updated for version 7.0230v7.0230

5 files changed, 388 insertions, 46 deletions

diff --git a/runtime/doc/quickfix.txt b/runtime/doc/quickfix.txt
index 50395fc48..4814a09d6 100644
--- a/runtime/doc/quickfix.txt
+++ b/runtime/doc/quickfix.txt
@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 7.0aa.  Last change: 2006 Mar 19
+*quickfix.txt*  For Vim version 7.0aa.  Last change: 2006 Mar 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -878,6 +878,7 @@ prefixes are:
 	%W		start of a multi-line warning message
 	%I		start of a multi-line informational message
 	%A		start of a multi-line message (unspecified type)
+	%>		for next line start with current pattern again |efm-%>|
 	%C		continuation of a multi-line message
 	%Z		end of a multi-line message
 These can be used with '+' and '-', see |efm-ignore| below.
@@ -929,6 +930,17 @@ starting with a space, followed by any characters to the end of the line,
 it also hides line 7 which would trigger a separate error message otherwise.
 Error format strings are always parsed pattern by pattern until the first
 match occurs.
+							*efm-%>*
+The %> item can be used to avoid trying patterns that appear earlier in
+'errorformat'.  This is useful for patterns that match just about anything.
+For example, if the error looks like this:
+
+	Error in line 123 of foo.c: ~
+	unknown variable "i" ~
+
+This can be found with: >
+	:set efm=xxx,%E%>Error in line %l of %f:,%Z%m
+Where "xxx" has a pattern that would also match the second line.
 
 Important: There is no memory of what part of the errorformat matched before;
 every line in the error file gets a complete new run through the error format
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 6d2c86007..a7e1bb150 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.0aa.  Last change: 2006 Mar 19
+*todo.txt*      For Vim version 7.0aa.  Last change: 2006 Mar 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -30,15 +30,23 @@ be worked on, but only if you sponsor Vim development.  See |sponsor|.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-'errorformat': Add a flag %? to check for a match with the next item first.
-Helps for continuation lines that may contain just about anything, e.g. an
-error message.
-    error 99 in file foo.c line 1234:
-	something is wrong here
+Links in docs to vimball docs.
 
-Gnome GUI: lots of error messages during startup.  These go away when not
-using the notebook for tab labels.  Still similar error messages when moving
-the toolbar to another location.
+HTML indenting can be slow, find out why.
+Add a function to get the current time in usec.  reltime([start, [end]])
+    reltime().sec == seconds, reltime().usec = microseconds
+    reltime(start) current time relative to [start]
+	echo timestring(reltime(start), 3)  (3 is nr of digits after dot)
+    reltime(start, end) difference between start and end
+
+Include GetLatestVimScripts script?
+
+Adjust src/main.aap for installing manpages like in Makefile.
+    And for generating Vim.app for the Mac.
+    Install spell files with src/main.aap.
+
+Gnome2: When moving the toolbar out of the dock, so that it becomes floating,
+it can no longer be moved.
 
 Win32: Describe how to do debugging. (George Reilly)
 
@@ -51,28 +59,8 @@ Mac unicode patch (Da Woon Jung, Eckehard Berns):
 - With 'nopaste' pasting is wrong, with 'paste' Command-V doesn't work.
   (Alan Schmitt)
 
-EMBEDDING: Make it possible to run Vim inside a window of another program.
-For GTK Neil Bird has a patch to use Vim like a widget.
-
-Ctags still hasn't included the patch.  Darren is looking for someone to do
-maintenance.  Is there another solution?
-
-HTML indenting can be slow, find out why.
-Add a function to get the current time in usec.  reltime([start, [end]])
-    reltime().sec == seconds, reltime().usec = microseconds
-    reltime(start) current time relative to [start]
-	echo timestring(reltime(start), 3)  (3 is nr of digits after dot)
-    reltime(start, end) difference between start and end
-Profiling:
-    - :profile pause
-    - :profile resume
-
-Adjust src/main.aap for installing manpages like in Makefile.
-    And for generating Vim.app for the Mac.
-    Install spell files with src/main.aap.
-
-Add ":smap", Select mode mapping?  Otherwise: ":sunmap", so that Visual mode
-mappings for normal keys can be removed from Select mode.
+Darren is including the patch in ctags.  Test it when it's ready.  Change
+"typename" to "typeref" in C complete code.
 
 Add more tests for all new functionality in Vim 7.  Especially new functions.
 
@@ -81,7 +69,6 @@ text of a previous change.
 
