updated for version 7.4.496v7.4.496

Problem:    Many lines are both in Make_cyg.mak and Make_ming.mak
Solution:   Move the common parts to one file. (Ken Takata)

1 files changed, 18 insertions, 799 deletions

diff --git a/src/Make_ming.mak b/src/Make_ming.mak
index 19b4c2fe3..9ed1a7000 100644
--- a/src/Make_ming.mak
+++ b/src/Make_ming.mak
@@ -1,193 +1,27 @@
-# Makefile for VIM on Win32
 #
-# Info at http://www.mingw.org
-# Alternative x86 and 64-builds: http://mingw-w64.sourceforge.net
-# Also requires GNU make, which you can download from the same sites.
-# Get missing libraries from http://gnuwin32.sf.net.
+# Makefile for VIM on Win32, using MinGW
 #
-# Tested on Win32 NT 4 and Win95.
+# Also read INSTALLpc.txt!
 #
-# To make everything, just 'make -f Make_ming.mak'.
-# To make just e.g. gvim.exe, 'make -f Make_ming.mak gvim.exe'.
-# After a run, you can 'make -f Make_ming.mak clean' to clean up.
+# The old Make_ming.mak (maintained by Ron Aaron et al.) was merged into
+# Make_cyg_ming.mak.
+# This file contains MinGW specific settings. Common settings are contained
+# in Make_cyg_ming.mak.
 #
-# NOTE: Sometimes 'GNU Make' will stop after building vimrun.exe -- I think
-# it's just run out of memory or something.  Run again, and it will continue
-# with 'xxd'.
-#
-# "make upx" makes *compressed* versions of the 32 bit GUI and console EXEs,
-# using the excellent UPX compressor:
-#     http://upx.sourceforge.net/
-# "make mpress" uses the MPRESS compressor for 32- and 64-bit EXEs:
-#     http://www.matcode.com/mpress.htm
-#
-# Maintained by Ron Aaron <ronaharon@yahoo.com> et al.
-# Updated 2014 Oct 13.
-
-#>>>>> choose options:
-# set to yes for a debug build
-DEBUG=no
-# set to SIZE for size, SPEED for speed, MAXSPEED for maximum optimization
-OPTIMIZE=MAXSPEED
-# set to yes to make gvim, no for vim
-GUI=yes
-# set to yes if you want to use DirectWrite (DirectX)
-DIRECTX=no
-# FEATURES=[TINY | SMALL  | NORMAL | BIG | HUGE]
-# Set to TINY to make minimal version (few features).
-FEATURES=BIG
-# Set to one of i386, i486, i586, i686 as the minimum target processor.
-# For amd64/x64 architecture set ARCH=x86-64 .
-ARCH=i386
-# Set to yes to cross-compile from unix; no=native Windows.
-CROSS=no
-# Set to path to iconv.h and libiconv.a to enable using 'iconv.dll'.
-#ICONV="."
-ICONV=yes
-GETTEXT=yes
-# Set to yes to include multibyte support.
-MBYTE=yes
-# Set to yes to include IME support.
-IME=yes
-DYNAMIC_IME=yes
-# Set to yes to enable writing a postscript file with :hardcopy.
-POSTSCRIPT=no
-# Set to yes to enable OLE support.
-OLE=no
-# Set the default $(WINVER) to make it work with pre-Win2k.
-ifndef WINVER
-WINVER = 0x0500
-endif
-# Set to yes to enable Cscope support.
-CSCOPE=yes
-# Set to yes to enable Netbeans support.
-NETBEANS=$(GUI)
-
-
-# Link against the shared version of libstdc++ by default.  Set
-# STATIC_STDCPLUS to "yes" to link against static version instead.
-ifndef STATIC_STDCPLUS
-STATIC_STDCPLUS=no
-endif
-
-# If the user doesn't want gettext, undefine it.
-ifeq (no, $(GETTEXT))
-GETTEXT=
-endif
-# Added by E.F. Amatria <eferna1@platea.ptic.mec.es> 2001 Feb 23
-# Uncomment the first line and one of the following three if you want Native Language
-# Support.  You'll need gnu_gettext.win32, a MINGW32 Windows PORT of gettext by
-# Franco Bez <franco.bez@gmx.de>.  It may be found at
-# http://home.a-city.de/franco.bez/gettext/gettext_win32_en.html
-# Tested with mingw32 with GCC-2.95.2 on Win98
-# Updated 2001 Jun 9
-#GETTEXT=c:/gettext.win32.msvcrt
-#STATIC_GETTEXT=USE_STATIC_GETTEXT
-#DYNAMIC_GETTEXT=USE_GETTEXT_DLL
-#DYNAMIC_GETTEXT=USE_SAFE_GETTEXT_DLL
-SAFE_GETTEXT_DLL_OBJ = $(GETTEXT)/src/safe_gettext_dll/safe_gettext_dll.o
-# Alternatively, if you uncomment the two following lines, you get a "safe" version
-# without linking the safe_gettext_dll.o object file.
