summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* ARM: ts4600: add basic board supportSebastien Bourdelin2016-11-291-0/+70
| | | | | | | | This commit adds basic support including: MMC, Serial console Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivatedSven Ebenfeld2016-11-291-0/+2
| | | | | | | | | | | | | When I tried to deactivate VIDEO support for the Wandboard, it still tried to initialize the Framebuffer and so on. That is the reason for the added ifdefs. CONFIG_VIDEO is enabled in the configuration as default and therefore nothing changes for the default user. The structs mx6dl_i2c2_pad_info and mx6q_i2c2_pad_info are only available when CONFIG_IPUV3 are set and should not be tried to access, when that define is not defined. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-11-29113-267/+875
|\ | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * spl: dfu: move DFU Kconfig to SPL KconfigStefan Agner2016-11-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * ti_armv7_keystone2: env: Add NFS loading support for PMMC and MONAndrew F. Davis2016-11-281-0/+3
| | | | | | | | | | | | | | | | | | NFS loading support has been added to the default environment for most boot components, as PMMC and MON loading were added later they did not originally get the NFS commands added, add these now. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
| * keystone2: Move target selection to KconfigAndrew F. Davis2016-11-284-4/+0
| | | | | | | | | | | | | | | | | | The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick a board target, but the header configs also set K2x_EVM. This config is redundant, remove it and use TARGET_K2x_EVM everywhere in its place. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
| * linux/compat.h: Properly implement ndelay fallbackmario.six@gdsys.cc2016-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c68c62 ("i2c: mvtwsi: Make delay times frequency-dependent") extensively used the ndelay function with a calculated parameter which is dependant on the configured frequency of the I2C bus. If standard speed is employed, the parameter is usually 10000 (10000ns period length for 100kHz frequency). But, since the arm architecture does not implement a proper version of ndelay, the fallback default from include/linux/compat.h is used, which defines every ndelay as udelay(1). This causes problems for slower speeds on arm, since the delay time is now 9us too short for the desired frequency, which leads to random failures of the I2C interface. To remedy this, we implement a proper, parameter-aware ndelay fallback for architectures that don't implement a real ndelay function. Reported-By: Jason Brown <Jason.brown@apcon.com> To: Tom Rini <trini@konsulko.com> To: Heiko Schocher <hs@denx.de> Signed-off-by: Mario Six <mario.six@gdsys.cc>
| * colibri_vf: usb gadget: toradex pid is now set genericallyMax Krummenacher2016-11-281-7/+0
| | | | | | | | | | | | | | | | remove now unused CONFIG_TRDX_PID_XXX Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
| * apalis/colibri_t30: move environment locationMarcel Ziswiler2016-11-282-6/+8
| | | | | | | | | | | | | | | | | | Now with the config block handling in place move the U-Boot environment location before the config block at the end of 1st "boot sector" as deployed during production using our downstream BSP. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
| * apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handlingMarcel Ziswiler2016-11-286-9/+19
| | | | | | | | | | | | | | | | With our common code in place actually make use of it across all our modules. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
| * sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICEEmmanuel Vadot2016-11-281-0/+1
| | | | | | | | | | | | | | | | | | Set CONFIG_SYS_MMC_MAX_DEVICE to 4 for sunxi SoC. This define is needed in the API code. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * Merge git://git.denx.de/u-boot-rockchipTom Rini2016-11-265-1/+28
| |\
| | * rockchip: configs: correct partitions 'boot' sizeJacob Chen2016-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | It should be 112M, to make rootfs start at 0x40000 Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| | * rockchip: Rename jerry files to veyronSimon Glass2016-11-251-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we have a single rk3288-based Chromebook: chromebook_jerry. But all such Chromebooks can use the same binary with only device-tree differences. The family name is 'veyron', so rename the files accordingly. Also update the device-tree filename since this currently differs from Linux. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * video: Track whether a display is in useSimon Glass2016-11-251-0/+10
| | | | | | | | | | | | | | | | | | | | | Mark a display as in use when display_enable() is called. This can avoid a display being used by multiple video-output devices. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * config: rk3036: enable configs for USB HOSTKever Yang2016-11-251-0/+7
| | | | | | | | | | | | | | | | | | | | | rk3036 using dwc2 usb controller, need enable relate configs for it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| | * power: regulator: Introduce regulator_set_value_force functionKeerthy2016-11-251-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | In case we want to force a particular value on a regulator irrespective of the min/max constraints for testing purposes one can call regulator_set_value_force function. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-11-255-1/+377
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/Kconfig
| | * | armv7: ls1021aiot: Fixing SPL compiling issuesYork Sun2016-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To align with SPL change 38fed8ab and 693d4c9f, add Kconfig option CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to defconfig, and remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS. Signed-off-by: York Sun <york.sun@nxp.com> CC: Feng Li <feng.li_2@nxp.com>