 
 Awaiting updated patches:
-7   Updated Ruby interface. (Ryan Paul)
 8   Add ":n" to fnamemodify(): normalize path, remove "../" when possible.
     Aric Blumer has a patch for this.
     He will update the patch for 6.3.
@@ -1446,7 +1433,6 @@ Syntax highlighting:
 7   CTRL-] checks the highlight group for finding out what the tag is.
 7   Add an explanation how a list of words can be used to highlight misspelled
     words.
-7   Command line completion for ":find" should search in 'path'.
 8   Add more command line completion for :syntax.
 8   Add more command line completion for :highlight.
 8   Add more command line completion for :sign.
diff --git a/runtime/doc/version7.txt b/runtime/doc/version7.txt
index a7d39a002..694e5f117 100644
--- a/runtime/doc/version7.txt
+++ b/runtime/doc/version7.txt
@@ -1,4 +1,4 @@
-*version7.txt*  For Vim version 7.0aa.  Last change: 2006 Mar 18
+*version7.txt*  For Vim version 7.0aa.  Last change: 2006 Mar 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -36,6 +36,7 @@ Debugger support			|new-debug-support|
 Remote file explorer			|new-netrw-explore|
 Define an operator			|new-define-operator|
 Mapping to an expression		|new-map-expression|
+Visual and Select mode mappings		|new-map-select|
 Location list				|new-location-list|
 Various new items			|new-items-7|
 
@@ -143,6 +144,10 @@ difficult to locate errors.  Now the line number in the sourced file is
 reported, relative to the function start.  This also means that line numbers
 for ":breakadd func" are different.
 
+When defining a user command with |:command| the special items could be
+abbreviated.  This caused unexpected behavior, such as <li> being recognized
+as <line1>.  The items can no longer be abbreviated.
+
 ==============================================================================
 NEW FEATURES						*new-7*
 
@@ -161,8 +166,8 @@ The |string()| function can be used to get a string representation of a
 variable.  Works for Numbers, Strings and composites of them.  Then |eval()|
 can be used to turn the string back into the variable value.
 
-The |:let| command can now use ":let var += expr" like using ":let var = var +
-expr".  "-=" and ".=" works in a similar way.
+The |:let| command can now use "+=".  ":let var += expr" works like
+":let var = var + expr".  "-=" and ".=" works in a similar way.
 
 With the |:profile| command you can find out where your function or script
 wastes its time.
@@ -493,6 +498,20 @@ Here the dot will be mapped to whatever InsertDot() returns.
 Also works for abbreviations.  See |:map-<expr>| for the details.
 
 
+Visual and Select mode mappings				*new-map-select*
+-------------------------------
+
+Previously Visual mode mappings applied both to Visual and Select mode.  With
+a trick to have the mappings work in Select mode like they would in Visual
+mode.
+
+Commands have been added to define mappings for Visual and Select mode
+separately: |:xmap| and |:smap|.  With the associated "noremap" and "unmap"
+commands.
+
+The same is done for menus: |:xmenu|, |:smenu|, etc.
+
+
 Location list						*new-location-list*
 -------------
 
@@ -1103,6 +1122,13 @@ getwinvar() now also works to obtain a buffer-local option from the specified
 window.
 
 Added the "%s" item to 'errorformat'. (Yegappan Lakshmanan)
+Added the "%>" item to 'errorformat'.
+
+For 'errorformat' it was not possible to have a file name that contains the
+character that follows after "%f".  For example, in "%f:%l:%m" the file name
+could not contain ":".  Now include the first ":" where the rest of the
+pattern matches.  In the example a ":" not followed by a line number is
+included in the file name. (suggested by Emanuele Giaquinta)
 
 GTK GUI: use the GTK file dialog when it's available.  Mix from patches by
 Grahame Bowland and Evan Webb.
@@ -1133,12 +1159,6 @@ Lakshmanan)
 Win32: Balloons can have multiple lines if common controls supports it.
 (Sergey Khorev)
 
-For 'errorformat' it was not possible to have a file name that contains the
-character that follows after "%f".  For example, in "%f:%l:%m" the file name
-could not contain ":".  Now include the first ":" where the rest of the
-pattern matches.  In the example a ":" not followed by a line number is
-included in the file name. (suggested by Emanuele Giaquinta)
-
 For command-line completion the matches for various types of arguments are now
 sorted: user commands, variables, syntax names, etc.
 