-#DYNAMIC_GETTEXT=DYNAMIC_GETTEXT
-#GETTEXT_DYNAMIC=gnu_gettext.dll
-INTLPATH=$(GETTEXT)/lib/mingw32
-INTLLIB=gnu_gettext
+# Last updated by Ken Takata.
+# Last Change: 2014 Oct 21
 
-# If you are using gettext-0.10.35 from http://sourceforge.net/projects/gettext
-# or gettext-0.10.37 from http://sourceforge.net/projects/mingwrep/
-# uncomment the following, but I can't build a static version with them, ?-(|
-#GETTEXT=c:/gettext-0.10.37-20010430
-#STATIC_GETTEXT=USE_STATIC_GETTEXT
-#DYNAMIC_GETTEXT=DYNAMIC_GETTEXT
-#INTLPATH=$(GETTEXT)/lib
-#INTLLIB=intl
 
 # uncomment 'PERL' if you want a perl-enabled version
-#PERL=C:/perl
-ifdef PERL
-ifndef PERL_VER
-PERL_VER=56
-endif
-ifndef DYNAMIC_PERL
-DYNAMIC_PERL=yes
-endif
-# on Linux, for cross-compile, it's here:
-#PERLLIB=/home/ron/ActivePerl/lib
-# on NT, it's here:
-PERLLIB=$(PERL)/lib
-PERLLIBS=$(PERLLIB)/Core
-XSUBPPTRY=$(PERLLIB)/ExtUtils/xsubpp
-XSUBPP_EXISTS=$(shell perl -e "print 1 unless -e '$(XSUBPPTRY)'")
-ifeq "$(XSUBPP_EXISTS)" ""
-XSUBPP=perl $(XSUBPPTRY)
-else
-XSUBPP=xsubpp
-endif
-endif
+#PERL=c:/perl
 
 # uncomment 'LUA' if you want a Lua-enabled version
-#LUA=/usr/local
-ifdef LUA
-ifndef DYNAMIC_LUA
-DYNAMIC_LUA=yes
-endif
-
-ifndef LUA_VER
-LUA_VER=51
-endif
-
-ifeq (no,$(DYNAMIC_LUA))
-LUA_LIB = -L$(LUA)/lib -llua
-endif
-
-endif
+#LUA=c:/lua
 
 # uncomment 'MZSCHEME' if you want a MzScheme-enabled version
 #MZSCHEME=d:/plt
-ifdef MZSCHEME
-ifndef DYNAMIC_MZSCHEME
-DYNAMIC_MZSCHEME=yes
-endif
-
-ifndef MZSCHEME_VER
-MZSCHEME_VER=205_000
-endif
-
-ifndef MZSCHEME_PRECISE_GC
-MZSCHEME_PRECISE_GC=no
-endif
-
-# for version 4.x we need to generate byte-code for Scheme base
-ifndef MZSCHEME_GENERATE_BASE
-MZSCHEME_GENERATE_BASE=no
-endif
 
-ifndef MZSCHEME_USE_RACKET
-MZSCHEME_MAIN_LIB=mzsch
-else
-MZSCHEME_MAIN_LIB=racket
-endif
-
-ifeq (no,$(DYNAMIC_MZSCHEME))
-ifeq (yes,$(MZSCHEME_PRECISE_GC))
-MZSCHEME_LIB=-l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER)
-else
-MZSCHEME_LIB = -l$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER) -lmzgc$(MZSCHEME_VER)
-endif
-# the modern MinGW can dynamically link to dlls directly.
