1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Ethernet specific code for CompuLab CL-SOM-AM57x module
*
* (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
*
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
*/
#include <common.h>
#include <cpsw.h>
#include <environment.h>
#include <miiphy.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include "../common/eeprom.h"
static void cpsw_control(int enabled)
{
/* VTP can be added here */
}
static struct cpsw_slave_data cl_som_am57x_cpsw_slaves[] = {
{
.slave_reg_ofs = 0x208,
.sliver_reg_ofs = 0xd80,
.phy_addr = 0,
.phy_if = PHY_INTERFACE_MODE_RMII,
},
{
.slave_reg_ofs = 0x308,
.sliver_reg_ofs = 0xdc0,
.phy_addr = 1,
.phy_if = PHY_INTERFACE_MODE_RMII,
},
};
static struct cpsw_platform_data cl_som_am57_cpsw_data = {
.mdio_base = CPSW_MDIO_BASE,
.cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
.slaves = 2,
.slave_data = cl_som_am57x_cpsw_slaves,
.ale_reg_ofs = 0xd00,
.ale_entries = 1024,
.host_port_reg_ofs = 0x108,
.hw_stats_reg_ofs = 0x900,
.bd_ram_ofs = 0x2000,
.mac_control = (1 << 5),
.control = cpsw_control,
.host_port_num = 0,
.version = CPSW_CTRL_VERSION_2,
};
/*
* cl_som_am57x_efuse_read_mac_addr() - read Ethernet port MAC address.
* The information is retrieved from the SOC's registers.
* @buff: read buffer.
* @port_num: port number.
*/
static void cl_som_am57x_efuse_read_mac_addr(uchar *buff, uint port_num)
{
uint32_t mac_hi, mac_lo;
if (port_num) {
mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
} else {
mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
}
buff[0] = (mac_hi & 0xFF0000) >> 16;
buff[1] = (mac_hi & 0xFF00) >> 8;
buff[2] = mac_hi & 0xFF;
buff[3] = (mac_lo & 0xFF0000) >> 16;
buff[4] = (mac_lo & 0xFF00) >> 8;
buff[5] = mac_lo & 0xFF;
}
/*
* cl_som_am57x_handle_mac_address() - set MAC address in the U-Boot
* environment.
* The address is retrieved retrieved from an EEPROM field or from the
* SOC's registers.
* @env_name: U-Boot environment name.
* @field_name: EEPROM field name.
* @port_num: SOC's port number.
*/
static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num)
{
int ret;
uint8_t enetaddr[6];
ret = eth_env_get_enetaddr(env_name, enetaddr);
if (ret)
return 0;
ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (ret || !is_valid_ethaddr(enetaddr))
cl_som_am57x_efuse_read_mac_addr(enetaddr, port_num);
if (!is_valid_ethaddr(enetaddr))
return -1;
ret = eth_env_set_enetaddr(env_name, enetaddr);
if (ret)
printf("cl-som-am57x: Failed to set Eth port %d MAC address\n",
port_num);
return ret;
}
#define CL_SOM_AM57X_PHY_ADDR2 0x01
#define AR8033_PHY_DEBUG_ADDR_REG 0x1d
#define AR8033_PHY_DEBUG_DATA_REG 0x1e
#define AR8033_DEBUG_RGMII_RX_CLK_DLY_REG 0x00
#define AR8033_DEBUG_RGMII_TX_CLK_DLY_REG 0x05
#define AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK (1 << 15)
#define AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK (1 << 8)
/*
* cl_som_am57x_rgmii_clk_delay() - Set RGMII clock delay.
* Enable RX delay, disable TX delay.
*/
static void cl_som_am57x_rgmii_clk_delay(void)
{
uint16_t mii_reg_val;
const char *devname;
devname = miiphy_get_current_dev();
/* PHY 2 */
miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG,
AR8033_DEBUG_RGMII_RX_CLK_DLY_REG);
miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
&mii_reg_val);
mii_reg_val |= AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK;
miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
mii_reg_val);
miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG,
AR8033_DEBUG_RGMII_TX_CLK_DLY_REG);
miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
&mii_reg_val);
mii_reg_val &= ~AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK;
miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
mii_reg_val);
}
#define CL_SOM_AM57X_GPIO_PHY1_RST 92 /* GPIO3_28 */
#define CL_SOM_AM57X_RGMII_PORT1 1
int board_eth_init(bd_t *bis)
{
int ret;
uint32_t ctrl_val;
char *cpsw_phy_envval;
int cpsw_act_phy = 1;
/* SB-SOM-AM57x primary Eth (P21) is routed to RGMII1 */
ret = cl_som_am57x_handle_mac_address("ethaddr",
CL_SOM_AM57X_RGMII_PORT1);
if (ret)
return -1;
/* Select RGMII for GMII1_SEL */
ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
ctrl_val |= 0x22;
writel(ctrl_val, (*ctrl)->control_core_control_io1);
mdelay(10);
gpio_request(CL_SOM_AM57X_GPIO_PHY1_RST, "phy1_rst");
gpio_direction_output(CL_SOM_AM57X_GPIO_PHY1_RST, 0);
mdelay(20);
gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1);
mdelay(20);
cpsw_phy_envval = env_get("cpsw_phy");
if (cpsw_phy_envval != NULL)
cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0);
cl_som_am57_cpsw_data.active_slave = cpsw_act_phy;
ret = cpsw_register(&cl_som_am57_cpsw_data);
if (ret < 0)
printf("Error %d registering CPSW switch\n", ret);
/* Set RGMII clock delay */
cl_som_am57x_rgmii_clk_delay();
return ret;
}
|
