updated for version 7.0158v7.0158

21 files changed, 649 insertions, 300 deletions

diff --git a/runtime/doc/autocmd.txt b/runtime/doc/autocmd.txt
index e2ca67a48..390afadd4 100644
--- a/runtime/doc/autocmd.txt
+++ b/runtime/doc/autocmd.txt
@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 10
+*autocmd.txt*   For Vim version 7.0aa.  Last change: 2005 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -812,6 +812,10 @@ option will not cause any commands to be executed.
 			autocommands for that group.  Note: if you use an
 			undefined group name, Vim gives you an error message.
 
+			After applying the autocommands the modelines are
+			processed, so that their overrule the settings from
+			autocommands, like what happens when editing a file.
+
 						*:doautoa* *:doautoall*
 :doautoa[ll] [group] {event} [fname]
 			Like ":doautocmd", but apply the autocommands to each
diff --git a/runtime/doc/cmdline.txt b/runtime/doc/cmdline.txt
index 1ea512e60..ec354ec9d 100644
--- a/runtime/doc/cmdline.txt
+++ b/runtime/doc/cmdline.txt
@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.0aa.  Last change: 2005 Sep 17
+*cmdline.txt*   For Vim version 7.0aa.  Last change: 2005 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -562,7 +562,7 @@ argument for the command, which has a different meaning.  For example:
 			"name"
 
 ==============================================================================
-4. Ex command-line ranges	*cmdline-ranges* *[range]* *E16* *E493*
+4. Ex command-line ranges	*cmdline-ranges* *[range]* *E16*
 
 Some Ex commands accept a line range in front of them.  This is noted as
 [range].  It consists of one or more line specifiers, separated with ',' or
@@ -648,11 +648,15 @@ When folds are active the line numbers are rounded off to include the whole
 closed fold.  See |fold-behavior|.
 
 
-Reverse Range
+Reverse Range						*E493*
 
 A range should have the lower line number first.  If this is not the case, Vim
-will ask you if it should swap the line numbers.  This is not done within the
-global command ":g".
+will ask you if it should swap the line numbers. 
+	Backwards range given, OK to swap ~
+This is not done within the global command ":g".
+
+You can use ":silent" before a command to avoid the question, the range will
+always be swapped then.
 
 
 Count and Range						*N:*
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index cb7ed6eb5..adcf45187 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*      For Vim version 7.0aa.  Last change: 2005 Oct 12
+*eval.txt*      For Vim version 7.0aa.  Last change: 2005 Nov 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -5050,6 +5050,9 @@ This also works when reading a variable that has not been set yet: >
 
 	:let l = foo#bar#lvar
 
+However, when the autoload script was already loaded it won't be loaded again
+for an unknown variable.
+
 When assigning a value to such a variable nothing special happens.  This can
 be used to pass settings to the autoload script before it's loaded: >
 
diff --git a/runtime/doc/if_perl.txt b/runtime/doc/if_perl.txt
index ef0763d04..6e0a3e414 100644
--- a/runtime/doc/if_perl.txt
+++ b/runtime/doc/if_perl.txt
@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
+*if_perl.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege
@@ -9,6 +9,7 @@ Perl and Vim				*perl* *Perl*
 1. Editing Perl files			|perl-editing|
 2. Compiling VIM with Perl interface	|perl-compiling|
 3. Using the Perl interface		|perl-using|
+4. Dynamic loading			|perl-dynamic|
 
 {Vi does not have any of these commands}
 
@@ -259,4 +260,22 @@ function: >
     endif
 Note that "EOF" must be at the start of the line.
 
+==============================================================================
+4. Dynamic loading					*perl-dynamic*
+
+On MS-Windows the Perl library can be loaded dynamically.  The |:version|
+output then includes |+perl/dyn|.
+
+This means that Vim will search for the Perl DLL file only when needed.  When
+you don't use the Perl interface you don't need it, thus you can use Vim
+without this DLL file.
+
+To use the Perl interface the Perl DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Perl version Vim was compiled with.
+Currently the name is "perl58.dll".  That is for Perl 5.8.  To know for
+sure edit "gvim.exe" and search for "perl\d*.dll\c".
+
+==============================================================================
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/if_pyth.txt b/runtime/doc/if_pyth.txt
index 1a2a33de5..3ceeff88e 100644
--- a/runtime/doc/if_pyth.txt
+++ b/runtime/doc/if_pyth.txt
@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
+*if_pyth.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -11,6 +11,7 @@ The Python Interface to Vim				*python* *Python*
 3. Buffer objects		|python-buffer|
 4. Range objects		|python-range|
 5. Window objects		|python-window|
+6. Dynamic loading		|python-dynamic|
 
 {Vi does not have any of these commands}
 
@@ -300,4 +301,21 @@ The height attribute is writable only if the screen is split horizontally.
 The width attribute is writable only if the screen is split vertically.
 
 ==============================================================================
+6. Dynamic loading					*python-dynamic*
+
+On MS-Windows the Python library can be loaded dynamically.  The |:version|
+output then includes |+python/dyn|.
+
+This means that Vim will search for the Python DLL file only when needed.
+When you don't use the Python interface you don't need it, thus you can use
+Vim without this DLL file.
+
+To use the Python interface the Python DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Python version Vim was compiled with.
+Currently the name is "python24.dll".  That is for Python 2.4.  To know for
+sure edit "gvim.exe" and search for "python\d*.dll\c".
+
+==============================================================================
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/if_ruby.txt b/runtime/doc/if_ruby.txt
index 1efb6ce78..a70d32a7b 100644
--- a/runtime/doc/if_ruby.txt
+++ b/runtime/doc/if_ruby.txt
@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.0aa.  Last change: 2005 Aug 31
+*if_ruby.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda
@@ -11,6 +11,7 @@ The Ruby Interface to Vim				*ruby* *Ruby*
 3. VIM::Buffer objects		|ruby-buffer|
 4. VIM::Window objects		|ruby-window|
 5. Global variables		|ruby-globals|
+6. Dynamic loading		|ruby-dynamic|
 
 {Vi does not have any of these commands}
 			*E266* *E267* *E268* *E269* *E270* *E271* *E272* *E273*
@@ -166,7 +167,7 @@ cursor = [{row}, {col}]
 		Sets the cursor position to {row} and {col}.
 
 ==============================================================================
-4. Global variables					*ruby-globals*
+5. Global variables					*ruby-globals*
 
 There are two global variables.
 
@@ -174,4 +175,21 @@ $curwin		The current window object.
 $curbuf		The current buffer object.
 
 ==============================================================================
+6. Dynamic loading					*ruby-dynamic*
+
+On MS-Windows the Ruby library can be loaded dynamically.  The |:version|
+output then includes |+ruby/dyn|.
+
+This means that Vim will search for the Ruby DLL file only when needed.  When
+you don't use the Ruby interface you don't need it, thus you can use Vim
+without this DLL file.
+
+To use the Ruby interface the Ruby DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Ruby version Vim was compiled with.
+Currently the name is "ruby18.dll".  That is for Ruby 1.8.  To know for sure
+edit "gvim.exe" and search for "ruby\d*.dll\c".
+
+==============================================================================
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/if_tcl.txt b/runtime/doc/if_tcl.txt
index 1195ed5ac..79c43f5cb 100644
--- a/runtime/doc/if_tcl.txt
+++ b/runtime/doc/if_tcl.txt
@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.0aa.  Last change: 2005 Mar 29
+*if_tcl.txt*    For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken
@@ -14,6 +14,7 @@ The Tcl Interface to Vim				*tcl* *Tcl* *TCL*
 6. Miscellaneous; Output from Tcl	|tcl-misc| |tcl-output|
 7. Known bugs & problems		|tcl-bugs|
 8. Examples				|tcl-examples|
+9. Dynamic loading			|tcl-dynamic|
 
 {Vi does not have any of these commands} *E280* *E281*
 
@@ -509,4 +510,21 @@ startup file (usually "~/.vimrc" on Unix):
 	endif
 
 ==============================================================================
+9. Dynamic loading					*tcl-dynamic*
+
+On MS-Windows the Tcl library can be loaded dynamically.  The |:version|
+output then includes |+tcl/dyn|.
+
+This means that Vim will search for the Tcl DLL file only when needed.  When
+you don't use the Tcl interface you don't need it, thus you can use Vim
+without this DLL file.
+
+To use the Tcl interface the Tcl DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Tcl version Vim was compiled with.
+Currently the name is "tcl83.dll".  That is for Tcl 8.3.  To know for sure
+edit "gvim.exe" and search for "tcl\d*.dll\c".
+
+==============================================================================
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/insert.txt b/runtime/doc/insert.txt
index 4b6d0eb6f..9d8e4e609 100644
--- a/runtime/doc/insert.txt
+++ b/runtime/doc/insert.txt
@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.0aa.  Last change: 2005 Oct 02
+*insert.txt*    For Vim version 7.0aa.  Last change: 2005 Nov 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -975,6 +975,7 @@ PmenuThumb	thumb of the scrollbar  |hl-PmenuThumb|
 
 Filetype-specific remarks for omni completion	    *compl-omni-filetypes*
 
+
 C							*ft-c-omni*
 
 Completion of C code requires a tags file.  You should use Exuberant ctags,
@@ -1007,7 +1008,14 @@ When the same structure name appears in multiple places all possible members
 are included.
 
 
+CSS                                                     *ft-css-omni*
+
+Complete properties and their appropriate values according to CSS 2.1
+specification. 
+
+
 (X)HTML                          			*ft-html-omni*
+                                 			*ft-xhtml-omni*
 
 CTRL-X CTRL-O provides completion of various elements of (X)HTML files.
 It is designed to support writing of XHTML 1.0 Strict files but will
@@ -1019,23 +1027,124 @@ also works for other versions of HTML. Features:
   a tag)
 - when attribute has limited number of possible values help to complete
   them
+- complete names of entities
 - complete values of "class" and "id" attributes with data obtained from
   style tag and included CSS files
 - when completing "style" attribute or working inside of "style" tag
   switch to |ft-css-omni| completion
 - when used after "</" CTRL-X CTRL-O will close the last opened tag
 