@@ -1233,6 +1253,8 @@ Win32: In the batch files generated by the install program, use $VIMRUNTIME or
 $VIM if it's set.  Example provided by Mathias Michaelis.
 Also create a vimtutor.bat batch file.
 
+The 'balloonexpr' option is now |global-local|.
+
 ==============================================================================
 COMPILE TIME CHANGES					*compile-changes-7*
 
@@ -1384,9 +1406,6 @@ just before it is invoked
 VMS: Occasionally CR characters were inserted in the file.  Expansion of
 environment variables was not correct. (Zoltan Arpadffy)
 
-VMS: Improved low level char input (affects just console mode). (Zoltan
-Arpadffy)
-
 UTF-8: When 'delcombine' is set "dw" only deleted the last combining character
 from the first character of the word.
 
@@ -1733,6 +1752,9 @@ change the window size ourselves, but they may come at an unexpected moment.
 Peek for a character to get any window resize events and fix 'columns' and
 'lines' to undo this.
 
+When using the GTK plug mechanism, resizing and focus was not working
+properly. (Neil Bird)
+
 After deleting files from the argument list a session file generated with
 ":mksession" may contain invalid ":next" commands.
 
diff --git a/runtime/doc/vimball.txt b/runtime/doc/vimball.txt
new file mode 100644
index 000000000..cd5f32f4d
--- /dev/null
+++ b/runtime/doc/vimball.txt
@@ -0,0 +1,66 @@
+*vimball.txt*	Vimball Archiver				Mar 20, 2006
+Author:  Charles E. Campbell, Jr.  <NdrOchip@ScampbellPfamily.AbizM>
+	  (remove NOSPAM from Campbell's email first)
+Copyright: (c) 2004-2006 by Charles E. Campbell, Jr.	*Vimball-copyright*
+           The VIM LICENSE applies to Vimball.vim, and Vimball.txt
+           (see |copyright|) except use "Vimball" instead of "Vim".
+	   No warranty, express or implied.
+	   Use At-Your-Own-Risk!
+
+==============================================================================
+1. Contents					*vimball* *vimball-contents*
+
+	1. Contents......................................: |vimball-contents|
+	2. Vimball Manual................................: |vimball-manual|
+	3. Vimball History...............................: |vimball-history|
+
+
+==============================================================================
+2. Vimball Manual					*vimball-manual*
+
+							*:MkVimball*
+		:[range]MkVimball[!] filename
+
+	This command takes lines holding a path to files to be included in
+	your vimball; as an example: >
+		plugin/something.vim
+		doc/something.txt
+<	using MkVimball on this range will create a file called
+	"filename.vba" which can be used by Vimball.vim to re-create these
+	files.  If the "filename.vba" file already exists, then MkVimball
+	will issue a warning and not create the file.
+
+	However, if you use the exclamation point (!), then MkVimball will
+	create the "filename.vba" file, overwriting it if it already exists.
+	This behavior resembles that for |:w|.
+
+							*vimball-extract*
+		vim filename.vba
+
+	Simply editing a Vimball will cause Vimball.vim to tell the user to
+	source the file to extract its contents.
+
+	Extraction will only proceed if the first line of a putative vimball
+	file holds the "Vimball Archiver by Charles E.  Campbell, Jr., Ph.D."
+	line.
+
+		:VimballList				*vimball-vimballlist*
+	
+	This command will tell Vimball to list the files in the archive, along
+	with their lengths in lines.
+
+
+==============================================================================
+3. Vimball History					*vimball-history*
+
+	3  : Mar 20, 2006 * removed query, now requires sourcing to be
+	                    extracted (:so %).  Message to that effect
+			    included.
+			  * :VimballList  now shows files that would be
+			    extracted.
+	2  : Mar 20, 2006 * query, :UseVimball included
+	1  : Mar 20, 2006 * initial release
+
+