-# point MZSCHEME_DLLS to where you put libmzschXXXXXXX.dll and libgcXXXXXXX.dll
-ifndef MZSCHEME_DLLS
-MZSCHEME_DLLS=$(MZSCHEME)
-endif
-MZSCHEME_LIBDIR=-L$(MZSCHEME_DLLS) -L$(MZSCHEME_DLLS)\lib
-endif
-
-endif
-
-# Python support -- works with the ActiveState python 2.0 release (and others
-# too, probably)
-#
-# uncomment 'PYTHON' to make python-enabled version
+# uncomment 'PYTHON' if you want a python-enabled version
 # Put the path to the python distro here.  If cross compiling from Linux, you
 # will also need to convert the header files to unix instead of dos format:
 #   for fil in *.h ; do vim -e -c 'set ff=unix|w|q' $fil
@@ -200,631 +34,16 @@ endif
 # on my NT box, it's here:
 #PYTHON=c:/python20
 
-ifdef PYTHON
-ifndef DYNAMIC_PYTHON
-DYNAMIC_PYTHON=yes
-endif
-
-ifndef PYTHON_VER
-PYTHON_VER=22
-endif
-
-ifeq (no,$(DYNAMIC_PYTHON))
-PYTHONLIB=-L$(PYTHON)/libs -lpython$(PYTHON_VER)
-endif
-# my include files are in 'win32inc' on Linux, and 'include' in the standard
-# NT distro (ActiveState)
-ifeq ($(CROSS),no)
-PYTHONINC=-I $(PYTHON)/include
-else
-PYTHONINC=-I $(PYTHON)/win32inc
-endif
-endif
-
-#PYTHON3: See comment for Python 2 above
-
-ifdef PYTHON3
-ifndef DYNAMIC_PYTHON3
-DYNAMIC_PYTHON3=yes
-endif
-
-ifndef PYTHON3_VER
-PYTHON3_VER=31
-endif
-
-ifeq (no,$(DYNAMIC_PYTHON3))
-PYTHON3LIB=-L$(PYTHON3)/libs -lPYTHON$(PYTHON3_VER)
-endif
-
-ifeq ($(CROSS),no)
-PYTHON3INC=-I $(PYTHON3)/include
-else
-PYTHON3INC=-I $(PYTHON3)/win32inc
-endif
-endif
+# uncomment 'PYTHON3' if you want a python3-enabled version
+#PYTHON3=c:/python31
 
-#	TCL interface:
-#	  TCL=[Path to TCL directory]
-#	  DYNAMIC_TCL=yes (to load the TCL DLL dynamically)
-#	  TCL_VER=[TCL version, eg 83, 84] (default is 83)
+# uncomment 'TCL' if you want a Tcl-enabled version
 #TCL=c:/tcl
-ifdef TCL
-ifndef DYNAMIC_TCL
-DYNAMIC_TCL=yes
-endif
-ifndef TCL_VER
-TCL_VER = 83
-endif
-TCLINC += -I$(TCL)/include
-endif
 
-
-#	Ruby interface:
-#	  RUBY=[Path to Ruby directory]
-#	  DYNAMIC_RUBY=yes (to load the Ruby DLL dynamically)
-#	  RUBY_VER=[Ruby version, eg 16, 17] (default is 16)
-#	  RUBY_VER_LONG=[Ruby version, eg 1.6, 1.7] (default is 1.6)
-#	    You must set RUBY_VER_LONG when changing RUBY_VER.
-#	    You must set RUBY_API_VER version to RUBY_VER_LONG.
-#	    Don't set ruby API version to RUBY_VER like 191.
+# uncomment 'RUBY' if you want a Ruby-enabled version
 #RUBY=c:/ruby
-ifdef RUBY
-ifndef DYNAMIC_RUBY
-DYNAMIC_RUBY=yes
-endif
-#  Set default value
-ifndef RUBY_VER
-RUBY_VER = 16
-endif
-ifndef RUBY_VER_LONG
-RUBY_VER_LONG = 1.6
-endif
-ifndef RUBY_API_VER
-RUBY_API_VER = $(subst .,,$(RUBY_VER_LONG))
-endif
-
-ifndef RUBY_PLATFORM
-ifeq ($(RUBY_VER), 16)
-RUBY_PLATFORM = i586-mswin32
-else
-ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/i386-mingw32),)
-RUBY_PLATFORM = i386-mingw32
-else
-ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/x64-mingw32),)
-RUBY_PLATFORM = x64-mingw32
-else
-RUBY_PLATFORM = i386-mswin32
-endif
-endif
-endif
-endif
-
-ifndef RUBY_INSTALL_NAME
-ifeq ($(RUBY_VER), 16)
-RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_API_VER)
-else
-ifeq ($(ARCH),x86-64)
-RUBY_INSTALL_NAME = x64-msvcrt-ruby$(RUBY_API_VER)
-else
-RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_API_VER)
-endif
-endif
-endif
-
-ifeq (19, $(word 1,$(sort 19 $(RUBY_VER))))
-RUBY_19_OR_LATER = 1
-endif
-
-RUBYINC = -I $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/$(RUBY_PLATFORM)
-ifdef RUBY_19_OR_LATER
-RUBYINC += -I $(RUBY)/include/ruby-$(RUBY_VER_LONG) -I $(RUBY)/include/ruby-$(RUBY_VER_LONG)/$(RUBY_PLATFORM)
-endif
-ifeq (no, $(DYNAMIC_RUBY))
-RUBYLIB = -L$(RUBY)/lib -l$(RUBY_INSTALL_NAME)
-endif
-
-endif # RUBY
-
-# See feature.h for a list of options.