-File htmlcomplete.vim provides through |autoload| mechanism
+Note: When used first time completion menu will be shown with little delay
+- this is time needed for loading of data file.
+
+
+XML                                                     *ft-xml-omni*
+
+Vim 7 provides mechanism to context aware completion of XML files. It depends
+on special |xml-data-file| and two commands: |:XMLns| and |:XMLent|. Features
+are:
+
+- after "<" complete tag name depending on context (no div suggest
+  inside of an a tag)
+- inside of tag complete proper attributes (no width attribute for an
+  a tag)
+- when attribute has limited number of possible values help to complete
+  them
+- complete names of entities (defined in |xml-data-file| and in current file
+  with "<!ENTITY" declarations
+- when used after "</" CTRL-X CTRL-O will close the last opened tag
+
+Format of XML data file                                 *xml-omni-datafile*
+
+Vim distribution provides two data files as examples (xhtml10s.vim, xsl.vim)
+
+XML data files are stored in "autoload/xml" directory in 'runtimepath'. They
+have meaningful name which will be used in commands. It should be unique name
+which will not create conflicts in future. For example name xhtml10s.vim means
+it is data file for XHTML 1.0 Strict.
+
+File contains one variable with fixed name: g:xmldata_xhtml10s . It is
+compound from two parts: 
+
+1. "g:xmldata_"  general prefix 
+2. "xhtml10s"    name of file and name of described XML dialect
+
+Part two must be exactly the same as name of file.
+
+Variable is data structure in form of |Dictionary|. Keys are tag names and
+values are two element |List|. First element of List is also List with
+names of possible children, second element is |Dictionary| with names of
+attributes as keys and possible values of attributes as values. Example: >
+
+    let g:xmldata_crippledhtml = {
+    \ "html": 
+    \ [ ["body", "head"], {"id": [], "xmlns": ["http://www.w3.org/1999/xhtml"], 
+    \ "lang": [], "xml:lang": [], "dir": ["ltr", "rtl"]}], 
+    \ "script": 
+    \ [ [], {"id": [], "charset": [], "type": ["text/javascript"], "src": [], 
+    \ "defer": ["BOOL"], "xml:space": ["preserve"]}],
+    \ "meta": 
+    \ [ [], {"id": [], "http-equiv": [], "name": [], "content": [], "scheme": 
+    \ [], "lang": [], "xml:lang": [], "dir": ["ltr", "rtl"]}]
+    \ "vimxmlentities": ["amp", "lt", "gt", "apos", "quot"]}
+
+This example should be put in "autoload/xml/crippledhtml.vim" file.
+
+In example are visible two special elements:
+
+1. "vimxmlentities" - special key with List containing entities of this XML
+   dialect.
+2. "BOOL" - value of attribute key showing if attribute should be inserted
+   bare ("defer" vs. 'defer="'). It can be the only element of List of
+   attribute values.
+
+Note: Tag names in data file MUST not contain namespace description. Check
+xsl.vim for example.
+
+Commands
+
+:XMLns {name} [{namespace}]                                  *:XMLns*
+
+Vim has to know which data file should be used and with which namespace. For
+loading of data file and connecting data with prope namespace use |:XMLns|
+command. First (obligatory) argument is name of data (xhtml10s, xsl). Second
+argument is code of namespace (h, xsl). When used without second argument
+dialect will be used as default - without namespace declaration. For example
+to use XML completion in .xsl files: >
+
+	:XMLns xhtml10s
+	:XMLns xsl xsl
+
+
+:XMLent {name}                                               *:XMLent*
+
+By default entities will be completed from data file of default
+namespace. XMLent command should be used in case when there is no
+default namespace: >
+
+        :XMLent xhtml10s
+
+Usage
+
+While used in situation (after declarations from previous part, | is
+cursor position): >
+
+        <|
+
+Will complete to appropriate XHTML tag, and in this situation: >
+
+        <xsl:|
+
+Will complete to appropriate XSL tag.
+
+File xmlcomplete.vim provides through |autoload| mechanism
 GetLastOpenTag function which can be used in XML files to get name of
 last open tag with (b:unaryTagsStack has to be defined): >
 
-        :echo htmlcomplete#GetLastOpenTag("b:unaryTagsStack")
+        :echo xmlcomplete#GetLastOpenTag("b:unaryTagsStack")
 
 
-CSS                                                     *ft-css-omni*
 
-Complete properties and their appropriate values according to CSS 2.1
-specification. 
 
 
 ==============================================================================
diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt
index 618c76712..a5f6d0c62 100644
--- a/runtime/doc/map.txt
+++ b/runtime/doc/map.txt
@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.0aa.  Last change: 2005 Sep 22
+*map.txt*       For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -966,8 +966,10 @@ completion can be enabled:
 	-complete=custom,{func} custom completion, defined via {func}
 	-complete=customlist,{func} custom completion, defined via {func}
 
-Custom completion			    *:command-completion-custom*
-							*E467* *E468*
+
+Custom completion			*:command-completion-custom*
+					*:command-completion-customlist*
+					*E467* *E468*
 It is possible to define customized completion schemes via the "custom,{func}"
 or the "customlist,{func}" completion argument.  The {func} part should be a
 function with the following prototype >
@@ -981,13 +983,13 @@ For the "custom" argument, the function should return the completion
 candidates one per line in a newline separated string.
 
 For the "customlist" argument, the function should return the completion
-candidates as a Vim List. Non-string items in the list are ignored.
+candidates as a Vim List.  Non-string items in the list are ignored.
 
 The function arguments are:
 	ArgLead		the leading portion of the argument currently being
 			completed on
 	CmdLine		the entire command line
-	CursorPos	the cursor position in it
+	CursorPos	the cursor position in it (byte index)
 The function may use these for determining context.  For the "custom"
 argument, it is not necessary to filter candidates against the (implicit
 pattern in) ArgLead.  Vim will do filter the candidates with its regexp engine
@@ -1009,6 +1011,7 @@ the 'path' option: >
     :    return split(globpath(&path, a:ArgLead), "\n")
     :endfun
 <
+
 Range handling						*E177* *E178*
 
 By default, user-defined commands do not accept a line number range.  However,
diff --git a/runtime/doc/mbyte.txt b/runtime/doc/mbyte.txt
index 7f6a972b0..ead91abd3 100644
--- a/runtime/doc/mbyte.txt
+++ b/runtime/doc/mbyte.txt
@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 7.0aa.  Last change: 2005 Jul 09
+*mbyte.txt*     For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -484,6 +484,12 @@ conversion needs to be done.  These conversions are supported:
 	request a very large buffer, more than Vim is willing to provide).
 	Try getting another iconv() implementation.
 
+							*iconv-dynamic*
+On MS-Windows Vim can be compiled with the |+iconv/dyn| feature.  This means
+Vim will search for the "iconv.dll" and "libiconv.dll" libraries.  When
+neither of them can be found Vim will still work but some conversions won't be
+possible.
+
 ==============================================================================
 4. Using a terminal					*mbyte-terminal*
 
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index fcbd44571..0631d454c 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.0aa.  Last change: 2005 Oct 05
+*options.txt*	For Vim version 7.0aa.  Last change: 2005 Nov 23
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -76,10 +76,8 @@ achieve special effects.  These options come in three forms:
 			comma separated list, a comma is added, unless the
 			value was empty.
 			If the option is a list of flags, superfluous flags
-			are removed.  Otherwise there is no check for doubled
-			values.  You can avoid this by removing a value first.
-			Example: >
-				:set guioptions-=T guioptions+=T
+			are removed.  When adding a flag that was already
+			present the option value doesn't change.
 <			Also see |:set-args| above.
 			{not in Vi}
 
@@ -988,6 +986,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Watch out for special characters, see |option-backslash|.
 	When $TMPDIR, $TMP or $TEMP is not defined, it is not used for the
 	default value.  "/tmp/*" is only used for Unix.
+	Note that the default also makes sure that "crontab -e" works (when a
+	backup would be made by renaming the original file crontab won't see
+	the newly created file).  Also see 'backupcopy' and |crontab|.
 
 						*'balloondelay'* *'bdlay'*
 'balloondelay' 'bdlay'	number	(default: 600)
@@ -2927,10 +2928,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The name of an external program that will be used to format the lines
 	selected with the "gq" command.  The program must take the input on
 	stdin and produce the output on stdout.  The Unix program "fmt" is
-	such a program.  If this option is an empty string, the internal
-	format function will be used |C-indenting|.  Environment variables are
-	expanded |:set_env|.  See |option-backslash| about including spaces
-	and backslashes.
+	such a program.
+	If this option is an empty string, the internal format function will
+	be used |C-indenting|.
+	Environment variables are expanded |:set_env|.  See |option-backslash|
+	about including spaces and backslashes.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
diff --git a/runtime/doc/pi_netrw.txt b/runtime/doc/pi_netrw.txt
index 5bce52c14..850dccb3c 100644
--- a/runtime/doc/pi_netrw.txt
+++ b/runtime/doc/pi_netrw.txt
@@ -1,7 +1,7 @@
-*pi_netrw.txt*  For Vim version 7.0.  Last change: Oct 03, 2005
+*pi_netrw.txt*  For Vim version 7.0.  Last change: Aug 31, 2005
 
-		VIM REFERENCE MANUAL    by Charles E. Campbell, Jr.
 
+		VIM REFERENCE MANUAL    by Charles E. Campbell, Jr.
 
 *dav*           *http*          *network*       *rcp*           *scp*
 *fetch*         *netrw*         *Nread*         *rsync*         *sftp*
@@ -25,7 +25,7 @@
 4.  Transparent File Transfer............................|netrw-transparent|
 5.  Ex Commands..........................................|netrw-ex|
 6.  Variables and Options................................|netrw-var|
-7.  Directory Browsing...................................|netrw-browse| {{{1
+7.  Directory Browser....................................|netrw-browse| {{{1
       Maps...............................................|netrw-maps|
       Exploring..........................................|netrw-explore-cmds|
       Quick Reference Commands Table.....................|netrw-browse-cmds|
@@ -194,8 +194,8 @@ file using root-relative paths, use the full path:
 2. Network-Oriented File Transfer				*netrw-xfer*
 
 Network-oriented file transfer under Vim is implemented by a VimL-based script
-(<netrw.vim>) using plugin techniques.  It currently supports both reading and
-writing across networks using rcp, scp, ftp or ftp+<.netrc>, scp, fetch,
+(<netrw.vim>) using plugin techniques.  It currently supports both reading
+and writing across networks using rcp, scp, ftp or ftp+<.netrc>, scp, fetch,
 dav/cadaver, rsync, or sftp.
 
 http is currently supported read-only via use of wget or fetch.
@@ -206,23 +206,24 @@ FileReadCmd, BufWriteCmd) to intercept reads/writes with url-like filenames. >
 
 	ex. vim ftp://hostname/path/to/file
 <
-The characters preceding the colon specify the protocol to use; in the
-example, its ftp.  The <netrw.vim> script then formulates a command or a
-series of commands (typically ftp) which it issues to an external program
-(ftp, scp, etc) which does the actual file transfer/protocol.  Files are read
-from/written to a temporary file (under Unix/Linux, /tmp/...) which the
-<netrw.vim> script will clean up.
-
-One may modify any protocol's implementing external application by setting a
-variable (ex. scp uses the variable g:netrw_scp_cmd, which is defaulted to
-"scp -q").
+The characters preceding the colon specify the protocol to use;
+in the example, its ftp.  The <netrw.vim> script then formulates
+a command or a series of commands (typically ftp) which it issues
+to an external program (ftp, scp, etc) which does the actual file
+transfer/protocol.  Files are read from/written to a temporary file
+(under Unix/Linux, /tmp/...) which the <netrw.vim> script will
+clean up.
+
+One may modify any protocol's implementing external application
+by setting a variable (ex. scp uses the variable g:netrw_scp_cmd,
+which is defaulted to "scp -q").
 
