.my setf mib + +" Snort Configuration +au BufNewFile,BufRead *.hog,snort.conf,vision.conf,*.rules setf hog + +" Spec (Linux RPM) +au BufNewFile,BufRead *.spec setf spec + +" Speedup (AspenTech plant simulator) +au BufNewFile,BufRead *.speedup,*.spdata,*.spd setf spup + +" Slice +au BufNewFile,BufRead *.ice setf slice + +" Spice +au BufNewFile,BufRead *.sp,*.spice setf spice + +" Spyce +au BufNewFile,BufRead *.spy,*.spi setf spyce + +" Squid +au BufNewFile,BufRead squid.conf setf squid + +" SQL (all but the first one for Oracle Designer) +au BufNewFile,BufRead *.sql,*.tyb,*.typ,*.tyc,*.pkb,*.pks setf sql + +" SQLJ +au BufNewFile,BufRead *.sqlj setf sqlj + +" SQR +au BufNewFile,BufRead *.sqr,*.sqi setf sqr + +" OpenSSH configuration +au BufNewFile,BufRead ssh_config,*/.ssh/config setf sshconfig + +" OpenSSH server configuration +au BufNewFile,BufRead sshd_config setf sshdconfig + +" Stored Procedures +au BufNewFile,BufRead *.stp setf stp + +" Standard ML +au BufNewFile,BufRead *.sml setf sml + +" Tads (or Nroff) +au BufNewFile,BufRead *.t + \ if !<SID>FTnroff() | setf tads | endif + +" Tags +au BufNewFile,BufRead tags setf tags + +" TAK +au BufNewFile,BufRead *.tak setf tak + +" Tcl +au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk setf tcl + +" TealInfo +au BufNewFile,BufRead *.tli setf tli + +" Telix Salt +au BufNewFile,BufRead *.slt setf tsalt + +" Terminfo +au BufNewFile,BufRead *.ti setf terminfo + +" TeX +au BufNewFile,BufRead *.tex,*.latex,*.sty,*.dtx,*.ltx,*.bbl setf tex + +" Texinfo +au BufNewFile,BufRead *.texinfo,*.texi,*.txi setf texinfo + +" TeX configuration +au BufNewFile,BufRead texmf.cnf setf texmf + +" Tidy config +au BufNewFile,BufRead .tidyrc,tidyrc setf tidy + +" TF mud client +au BufNewFile,BufRead *.tf,.tfrc,tfrc setf tf + +" TSS - Geometry +au BufNewFile,BufReadPost *.tssgm setf tssgm + +" TSS - Optics +au BufNewFile,BufReadPost *.tssop setf tssop + +" TSS - Command Line (temporary) +au BufNewFile,BufReadPost *.tsscl setf tsscl + +" Motif UIT/UIL files +au BufNewFile,BufRead *.uit,*.uil setf uil + +" UnrealScript +au BufNewFile,BufRead *.uc setf uc + +" Verilog HDL +au BufNewFile,BufRead *.v setf verilog + +" VHDL +au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vhdl_[0-9]*,*.vbe,*.vst setf vhdl + +" Vim script +au BufNewFile,BufRead *.vim,.exrc,_exrc setf vim + +" Viminfo file +au BufNewFile,BufRead .viminfo,_viminfo setf viminfo + +" Virata Config Script File +au BufRead,BufNewFile *.hw,*.module,*.pkg setf virata + +" Visual Basic (also uses *.bas) or FORM +au BufNewFile,BufRead *.frm call <SID>FTVB("form") + +" SaxBasic is close to Visual Basic +au BufNewFile,BufRead *.sba setf vb + +" Vgrindefs file +au BufNewFile,BufRead vgrindefs setf vgrindefs + +" VRML V1.0c +au BufNewFile,BufRead *.wrl setf vrml + +" Webmacro +au BufNewFile,BufRead *.wm setf webmacro + +" Wget config +au BufNewFile,BufRead .wgetrc,wgetrc setf wget + +" Website MetaLanguage +au BufNewFile,BufRead *.wml setf wml + +" Winbatch +au BufNewFile,BufRead *.wbt setf winbatch + +" WvDial +au BufNewFile,BufRead wvdial.conf,.wvdialrc setf wvdial + +" CVS RC file +au BufNewFile,BufRead .cvsrc setf cvsrc + +" CVS commit file +au BufNewFile,BufRead cvs\d\+ setf cvs + +" WEB (*.web is also used for Winbatch: Guess, based on expecting "%" comment +" lines in a WEB file). +au BufNewFile,BufRead *.web + \ if getline(1)[0].getline(2)[0].getline(3)[0].getline(4)[0].getline(5)[0] =~ "%" | + \ setf web | + \ else | + \ setf winbatch | + \ endif + +" Windows Scripting Host and Windows Script Component +au BufNewFile,BufRead *.ws[fc] setf wsh + +" X Pixmap (dynamically sets colors, use BufEnter to make it work better) +au BufEnter *.xpm + \ if getline(1) =~ "XPM2" | + \ setf xpm2 | + \ else | + \ setf xpm | + \ endif +au BufEnter *.xpm2 setf xpm2 + +" XFree86 config +au BufNewFile,BufRead XF86Config + \ if getline(1) =~ '\<XConfigurator\>' | + \ let b:xf86c_xfree86_version = 3 | + \ endif | + \ setf xf86conf + +" Xorg config +au BufNewFile,BufRead xorg.conf,xorg.conf-4 let b:xf86c_xfree86_version = 4 | setf xf86conf + +" XS Perl extension interface language +au BufNewFile,BufRead *.xs setf xs + +" X resources file +au BufNewFile,BufRead .Xdefaults,.Xpdefaults,.Xresources,xdm-config,*.ad setf xdefaults + +" Xmath +au BufNewFile,BufRead *.msc,*.msf setf xmath +au BufNewFile,BufRead *.ms + \ if !