summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
blob: cfad206eddbf7f24f9907f02939ad68f14d0ea1d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
/*
 * Low-level initialization for EP93xx
 *
 * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
 * Copyright (C) 2013
 * Sergey Kostanabev <sergey.kostanbaev <at> fairwaves.ru>
 *
 * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
 * Copyright (C) 2006 Cirrus Logic Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <config.h>
#include <asm/arch-ep93xx/ep93xx.h>

/*
/* Configure the SDRAM based on the supplied settings.
 *
 * Input:	r0 - SDRAM DEVCFG register
 *		r2 - configuration for SDRAM chips
 * Output:	none
 * Modifies:	r3, r4
 */
ep93xx_sdram_config:
	/* Program the SDRAM device configuration register. */
	ldr	r3, =SDRAM_BASE
#ifdef CONFIG_EDB93XX_SDCS0
	str	r0, [r3, #SDRAM_OFF_DEVCFG0]
#endif
#ifdef CONFIG_EDB93XX_SDCS1
	str	r0, [r3, #SDRAM_OFF_DEVCFG1]
#endif
#ifdef CONFIG_EDB93XX_SDCS2
	str	r0, [r3, #SDRAM_OFF_DEVCFG2]
#endif
#ifdef CONFIG_EDB93XX_SDCS3
	str	r0, [r3, #SDRAM_OFF_DEVCFG3]
#endif

	/* Set the Initialize and MRS bits (issue continuous NOP commands
	 * (INIT & MRS set))
	 */
	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
			EP93XX_SDRAMCTRL_GLOBALCFG_MRS | \
			EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
	str	r4, [r3, #SDRAM_OFF_GLCONFIG]

	/* Delay for 200us. */
	mov	r4, #0x3000
delay1:
	subs	r4, r4, #1
	bne	delay1

	/* Clear the MRS bit to issue a precharge all. */
	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
			EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
	str	r4, [r3, #SDRAM_OFF_GLCONFIG]

	/* Temporarily set the refresh timer to 0x10. Make it really low so
	 * that refresh cycles are generated.
	 */
	ldr	r4, =0x10
	str	r4, [r3, #SDRAM_OFF_REFRSHTIMR]

	/* Delay for at least 80 SDRAM clock cycles. */
	mov	r4, #80
delay2:
	subs	r4, r4, #1
	bne	delay2

	/* Set the refresh timer to the fastest required for any device
	 * that might be used. Set 9.6 ms refresh time.
	 */
	ldr	r4, =0x01e0
	str	r4, [r3, #SDRAM_OFF_REFRSHTIMR]

	/* Select mode register update mode. */
	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_CKE | \
			EP93XX_SDRAMCTRL_GLOBALCFG_MRS)
	str	r4, [r3, #SDRAM_OFF_GLCONFIG]

	/* Program the mode register on the SDRAM by performing fake read */
	ldr	r4, [r2]

	/* Select normal operating mode. */
	ldr	r4, =EP93XX_SDRAMCTRL_GLOBALCFG_CKE
	str	r4, [r3, #SDRAM_OFF_GLCONFIG]

	/* Return to the caller. */
	mov	pc, lr

/*
 * Test to see if the SDRAM has been configured in a usable mode.
 *
 * Input:	r0 - Test address of SDRAM
 * Output:	r0 - 0 -- Test OK, -1 -- Failed
 * Modifies:	r0-r5
 */
ep93xx_sdram_test:
	/* Load the test patterns to be written to SDRAM. */
	ldr	r1, =0xf00dface
	ldr	r2, =0xdeadbeef
	ldr	r3, =0x08675309
	ldr	r4, =0xdeafc0ed

	/* Store the test patterns to SDRAM. */
	stmia	r0, {r1-r4}

	/* Load the test patterns from SDRAM one at a time and compare them
	 * to the actual pattern.
	 */
	ldr	r5, [r0]
	cmp	r5, r1
	ldreq	r5, [r0, #0x0004]
	cmpeq	r5, r2
	ldreq	r5, [r0, #0x0008]
	cmpeq	r5, r3
	ldreq	r5, [r0, #0x000c]
	cmpeq	r5, r4

	/* Return -1 if a mismatch was encountered, 0 otherwise. */
	mvnne	r0, #0xffffffff
	moveq	r0, #0x00000000

	/* Return to the caller. */
	mov	pc, lr

/*
 * Determine the size of the SDRAM. Use data=address for the scan.
 *
 * Input:	r0 - Start SDRAM address
 * Return:	r0 - Single block size
 *		r1 - Valid block mask
 *		r2 - Total block count
 * Modifies:	r0-r5
 */
ep93xx_sdram_size:
	/* Store zero at offset zero. */
	str	r0, [r0]

	/* Start checking for an alias at 1MB into SDRAM. */
	ldr	r1, =0x00100000

	/* Store the offset at the current offset. */
check_block_size:
	str	r1, [r0, r1]

	/* Read back from zero. */
	ldr	r2, [r0]

