1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
/*
* (C) 2015 Hans de Goede <hdegoede@redhat.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Support for the ANX9804 bridge chip, which can take pixel data coming
* from a parallel LCD interface and translate it on the flight into a DP
* interface for driving eDP TFT displays.
*/
#include <common.h>
#include <i2c.h>
#include "anx98xx-edp.h"
#include "anx9804.h"
/**
* anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
*
* This function will init an anx9804 parallel lcd to dp bridge chip
* using the passed in parameters.
*
* @i2c_bus: Number of the i2c bus to which the anx9804 is connected.
* @lanes: Number of displayport lanes to use
* @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
* @bpp: Bits per pixel, must be 18 or 24
*/
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
{
unsigned int orig_i2c_bus = i2c_get_bus_num();
u8 c, colordepth;
int i;
i2c_set_bus_num(i2c_bus);
if (bpp == 18)
colordepth = 0x00; /* 6 bit */
else
colordepth = 0x10; /* 8 bit */
/* Reset */
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
mdelay(100);
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);
/* Write 0 to the powerdown reg (powerup everything) */
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);
c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
if (c != 0x98) {
printf("Error anx9804 chipid mismatch\n");
i2c_set_bus_num(orig_i2c_bus);
return;
}
for (i = 0; i < 100; i++) {
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
break;
mdelay(5);
}
if (i == 100)
printf("Error anx9804 clock is not stable\n");
i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
/* Set a bunch of analog related register values */
i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);
/* Force HPD */
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
/* Power up and configure lanes */
i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
/* Reset AUX CH */
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE);
/* Powerdown audio and some other unused bits */
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
i2c_reg_write(0x38, 0xa7, 0x00);
/* Set data-rate / lanes */
i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
/* Link training */
i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
ANX9804_LINK_TRAINING_CTRL_EN);
mdelay(5);
for (i = 0; i < 100; i++) {
c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
if ((c & 0x01) == 0)
break;
mdelay(5);
}
if(i == 100) {
printf("Error anx9804 link training timeout\n");
i2c_set_bus_num(orig_i2c_bus);
return;
}
/* Enable */
i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
/* Force stream valid */
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
i2c_set_bus_num(orig_i2c_bus);
}
|