 Ftp, an old protocol, seems to be blessed by numerous implementations.
-Unfortunately, some implementations are noisy (ie., add junk to the end of the
-file).  Thus, concerned users may decide to write a NetReadFixup() function
-that will clean up after reading with their ftp.  Some Unix systems (ie.,
-FreeBSD) provide a utility called "fetch" which uses the ftp protocol but is
-not noisy and more convenient, actually, for <netrw.vim> to use.
+Unfortunately, some implementations are noisy (ie., add junk to the end
+of the file).  Thus, concerned users may decide to write a NetReadFixup()
+function that will clean up after reading with their ftp.  Some Unix systems
+(ie., FreeBSD) provide a utility called "fetch" which uses the ftp protocol
+but is not noisy and more convenient, actually, for <netrw.vim> to use.
 Consequently, if "fetch" is executable, it will be used to do reads for
 ftp://... (and http://...) .  See |netrw-var| for more about this.
 
@@ -331,9 +332,8 @@ The script attempts to get passwords for ftp invisibly using |inputsecret()|,
 a built-in Vim function.  See |netrw-uidpass| for how to change the password
 after one has set it.
 
-Unfortunately there doesn't appear to be a way for netrw to feed a password to
-scp.  Thus every transfer via scp will require re-entry of the password.
-However, |netrw-listhack| can help with this problem.
+Unfortunately there doesn't appear to be a way for netrw to feed a password
+to scp.  Thus every transfer via scp will require re-entry of the password.
 
 
 ==============================================================================
@@ -341,28 +341,21 @@ However, |netrw-listhack| can help with this problem.
 
 Network-oriented file transfers are available by default whenever
 |'nocompatible'| mode is enabled.  The <netrw.vim> file resides in your
-system's vim-plugin directory and is sourced automatically whenever you bring
-up vim.  I suggest that, at a minimum, you have at least the following in your
-<.vimrc> customization file: >
-	set nocp
-	if version >= 600
-	  filetype plugin indent on
-	endif
-<
+system's vim-plugin directory and is sourced automatically whenever you
+bring up vim.
+
 
 ==============================================================================
 4. Transparent File Transfer				*netrw-transparent*
 
 Transparent file transfers occur whenever a regular file read or write
 (invoked via an |:autocmd| for |BufReadCmd| or |BufWriteCmd| events) is made.
-Thus one may use files across networks just as simply as if they were local. >
+Thus one may use files across networks as if they were local. >
 
 	vim ftp://[user@]machine/path
 	...
 	:wq
 
-See |netrw-activate| for more on how to encourage your vim to use plugins
-such as netrw.
 
 ==============================================================================
 5. Ex Commands						*netrw-ex*
@@ -376,7 +369,8 @@ additional commands available.
 :[range]Nw {netfile} [{netfile}]...
 		Write the specified lines to the {netfile}.
 
-:Nread		Read the specified lines into the current
+:Nread
+		Read the specified lines into the current
 		buffer from the file specified in
 		b:netrw_lastfile.
 
@@ -407,11 +401,10 @@ additional commands available.
 
 The script <netrw.vim> uses several variables which can affect <netrw.vim>'s
 behavior.  These variables typically may be set in the user's <.vimrc> file:
-(also see |netrw-settings|) >
-
-                        -------------
-                        Netrw Options
-                        -------------
+>
+                                -------------
+                           	Netrw Options
+                                -------------
 	Option			Meaning
 	--------------		-----------------------------------------------
 <
@@ -488,12 +481,12 @@ variables listed below, and may be modified by the user.
     -------------------------------------------------------------------------
 <
 								*netrw-ftp*
-The first two options both help with certain ftp's that give trouble
-otherwise.  In order to best understand how to use these options if ftp is
-giving you troubles, a bit of discussion follows on how netrw does ftp reads.
+The first two options both help with certain ftp's that give trouble otherwise.
+In order to best understand how to use these options if ftp is giving you
+troubles, a bit of discussion follows on how netrw does ftp reads.
 
-The g:netrw_..._cmd variables specify the external program to use handle the
-associated protocol (rcp, ftp, etc), plus any options.
+The g:netrw_..._cmd variables specify the external program to use handle
+the associated protocol (rcp, ftp, etc), plus any options.
 
 The g:netrw_list_cmd's HOSTNAME entry will be changed via substitution with
 whatever the current request is for a hostname.
@@ -526,8 +519,8 @@ userid and password.  The transferred file is put into a temporary file.
 The temporary file is then read into the main editing session window that
 requested it and the temporary file deleted.
 
-If your ftp doesn't accept the "user" command and immediately just demands a
-userid, then try putting "let netrw_ftp=1" in your <.vimrc>.
+If your ftp doesn't accept the "user" command and immediately just demands
+a userid, then try putting "let netrw_ftp=1" in your <.vimrc>.
 
 								*netrw-cadaver*
 To handle the SSL certificate dialog for untrusted servers, one may pull
@@ -554,12 +547,12 @@ messages) you may write a NetReadFixup(tmpfile) function:
       endif
     endfunction
 >
-The NetReadFixup() function will be called if it exists and thus allows you to
-customize your reading process.  As a further example, <netrw.vim> contains
-just such a function to handle Windows 95 ftp.  For whatever reason, Windows
-95's ftp dumps four blank lines at the end of a transfer, and so it is
-desirable to automate their removal.  Here's some code taken from <netrw.vim>
-itself:
+The NetReadFixup() function will be called if it exists and thus allows
+you to customize your reading process.  As a further example, <netrw.vim>
+contains just such a function to handle Windows 95 ftp.  For whatever
+reason, Windows 95's ftp dumps four blank lines at the end of a transfer,
+and so it is desirable to automate their removal.  Here's some code taken
+from <netrw.vim> itself:
 >
     if has("win95") && g:netrw_win95ftp
      fun! NetReadFixup(method, line1, line2)
@@ -572,7 +565,7 @@ itself:
 >
 
 ==============================================================================
-7. Directory Browsing	*netrw-browse* *netrw-dir* *netrw-list* *netrw-help*
+7. Directory Browser	*netrw-browse* *netrw-dir* *netrw-list* *netrw-help*
 
 MAPS   								*netrw-maps*
      ?................Help.......................................|netrw-help|
@@ -663,13 +656,12 @@ NETRW BROWSER VARIABLES					*netrw-browse-var*
 				 : connect to address [0-9a-fA-F:]*
 				 : No route to host$'
 
-  *g:netrw_ftp_list_cmd*	options for passing along to ftp for directory
-				listing.  Defaults:
-				 unix or g:netrw_cygwin set: : "ls -lF"
-				 otherwise                     "dir"
-
-  *g:netrw_hide*			if true, the hiding list is used
-				 default: =0
+  *g:netrw_ssh_browse_reject*	ssh can sometimes produce unwanted lines,
+				messages, banners, and whatnot that one doesn't
+				want masquerading as "directories" and "files".
+				Use this pattern to remove such embedded
+				messages.  By default its value is:
+ 					 '^total\s\+\d\+$'
 
   *g:netrw_keepdir*		=1 (default) keep current directory immune from
 				   the browsing directory.
@@ -684,11 +676,16 @@ NETRW BROWSER VARIABLES					*netrw-browse-var*
 
   *g:netrw_longlist*		if =1, then long listing will be default
 
+  *g:netrw_ftp_list_cmd*	options for passing along to ftp for directory
+				listing.  Defaults:
+				 unix or g:netrw_cygwin set: : "ls -lF"
+				 otherwise                     "dir"
+
   *g:netrw_list_hide*		comma separated pattern list for hiding files
 				 default: ""
 
   *g:netrw_local_mkdir*		command for making a local directory
-				 default: "mkdir"
+				 default: "ssh HOSTNAME mkdir"
 
   *g:netrw_local_rmdir*		remove directory command (rmdir)
 				 default: "rmdir"
@@ -712,6 +709,9 @@ NETRW BROWSER VARIABLES					*netrw-browse-var*
   *g:netrw_rmf_cmd*		 command for removing softlinks
 				 default: "ssh HOSTNAME rm -f"
 
+  *g:netrw_hide*			if true, the hiding list is used
+				 default: =0
+
   *g:netrw_sort_by*		sort by "name", "time", or "size"
 				 default: "name"
 
@@ -723,18 +723,6 @@ NETRW BROWSER VARIABLES					*netrw-browse-var*
 				 default: '[\/]$,*,\.bak$,\.o$,\.h$,
 				           \.info$,\.swp$,\.obj$'
 
-  *g:netrw_ssh_cmd*		One may specify an executable command
-  				to use instead of ssh for remote actions
-				such as listing, file removal, etc.
-				 default: ssh
-
-  *g:netrw_ssh_browse_reject*	ssh can sometimes produce unwanted lines,
-				messages, banners, and whatnot that one doesn't
-				want masquerading as "directories" and "files".
-				Use this pattern to remove such embedded
-				messages.  By default its value is:
- 					 '^total\s\+\d\+$'
-
   *g:netrw_timefmt*		specify format string to strftime() (%c)
 				 default: "%c"
 
@@ -744,7 +732,7 @@ NETRW BROWSER VARIABLES					*netrw-browse-var*
 INTRODUCTION TO DIRECTORY BROWSING			*netrw-browse-intro*
 
 Netrw supports the browsing of directories on the local system and on remote
-hosts, including listing files and directories, entering directories, editing
+hosts, including generating listing directories, entering directories, editing
 files therein, deleting files/directories, making new directories, and moving
 (renaming) files and directories.  The Netrw browser generally implements the
 previous explorer maps and commands for remote directories, although details
@@ -755,15 +743,13 @@ ftp.  The protocol in the url, if it is ftp, will cause netrw to use ftp
 in its remote browsing.  Any other protocol will be used for file transfers,
 but otherwise the ssh protocol will be used to do remote directory browsing.
 
-To use Netrw's remote directory browser, simply attempt to read a "file" with a
+To enter the netrw directory browser, simply attempt to read a "file" with a
 trailing slash and it will be interpreted as a request to list a directory:
 
 	vim [protocol]://[user@]hostname/path/
 
-For local directories, the trailing slash is not required.
-
-If you'd like to avoid entering the password in for remote directory listings
-with ssh or scp, see |netrw-listhack|.
+If you'd like to avoid entering the password in for directory listings, scp,
+ssh interaction, etc, see |netrw-listhack|.
 
 				*netrw-explore*  *netrw-pexplore*
 				*netrw-hexplore* *netrw-sexplore*
@@ -797,8 +783,7 @@ By default, these commands use the current file's directory.  However, one
 may explicitly provide a directory (path) to use.
 
 (Following needs v7.0 or later)			*netrw-starstar*
-When Explore, Sexplore, Hexplore, or Vexplore are used with a **,
-such as:
+When Explore, Sexplore, Hexplore, or Vexplore are used like
 >
 	:Explore **/filename_pattern
 <
@@ -812,8 +797,7 @@ The directory display is updated to show the subdirectory containing a
 matching file.  One may then proceed to the next (or previous) matching files'
 directories by using Nexplore or Pexplore, respectively.  If your console or
 gui produces recognizable shift-up or shift-down sequences, then you'll likely
-find using shift-downarrow and shift-uparrow convenient.  They're mapped by
-netrw:
+find the following mappings convenient:
 
 	<s-down>  == Nexplore, and
 	<s-up>    == Pexplore.
@@ -838,12 +822,11 @@ refresh a local directory by using ":e .".
 
 GOING UP						*netrw--*
 
-To go up a directory, press "-" or press the <cr> when atop the ../ directory
+To go up a directory, press - or his the <cr> when atop the ../ directory
 entry in the listing.
 