<SID>FTnroff() | setf xmath | endif + +" XML +au BufNewFile,BufRead *.xml + \ if getline(1) . getline(2) . getline(3) =~ '<!DOCTYPE.*DocBook' | + \ let b:docbk_type="xml" | + \ setf docbk | + \ else | + \ setf xml | + \ endif + +" XMI (holding UML models) is also XML +au BufNewFile,BufRead *.xmi setf xml + +" CSPROJ files are Visual Studio.NET's XML-based project config files +au BufNewFile,BufRead *.csproj,*.csproj.user setf xml + +" Qt Linguist translation source and Qt User Interface Files are XML +au BufNewFile,BufRead *.ts,*.ui setf xml + +" XSD +au BufNewFile,BufRead *.xsd setf xsd + +" Xslt +au BufNewFile,BufRead *.xsl,*.xslt setf xslt + +" Yacc +au BufNewFile,BufRead *.y,*.yy setf yacc + +" Yaml +au BufNewFile,BufRead *.yaml,*.yml setf yaml + +" Z80 assembler asz80 +au BufNewFile,BufRead *.z8a setf z8a + +augroup END + + +" Source the user-specified filetype file, for backwards compatibility with +" Vim 5.x. +if exists("myfiletypefile") && file_readable(expand(myfiletypefile)) + execute "source " . myfiletypefile +endif + + +" Check for "*" after loading myfiletypefile, so that scripts.vim is only used +" when there are no matching file name extensions. +" Don't do this for compressed files. +augroup filetypedetect +au BufNewFile,BufRead * + \ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat + \ | runtime! scripts.vim | endif +au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif + + +" Extra checks for when no filetype has been detected now. Mostly used for +" patterns that end in "*". E.g., "zsh*" matches "zsh.vim", but that's a Vim +" script file. + +" BIND zone +au BufNewFile,BufRead /var/named/* setf bindzone + +" Changelog +au BufNewFile,BufRead [cC]hange[lL]og* if getline(1) =~ '; urgency=' + \| setf debchangelog | else | setf changelog | endif + +" Crontab +au BufNewFile,BufRead crontab,crontab.* setf crontab + +" Dracula +au BufNewFile,BufRead drac.* setf dracula + +" Fvwm +au BufNewFile,BufRead *fvwmrc*,*fvwm95*.hook + \ let b:fvwm_version = 1 | setf fvwm +au BufNewFile,BufRead *fvwm2rc* + \ if expand("<afile>:e") == "m4" | setf fvwm2m4 | else | + \ let b:fvwm_version = 2 | setf fvwm | endif + +" GTK RC +au BufNewFile,BufRead .gtkrc*,gtkrc* setf gtkrc + +" Jam +au BufNewFile,BufRead Prl*.*,JAM*.* setf jam + +" Jargon +au! BufNewFile,BufRead *jarg* + \ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'THIS IS THE JARGON FILE' | + \ setf jargon | + \ endif + +" Makefile +au BufNewFile,BufRead [mM]akefile* setf make + +" Ruby Makefile +au BufNewFile,BufRead [rR]akefile* setf ruby + +" Mutt setup file +au BufNewFile,BufRead muttrc*,Muttrc* setf muttrc + +" Nroff macros +au BufNewFile,BufRead tmac.* setf nroff + +" Printcap and Termcap +au BufNewFile,BufRead *printcap* + \ if !did_filetype() | let b:ptcap_type = "print" | setf ptcap | endif +au BufNewFile,BufRead *termcap* + \ if !did_filetype() | let b:ptcap_type = "term" | setf ptcap | endif + +" Vim script +au BufNewFile,BufRead *vimrc* setf vim + +" Subversion commit file +au BufNewFile,BufRead svn-commit.*.tmp setf svn + +" X resources file +au BufNewFile,BufRead Xresources*,*/app-defaults/*,*/Xresources/* setf xdefaults + +" XFree86 config +au BufNewFile,BufRead XF86Config-4* + \ let b:xf86c_xfree86_version = 4 | setf xf86conf +au BufNewFile,BufRead XF86Config* + \ if getline(1) =~ '\<XConfigurator\>' | + \ let b:xf86c_xfree86_version = 3 | + \ endif | + \ setf xf86conf + +" X11 xmodmap +au BufNewFile,BufRead *xmodmap* setf xmodmap + +" Z-Shell script +au BufNewFile,BufRead zsh*,zlog* setf zsh + + +" Generic configuration file (check this last, it's just guessing!) +au BufNewFile,BufRead,StdinReadPost * + \ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat + \ && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#' + \ || getline(4) =~ '^#' || getline(5) =~ '^#') | + \ setf conf | + \ endif + +" Use the plugin-filetype checks last, they may overrule any of the previously +" detected filetypes. +runtime! ftdetect/*.vim + +augroup END + + +" If the GUI is already running, may still need to install the Syntax menu. +" Don't do it when the 'M' flag is included in 'guioptions'. +if has("menu") && has("gui_running") + \ && !exists("did_install_syntax_menu") && &guioptions !~# "M" + source <sfile>:p:h/menu.vim +endif + +" Restore 'cpoptions' +let &cpo = s:cpo_save +unlet s:cpo_save |