| | * | arm: exynos7420: remove custome low level init functionThomas Abraham2016-11-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the custom low-level initialization function and reuse the default low-level initialization function. But this requires the ARMV8_MULTIENTRY config option to be enabled for Exynos7420. On Exynos7420, the boot CPU belongs to the second cluster and so with ARMV8_MULTIENTRY config option enabled, the 'branch_if_master' macro fails to detect the CPU as boot CPU. As a temporary workaround the CPU_RELEASE_ADDR is set to point to '_main'. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Alison Wang <alison.wang@nxp.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| | * | armv8: ls1046aqds: add lpuart supportShaohui Xie2016-11-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | LPUART0 is used by default, and it's using platform clock. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| | * | armv7: Add support of ls1021a-iot boardFeng Li2016-11-211-0/+367
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for Freescale ls1021a-iot board. Signed-off-by: Feng Li <feng.li_2@nxp.com> [YS: rewrite commit message, fix whitespace in Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
| | * | configs: ls2080ardb: Enable DSPI flash supportYuan Yao2016-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is the stmicro DSPI flash on LS12080ARDB. Enable DSPI flash related configure options. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| | * | armv8:ls1012a: Update bootargs for fast-bootPratiyush Srivastava2016-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add optimization parameters like "quiet" in bootargs to reduce the system boot time Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | colibri_pxa270: transition to driver model for serialMarcel Ziswiler2016-11-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add serial platform data to board file. Enable driver model for PXA serial driver. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
| * | | colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reasonMarcel Ziswiler2016-11-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With em humble DM and Kconfig migraters U-Boot binary size keeps increasing. Drop a bunch of less needed stuff to save another precious 20+ KB. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
| * | | serial: pxa: integrate optional driver model handlingMarcel Ziswiler2016-11-231-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Optional driver model handling integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | | serial: pxa: use kconfig for serial configurationMarcel Ziswiler2016-11-233-4/+0
| | |/ | |/| | | | | | | | | | | | | | | | Migrate the PXA serial driver to be configured via Kconfig. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-11-222-6/+5
| |\ \
| | * | spi: Remove dual flash options/flagsJagan Teki2016-11-191-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dual flash code in spi are usually take the spi controller to work with dual connected flash devices. Usually these dual connection operation's are referred to flash controller protocol rather with spi controller protocol, these are still present in flash side for the usage of spi-nor controllers. So, this patch remove the dual_flash options or flags in sf which are triggered from spi controller side. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| | * | sf: Adopt flash table INFO macro from LinuxJagan Teki2016-11-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INFO macro make flash table entries more adjustable like adding new flash_info attributes, update ID length bytes and so on and more over it will sync to Linux way of defining flash_info attributes. - Add JEDEC_ID - Add JEDEC_EXT macro - Add JEDEC_MFR - spi_flash_params => spi_flash_info - params => info Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * | | ARM: OMAP3_LOGIC: Update MTD Partition TableAdam Ford2016-11-211-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous partition table did not support a separate device tree and the kernel size was limited to 4MB. This update shows the location of the device tree (labeled as spl-os) for those who want to use Falcon Mode or use U-Boot to store the Flattened Device Tree (FDT) to NAND without appending it to the kernel. This also grows the kernel to 6MB since 4MB was becomming tight Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | | ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon ModeAdam Ford2016-11-211-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory map defined in commit ("49c7303f0e52: OMAP3: Enable SPL on omap3_logic) was used by a copy-paste of another board without fully understanding how the map works in Falcon mode. This patch undoes the customization and uses the default SPL Memory Map for OMAP3. When building the uImage, set LOADADDR=0x82000000 and Falcon mode should properly load. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | | image: Combine image_sig_algo with image_sign_infoAndrew Duda2016-11-211-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the need to explicitly add SHA/RSA pairings. Invalid SHA/RSA pairings will still fail on verify operations when the hash length is longer than the key length. Follow the same naming scheme "checksum,crytpo" without explicitly defining the string. Indirectly adds support for "sha1,rsa4096" signing/verification. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | image: Add crypto_algo struct for RSA infoAndrew Duda2016-11-211-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cut down on the repetition of algorithm information by defining separate checksum and crypto structs. image_sig_algos are now simply pairs of unique checksum and crypto algos. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | rsa: Verify RSA padding programaticallyAndrew Duda2016-11-214-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Padding verification was done against static SHA/RSA pair arrays which take up a lot of static memory, are mostly 0xff, and cannot be reused for additional SHA/RSA pairings. The padding can be easily computed according to PKCS#1v2.1 as: EM = 0x00 || 0x01 || PS || 0x00 || T where PS is (emLen - tLen - 3) octets of 0xff and T is DER encoding of the hash. Store DER prefix in checksum_algo and create rsa_verify_padding function to handle verification of a message for any SHA/RSA pairing. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | rsa: cosmetic: rename pad_len to key_lenAndrew Duda2016-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | checksum_algo's pad_len field isn't actually used to store the length of the padding but the total length of the RSA key (msg_len + pad_len) Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2Tom Rini2016-11-2118-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the move to arch/arm/mach-omap2 there are now very few uses of CONFIG_OMAP_COMMON and further they can all be replaced with CONFIG_ARCH_OMAP2, so do so. Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platformsTom Rini2016-11-2130-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | ext4: Allow reading files with non-zero offset, clamp read lenStefan Brüns2016-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support was already implemented, but not hooked up. This fixes several fails in the test cases. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
| * | | arm: dra7xx: Unify Android partition tableSemen Protsenko2016-11-211-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make Android partition table the same as for AM57x EVM. 1. Make "bootloader" partition start from 0x300 sectors offset, so DRA7 is bootable in Android mode (see CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option). 2. Increase "bootloader" partition size, because size of u-boot.img is about 632 KiB (when building DT defconfig, with FIT image enabled). 3. Specify "reserved" partition explicitly, rather than specifying "efs" partition start. Reserved area will be used to store U-Boot environment on eMMC. It's convenient to have it exposed explicitly so we can read/write U-Boot environment. 4. Keep all Android partitions locations intact, by reducing "reserved" partition size. CONFIG_ENV_SIZE is considered. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | arm: am57xx: Enable 8-bit eMMC accessSemen Protsenko2016-11-211-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | arm: am57xx: Define Android partition tableSemen Protsenko2016-11-211-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "fastboot oem format" command reuses "gpt write" command, which in turn requires correct partitions defined in $partitions variable. This patch adds such definition of Android partitions for DRA7XX EVM board. By default $partitions variable contains Linux partition table. In order to prepare Android environment one can run next commands from U-Boot shell: => env set partitions $partitions_android => env save After those operations one can go to fastboot mode and perform "fastboot oem format" to create Android partition table. While at it, enable CONFIG_RANDOM_UUID to spare user from providing UUIDs for each partition manually. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | | omap3_beagle: use config_distro_bootcmdGuillaume GARDET2016-11-211-33/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for distro_bootcmd on MMC and fall back to prior behavior if distro_bootcmd fails. Tested on Beagleboad xM to boot GRUB2 (and then Linux kernel) in EFI mode from MMC. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | | ti_omap5_common: Respect USB controller number in fastbootSemen Protsenko2016-11-211-1/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On "fastboot reboot-bootloader" we check "dofastboot" variable and do "fastboot 0" command in U-Boot if it's 1. But there are boards which have USB controller number other than 0, so it should be respected when performing "fastboot" command. This patch reuses CONFIG_FASTBOOT_USB_DEV option toprovide correct USB controller number to "fastboot" command. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORSSemen Protsenko2016-11-1836-55/+2
| | | | | | | | | | | | | | | | | | This option isn't used for anything, so get rid of it. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to KconfigSemen Protsenko2016-11-1841-45/+0
| |/ | | | | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
| * Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini2016-11-176-4/+59
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch queue for efi - 2016-11-17 Highlights this time around: - x86 efi_loader support - hello world efi test case - network device name is now representative - terminal output reports modes correctly - fix psci reset for ls1043/ls1046 - fix efi_add_runtime_mmio definition for x86 - efi_loader support for ls2080
| | * ls2080ardb: Convert to distro bootAlexander Graf2016-11-171-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most new systems in U-Boot these days make use of the generic "distro" framework which allows a user to have U-Boot scan for a bootable OS on all available media types. This patch extends the LS2080ARDB board to use that framework if the hard coded NOR flash location does not contain a bootable image. Signed-off-by: Alexander Graf <agraf@suse.de>
| | * efi_loader: Fix efi_add_runtime_mmio definitionAlexander Graf2016-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER was different from the enabled one. Sync them. Signed-off-by: Alexander Graf <agraf@suse.de>
View Lorry Controller Status