-Netrw will use the command in |g:netrw_list_cmd| to perform the directory
-listing operation after changing HOSTNAME to the host specified by the
-user-provided url.  By default netrw provides the command as:
+Netrw will modify the command in |g:netrw_list_cmd| to perform the directory
+listing operation.  By default the command is:
 
 	ssh HOSTNAME ls -FLa
 
@@ -858,13 +841,7 @@ BROWSING 							*netrw-cr*
 Browsing is simple: move the cursor onto a file or directory of interest.
 Hitting the <cr> (the return key) will select the file or directory.
 Directories will themselves be listed, and files will be opened using the
-protocol given in the original read request.  
-
-  CAVEAT: There are three forms of listing (see |netrw-i|).  Netrw assumes
-  that two or more spaces delimit filenames and directory names for the long
-  and wide listing formats.  Thus, if your filename or directory name has two
-  or more spaces embedded in it, or any trailing spaces, then you'll need to
-  use the "thin" format to select it.
+protocol given in the original read request.
 
 
 OBTAINING A FILE						*netrw-O*
@@ -872,21 +849,7 @@ OBTAINING A FILE						*netrw-O*
 When browsing a remote directory, one may obtain a file under the cursor (ie.
 get a copy on your local machine, but not edit it) by pressing the O key.
 Only ftp and scp are supported for this operation (but since these two are
-available for browsing, that shouldn't be a problem).  The status bar
-will then show, on its right hand side, a message like "Obtaining filename".
-The statusline will be restored after the transfer is complete.
-
-Netrw can also "obtain" a file using the local browser.  Netrw's display
-of a directory is not necessarily the same as Vim's "current directory",
-unless |g:netrw_keepdir| is set to 0 in the user's <.vimrc>.  One may select
-a file using the local browser (by putting the cursor on it) and pressing
-"O" will then "obtain" the file; ie. copy it to Vim's current directory.
-
-Related topics:
- * To see what the current directory is, use |:pwd|
- * To make the currently browsed directory the current directory, see |netrw-c|
- * To automatically make the currently browsed directory the current
-   directory, see |g:netrw_keepdir|.
+available for browsing, that shouldn't be a problem).
 
 
 THIN, LONG, AND WIDE LISTINGS					*netrw-i*
@@ -896,27 +859,21 @@ The "i" map cycles between the thin, long, and wide listing formats.
 The short listing format gives just the files' and directories' names.
 
 The long listing is either based on the "ls" command via ssh for remote
-directories or displays the filename, file size (in bytes), and the time and
-date of last modification for local directories.  With the long listing
-format, netrw is not able to recognize filenames which have trailing spaces.
-Use the thin listing format for such files.
+directories or displays the filename, file size (in bytes), and the
+time and date of last modification for local directories.
 
-The wide listing format has a multi-column display of the various files in the
-netrw current directory, rather like the Unix "ls" presents.  In this mode the
-"b" and "B" maps are not available; instead, use Nb (|netrw-Nb|) and NB
-(|netrw-NB|).  The wide listing format uses two or more contiguous spaces to
-delineate filenames; when using that format, netrw won't be able to recognize
-or use filenames which have two or more contiguous spaces embedded in the name
-or any trailing spaces.  The thin listing format will, however, work with such
-files.
+The wide listing format has a multi-column display of the various
+files in the netrw current directory, rather like the Unix "ls" presents.
+In this mode the "b" and "B" maps are not available; instead, use
+Nb (|netrw-Nb|) and NB (|netrw-NB|).
 
 
 MAKING A NEW DIRECTORY						*netrw-d*
 
-With the "d" map one may make a new directory either remotely (which depends
-on the global variable g:netrw_mkdir_cmd) or locally (which depends on the
-global variable g:netrw_local_mkdir).  Netrw will issue a request for the new
-directory's name.  A bare <CR> at that point will abort the making of the
+With the "d" map one may make a new directory either remotely (which
+depends on the global variable g:netrw_mkdir_cmd) or locally (which depends on
+the global variable g:netrw_local_mkdir).  Netrw will issue a request for the
+new directory's name.  A bare <CR> at that point will abort the making of the
 directory.  Attempts to make a local directory that already exists (as either
 a file or a directory) will be detected, reported on, and ignored.
 
@@ -924,12 +881,12 @@ a file or a directory) will be detected, reported on, and ignored.
 DELETING FILES OR DIRECTORIES			*netrw-delete* *netrw-D*
 
 Deleting/removing files and directories involves moving the cursor to the
-file/directory to be deleted and pressing "D".  Directories must be empty
-first before they can be successfully removed.  If the directory is a softlink
-to a directory, then netrw will make two requests to remove the directory
-before succeeding.  Netrw will ask for confirmation before doing the
-removal(s).  You may select a range of lines with the "V" command (visual
-selection), and then pressing "D".
+file/directory to be deleted and pressing "D".  Directories must be empty first
+before they can be successfully removed.  If the directory is a softlink to a
+directory, then netrw will make two requests to remove the directory before
+succeeding.  Netrw will ask for confirmation before doing the removal(s).
+You may select a range of lines with the "V" command (visual selection),
+and then pressing "D".
 
 The g:netrw_rm_cmd, g:netrw_rmf_cmd, and g:netrw_rmdir_cmd variables are used
 to control the attempts to remove files and directories.  The g:netrw_rm_cmd
@@ -966,17 +923,17 @@ the V (|linewise-visual|).
 
 HIDING FILES OR DIRECTORIES				*netrw-a*
 
-Netrw's browsing facility allows one to use the hiding list in one of three
-ways: ignore it, hide files which match, and show only those files which
-match.  The "a" map allows the user to cycle about these three ways.
+Netrw's browsing facility allows one to use the hiding list in one of
+three ways: ignore it, hide files which match, and show only those files
+which match.  The "a" map allows the user to cycle about these three ways.
 
-The g:netrw_list_hide variable holds a comma delimited list of patterns (ex.
-\.obj) which specify the hiding list. (also see |netrw-h|)  To set the hiding
-list, use the <c-h> map.  As an example, to hide files which begin with a ".",
-one may use the <c-h> map to set the hiding list to '^\..*' (or one may put
-let g:netrw_list_hide= '^\..*' in one's <.vimrc>).  One may then use the "a"
-key to show all files, hide matching files, or to show only the matching
-files.
+The g:netrw_list_hide variable holds a comma delimited list of patterns
+(ex. \.obj) which specify the hiding list. (also see |netrw-h|)  To
+set the hiding list, use the <c-h> map.  As an example, to hide files
+which begin with a ".", one may use the <c-h> map to set the hiding
+list to '^\..*' (or one may put  let g:netrw_list_hide= '^\..*' in
+one's <.vimrc>).  One may then use the "a" key to show all files,
+hide matching files, or to show only the matching files.
 
 
 EDIT FILE OR DIRECTORY HIDING LIST		*netrw-h* *netrw-edithide*
@@ -984,8 +941,7 @@ EDIT FILE OR DIRECTORY HIDING LIST		*netrw-h* *netrw-edithide*
 The "<ctrl-h>" map brings up a requestor allowing the user to change the
 file/directory hiding list.  The hiding list consists of one or more patterns
 delimited by commas.  Files and/or directories satisfying these patterns will
-either be hidden (ie. not shown) or be the only ones displayed (see
-|netrw-a|).
+either be hidden (ie. not shown) or be the only ones displayed (see |netrw-a|).
 
 
 BROWSING WITH A HORIZONTALLY SPLIT WINDOW		*netrw-o* *netrw-horiz*
@@ -994,9 +950,9 @@ Normally one enters a file or directory using the <cr>.  However, the "o" map
 allows one to open a new window to hold the new directory listing or file.  A
 horizontal split is used.  (for vertical splitting, see |netrw-v|)
 
-Normally, the o key splits the window horizontally with the new window and
-cursor at the top.  To change to splitting the window horizontally with the
-new window and cursor at the bottom, have
+Normally, the o key splits the window horizontally with the new window
+and cursor at the top.  To change to splitting the window horizontally
+with the new window and cursor at the bottom, have
 
 	let g:netrw_alto = 1
 
@@ -1005,30 +961,30 @@ in your <.vimrc>.
 
 PREVIEW WINDOW					*netrw-p* *netrw-preview*
 
-One may use a preview window (currently only for local browsing) by using the
-"p" key when the cursor is atop the desired filename to be previewed.
+One may use a preview window (currently only for local browsing) by using
+the "p" key when the cursor is atop the desired filename to be previewed.
 
 
 SELECTING SORTING STYLE				*netrw-s* *netrw-sort*
 
-One may select the sorting style by name, time, or (file) size.  The "s" map
-allows one to circulate amongst the three choices; the directory listing will
-automatically be refreshed to reflect the selected style.
+One may select the sorting style by name, time, or (file) size.  The
+"s" map allows one to circulate amongst the three choices; the directory
+listing will automatically be refreshed to reflect the selected style.
 
 
 EDITING THE SORTING SEQUENCE		*netrw-S* *netrw-sortsequence*
 
-When "Sorted by" is name, one may specify priority via the sorting sequence
-(g:netrw_sort_sequence).  The sorting sequence typically prioritizes the
-name-listing by suffix, although any pattern will do.  Patterns are delimited
-by commas.  The default sorting sequence is:
+When "Sorted by" is name, one may specify priority via the sorting
+sequence (g:netrw_sort_sequence).  The sorting sequence typically
+prioritizes the name-listing by suffix, although any pattern will do.
+Patterns are delimited by commas.  The default sorting sequence is:
 >
 	[\/]$,*,\.bak$,\.o$,\.h$,\.info$,\.swp$,\.obj$
 <
-The lone * is where all filenames not covered by one of the other patterns
-will end up.  One may change the sorting sequence by modifying the
-g:netrw_sort_sequence variable (either manually or in your <.vimrc>) or by
-using the "S" map.
+The lone * is where all filenames not covered by one of the other
+patterns will end up.  One may change the sorting sequence by modifying
+the g:netrw_sort_sequence variable (either manually or in your <.vimrc>)
+or by using the "S" map.
 
 
 REVERSING SORTING ORDER			*netrw-r* *netrw-reverse*
@@ -1055,13 +1011,13 @@ q map to list both the bookmarks and history. (see |netrw-q|)
 
 BROWSING WITH A VERTICALLY SPLIT WINDOW				*netrw-v*
 
-Normally one enters a file or directory using the <cr>.  However, the "v" map
-allows one to open a new window to hold the new directory listing or file.  A
-vertical split is used.  (for horizontal splitting, see |netrw-o|)
+Normally one enters a file or directory using the <cr>.  However, the "v"
+map allows one to open a new window to hold the new directory listing or
+file.  A vertical split is used.  (for horizontal splitting, see |netrw-o|)
 
-Normally, the v key splits the window vertically with the new window and
-cursor at the left.  To change to splitting the window vertically with the new
-window and cursor at the right, have
+Normally, the v key splits the window vertically with the new window
+and cursor at the left.  To change to splitting the window vertically
+with the new window and cursor at the right, have
 
 	let g:netrw_altv = 1
 
@@ -1077,24 +1033,24 @@ handler varies:
   * for Windows 32 or 64, the url and FileProtocolHandler dlls are used.  
   * for KDE (with kfmclient): kfmclient is used.
   * for Gnome (with gnome-open): gnome-open is used.
-  * otherwise the netrwFileHandler plugin is used.
+  * otherwise the NetrwFileHandler plugin is used.
 