+==============================================================================
+vim:tw=78:ts=8:ft=help:fdm=marker
diff --git a/runtime/plugin/vimball.vim b/runtime/plugin/vimball.vim
new file mode 100644
index 000000000..89d2ee182
--- /dev/null
+++ b/runtime/plugin/vimball.vim
@@ -0,0 +1,256 @@
+" vimball : construct a file containing both paths and files
+" Author: Charles E. Campbell, Jr.
+" Date:   Mar 20, 2006
+" Version: 3
+" GetLatestVimScripts: 1502 1 :AutoInstall: vimball.vim
+" Copyright: (c) 2004-2006 by Charles E. Campbell, Jr.
+"            The VIM LICENSE applies to Vimball.vim, and Vimball.txt
+"            (see |copyright|) except use "Vimball" instead of "Vim".
+"            No warranty, express or implied.
+"  *** ***   Use At-Your-Own-Risk!   *** ***
+
+" ---------------------------------------------------------------------
+"  Load Once: {{{1
+if &cp || exists("g:loaded_vimball")
+ finish
+endif
+
+let s:keepcpo        = &cpo
+let g:loaded_vimball = "v3"
+set cpo&vim
+
+" ------------------------------------------------------------------------------
+" Public Interface: {{{1
+com! -ra -na=+ -bang MkVimball call s:MkVimball(<line1>,<line2>,<bang>0,<f-args>)
+com! -na=0 UseVimball  call s:Vimball(1)
+com! -na=0 VimballList call s:Vimball(0)
+au BufReadPost *.vba echohl WarningMsg | echo "Source this file to extract it! (:so %)" | echohl None
+
+" =====================================================================
+"  Functions: {{{1
+
+" ---------------------------------------------------------------------
+" MkVimball: creates a vimball given a list of paths to files {{{2
+" Vimball Format:
+"     path
+"     filesize
+"     [file]
+"     path
+"     filesize
+"     [file]
+fun! s:MkVimball(line1,line2,writelevel,vimballname) range
+"  call Dfunc("MkVimball(line1=".a:line1." line2=".a:line2." writelevel=".a:writelevel." vimballname<".a:vimballname.">")
+  let vbname= substitute(a:vimballname,'\.[^.]*$','','e').'.vba'
+  if !a:writelevel && filereadable(vbname)
+   echohl Error | echoerr "(MkVimball) file<".vbname."> exists; use ! to insist" | echohl None
+"   call Dret("MkVimball : file<".vbname."> already exists; use ! to insist")
+   return
+  endif
+
+  " user option bypass
+  let eikeep= &ei
+  set ei=all
+
+  let home   = substitute(&rtp,',.*$','','')
+  let curdir = getcwd()
+  exe "cd ".home
+
+  " record current tab, initialize while loop index
+  let curtabnr = tabpagenr()
+  let linenr   = a:line1
+"  call Decho("curtabnr=".curtabnr)
+
+  while linenr <= a:line2
+   let svfile  = getline(linenr)
+"   call Decho("svfile<".svfile.">")
+ 
+   if !filereadable(svfile)
+    echohl Error | echo "unable to read file<".svfile.">" | echohl None
+    let &ei= eikeep
+    exe "cd ".curdir
+"    call Dret("MkVimball")
+    return
+   endif
+ 
+   " create/switch to mkvimball tab
+   if !exists("vbtabnr")
+    tabnew
+    silent! file Vimball
+    let vbtabnr= tabpagenr()
+   else
+    exe "tabn ".vbtabnr
+   endif
+ 
+   let lastline= line("$") + 1
+   if lastline == 2 && getline("$") == ""
+	call setline(1,'" Vimball Archiver by Charles E. Campbell, Jr., Ph.D.')
+	call setline(2,'UseVimball')
+	call setline(3,'finish')
+	let lastline= 4
+   endif
+   call setline(lastline  ,svfile)
+   call setline(lastline+1,0)
+   exe "$r ".svfile
+   call setline(lastline+1,line("$") - lastline - 1)
+"   call Decho("lastline=".lastline." line$=".line("$"))
+
+  " restore to normal tab
+   exe "tabn ".curtabnr
+   let linenr= linenr + 1
+  endwhile
+
+  " write the vimball
+  exe "tabn ".vbtabnr
+  exe "cd ".curdir
+  if a:really
+   if a:writelevel
+    exe "w! ".vbname
+   else
+    exe "w ".vbname
+   endif
+  endif
+"  call Decho("Vimball<".vbname."> created")
+  echo "Vimball<".vbname."> created"
+
+  " remove the evidence
+  setlocal nomod bh=wipe