-# Any other defines can be included here.
-DEF_GUI=-DFEAT_GUI_W32 -DFEAT_CLIPBOARD
-DEFINES=-DWIN32 -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER) \
-	-DHAVE_PATHDEF -DFEAT_$(FEATURES)
-ifeq ($(ARCH),x86-64)
-DEFINES+=-DMS_WIN64
-endif
-ifeq ($(CROSS),yes)
-# cross-compiler prefix:
-CROSS_COMPILE = i586-pc-mingw32msvc-
-DEL = rm
-MKDIR = mkdir -p
-DIRSLASH = /
-else
-# normal (Windows) compilation:
-CROSS_COMPILE =
-ifneq (sh.exe, $(SHELL))
-DEL = rm
-MKDIR = mkdir -p
-DIRSLASH = /
-else
-DEL = del
-MKDIR = mkdir
-DIRSLASH = \\
-endif
-endif
-CC := $(CROSS_COMPILE)gcc
-WINDRES := $(CROSS_COMPILE)windres
-WINDRES_CC = $(CC)
-
-#>>>>> end of choices
-###########################################################################
-
-CFLAGS = -Iproto $(DEFINES) -pipe -w -march=$(ARCH) -Wall
-WINDRES_FLAGS = --preprocessor="$(WINDRES_CC) -E -xc" -DRC_INVOKED
-EXTRA_LIBS =
-
-ifdef GETTEXT
-DEFINES += -DHAVE_GETTEXT -DHAVE_LOCALE_H
-GETTEXTINCLUDE = $(GETTEXT)/include
-GETTEXTLIB = $(INTLPATH)
-ifeq (yes, $(GETTEXT))
-DEFINES += -DDYNAMIC_GETTEXT
-else
-ifdef DYNAMIC_GETTEXT
-DEFINES += -D$(DYNAMIC_GETTEXT)
-ifdef GETTEXT_DYNAMIC
-DEFINES += -DGETTEXT_DYNAMIC -DGETTEXT_DLL=\"$(GETTEXT_DYNAMIC)\"
-endif
-endif
-endif
-endif
-
-ifdef PERL
-CFLAGS += -I$(PERLLIBS) -DFEAT_PERL
-ifeq (yes, $(DYNAMIC_PERL))
-CFLAGS += -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl$(PERL_VER).dll\"
-EXTRA_LIBS += -L$(PERLLIBS) -lperl$(PERL_VER)
-endif
-endif
-
-ifdef LUA
-CFLAGS += -I$(LUA)/include -DFEAT_LUA
-ifeq (yes, $(DYNAMIC_LUA))
-CFLAGS += -DDYNAMIC_LUA -DDYNAMIC_LUA_DLL=\"lua$(LUA_VER).dll\"
-endif
-endif
-
-ifdef MZSCHEME
-CFLAGS += -I$(MZSCHEME)/include -DFEAT_MZSCHEME -DMZSCHEME_COLLECTS=\"$(MZSCHEME)/collects\"
-ifeq (yes, $(DYNAMIC_MZSCHEME))
-CFLAGS += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"lib$(MZSCHEME_MAIN_LIB)$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"libmzgc$(MZSCHEME_VER).dll\"
-endif
-ifeq (yes, "$(MZSCHEME_DEBUG)")
-CFLAGS += -DMZSCHEME_FORCE_GC
-endif
-endif
-
-ifdef RUBY
-CFLAGS += -DFEAT_RUBY $(RUBYINC)
-ifeq (yes, $(DYNAMIC_RUBY))
-CFLAGS += -DDYNAMIC_RUBY -DDYNAMIC_RUBY_DLL=\"$(RUBY_INSTALL_NAME).dll\"
-CFLAGS += -DDYNAMIC_RUBY_VER=$(RUBY_VER)
-endif
-endif
-
-ifdef PYTHON
-CFLAGS += -DFEAT_PYTHON 
-ifeq (yes, $(DYNAMIC_PYTHON))
-CFLAGS += -DDYNAMIC_PYTHON
-endif
-endif
-
-ifdef PYTHON3 
-CFLAGS += -DFEAT_PYTHON3 
-ifeq (yes, $(DYNAMIC_PYTHON3))
-CFLAGS += -DDYNAMIC_PYTHON3 
-endif
-endif
-
-ifdef TCL
-CFLAGS += -DFEAT_TCL $(TCLINC)
-ifeq (yes, $(DYNAMIC_TCL))
-CFLAGS += -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl$(TCL_VER).dll\"
-endif
-endif
-
-ifeq ($(POSTSCRIPT),yes)
-DEFINES += -DMSWINPS
-endif
-
-ifeq (yes, $(OLE))
-DEFINES += -DFEAT_OLE
-endif
-
-ifeq ($(CSCOPE),yes)
-DEFINES += -DFEAT_CSCOPE
-endif
-
-ifeq ($(NETBEANS),yes)
-# Only allow NETBEANS for a GUI build.