 The file's suffix is used by these various approaches to determine an
-appropriate application to use to "handle" these files.  Such things as
-OpenOffice (*.sfx), visualization (*.jpg, *.gif, etc), and PostScript (*.ps,
-*.eps) can be handled.
+appropriate application to use to "handle" these files.  Such things
+as OpenOffice (*.sfx), visualization (*.jpg, *.gif, etc), and PostScript
+(*.ps, *.eps) can be handled.
 
-The netrwFileHandler applies a user-defined function to a file, based on its
+The NetrwFileHandler applies a user-defined function to a file, based on its
 extension.  Of course, the handler function must exist for it to be called!
 >
  Ex. mypgm.html   x ->
-                  netrwFileHandler_html("scp://user@host/some/path/mypgm.html")
+                  NetrwFileHandler_html("scp://user@host/some/path/mypgm.html")
 <
-See the <plugin/netrwFileHandlers.vim> for an example of how to handle an html
+See the <plugin/NetrwFileHandlers.vim> for an example of how to handle an html
 file with mozilla.
 
-One may write custom netrwFileHandlers; please look at the
-plugin/netrwFileHandlers.vim script for examples.  If its likely to be
+One may write custom NetrwFileHandlers; please look at the
+plugin/NetrwFileHandlers.vim script for examples.  If its likely to be
 generally useful, please feel free to forward a copy to me for future
 inclusion in the distribution.
 
@@ -1107,8 +1063,8 @@ g:netrw_keepdir to 0 (say, in your <.vimrc>) will tell netrw to have the
 currently browsed directory be the current directory.
 
 With the default setting for g:netrw_keepdir, in order to make the two
-directories the same, use the "c" map (just type c).  That map will set the
-current directory to the current browsing directory.
+directories the same, use the "c" map (just type c).  That map will set
+the current directory to the current browsing directory.
 
 
 BOOKMARKING A DIRECTORY		*netrw-b* *netrw-bookmark* *netrw-bookmarks*
@@ -1131,8 +1087,8 @@ To change directory back to a bookmarked directory, use
 
 	{cnt}B
 
-Any count may be used to reference any of the bookmarks.  See |netrw-b| on
-how to bookmark a directory and |netrw-q| on how to list bookmarks.
+Any count may be used to reference any of the bookmarks.  See |netrw-b|
+for how to bookmark a directory and |netrw-q| for how to list them.
 
 When wide listing is in use (see |netrw-i|), then the B map is not available;
 instead, use {cnt}NB.
@@ -1162,9 +1118,9 @@ NETRW SETTINGS						*netrw-settings*
 With the NetrwSettings.vim plugin, >
 	:NetrwSettings
 will bring up a window with the many variables that netrw uses for its
-settings.  You may change any of their values; when you save the file, the
-settings therein will be used.  One may also press "?" on any of the lines for
-help on what each of the variables do.
+settings.  You may change any of their values; when you save the file,
+the settings therein will be used.  One may also press "?" on any of
+the lines for help on what each of the variables do.
 
 
 ==============================================================================
@@ -1284,33 +1240,6 @@ which is loaded automatically at startup (assuming :set nocp).
 ==============================================================================
 10. History						*netrw-history*
 
-	v73: * bugfix -- scp://host/path/file was getting named incorrectly
-	     * netrw detects use of earlier-than-7.0 version of vim and issues
-	       a pertinent error message.
-	     * netrwSettings.vim is now uses autoloading.  Only
-	       <netrwPlugin.vim> is needed as a pure plugin
-	       (ie. always loaded).
-	v72: * bugfix -- formerly, one could prevent the loading of netrw
-	       by "let g:loaded_netrw=1"; when autoloading became supported,
-	       this feature was lost.  It is now restored.
-	v71: * bugfix -- made some "set nomodifiable"s into setlocal variants
-	       (allows :e somenewfile  to be modifiable as usual)
-	     * NetrwSettings calls a netrw function, thereby assuring that
-	       netrw has loaded.  However, if netrw does not load for whatever
-	       reason, then NetrwSettings will now issue a warning message.
-	     * For what reason I don't recall, when wget and fetch are both
-	       not present, and an attempt to read a http://... url is made,
-	       netrw exited.  It now only returns.
-	     * When ch=1, on the second and subsequent uses of browsing Netrw
-	       would issue a blank line to clear the echo'd messages.  This
-	       caused an annoying "Hit-Enter" prompt; now a blank line message
-	       is echo'd only if &ch>1.
-	v70: * when using |netrw-O|, the "Obtaining filename" message is now
-	       shown using |hl-User9|.  If User9 has not been defined, netrw
-	       will define it.
-	v69: * Bugfix: win95/98 machines were experiencing a
-	       "E121: Undefined variable: g:netrw_win95ftp" message
-	v68: * double-click-leftmouse selects word under mouse
 	v67: * Passwords which contain blanks will now be surrounded by
 	       double-quotes automatically (Yongwei)
 	v66: * Netrw now seems to work with a few more Windows situations
@@ -1426,7 +1355,7 @@ which is loaded automatically at startup (assuming :set nocp).
 	     * special file viewing with:
 	       (windows) rundll32 url.dll (gnome)   gnome-open (kde)
 	       kfmclient If none of these are on the executable path, then
-	       netrwFileHandlers.vim is used.
+	       NetrwFileHandlers.vim is used.
 	     * directory bookmarking during both local and remote browsing
 	       implemented
 	     * one may view all, use the hiding list to suppress, or use the
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 35f00c387..2fb97ba14 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -1062,6 +1062,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 +gettext	various.txt	/*+gettext*
 +hangul_input	various.txt	/*+hangul_input*
 +iconv	various.txt	/*+iconv*
++iconv/dyn	various.txt	/*+iconv\/dyn*
 +insert_expand	various.txt	/*+insert_expand*
 +jumplist	various.txt	/*+jumplist*
 +keymap	various.txt	/*+keymap*
@@ -1090,13 +1091,16 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 +osfiletype	various.txt	/*+osfiletype*
 +path_extra	various.txt	/*+path_extra*
 +perl	various.txt	/*+perl*
++perl/dyn	various.txt	/*+perl\/dyn*
 +postscript	various.txt	/*+postscript*
 +printer	various.txt	/*+printer*
 +profile	various.txt	/*+profile*
 +python	various.txt	/*+python*
++python/dyn	various.txt	/*+python\/dyn*
 +quickfix	various.txt	/*+quickfix*
 +rightleft	various.txt	/*+rightleft*
 +ruby	various.txt	/*+ruby*
++ruby/dyn	various.txt	/*+ruby\/dyn*
 +scrollbind	various.txt	/*+scrollbind*
 +signs	various.txt	/*+signs*
 +smartindent	various.txt	/*+smartindent*
@@ -1109,6 +1113,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 +tag_binary	various.txt	/*+tag_binary*
 +tag_old_static	various.txt	/*+tag_old_static*
 +tcl	various.txt	/*+tcl*
++tcl/dyn	various.txt	/*+tcl\/dyn*
 +terminfo	various.txt	/*+terminfo*
 +termresponse	various.txt	/*+termresponse*
 +textobjects	various.txt	/*+textobjects*
@@ -1663,6 +1668,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :TOhtml	syntax.txt	/*:TOhtml*
 :Vexplore	pi_netrw.txt	/*:Vexplore*
 :X	editing.txt	/*:X*
+:XMLent	insert.txt	/*:XMLent*
+:XMLns	insert.txt	/*:XMLns*
 :\bar	cmdline.txt	/*:\\bar*
 :_!	cmdline.txt	/*:_!*
 :_#	cmdline.txt	/*:_#*
@@ -1839,6 +1846,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :command	map.txt	/*:command*
 :command-completion	map.txt	/*:command-completion*
 :command-completion-custom	map.txt	/*:command-completion-custom*
+:command-completion-customlist	map.txt	/*:command-completion-customlist*
 :command-verbose	map.txt	/*:command-verbose*
 :comment	eval.txt	/*:comment*
 :comp	quickfix.txt	/*:comp*
@@ -5007,6 +5015,7 @@ ft-java-syntax	syntax.txt	/*ft-java-syntax*
 ft-ksh-syntax	syntax.txt	/*ft-ksh-syntax*
 ft-lace-syntax	syntax.txt	/*ft-lace-syntax*
 ft-lex-syntax	syntax.txt	/*ft-lex-syntax*
+ft-lisp-syntax	syntax.txt	/*ft-lisp-syntax*
 ft-lite-syntax	syntax.txt	/*ft-lite-syntax*
 ft-lpc-syntax	syntax.txt	/*ft-lpc-syntax*
 ft-lua-syntax	syntax.txt	/*ft-lua-syntax*
@@ -5059,6 +5068,8 @@ ft-verilog-indent	indent.txt	/*ft-verilog-indent*
 ft-vim-indent	indent.txt	/*ft-vim-indent*
 ft-vim-syntax	syntax.txt	/*ft-vim-syntax*
 ft-xf86conf-syntax	syntax.txt	/*ft-xf86conf-syntax*
+ft-xhtml-omni	insert.txt	/*ft-xhtml-omni*
+ft-xml-omni	insert.txt	/*ft-xml-omni*
 ft-xml-syntax	syntax.txt	/*ft-xml-syntax*
 ft-xpm-syntax	syntax.txt	/*ft-xpm-syntax*
 ftdetect	filetype.txt	/*ftdetect*
@@ -5302,6 +5313,7 @@ hebrew	hebrew.txt	/*hebrew*
 hebrew.txt	hebrew.txt	/*hebrew.txt*
 help	various.txt	/*help*
 help-context	help.txt	/*help-context*
+help-tags	tags	1
 help-translated	various.txt	/*help-translated*
 help-xterm-window	various.txt	/*help-xterm-window*
 help.txt	help.txt	/*help.txt*
@@ -5513,6 +5525,7 @@ icon-changed	version4.txt	/*icon-changed*
 iconise	starting.txt	/*iconise*
 iconize	starting.txt	/*iconize*
 iconv()	eval.txt	/*iconv()*
+iconv-dynamic	mbyte.txt	/*iconv-dynamic*
 ident-search	tips.txt	/*ident-search*
 if_cscop.txt	if_cscop.txt	/*if_cscop.txt*
 if_mzsch.txt	if_mzsch.txt	/*if_mzsch.txt*
@@ -5658,6 +5671,7 @@ linefeed	intro.txt	/*linefeed*
 linewise	motion.txt	/*linewise*
 linewise-register	change.txt	/*linewise-register*
 linewise-visual	visual.txt	/*linewise-visual*
+lisp.vim	syntax.txt	/*lisp.vim*
 lispindent()	eval.txt	/*lispindent()*
 list-identity	eval.txt	/*list-identity*
 list-index	eval.txt	/*list-index*
@@ -6111,6 +6125,7 @@ perl-SetHeight	if_perl.txt	/*perl-SetHeight*
 perl-SetOption	if_perl.txt	/*perl-SetOption*
 perl-Windows	if_perl.txt	/*perl-Windows*
 perl-compiling	if_perl.txt	/*perl-compiling*
+perl-dynamic	if_perl.txt	/*perl-dynamic*
 perl-editing	if_perl.txt	/*perl-editing*
 perl-overview	if_perl.txt	/*perl-overview*
 perl-patterns	pattern.txt	/*perl-patterns*
@@ -6174,6 +6189,7 @@ python-buffers	if_pyth.txt	/*python-buffers*
 python-command	if_pyth.txt	/*python-command*
 python-commands	if_pyth.txt	/*python-commands*
 python-current	if_pyth.txt	/*python-current*
+python-dynamic	if_pyth.txt	/*python-dynamic*
 python-error	if_pyth.txt	/*python-error*
 python-eval	if_pyth.txt	/*python-eval*
 python-examples	if_pyth.txt	/*python-examples*
@@ -6310,6 +6326,7 @@ ruby	if_ruby.txt	/*ruby*
 ruby-buffer	if_ruby.txt	/*ruby-buffer*
 ruby-command	if_ruby.txt	/*ruby-command*
 ruby-commands	if_ruby.txt	/*ruby-commands*
+ruby-dynamic	if_ruby.txt	/*ruby-dynamic*
 ruby-evaluate	if_ruby.txt	/*ruby-evaluate*
 ruby-globals	if_ruby.txt	/*ruby-globals*
 ruby-message	if_ruby.txt	/*ruby-message*
@@ -6774,6 +6791,7 @@ tcl-buffer-windows	if_tcl.txt	/*tcl-buffer-windows*
 tcl-bugs	if_tcl.txt	/*tcl-bugs*
 tcl-command	if_tcl.txt	/*tcl-command*
 tcl-commands	if_tcl.txt	/*tcl-commands*
+tcl-dynamic	if_tcl.txt	/*tcl-dynamic*
 tcl-ex-commands	if_tcl.txt	/*tcl-ex-commands*
 tcl-examples	if_tcl.txt	/*tcl-examples*
 tcl-expr	if_tcl.txt	/*tcl-expr*
@@ -7266,6 +7284,7 @@ xim	mbyte.txt	/*xim*
 xim-input-style	mbyte.txt	/*xim-input-style*
 xiterm	syntax.txt	/*xiterm*
 xml-folding	syntax.txt	/*xml-folding*
+xml-omni-datafile	insert.txt	/*xml-omni-datafile*
 xml.vim	syntax.txt	/*xml.vim*
 xpm.vim	syntax.txt	/*xpm.vim*
 xterm-8-bit	term.txt	/*xterm-8-bit*
@@ -7337,13 +7356,6 @@ zf	fold.txt	/*zf*
 zg	spell.txt	/*zg*
 zh	scroll.txt	/*zh*
 zi	fold.txt	/*zi*
-zip	zip.txt	/*zip*
-zip-contents	zip.txt	/*zip-contents*
-zip-copyright	zip.txt	/*zip-copyright*
-zip-history	zip.txt	/*zip-history*
-zip-manual	zip.txt	/*zip-manual*
-zip-usage	zip.txt	/*zip-usage*
-zip.txt	zip.txt	/*zip.txt*
 zj	fold.txt	/*zj*
 zk	fold.txt	/*zk*
 zl	scroll.txt	/*zl*
diff --git a/runtime/doc/tagsrch.txt b/runtime/doc/tagsrch.txt
index fbecaa2ba..522eb2a64 100644
--- a/runtime/doc/tagsrch.txt
+++ b/runtime/doc/tagsrch.txt
@@ -1,4 +1,4 @@
-*tagsrch.txt*   For Vim version 7.0aa.  Last change: 2005 Jul 12
+*tagsrch.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -440,7 +440,7 @@ directory.  If it is not found there, then the file "/home/user/commontags"
 will be searched for the tag.
 