+  exe "tabn ".curtabnr
+  exe "tabc ".vbtabnr
+
+  " restore options
+  let &ei= eikeep
+
+"  call Dret("MkVimball")
+endfun
+
+" ---------------------------------------------------------------------
+" Vimball: {{{2
+fun! s:Vimball(really)
+"  call Dfunc("Vimball(really=".a:really.")")
+
+  if getline(1) !~ '^" Vimball Archiver by Charles E. Campbell, Jr., Ph.D.$'
+   echoerr "(Vimball) The current file does not appear to be a Vimball!"
+"   call Dret("Vimball")
+   return
+  endif
+
+  " initialize
+  let regakeep = @a
+  let eikeep   = &ei
+  let vekeep   = &ve
+  let makeep   = getpos("'a")
+  let curtabnr = tabpagenr()
+  set ei=all ve=all
+
+  " set up vimball tab
+  tabnew
+  silent! file Vimball
+  let vbtabnr= tabpagenr()
+  let didhelp= ""
+
+  " go to vim plugin home
+  let home   = substitute(&rtp,',.*$','','')
+  let curdir = getcwd()
+"  call Decho("exe cd ".home)
+  exe "cd ".home
+  let linenr  = 4
+  let filecnt = 0
+
+  " give title to listing of (extracted) files from Vimball Archive
+  if a:really
+   echohl Title | echomsg "Vimball Archive" | echohl None
+  else
+   echohl Title | echomsg "Vimball Archive Listing" | echohl None
+  endif
+
+  " apportion vimball contents to various files
+"  call Decho("exe tabn ".curtabnr)
+  exe "tabn ".curtabnr
+"  call Decho("linenr=".linenr." line$=".line("$"))
+  while 1 < linenr && linenr < line("$")
+   let fname   = getline(linenr)
+   let fsize   = getline(linenr+1)
+   let filecnt = filecnt + 1
+   if a:really
+    echomsg "extracted <".fname.">: ".fsize." lines"
+   else
+    echomsg "would extract <".fname.">: ".fsize." lines"
+   endif
+"   call Decho(linenr.": will extract file<".fname.">")
+"   call Decho((linenr+1).": fsize=".fsize)
+
+   " make directories if they don't exist yet
+   let fnamebuf= fname
+   while fnamebuf =~ '/'
+   	let dirname  = substitute(fnamebuf,'/.*$','','e')
+   	let fnamebuf = substitute(fnamebuf,'^.\{-}/\(.*\)$','\1','e')
+	if !isdirectory(dirname)
+"	 call Decho("making <".dirname.">")
+	 call mkdir(dirname)
+	endif
+	exe "cd ".dirname
+   endwhile
+   exe "cd ".home
+
+   " grab specified qty of lines and place into "a" buffer
+   exe linenr
+   norm! jjma
+   exe (linenr + fsize + 1)
+   silent norm! "ay'a
+"   call Decho("yanked ".fsize." lines into register-a")
+
+"   call Decho("didhelp<".didhelp."> fname<".fname.">")
+   if didhelp == "" && fname =~ 'doc/[^/]\+\.txt$'
+   	let didhelp= substitute(fname,'^\(.*\<doc\)[/\\][^.]*\.txt$','\1','e')
+"	call Decho("didhelp<".didhelp.">")
+   endif
+
+   " copy "a" buffer into tab
+"   call Decho('copy "a buffer into tab#'.vbtabnr)
+   exe "tabn ".vbtabnr
+   silent! %d
+   silent norm! "aPGdd1G
+"   call Decho("rega<".@a.">")
+
+   " write tab to file
+"   call Decho("exe w! ".fname)
+   exe "silent w! ".fname
+
+"   call Decho("exe tabn ".curtabnr)
+   exe "tabn ".curtabnr
+"   let oldlinenr = linenr " Decho
+   let linenr    = linenr + fsize + 2
+"   call Decho("update linenr= [linenr=".oldlinenr."] + [fsize=".fsize."] + 2 = ".linenr)
+  endwhile
+
+  " set up help
+"  call Decho("about to set up help: didhelp<".didhelp.">")
+  if didhelp != ""
+"   call Decho("exe helptags ".home."/".didhelp)
+   exe "helptags ".home."/".didhelp
+   echomsg "did helptags"
+  endif
+
+  " make sure a "Press ENTER..." prompt appears to keep the messages showing!
+  while filecnt < &ch
+   echomsg " "
+   let filecnt= filecnt + 1
+  endwhile
+
+  " restore events, delete tab and buffer
+  exe "tabn ".vbtabnr
+  setlocal nomod bh=wipe
+  exe "tabn ".curtabnr
+  exe "tabc ".vbtabnr
+  let &ei= eikeep
+  let @a = regakeep
+  if makeep[0] != 0
+   " restore mark a
+"   call Decho("restore mark-a: makeep=".string(makeep))
+   call setpos("'a",makeep)
+   ka
+  endif
+  exe "cd ".curdir
+
+"  call Dret("Vimball")
+endfun