-ifeq (yes, $(GUI))
-DEFINES += -DFEAT_NETBEANS_INTG
-
-ifeq ($(NBDEBUG), yes)
-DEFINES += -DNBDEBUG
-NBDEBUG_INCL = nbdebug.h
-NBDEBUG_SRC = nbdebug.c
-endif
-endif
-endif
-
-# DirectWrite (DirectX)
-ifeq ($(DIRECTX),yes)
-# Only allow DirectWrite for a GUI build.
-ifeq (yes, $(GUI))
-DEFINES += -DFEAT_DIRECTX -DDYNAMIC_DIRECTX
-endif
-endif
-
-# Only allow XPM for a GUI build.
-ifeq (yes, $(GUI))
-
-ifndef XPM
-ifeq ($(ARCH),i386)
-XPM = xpm/x86
-endif
-ifeq ($(ARCH),i486)
-XPM = xpm/x86
-endif
-ifeq ($(ARCH),i586)
-XPM = xpm/x86
-endif
-ifeq ($(ARCH),i686)
-XPM = xpm/x86
-endif
-ifeq ($(ARCH),x86-64)
-XPM = xpm/x64
-endif
-endif
-ifdef XPM
-ifneq ($(XPM),no)
-CFLAGS += -DFEAT_XPM_W32 -I $(XPM)/include -I $(XPM)/../include
-endif
-endif
-
-endif
-
-ifeq ($(DEBUG),yes)
-CFLAGS += -g -fstack-check
-DEBUG_SUFFIX=d
-else
-ifeq ($(OPTIMIZE), SIZE)
-CFLAGS += -Os
-else
-ifeq ($(OPTIMIZE), MAXSPEED)
-CFLAGS += -O3
-CFLAGS += -fomit-frame-pointer -freg-struct-return
-else  # SPEED
-CFLAGS += -O2
-endif
-endif
-CFLAGS += -s
-endif
-
-LIB = -lkernel32 -luser32 -lgdi32 -ladvapi32 -lcomdlg32 -lcomctl32 -lversion
-GUIOBJ =  $(OUTDIR)/gui.o $(OUTDIR)/gui_w32.o $(OUTDIR)/gui_beval.o $(OUTDIR)/os_w32exe.o
-OBJ = \
-	$(OUTDIR)/blowfish.o \
-	$(OUTDIR)/buffer.o \
-	$(OUTDIR)/charset.o \
-	$(OUTDIR)/crypt.o \
-	$(OUTDIR)/crypt_zip.o \
-	$(OUTDIR)/diff.o \
-	$(OUTDIR)/digraph.o \
-	$(OUTDIR)/edit.o \
-	$(OUTDIR)/eval.o \
-	$(OUTDIR)/ex_cmds.o \
-	$(OUTDIR)/ex_cmds2.o \
-	$(OUTDIR)/ex_docmd.o \
-	$(OUTDIR)/ex_eval.o \
-	$(OUTDIR)/ex_getln.o \
-	$(OUTDIR)/fileio.o \
-	$(OUTDIR)/fold.o \
-	$(OUTDIR)/getchar.o \
-	$(OUTDIR)/hardcopy.o \
-	$(OUTDIR)/hashtab.o \
-	$(OUTDIR)/main.o \
-	$(OUTDIR)/mark.o \
-	$(OUTDIR)/memfile.o \
-	$(OUTDIR)/memline.o \
-	$(OUTDIR)/menu.o \
-	$(OUTDIR)/message.o \
-	$(OUTDIR)/misc1.o \
-	$(OUTDIR)/misc2.o \
-	$(OUTDIR)/move.o \
-	$(OUTDIR)/mbyte.o \
-	$(OUTDIR)/normal.o \
-	$(OUTDIR)/ops.o \
-	$(OUTDIR)/option.o \
-	$(OUTDIR)/os_win32.o \
-	$(OUTDIR)/os_mswin.o \
-	$(OUTDIR)/winclip.o \
-	$(OUTDIR)/pathdef.o \
-	$(OUTDIR)/popupmnu.o \
-	$(OUTDIR)/quickfix.o \
-	$(OUTDIR)/regexp.o \
-	$(OUTDIR)/screen.o \
-	$(OUTDIR)/search.o \
-	$(OUTDIR)/sha256.o \
-	$(OUTDIR)/spell.o \
-	$(OUTDIR)/syntax.o \
-	$(OUTDIR)/tag.o \
-	$(OUTDIR)/term.o \
-	$(OUTDIR)/ui.o \
-	$(OUTDIR)/undo.o \
-	$(OUTDIR)/version.o \
-	$(OUTDIR)/vimrc.o \
-	$(OUTDIR)/window.o
-
-ifdef PERL