 This can be switched off by including the 'd' flag in 'cpoptions', to make
-it Vi compatible.  "./tags" will than be the tags file in the current
+it Vi compatible.  "./tags" will then be the tags file in the current
 directory, instead of the tags file in the directory where the current file
 is.
 
diff --git a/runtime/doc/tar.txt b/runtime/doc/tar.txt
new file mode 100644
index 000000000..f43140da4
--- /dev/null
+++ b/runtime/doc/tar.txt
@@ -0,0 +1,37 @@
+*tar.txt*	Tar File Interface				Nov 03, 2005
+
+Author:  Charles E. Campbell, Jr.  <NdrOchip@ScampbellPfamily.AbizM>
+	  (remove NOSPAM from Campbell's email first)
+Copyright: The GPL (gnu public license) applies to	*tar-copyright*
+	   tarPlugin.vim, and tar.txt.
+	   No warranty, express or implied.  Use At-Your-Own-Risk.
+
+==============================================================================
+1. Contents					*tar* *tar-contents*
+   1. Contents..................................................|tar-contents|
+   2. Usage.....................................................|tar-usage|
+   3. History...................................................|tar-history|
+
+==============================================================================
+2. Usage					*tar-usage* *tar-manual*
+
+   When one edits a *.tar file, this plugin will handle displaying a
+   contents page.  Select a file to edit by moving the cursor atop
+   the desired file, then hit the <return> key.  After editing, one may
+   also write to the file.  Currently, one may not make a new file in
+   tar archives via the plugin.
+
+==============================================================================
+3. History						*tar-history*
+   v3 Sep 16, 2005       * handles writing files in an archive back to the
+                           archive
+      Oct 18, 2005       * <amatch> used instead of <afile> in autocmds
+      Oct 18, 2005       * handles writing to compressed archives
+      Nov 03, 2005       * handles writing tarfiles across a network using
+                           netrw#NetWrite()
+   v2                    * converted to use Vim7's new autoload feature by
+                           Bram Moolenaar
+   v1 (original release) * Michael Toren (see http://michael.toren.net/code/)
+
+==============================================================================
+vim:tw=78:ts=8:ft=help
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index e856a5627..14097a936 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.0aa.  Last change: 2005 Oct 12
+*todo.txt*      For Vim version 7.0aa.  Last change: 2005 Nov 23
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -30,18 +30,66 @@ be worked on, but only if you sponsor Vim development.  See |sponsor|.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
+Using chown() is unsafe. (Jinpeng Wei)
+    ex_cmds.c: viminfo tempfile: use mch_open(O_EXCL) and fdopen()
+    fileio.c: use fchown() instead of chown()
+    vim.h: define O_NOFOLLOW if needed.  Not in Vim 6.4?
+
+Go over all changes between 6.3 and 6.4 and make sure they are included in 7.
+
+'statusline' is drawn over the Omni menu.
+
+Cygwin and Mac OS/X may preserve case for file names but ignore case
+differences.  Use Amiga code?
+
+"make unixall": remove split in floppy-size archives.
+
+To support mapping <F4> to be used as <F4>{motion}: Add operator that
+executes a user defined function. '[ and '] marks are at start and end of
+text.  ":map <F4> :set opfunc=MyOp<CR>gy".
+
+Patch from Yasuhiro Matsumoto: ":e ++enc=xxx" keeps encoding for conversion
+errors and illegal bytes.  How about replacing bytes with '?' or not?
+
 ccomplete:
 - When an option is set: In completion mode and the user types (identifier)
   characters, advance to the first match instead of removing the popup menu.
   If there is no match remove the selection. (Yegappan Lakshmanan)
+- Complete the longest common match instead of the first match?
+- !_TAG_FILE_FORMAT and it's ilk are listed in the global completions
 - When completing something that is a structure, add the "." or "->".
 - When a typedef or struct is local to a file only use it in that file?
+- Window resize when poup is displayed
+- page-up / page-down
 
 spelling:
 - When a recognized word ends in a . don't have 'spellcapcheck" match it.
-- Use KEEPCASE instead of "KEP".  applies to affixes too.
+- Use KEEPCASE instead of "KEP".  It applies to the word including affixes
+  Hunspell also uses it.
+- Hunspell has NOSUGGEST flag (use for obscene words?)
+- Check out Hunspell 1.1.2.
 - Look into hungarian dictionary:
   http://magyarispell.sourceforge.net/rc3-beta2.zip
+- Support breakpoint character · 0xb7 and ignore it?
+- Dutch word list should be available here: http://www.woordenlijst.org/
+8   Alternate Dutch word list at www.nederlandsewoorden.nl (use script to
+    obtain).  But new Myspell wordlist will come (Hagen)
+- Finding suggestions with sound folding is slow.  Somehow store the
+  sound-folded words and link to the words it comes from?
+
+When editing a file "a" that is a symbolic link to "b", while another Vim is
+editing "b", there is no warning.  Follow symlink to make swap file name?
+Patch from Stefano Zacchiroli.
+
+In diff mode deleting lines is very slow.  E.g., when diffing two .po files
+and then sourcing po/cleaup.vim.
+
+7   Add plugins for formatting.  Should be able to make a choice depending on
+    the language of a file (English/Korean/Japanese/etc.).
+    Setting the 'langformat' option to "chinese" would load the
+    "format/chinese.vim" plugin.
+Edward L. Fox explains how it should be done for most Asian languages. (2005
+Nov 24)
 
 Mac unicode patch (Da Woon Jung):
 - selecting proportional font breaks display
@@ -52,10 +100,15 @@ Mac unicode patch (Da Woon Jung):
 - With 'nopaste' pasting is wrong, with 'paste' Command-V doesn't work.
   (Alan Schmitt)
 
+Patch to add a few flags to search(). (Benji Fisher, Nov 22)
+
 Win32: Use the free downloadable compiler 7.1.  Figure out how to do debugging
 (with Agide?) and describe it. (George Reilly)
 Try out using the free MS compiler and debugger, using Make_mvc.mak.
 
+Win32: Check that installer puts menu items in "all users" dir when possible,
+not administrator dir.
+
 Autoload:
 - Add a Vim script in $VIMRUNTIME/tools that takes a file with a list of
   script names and a help file and produces a script that can be sourced to
@@ -67,7 +120,8 @@ Autoload:
     helpfile doc/myscript.txt
   For the "helpfile" item ":helptags" is run.
 
-Add ":smap", Select mode mapping?
+Add ":smap", Select mode mapping?  Otherwise: ":sunmap", so that Visual mode
+mappings for normal keys can be removed from Select mode.
 
 Awaiting response:
 -   Win32: tearoff menu window should have a scrollbar when it's taller than
@@ -88,6 +142,10 @@ PLANNED FOR VERSION 7.0:
     make it work for all completion methods.
 
