1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/armv7.h>
#include <asm/pl310.h>
#include <asm/io.h>
#include <asm/mach-imx/sys_proto.h>
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
enum dcache_option option = DCACHE_WRITETHROUGH;
#else
enum dcache_option option = DCACHE_WRITEBACK;
#endif
/* Avoid random hang when download by usb */
invalidate_dcache_all();
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
/* Enable caching on OCRAM and ROM */
mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
ROMCP_ARB_END_ADDR,
option);
mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
IRAM_SIZE,
option);
}
#endif
#ifndef CONFIG_SYS_L2CACHE_OFF
#ifdef CONFIG_SYS_L2_PL310
#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
void v7_outer_cache_enable(void)
{
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
unsigned int val;
/*
* Must disable the L2 before changing the latency parameters
* and auxiliary control register.
*/
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
/*
* Set bit 22 in the auxiliary control register. If this bit
* is cleared, PL310 treats Normal Shared Non-cacheable
* accesses as Cacheable no-allocate.
*/
setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
if (is_mx6sl() || is_mx6sll()) {
val = readl(&iomux->gpr[11]);
if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
/* L2 cache configured as OCRAM, reset it */
val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
writel(val, &iomux->gpr[11]);
}
}
writel(0x132, &pl310->pl310_tag_latency_ctrl);
writel(0x132, &pl310->pl310_data_latency_ctrl);
val = readl(&pl310->pl310_prefetch_ctrl);
/* Turn on the L2 I/D prefetch */
val |= 0x30000000;
/*
* The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
* The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
* But according to ARM PL310 errata: 752271
* ID: 752271: Double linefill feature can cause data corruption
* Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
* Workaround: The only workaround to this erratum is to disable the
* double linefill feature. This is the default behavior.
*/
#ifndef CONFIG_MX6Q
val |= 0x40800000;
#endif
writel(val, &pl310->pl310_prefetch_ctrl);
val = readl(&pl310->pl310_power_ctrl);
val |= L2X0_DYNAMIC_CLK_GATING_EN;
val |= L2X0_STNDBY_MODE_EN;
writel(val, &pl310->pl310_power_ctrl);
setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
void v7_outer_cache_disable(void)
{
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
#endif /* !CONFIG_SYS_L2_PL310 */
#endif /* !CONFIG_SYS_L2CACHE_OFF */
|