-OBJ += $(OUTDIR)/if_perl.o
-endif
-ifdef LUA
-OBJ += $(OUTDIR)/if_lua.o
-endif
-ifdef MZSCHEME
-OBJ += $(OUTDIR)/if_mzsch.o
-MZSCHEME_INCL = if_mzsch.h
-ifeq (yes,$(MZSCHEME_GENERATE_BASE))
-CFLAGS += -DINCLUDE_MZSCHEME_BASE
-MZ_EXTRA_DEP += mzscheme_base.c
-endif
-ifeq (yes,$(MZSCHEME_PRECISE_GC))
-CFLAGS += -DMZ_PRECISE_GC
-endif
-endif
-ifdef PYTHON
-OBJ += $(OUTDIR)/if_python.o
-endif
-ifdef PYTHON3
-OBJ += $(OUTDIR)/if_python3.o
-endif
-ifdef RUBY
-OBJ += $(OUTDIR)/if_ruby.o
-endif
-ifdef TCL
-OBJ += $(OUTDIR)/if_tcl.o
-endif
-ifeq ($(CSCOPE),yes)
-OBJ += $(OUTDIR)/if_cscope.o
-endif
-ifeq ($(NETBEANS),yes)
-# Only allow NETBEANS for a GUI build.
-ifeq (yes, $(GUI))
-OBJ += $(OUTDIR)/netbeans.o
-LIB += -lwsock32
-endif
-endif
-ifeq ($(DIRECTX),yes)
-# Only allow DIRECTX for a GUI build.
-ifeq (yes, $(GUI))
-OBJ += $(OUTDIR)/gui_dwrite.o
-LIB += -ld2d1 -ldwrite
-USE_STDCPLUS = yes
-endif
-endif
-ifneq ($(XPM),no)
-# Only allow XPM for a GUI build.
-ifeq (yes, $(GUI))
-OBJ += $(OUTDIR)/xpm_w32.o
-# You'll need libXpm.a from http://gnuwin32.sf.net
-LIB += -L$(XPM)/lib -lXpm
-endif
-endif
-
-
-ifdef MZSCHEME
-MZSCHEME_SUFFIX = Z
-endif
-
-ifeq ($(GUI),yes)
-TARGET := gvim$(DEBUG_SUFFIX).exe
-DEFINES += $(DEF_GUI)
-OBJ += $(GUIOBJ)
-LFLAGS += -mwindows
-OUTDIR = gobj$(DEBUG_SUFFIX)$(MZSCHEME_SUFFIX)$(ARCH)
-else
-TARGET := vim$(DEBUG_SUFFIX).exe
-OUTDIR = obj$(DEBUG_SUFFIX)$(MZSCHEME_SUFFIX)$(ARCH)
-endif
-
-ifdef GETTEXT
-ifneq (yes, $(GETTEXT))
-CFLAGS += -I$(GETTEXTINCLUDE)
-ifndef STATIC_GETTEXT
-LIB += -L$(GETTEXTLIB) -l$(INTLLIB)
-ifeq (USE_SAFE_GETTEXT_DLL, $(DYNAMIC_GETTEXT))
-OBJ+=$(SAFE_GETTEXT_DLL_OBJ)
-endif
-else
-LIB += -L$(GETTEXTLIB) -lintl
-endif
-endif
-endif
-
-ifdef PERL
-ifeq (no, $(DYNAMIC_PERL))
-LIB += -L$(PERLLIBS) -lperl$(PERL_VER)
-endif
-endif
-
-ifdef TCL
-LIB += -L$(TCL)/lib
-ifeq (yes, $(DYNAMIC_TCL))
-LIB += -ltclstub$(TCL_VER)
-else
-LIB += -ltcl$(TCL_VER)
-endif
-endif
-
-ifeq (yes, $(OLE))
-LIB += -loleaut32
-OBJ += $(OUTDIR)/if_ole.o
-USE_STDCPLUS = yes
-endif
-
-ifeq (yes, $(MBYTE))
-DEFINES += -DFEAT_MBYTE
-endif
-
-ifeq (yes, $(IME))
-DEFINES += -DFEAT_MBYTE_IME
-ifeq (yes, $(DYNAMIC_IME))
-DEFINES += -DDYNAMIC_IME
-else
-LIB += -limm32
-endif
-endif
-
-ifdef ICONV
-ifneq (yes, $(ICONV))
-LIB += -L$(ICONV)
-CFLAGS += -I$(ICONV)
-endif
-DEFINES+=-DDYNAMIC_ICONV
-endif
-
-ifeq (yes, $(USE_STDCPLUS))