     UI:
+    - Complete longest common string first, like 'wildmode' "longest:full".
+    - Add an "auto" mode: after typing a character (or string) completion is
+      done for the longest common string.  plugin defines the possible
+      characters/strings. (Martin Stubenschrott)
     - GUI implementation of the popup menu.
     - When using tags, show match in preview window (function prototype,
       struct member, etc.).
@@ -191,9 +249,9 @@ PLANNED FOR VERSION 7.0:
     For GTK Neil Bird has a patch to use Vim like a widget.
 -   Add COLUMN NUMBERS to ":" commands ":line1,line2[col1,col2]cmd".  Block
     can be selected with CTRL-V.  Allow '$' (end of line) for col2.
--   Add DEBUGGER INTERFACE.  Implementation for gdb by Xavier de Gaye,
-    assisted by Mikolaj Machowski.  Should work like an IDE.  Try to keep it
-    generic.  Also found here: http://skawina.eu.org/mikolaj/vimgdb
+-   Add DEBUGGER INTERFACE.  Implementation for gdb by Xavier de Gaye.
+    Should work like an IDE.  Try to keep it generic.  Now found here:
+    http://clewn.sf.net.
     And the idevim plugin/script.
     To be able to start the debugger from inside Vim: For GUI run a program
     with a netbeans connection; for console: start a program that splits the
@@ -207,6 +265,7 @@ PLANNED FOR VERSION 7.0:
     implement part in Java and then connect to Vim.  Some hints from Alexandru
     Roman, 2004 Dec 15.  Should then also work with Oracle Jdeveloper, see JSR
     198 standard http://www.jcp.org/en/jsr/detail?id=198.
+    Eclim does it: http://eclim.sourceforge.net/  (Eric Van Dewoestine)
 -   STICKY CURSOR: Add a way of scrolling that leaves the cursor where it is.
     Especially when using the scrollbar.  Typing a cursor-movement command
     scrolls back to where the cursor is.
@@ -353,7 +412,9 @@ Awaiting updated patches:
 	How does this work?  Missing comments.
 	gettext()	Translate a message.  (Patch from Yasuhiro Matsumoto)
 			Update 2004 Sep 10
-			More docs.  Search in 'runtimepath'?
+			Another patch from Edward L. Fox (2005 Nov 24)
+			Search in 'runtimepath'?
+			More docs about how to use this.
 			How to get the messages into the .po files?
     --- did not respond (yet) --
     -	Patch for 'breakindent' option: repeat indent for wrapped line. (Vaclav
@@ -395,7 +456,7 @@ Awaiting updated patches:
     7   When 'rightleft' is set, the search pattern should be displayed right
 	to left as well?  See patch of Dec 26. (Nadim Shaikli)
     8   Lock all used memory so that it doesn't get swapped to disk (uncrypted).
-	Patch by Jason Holt, 2003 May 23.
+	Patch by Jason Holt, 2003 May 23.  Uses mlock.
     7   Support a stronger encryption.  Jason Holt implemented AES (May 6 2003).
     7   Add ! register, for shell commands. (patch from Grenie)
     8   In the gzip plugin, also recognize *.gz.orig, *.gz.bak, etc.  Like it's
@@ -791,7 +852,16 @@ MSDOS, OS/2 and Win32:
 8   OS/2: Add Extended Attributes support and define HAVE_ACL.
 8   OS/2: When editing a file name "foo.txt" that is actually called FOO.txt,
     writing uses "foo.txt".  Should obtain the real file name.
-8   Should $USERPROFILE be preferred above $HOMEDRIVE/$HOMEPATH?
+8   Should $USERPROFILE be preferred above $HOMEDRIVE/$HOMEPATH?  No, but it's
+    a good fallback, thus use:
+	    $HOME
+	    $HOMEDRIVE$HOMEPATH
+	    SHGetSpecialFolderPath(NULL, lpzsPath, CSIDL_APPDATA, FALSE);
+	    $USERPROFILE
+	    SHGetSpecialFolderPath(NULL, lpzsPath, CSIDL_COMMON_APPDATA, FALSE);
+	    $ALLUSERSPROFILE
+	    $SYSTEMDRIVE\
+	    C:\
 8   Win32 console: <M-Up> and <M-Down> don't work. (Geddes)  We don't have
     special keys for these.  Should use modifier + key.
 8   Win32 console: caps-lock makes non-alpha keys work like with shift.
@@ -1382,22 +1452,19 @@ Spell checking:
 8   Make "en-rare" spell file?  Ask Charles Campbell.
 8   The English dictionaries for different regions are not consistent in their
     use of words with a dash.
-8   Alternate Dutch word list at www.nederlandsewoorden.nl (use script to
-    obtain).  But new Myspell wordlist will come (Hagen)
 7   Insert mode completion mechanism that uses the spell word lists.
 8   Add hl groups to 'spelllang'?
 	:set spelllang=en_us,en-rare/SpellRare,en-math/SpellMath
     More complicated: Regions with different languages?  E.g., comments
     in English, strings in German (po file).
-8   Implement compound words when it works for Myspell.  Current idea has the
-    problem that "foo/X" always allows "foofoo", there is no way to specify a
-    word can only be at the start or end, or that only certain words combine.
 
 
 Diff mode:
 8   Use diff mode to show the changes made in a buffer (compared to the file).
     Use an unnamed buffer, like doing:
 	new | set bt=nofile | r # | 0d_ | diffthis | wincmd p | diffthis
+    Also show difference with the file when editing started?  Should show what
+    can be undone. (Tom Popovich)
 7   Add cursor-binding: when moving the cursor in one diff'ed buffer, also
     move it in other diff'ed buffers, so that CTRL-W commands go to the same
     location.
@@ -1575,6 +1642,11 @@ Syntax highlighting:
     re-insert the [] if possible.
 8   Make it possible to use color of text for Visual highlight group (like for
     the Cursor).
+8   It would be useful to make the highlight group name an expression.  Then
+    when there is a match, the expression would be evaluated to find out what
+    highlight group to use.  Could be used to check if the shell used in a
+    password file appears in /etc/shells. (Nikolai Weibull)
+	syn match =s:checkShell(v:match) contained 'pattern'
 8   Make it possible to only highlight a sub-expression of a match.  Like
     using "\1" in a ":s" command.
 8   Support for deleting syntax items:
@@ -3020,8 +3092,6 @@ Options:
 7   There is 'titleold', why is there no 'iconold'? (Chazelas)
 7   Make 'scrolloff' a global-local option, so that it can be different in the
     quickfix window, for example. (Gary Holloway)
-7   Add plugins for formatting.  Should be able to make a choice depending on
-    the language of a file (English/Korean/Japanese/etc.).
 
 
 External commands:
@@ -3349,7 +3419,8 @@ Various improvements:
 7   Add a way to define an item list with a pattern in 'formatoptions'.  The
     'n' flag doesn't work for "6.3" or "6a.".
 8   Add 'formatexpr' option: Used for formatting operator "gq" instead of the
-    builtin formatting or 'formatprg'.
+    builtin formatting or 'formatprg'.  Or use a string that starts with "="
+    in 'formatprg': "=MyFormat()".
 8   Allow using a trailing space to signal a paragraph that continues on the
     next line (MIME text/plain; format=flowed, RFC 2646).  Can be used for
     continuous formatting.  Could use 'autoformat' option, which specifies a
diff --git a/runtime/doc/uganda.txt b/runtime/doc/uganda.txt
index 751c0b454..d126f8b5d 100644
--- a/runtime/doc/uganda.txt
+++ b/runtime/doc/uganda.txt
@@ -1,4 +1,4 @@
-*uganda.txt*    For Vim version 7.0aa.  Last change: 2005 Aug 12
+*uganda.txt*    For Vim version 7.0aa.  Last change: 2005 Oct 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -211,9 +211,26 @@ Sending money:
 Check the ICCF web site for the latest information!  See |iccf| for the URL.
 
 
-USA and Canada: Contact Kibaale Children's Fund (KCF) in Surrey, Canada.  They
+USA:		The methods mentioned below can be used.  Alternatively, you
+		can send a check to the Nehemiah Group Outreach Society
+		(NGOS).  This will reduce banking costs and you can get an IRS
+		tax receipt.  The NGOS forwards the funds directly to the
+		Kibaale project in Uganda.  Checks must be made payable to
+		NGOS but please note on the check "donation Kibaale".  Mail
+		checks to:
+			NGOS
+			P.O. Box 50862
+			Indianapolis, IN 45250
+		Questions regarding the Nehemiah Group Outreach Society (NGOS)
+		should be directed to: Ross deMerchant, Executive Director -
+		r.demerchant AT sbcglobal DOT net.
+		For sponsoring a child contact KCF in Canada (see below) and
+		send the check to NGOS in Indianapolis.
+
+Canada:		Contact Kibaale Children's Fund (KCF) in Surrey, Canada.  They
 		take care of the Canadian sponsors for the children in
-		Kibaale.  You can send them a one time donation directly.
+		Kibaale.  KCF forwards 100% of the money to the project in
+		Uganda.  You can send them a one time donation directly.
 		Please send me a note so that I know what has been donated
 		because of Vim.  Ask KCF for information about sponsorship.
 			Kibaale Children's Fund c/o Pacific Academy
@@ -223,12 +240,10 @@ USA and Canada: Contact Kibaale Children's Fund (KCF) in Surrey, Canada.  They
 			Phone: 604-581-5353
 		If you make a donation to Kibaale Children's Fund (KCF) you
 		will receive a tax receipt which can be submitted with your
-		tax return (under the Free Trade Agreement tax receipts issued
-		by an organization registered in Canada are fully accepted by
-		the IRS in the USA, with a few conditions).
+		tax return.
 
 Holland:	Transfer to the account of "Stichting ICCF Holland" in Venlo.
-		This will allow for tax deduction (if you live in Holland)!
+		This will allow for tax deduction if you live in Holland.
 			Postbank, nr. 4548774
 
 Germany:	It is possible to make donations that allow for a tax return.
@@ -252,7 +267,7 @@ Credit Card:	You can use PayPal to send money with a Credit card.  This is
 		    https://www.paypal.com/affil/pal=Bram%40iccf-holland.org
 		The e-mail address for sending the money to is:
 		    Bram@iccf-holland.org
-		For amounts above 400 Euro ($500) sending a cheque is
+		For amounts above 400 Euro ($500) sending a check is
 		preferred.
 