	/* Stop searching of an alias was found. */
	cmp	r1, r2
	beq	found_block_size

	/* Advance to the next power of two boundary. */
	mov	r1, r1, lsl #1

	/* Loop back if the size has not reached 256MB. */
	cmp	r1, #0x10000000
	bne	check_block_size

	/* A full 256MB of memory was found, so return it now. */
	ldr	r0, =0x10000000
	ldr	r1, =0x00000000
	ldr	r2, =0x00000001
	mov	pc, lr

	/* An alias was found. See if the first block is 128MB in size. */
found_block_size:
	cmp	r1, #0x08000000

	/* The first block is 128MB, so there is no further memory. Return it
	 * now.
	 */
	ldreq	r0, =0x08000000
	ldreq	r1, =0x00000000
	ldreq	r2, =0x00000001
	moveq	pc, lr

	/* Save the block size, set the block address bits to zero, and
	 * initialize the block count to one.
	 */
	mov	r3, r1
	ldr	r4, =0x00000000
	ldr	r5, =0x00000001

	/* Look for additional blocks of memory by searching for non-aliases. */
find_blocks:
	/* Store zero back to address zero. It may be overwritten. */
	str	r0, [r0]

	/* Advance to the next power of two boundary. */
	mov	r1, r1, lsl #1

	/* Store the offset at the current offset. */
	str	r1, [r0, r1]

	/* Read back from zero. */
	ldr	r2, [r0]

	/* See if a non-alias was found. */
	cmp	r1, r2

	/* If a non-alias was found, then or in the block address bit and
	 * multiply the block count by two (since there are two unique
	 * blocks, one with this bit zero and one with it one).
	 */
	orrne	r4, r4, r1
	movne	r5, r5, lsl #1

	/* Continue searching if there are more address bits to check. */
	cmp	r1, #0x08000000
	bne	find_blocks

	/* Return the block size, address mask, and count. */
	mov	r0, r3
	mov	r1, r4
	mov	r2, r5

	/* Return to the caller. */
	mov	pc, lr


.globl lowlevel_init
lowlevel_init:

	mov	r6, lr

	/* Make sure caches are off and invalidated. */
	ldr	r0, =0x00000000
	mcr	p15, 0, r0, c1, c0, 0
	nop
	nop
	nop
	nop
	nop

	/* Turn off the green LED and turn on the red LED. If the red LED
	 * is left on for too long, the external reset circuit described
	 * by application note AN258 will cause the system to reset.
	 */
	ldr	r1, =EP93XX_LED_DATA
	ldr	r0, [r1]
	bic	r0, r0, #EP93XX_LED_GREEN_ON
	orr	r0, r0, #EP93XX_LED_RED_ON
	str	r0, [r1]

	/* Undo the silly static memory controller programming performed
	 * by the boot rom.
	 */
	ldr	r0, =SMC_BASE

	/* Set WST1 and WST2 to 31 HCLK cycles (slowest access) */
	ldr	r1, =0x0000fbe0

	/* Reset EP93XX_OFF_SMCBCR0 */
	ldr	r2, [r0]
	orr	r2, r2, r1
	str	r2, [r0]

	ldr	r2, [r0, #EP93XX_OFF_SMCBCR1]
	orr	r2, r2, r1
	str	r2, [r0, #EP93XX_OFF_SMCBCR1]

	ldr	r2, [r0, #EP93XX_OFF_SMCBCR2]
	orr	r2, r2, r1
	str	r2, [r0, #EP93XX_OFF_SMCBCR2]

	ldr	r2, [r0, #EP93XX_OFF_SMCBCR3]
	orr	r2, r2, r1
	str	r2, [r0, #EP93XX_OFF_SMCBCR3]

	ldr	r2, [r0, #EP93XX_OFF_SMCBCR6]
	orr	r2, r2, r1
	str	r2, [r0, #EP93XX_OFF_SMCBCR6]

	ldr	r2, [r0, #EP93XX_OFF_SMCBCR7]
	orr	r2, r2, r1
	str	r2, [r0, #EP93XX_OFF_SMCBCR7]

	/* Set the PLL1 and processor clock. */
	ldr	r0, =SYSCON_BASE
#ifdef CONFIG_EDB9301
	/* 332MHz, giving a 166MHz processor clock. */
	ldr	r1, = 0x02b49907
#else

#ifdef CONFIG_EDB93XX_INDUSTRIAL
	/* 384MHz, giving a 196MHz processor clock. */
	ldr	r1, =0x02a4bb38
#else
	/* 400MHz, giving a 200MHz processor clock. */
	ldr	r1, =0x02a4e39e
#endif
#endif
	str	r1, [r0, #SYSCON_OFF_CLKSET1]

	nop
	nop
	nop
	nop
	nop

	/* Need to make sure that SDRAM is configured correctly before
	 * coping the code into it.
	 */

