1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
/*
* On-chip UART initializaion for low-level debugging
*
* Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/serial_reg.h>
#include <linux/linkage.h>
#include <mach/bcu-regs.h>
#include <mach/sc-regs.h>
#include <mach/sg-regs.h>
#if !defined(CONFIG_DEBUG_SEMIHOSTING)
#include CONFIG_DEBUG_LL_INCLUDE
#endif
#define BAUDRATE 115200
#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d))
ENTRY(debug_ll_init)
ldr r0, =SG_REVISION
ldr r1, [r0]
and r1, r1, #SG_REVISION_TYPE_MASK
mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
#define PH1_SLD3_UART_CLK 36864000
cmp r1, #0x25
bne ph1_sld3_end
sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0
ldr r0, =BCSCR5
ldr r1, =0x24440000
str r1, [r0]
ldr r0, =SC_CLKCTRL
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
ldr r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE)
b init_uart
ph1_sld3_end:
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
#define PH1_LD4_UART_CLK 36864000
cmp r1, #0x26
bne ph1_ld4_end
ldr r0, =SG_IECTRL
ldr r1, [r0]
orr r1, r1, #1
str r1, [r0]
sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0
ldr r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE)
b init_uart
ph1_ld4_end:
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
#define PH1_PRO4_UART_CLK 73728000
cmp r1, #0x28
bne ph1_pro4_end
sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
ldr r0, =SG_LOADPINCTRL
mov r1, #1
str r1, [r0]
ldr r0, =SC_CLKCTRL
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
ldr r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE)
b init_uart
ph1_pro4_end:
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
#define PH1_SLD8_UART_CLK 80000000
cmp r1, #0x29
bne ph1_sld8_end
ldr r0, =SG_IECTRL
ldr r1, [r0]
orr r1, r1, #1
str r1, [r0]
sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0
ldr r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE)
b init_uart
ph1_sld8_end:
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
#define PH1_PRO5_UART_CLK 73728000
cmp r1, #0x2A
bne ph1_pro5_end
sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1
sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2
sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3
ldr r0, =SG_LOADPINCTRL
mov r1, #1
str r1, [r0]
ldr r0, =SC_CLKCTRL
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE)
b init_uart
ph1_pro5_end:
#endif
init_uart:
addruart r0, r1, r2
mov r1, #UART_LCR_WLEN8 << 8
str r1, [r0, #0x10]
str r3, [r0, #0x24]
mov pc, lr
ENDPROC(debug_ll_init)
|