-ifeq (yes, $(STATIC_STDCPLUS))
-LIB += -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic
-else
-LIB += -lstdc++
-endif
-endif
-
-all: $(TARGET) vimrun.exe xxd/xxd.exe install.exe uninstal.exe GvimExt/gvimext.dll
-
-vimrun.exe: vimrun.c
-	$(CC) $(CFLAGS) -o vimrun.exe vimrun.c $(LIB)
-
-install.exe: dosinst.c
-	$(CC) $(CFLAGS) -o install.exe dosinst.c $(LIB) -lole32 -luuid
-
-uninstal.exe: uninstal.c
-	$(CC) $(CFLAGS) -o uninstal.exe uninstal.c $(LIB)
-
-$(TARGET): $(OUTDIR) $(OBJ)
-	$(CC) $(CFLAGS) $(LFLAGS) -o $@ $(OBJ) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)
-
-upx: exes
-	upx gvim.exe
-	upx vim.exe
-
-mpress: exes
-	mpress gvim.exe
-	mpress vim.exe
-
-xxd/xxd.exe: xxd/xxd.c
-	$(MAKE) -C xxd -f Make_ming.mak CC=$(CC)
-
-GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
-	$(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE)
-
-clean:
-	-$(DEL) $(OUTDIR)$(DIRSLASH)*.o
-	-$(DEL) $(OUTDIR)$(DIRSLASH)*.res
-	-rmdir $(OUTDIR)
-	-$(DEL) *.exe
-	-$(DEL) pathdef.c
-ifdef PERL
-	-$(DEL) if_perl.c
-endif
-ifdef MZSCHEME
-	-$(DEL) mzscheme_base.c
-endif
-	$(MAKE) -C GvimExt -f Make_ming.mak clean
-	$(MAKE) -C xxd -f Make_ming.mak clean
-
-###########################################################################
-INCL = vim.h feature.h os_win32.h os_dos.h ascii.h keymap.h term.h macros.h \
-	structs.h regexp.h option.h ex_cmds.h proto.h globals.h farsi.h \
-	gui.h
-
-$(OUTDIR)/if_python.o : if_python.c if_py_both.h $(INCL)
-	$(CC) -c $(CFLAGS) $(PYTHONINC) -DDYNAMIC_PYTHON_DLL=\"python$(PYTHON_VER).dll\" $< -o $@
-
-$(OUTDIR)/if_python3.o : if_python3.c if_py_both.h $(INCL)
-	$(CC) -c $(CFLAGS) $(PYTHON3INC) -DDYNAMIC_PYTHON3_DLL=\"PYTHON$(PYTHON3_VER).dll\" $< -o $@
-
-$(OUTDIR)/%.o : %.c $(INCL)
-	$(CC) -c $(CFLAGS) $< -o $@
-
-$(OUTDIR)/vimrc.o: vim.rc version.h gui_w32_rc.h
-	$(WINDRES) $(WINDRES_FLAGS) $(DEFINES) \
-	    --input-format=rc --output-format=coff -i vim.rc -o $@
-
-$(OUTDIR):
-	$(MKDIR) $(OUTDIR)
-
-$(OUTDIR)/ex_docmd.o:	ex_docmd.c $(INCL) ex_cmds.h
-	$(CC) -c $(CFLAGS) ex_docmd.c -o $(OUTDIR)/ex_docmd.o
-
-$(OUTDIR)/ex_eval.o:	ex_eval.c $(INCL) ex_cmds.h
-	$(CC) -c $(CFLAGS) ex_eval.c -o $(OUTDIR)/ex_eval.o
-
-$(OUTDIR)/gui_w32.o:	gui_w32.c gui_w48.c $(INCL)
-	$(CC) -c $(CFLAGS) gui_w32.c -o $(OUTDIR)/gui_w32.o
-
-$(OUTDIR)/gui_dwrite.o:	gui_dwrite.cpp $(INCL) gui_dwrite.h
-	$(CC) -c $(CFLAGS) gui_dwrite.cpp -o $(OUTDIR)/gui_dwrite.o