#ifdef CONFIG_EDB93XX_SDCS0
	mov	r11, #SDRAM_DEVCFG0_BASE
#endif
#ifdef CONFIG_EDB93XX_SDCS1
	mov	r11, #SDRAM_DEVCFG1_BASE
#endif
#ifdef CONFIG_EDB93XX_SDCS2
	mov	r11, #SDRAM_DEVCFG2_BASE
#endif
#ifdef CONFIG_EDB93XX_SDCS3
	ldr	r0, =SYSCON_BASE
	ldr	r0, [r0, #SYSCON_OFF_SYSCFG]
	ands	r0, r0, #SYSCON_SYSCFG_LASDO
	moveq	r11, #SDRAM_DEVCFG3_ASD0_BASE
	movne	r11, #SDRAM_DEVCFG3_ASD1_BASE
#endif
	/* See Table 13-5 in EP93xx datasheet for more info about DRAM
	 * register mapping */

	/* Try a 32-bit wide configuration of SDRAM. */
	ldr	r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
			EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
			EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
			EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2)

	/* Set burst count: 4 and CAS: 2
	 * Burst mode [A11:A10]; CAS [A16:A14]
	 */
	orr	r2, r11, #0x00008800
	bl	ep93xx_sdram_config

	/* Test the SDRAM. */
	mov	r0, r11
	bl	ep93xx_sdram_test
	cmp	r0, #0x00000000
	beq	ep93xx_sdram_done

	/* Try a 16-bit wide configuration of SDRAM. */
	ldr	r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
			EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
			EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
			EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 | \
			EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH)

	/* Set burst count: 8, CAS: 2, sequential burst
	 * Accoring to Table 13-3 for 16bit operations mapping must be shifted.
	 * Burst mode [A10:A9]; CAS [A15:A13]
	 */
	orr	r2, r11, #0x00004600
	bl	ep93xx_sdram_config

	/* Test the SDRAM. */
	mov	r0, r11
	bl	ep93xx_sdram_test
	cmp	r0, #0x00000000
	beq	ep93xx_sdram_done

	/* Turn off the red LED. */
	ldr	r0, =EP93XX_LED_DATA
	ldr	r1, [r0]
	bic	r1, r1, #EP93XX_LED_RED_ON
	str	r1, [r0]

	/* There is no SDRAM so flash the green LED. */
flash_green:
	orr	r1, r1, #EP93XX_LED_GREEN_ON
	str	r1, [r0]
	ldr	r2, =0x00010000
flash_green_delay_1:
	subs	r2, r2, #1
	bne	flash_green_delay_1
	bic	r1, r1, #EP93XX_LED_GREEN_ON
	str	r1, [r0]
	ldr	r2, =0x00010000
flash_green_delay_2:
	subs	r2, r2, #1
	bne	flash_green_delay_2
	orr	r1, r1, #EP93XX_LED_GREEN_ON
	str	r1, [r0]
	ldr	r2, =0x00010000
flash_green_delay_3:
	subs	r2, r2, #1
	bne	flash_green_delay_3
	bic	r1, r1, #EP93XX_LED_GREEN_ON
	str	r1, [r0]
	ldr	r2, =0x00050000
flash_green_delay_4:
	subs	r2, r2, #1
	bne	flash_green_delay_4
	b	flash_green


ep93xx_sdram_done:
	ldr	r1, =EP93XX_LED_DATA
	ldr	r0, [r1]
	bic	r0, r0, #EP93XX_LED_RED_ON
	str	r0, [r1]

	/* Determine the size of the SDRAM. */
	mov	r0, r11
	bl	ep93xx_sdram_size

	/* Save the SDRAM characteristics. */
	mov	r8, r0
	mov	r9, r1
	mov	r10, r2

	/* Compute total memory size into r1 */
	mul	r1, r8, r10
#ifdef CONFIG_EDB93XX_SDCS0
	ldr	r2, [r0, #SDRAM_OFF_DEVCFG0]
#endif
#ifdef CONFIG_EDB93XX_SDCS1
	ldr	r2, [r0, #SDRAM_OFF_DEVCFG1]
#endif
#ifdef CONFIG_EDB93XX_SDCS2
	ldr	r2, [r0, #SDRAM_OFF_DEVCFG2]
#endif
#ifdef CONFIG_EDB93XX_SDCS3
	ldr	r2, [r0, #SDRAM_OFF_DEVCFG3]
#endif

	/* Consider small DRAM size as:
	 * < 32Mb for 32bit bus
	 * < 64Mb for 16bit bus
	 */
	tst	r2, #EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH
	moveq	r1, r1, lsr #1
	cmp	r1, #0x02000000

#if defined(CONFIG_EDB9301)
	/* Set refresh counter to 20ms for small DRAM size, otherwise 9.6ms */
	movlt	r1, #0x03f0
	movge	r1, #0x01e0
#else
	/* Set refresh counter to 30.7ms for small DRAM size, otherwise 15ms */
	movlt	r1, #0x0600
	movge	r1, #0x2f0
#endif
	str	r1, [r0, #SDRAM_OFF_REFRSHTIMR]

	/* Save the memory configuration information. */
	orr	r0, r11, #UBOOT_MEMORYCNF_BANK_SIZE
	stmia	r0, {r8-r11}

	mov	lr, r6
	mov	pc, lr