 Others:		Transfer to one of these accounts if possible:
@@ -264,11 +279,11 @@ Others:		Transfer to one of these accounts if possible:
 		    Rabobank Venlo, account 3765.05.117
 				Swift code: RABO NL 2U
 			under the name "Bram Moolenaar", Venlo
-		Otherwise, send a cheque in euro or US dollars to the address
+		Otherwise, send a check in euro or US dollars to the address
 		below.  Minimal amount: $70 (my bank does not accept smaller
-		amounts for foreign cheques, sorry)
+		amounts for foreign check, sorry)
 
-Address to send cheques to:
+Address to send checks to:
 			stichting ICCF Holland
 			Bram Moolenaar
 			Clematisstraat 30
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index 3f075d86f..b4172ccb1 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 7.0aa.  Last change: 2005 Aug 27
+*various.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -295,7 +295,8 @@ N  *+gettext*		message translations |multi-lang|
    *+GUI_Motif*		Unix only: Motif |GUI|
    *+GUI_Photon*	QNX only:  Photon |GUI|
 m  *+hangul_input*	Hangul input support |hangul|
-   *+iconv*		Compiled with the |iconv()| function, may have |/dyn|
+   *+iconv*		Compiled with the |iconv()| function
+   *+iconv/dyn*		Likewise |iconv-dynamic| |/dyn|
 N  *+insert_expand*	|insert_expand| Insert mode completion
 N  *+jumplist*		|jumplist|
 B  *+keymap*		|'keymap'|
@@ -325,14 +326,17 @@ m  *+ole*		Win32 GUI only: |ole-interface|
    *+osfiletype*	Support for the 'osfiletype' option and filetype
 			checking in automatic commands.  |autocmd-osfiletypes|
 N  *+path_extra*	Up/downwards search in 'path' and 'tags'
-m  *+perl*		Perl interface |perl|, may have |/dyn|
+m  *+perl*		Perl interface |perl|
+m  *+perl/dyn*		Perl interface |perl-dynamic| |/dyn|
    *+postscript*	|:hardcopy| writes a PostScript file
 N  *+printer*		|:hardcopy| command
 H  *+profile*		|:profile| command
-m  *+python*		Python interface |python|, may have |/dyn|
+m  *+python*		Python interface |python|
+m  *+python/dyn*	Python interface |python-dynamic| |/dyn|
 N  *+quickfix*		|:make| and |quickfix| commands
 B  *+rightleft*		Right to left typing |'rightleft'|
-m  *+ruby*		Ruby interface |ruby|, may have |/dyn|
+m  *+ruby*		Ruby interface |ruby|
+m  *+ruby/dyn*		Ruby interface |ruby-dynamic| |/dyn|
 N  *+scrollbind*	|'scrollbind'|
 B  *+signs*		|:sign|
 N  *+smartindent*	|'smartindent'|
@@ -345,7 +349,8 @@ N  *+syntax*		Syntax highlighting |syntax|
 N  *+tag_binary*	binary searching in tags file |tag-binary-search|
 N  *+tag_old_static*	old method for static tags |tag-old-static|
 m  *+tag_any_white*	any white space allowed in tags file |tag-any-white|
-m  *+tcl*		Tcl interface |tcl|, may have |/dyn|
+m  *+tcl*		Tcl interface |tcl|
+m  *+tcl/dyn*		Tcl interface |tcl-dynamic| |/dyn|
    *+terminfo*		uses |terminfo| instead of termcap
 N  *+termresponse*	support for |t_RV| and |v:termresponse|
 N  *+textobjects*	|text-objects| selection
diff --git a/runtime/doc/version6.txt b/runtime/doc/version6.txt
index 3f17ebbc6..7490a4527 100644
--- a/runtime/doc/version6.txt
+++ b/runtime/doc/version6.txt
@@ -1,4 +1,4 @@
-*version6.txt*  For Vim version 7.0aa.  Last change: 2005 Oct 09
+*version6.txt*  For Vim version 7.0aa.  Last change: 2005 Oct 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -13863,16 +13863,36 @@ The big MS-Windows version now uses:
 Changed							*changed-6.4*
 -------
 
-Nothing relevant.
+Removed runtime/tools/tcltags, Exuberant ctags does it better.
 
 
 Added							*added-6.4*
 -----
 
-Netrc syntax file. (Nikolai Weibull)
-Sudoers syntax file. (Nikolai Weibull)
-SMTPrc syntax file. (Kornel Kielczewski)
-Esterel syntax file. (Maurizio Tranchero)
+Alsaconf syntax file (Nikolai Weibull)
+Eruby syntax, indent, compiler and ftplugin file (Doug Kearns)
+Esterel syntax file (Maurizio Tranchero)
+Mathematica indent file (Steve Layland)
+Netrc syntax file (Nikolai Weibull)
+PHP compiler file (Doug Kearns)
+Pascal indent file (Neil Carter)
+Prescribe syntax file (Klaus Muth)
+Rubyunit compiler file (Doug Kearns)
+SMTPrc syntax file (Kornel Kielczewski)
+Sudoers syntax file (Nikolai Weibull)
+TPP syntax file (Gerfried Fuchs)
+VHDL ftplugin file (R. Shankar)
+Verilog-AMS syntax file (S. Myles Prather)
+
+Bulgarian keymap (Alberto Mardegan)
+Canadian keymap (Eric Joanis)
+
+Hungarian menu translations in UTF-8 (Kantra Gergely)
+Ukrainian menu translations (Bohdan Vlasyuk)
+
+Irish message translations (Kevin Patrick Scannell)
+
+Configure also checks for tclsh8.4.
 
 
 Fixed							*fixed-6.4*
@@ -13888,6 +13908,10 @@ GUI has started up.
 Gcc would warn "dereferencing type-punned pointer will break strict -aliasing
 rules".  Avoid using typecasts for variable pointers.
 
+Gcc 3.x interprets the -MM argument differently.  Change "-I /path" to
+"-isystem /path" for "make depend".
+
+
 Patch 6.3.001
 Problem:    ":browse split" gives the file selection dialog twice. (Gordon
 	    Bazeley)  Same problem for ":browse diffpatch".
@@ -14056,7 +14080,7 @@ Files:	    src/os_mswin.c
 
 Patch 6.3.026
 Problem:    When ~/.vim/after/syntax/syncolor.vim contains a command that
-	    reloads the colors an enless loop and/or a crash may occur.
+	    reloads the colors an endless loop and/or a crash may occur.
 Solution:   Only free the old value of an option when it was originally
 	    allocated.  Limit recursiveness of init_highlight() to 5 levels.
 Files:	    src/option.c, src/syntax.c
@@ -14471,5 +14495,36 @@ Problem:    A very big value for 'columns' or 'lines' may cause a crash.
 Solution:   Limit the values to 10000 and 1000.
 Files:	    src/option.c
 
+Patch 6.4a.001
+Problem:    The Unix Makefile contained too many dependencies and a few
+	    uncommented lines.
+Solution:   Run "make depend" with manual changes to avoid a gcc
+	    incompatibility.  Comment a few lines.
+Files:	    src/Makefile
+
+Patch 6.4b.001
+Problem:    Vim reports "Vim 6.4a" in the ":version" output.
+Solution:   Change "a" to "b". (Tony Mechelynck)
+Files:	    src/version.h
+
+Patch 6.4b.002
+Problem:    In Insert mode, pasting a multi-byte character after the end of
+	    the line leaves the cursor just before that character.
+Solution:   Make sure "gP" leaves the cursor in the right place when
+	    'virtualedit' is set.
+Files:	    src/ops.c
+
+Patch 6.4b.003 (after 6.4b.002)
+Problem:    The problem still exists when 'encoding' is set to "cp936".
+Solution:   Fix the problem in getvvcol(), compute the coladd field correctly.
+Files:	    src/charset.c, src/ops.c
+
+Patch 6.4b.004
+Problem:    Selecting a {} block with "viB" includes the '}' when there is an
+	    empty line before it.
+Solution:   Don't advance the cursor to include a line break when it's already
+	    at the line break.
+Files:	    src/search.c
+
 
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/version7.txt b/runtime/doc/version7.txt
index a7f120189..65ecbc853 100644
--- a/runtime/doc/version7.txt
+++ b/runtime/doc/version7.txt
@@ -1,4 +1,4 @@
-*version7.txt*  For Vim version 7.0aa.  Last change: 2005 Oct 11
+*version7.txt*  For Vim version 7.0aa.  Last change: 2005 Nov 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -429,7 +429,7 @@ Win32: The ":winpos" command now also works in the console. (Vipin Aravind)
 			Lakshmanan).
 
 
-New functions: ~
+New and extended functions: ~
 
 |add()|			append an item to a List
 |append()|		append List of lines to the buffer
@@ -570,7 +570,7 @@ character selections can be used between two Vims. (Eckehard Berns)
 Also fixes the problem that setting 'clipboard' to "unnamed" breaks using
 "yyp".
 
-Mac: GUI font selector. (Peter "Rain Dog" Cucka)
+Mac: GUI font selector. (Peter Cucka)
 
 Mac: support for multi-byte characters. (Da Woon Jung)
 
@@ -619,6 +619,9 @@ IMPROVEMENTS						*improvements-7*
 
 Move the help for printing to a separate help file.  It's quite a lot now.
 
+When ":silent" is used and a backwards range is given for an Ex command the
+range is swapped automatically instead of asking if that is OK.
+
 The pattern matching code was changed from a recursive function to an
 iterative mechanism.  This avoids out-of-stack errors.  State is stored in
 allocated memory, running out of memory can always be detected.  Allows
@@ -636,7 +639,7 @@ it. (Johannes Zellner)
 Added "nbsp" in 'listchars'. (David Blanchet)
 
 Added the "acwrite" value for the 'buftype' option.  This is for a buffer that
-doesn not have a name that refers to a file and is written with BufWriteCmd
+does not have a name that refers to a file and is written with BufWriteCmd
 autocommands.
 
 For lisp indenting and matching parenthesis: (Sergey Khorev)
@@ -816,7 +819,7 @@ For command-line completion the matches for various types of arguments are now
 sorted: user commands, variables, syntax names, etc.
 
 When no locale is set, thus using the "C" locale, Vim will work with latin1
-characters, using it's own isupper()/toupper()/etc. functions.
+characters, using its own isupper()/toupper()/etc. functions.
 
 When using an rxvt terminal emulator guess the value of 'background' using the
 COLORFGBG environment variable. (Ciaran McCreesh)
@@ -1395,4 +1398,13 @@ Limit the values of 'columns' and 'lines' to avoid an overflow in Rows *
 Columns.  Fixed bad effects when running out of memory (command line would be
 reversed, ":qa!" resulted in ":!aq").
 
+Motif: "gvim -iconic" opened the window anyway.  (David Harrison)
+
+There is a tiny chance that a symlink gets created between checking for an
+existing file and creating a file.  Use the O_NOFOLLOW for open() if it's
+available.
+
+In an empty line "ix<CTRL-O>0" moved the cursor to after the line instead of
+sticking to the first column.
+
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/zip.txt b/runtime/doc/zip.txt
index aa95460af..3ca368328 100644
--- a/runtime/doc/zip.txt
+++ b/runtime/doc/zip.txt
@@ -1,4 +1,4 @@
-*zip.txt*	Zip File Interface				Sep 16, 2005
+*zip.txt*	Zip File Interface				Nov 03, 2005
 
 Author:  Charles E. Campbell, Jr.  <NdrOchip@ScampbellPfamily.AbizM>
 	  (remove NOSPAM from Campbell's email first)
@@ -20,12 +20,21 @@ Copyright:    Copyright (C) 2005 Charles E. Campbell, Jr. {{{1 *zip-copyright*
 ==============================================================================
 2. Usage					*zip-usage* *zip-manual*
 
+   When one edits a *.zip file, this plugin will handle displaying a
+   contents page.  Select a file to edit by moving the cursor atop
+   the desired file, then hit the <return> key.  After editing, one may
+   also write to the file.  Currently, one may not make a new file in
+   zip archives via the plugin.
+
 ==============================================================================
 3. History					*zip-history*
+   v3 Oct 18, 2005 * <amatch> used instead of <afile> in autocmds
    v2 Sep 16, 2005 * silenced some commands (avoiding hit-enter prompt)
                    * began testing under Windows; works thus far
 		   * filetype detection fixed
-   v1 Sep 15, 2005 * Initial release, had browsin, reading, and writing
+      Nov 03, 2005 * handles writing zipfiles across a network using
+                     netrw#NetWrite()
+   v1 Sep 15, 2005 * Initial release, had browsing, reading, and writing
 
 ==============================================================================
 vim:tw=78:ts=8:ft=help