-
-$(OUTDIR)/if_cscope.o:	if_cscope.c $(INCL) if_cscope.h
-	$(CC) -c $(CFLAGS) if_cscope.c -o $(OUTDIR)/if_cscope.o
-
-# Remove -D__IID_DEFINED__ for newer versions of the w32api
-$(OUTDIR)/if_ole.o: if_ole.cpp $(INCL)
-	$(CC) $(CFLAGS) -c -o $(OUTDIR)/if_ole.o if_ole.cpp
-
-$(OUTDIR)/if_ruby.o: if_ruby.c $(INCL)
-ifeq (16, $(RUBY))
-	$(CC) $(CFLAGS) -U_WIN32 -c -o $(OUTDIR)/if_ruby.o if_ruby.c
-endif
-
-if_perl.c: if_perl.xs typemap
-	$(XSUBPP) -prototypes -typemap \
-	     $(PERLLIB)/ExtUtils/typemap if_perl.xs > $@
-
-$(OUTDIR)/netbeans.o:	netbeans.c $(INCL) $(NBDEBUG_INCL) $(NBDEBUG_SRC)
-	$(CC) -c $(CFLAGS) netbeans.c -o $(OUTDIR)/netbeans.o
-
-$(OUTDIR)/regexp.o:		regexp.c regexp_nfa.c $(INCL)
-	$(CC) -c $(CFLAGS) regexp.c -o $(OUTDIR)/regexp.o
-
-$(OUTDIR)/if_mzsch.o:	if_mzsch.c $(INCL) if_mzsch.h $(MZ_EXTRA_DEP)
-	$(CC) -c $(CFLAGS) if_mzsch.c -o $(OUTDIR)/if_mzsch.o
 
-mzscheme_base.c:
-	$(MZSCHEME)/mzc --c-mods mzscheme_base.c ++lib scheme/base
 
-pathdef.c: $(INCL)
-ifneq (sh.exe, $(SHELL))
-	@echo creating pathdef.c
-	@echo '/* pathdef.c */' > pathdef.c
-	@echo '#include "vim.h"' >> pathdef.c
-	@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' >> pathdef.c
-	@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' >> pathdef.c
-	@echo 'char_u *all_cflags = (char_u *)"$(CC) $(CFLAGS)";' >> pathdef.c
-	@echo 'char_u *all_lflags = (char_u *)"$(CC) $(CFLAGS) $(LFLAGS) -o $(TARGET) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)";' >> pathdef.c
-	@echo 'char_u *compiled_user = (char_u *)"$(USERNAME)";' >> pathdef.c
-	@echo 'char_u *compiled_sys = (char_u *)"$(USERDOMAIN)";' >> pathdef.c
-else
-	@echo creating pathdef.c
-	@echo /* pathdef.c */ > pathdef.c
-	@echo #include "vim.h" >> pathdef.c
-	@echo char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)"; >> pathdef.c
-	@echo char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)"; >> pathdef.c
-	@echo char_u *all_cflags = (char_u *)"$(CC) $(CFLAGS)"; >> pathdef.c
-	@echo char_u *all_lflags = (char_u *)"$(CC) $(CFLAGS) $(LFLAGS) -o $(TARGET) $(LIB) -lole32 -luuid $(LUA_LIB) $(MZSCHEME_LIBDIR) $(MZSCHEME_LIB) $(PYTHONLIB) $(PYTHON3LIB) $(RUBYLIB)"; >> pathdef.c
-	@echo char_u *compiled_user = (char_u *)"$(USERNAME)"; >> pathdef.c
-	@echo char_u *compiled_sys = (char_u *)"$(USERDOMAIN)"; >> pathdef.c
-endif
+# Do not change this.
+UNDER_CYGWIN = no
+include Make_cyg_ming.mak