1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2016 Freescale Semiconductor
*
* Freescale LS1046ARDB board-specific CPLD controlling supports.
*/
#include <common.h>
#include <command.h>
#include <asm/io.h>
#include "cpld.h"
u8 cpld_read(unsigned int reg)
{
void *p = (void *)CONFIG_SYS_CPLD_BASE;
return in_8(p + reg);
}
void cpld_write(unsigned int reg, u8 value)
{
void *p = (void *)CONFIG_SYS_CPLD_BASE;
out_8(p + reg, value);
}
/* Set the boot bank to the alternate bank */
void cpld_set_altbank(void)
{
u16 reg = CPLD_CFG_RCW_SRC_QSPI;
u8 reg4 = CPLD_READ(soft_mux_on);
u8 reg5 = (u8)(reg >> 1);
u8 reg6 = (u8)(reg & 1);
u8 reg7 = CPLD_READ(vbank);
cpld_rev_bit(®5);
CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
CPLD_WRITE(cfg_rcw_src1, reg5);
CPLD_WRITE(cfg_rcw_src2, reg6);
reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
CPLD_WRITE(vbank, reg7);
CPLD_WRITE(system_rst, 1);
}
/* Set the boot bank to the default bank */
void cpld_set_defbank(void)
{
u16 reg = CPLD_CFG_RCW_SRC_QSPI;
u8 reg4 = CPLD_READ(soft_mux_on);
u8 reg5 = (u8)(reg >> 1);
u8 reg6 = (u8)(reg & 1);
cpld_rev_bit(®5);
CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
CPLD_WRITE(cfg_rcw_src1, reg5);
CPLD_WRITE(cfg_rcw_src2, reg6);
CPLD_WRITE(vbank, 0);
CPLD_WRITE(system_rst, 1);
}
void cpld_set_sd(void)
{
u16 reg = CPLD_CFG_RCW_SRC_SD;
u8 reg5 = (u8)(reg >> 1);
u8 reg6 = (u8)(reg & 1);
cpld_rev_bit(®5);
CPLD_WRITE(soft_mux_on, 1);
CPLD_WRITE(cfg_rcw_src1, reg5);
CPLD_WRITE(cfg_rcw_src2, reg6);
CPLD_WRITE(system_rst, 1);
}
void cpld_select_core_volt(bool en_0v9)
{
u8 reg17 = en_0v9;
CPLD_WRITE(vdd_en, 1);
CPLD_WRITE(vdd_sel, reg17);
}
#ifdef DEBUG
static void cpld_dump_regs(void)
{
printf("cpld_ver = %x\n", CPLD_READ(cpld_ver));
printf("cpld_ver_sub = %x\n", CPLD_READ(cpld_ver_sub));
printf("pcba_ver = %x\n", CPLD_READ(pcba_ver));
printf("soft_mux_on = %x\n", CPLD_READ(soft_mux_on));
printf("cfg_rcw_src1 = %x\n", CPLD_READ(cfg_rcw_src1));
printf("cfg_rcw_src2 = %x\n", CPLD_READ(cfg_rcw_src2));
printf("vbank = %x\n", CPLD_READ(vbank));
printf("sysclk_sel = %x\n", CPLD_READ(sysclk_sel));
printf("uart_sel = %x\n", CPLD_READ(uart_sel));
printf("sd1refclk_sel = %x\n", CPLD_READ(sd1refclk_sel));
printf("rgmii_1588_sel = %x\n", CPLD_READ(rgmii_1588_sel));
printf("1588_clk_sel = %x\n", CPLD_READ(reg_1588_clk_sel));
printf("status_led = %x\n", CPLD_READ(status_led));
printf("sd_emmc = %x\n", CPLD_READ(sd_emmc));
printf("vdd_en = %x\n", CPLD_READ(vdd_en));
printf("vdd_sel = %x\n", CPLD_READ(vdd_sel));
putc('\n');
}
#endif
void cpld_rev_bit(unsigned char *value)
{
u8 rev_val, val;
int i;
val = *value;
rev_val = val & 1;
for (i = 1; i <= 7; i++) {
val >>= 1;
rev_val <<= 1;
rev_val |= val & 1;
}
*value = rev_val;
}
int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rc = 0;
if (argc <= 1)
return cmd_usage(cmdtp);
if (strcmp(argv[1], "reset") == 0) {
if (strcmp(argv[2], "altbank") == 0)
cpld_set_altbank();
else if (strcmp(argv[2], "sd") == 0)
cpld_set_sd();
else
cpld_set_defbank();
#ifdef DEBUG
} else if (strcmp(argv[1], "dump") == 0) {
cpld_dump_regs();
#endif
} else {
rc = cmd_usage(cmdtp);
}
return rc;
}
U_BOOT_CMD(
cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
"Reset the board or alternate bank",
"reset: reset to default bank\n"
"cpld reset altbank: reset to alternate bank\n"
"cpld reset sd: reset to boot from SD card\n"
#ifdef DEBUG
"cpld dump - display the CPLD registers\n"
#endif
);
|
