summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* Convert CONFIG_ARCH_CPU_INIT to KconfigAdam Ford2019-08-2541-51/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Felix Brack <fb@ltec.ch>
* Merge tag 'u-boot-rockchip-20190823' of ↵WIP/24Aug2019Tom Rini2019-08-2412-24/+3
|\ | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - remove rk3288 fennec board - remove SPL raw image support for Rockchip SoCs - add common misc_init_r() for ethaddr from cpuid - enable USB HOST support for rk3328 - unify code for finding a valid gpt in part driver
| * evb_rk3399: revert CONFIG_SYS_MMC_ENV_DEV to 0Max Kellermann2019-08-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | This was changed to 1 in commit 0717dde057e, but a few months later, commit 5f9411af37b swapped the order of eMMC and SD card by assigning indexed aliases to `&sdhci` and `&sdmmc`. Signed-off-by: Max Kellermann <max.kellermann@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Add signature) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * disk: efi: ignore 'IGNOREME' GPT header found on cros eMMCsUrja Rannikko2019-08-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Some ChromeOS devices (atleast veyron speedy) have the first 8MiB of the eMMC write protected and equipped with a dummy 'IGNOREME' GPT header - instead of spewing error messages about it, just silently try the backup GPT. Note: this does not touch the gpt cmd writing/verifying functions, those will still complain. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| * rockchip: rk3288: remove fennec board supportKever Yang2019-08-231-14/+0
| | | | | | | | | | | | Since there is no one using this board, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * rockchip: Move config SYS_MALLOC_LEN to KconfigKever Yang2019-08-239-9/+0
| | | | | | | | | | | | Use Kconfig for option SYS_MALLOC_LEN and default to 0x2000000. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | Merge branch '2019-08-23-master-imports'Tom Rini2019-08-2431-42/+0
|\ \ | | | | | | | | | | | | | | | - Migrate CONFIG_MX_CYCLIC, CONFIG_FSL_USDHC and CONFIG_MXS_GPIO to Kconfig - Fix some SPL/TPL and ARM64 dependencies
| * | Convert CONFIG_MX_CYCLIC to KconfigWIP/2019-08-23-master-importsAdam Ford2019-08-2311-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_MX_CYCLIC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: David Lechner <david@lechnology.com>
| * | Convert CONFIG_FSL_USDHC to KconfigAdam Ford2019-08-2319-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
| * | kconfig: Convert CONFIG_MXS_GPIO to KconfigLukasz Majewski2019-08-231-6/+0
| |/ | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_MXS_GPIO Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/571260789 Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clkWIP/23Aug2019Tom Rini2019-08-232-0/+4
|\ \ | |/ |/|
| * sandbox: clk: add clk enable/disable test codePeng Fan2019-08-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | Since we added clk enable_count and prograte clk child enabling operation to clk parent, so add a new function sandbox_clk_enable_count to get enable_count for test usage. And add test code to get the enable_count after we enable/disable the device clk. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * clk: introduce enable_countPeng Fan2019-08-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | As what Linux Kernel 5.3.0 provides when enable/disable clk, there is an enable_count in clk_core_disable/enable. Introduce enable_count to track the clk enable/disable count when clk_enable/disable for CCF. And Initialize enable_count to 0 when register the clk. And clk tree dump with enable_count will be supported, it will be easy for us to check the clk status with enable_count Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | armv8: ls1088aqds: support DSPI mode by hwconfigChuanhua Han2019-08-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRDCFG4[USBOSC] and BRDCFG5[SPR] register field of Qixis device is used to control SPI and other IP signal routing. USBOSC: 0= SPI_CLK used as external USB REFCLK input driven with 24.000 MHz. SPI devices are unusable in this mode. 1= SPI_CLK used as SPI clock. SPI devices are usable in this mode. USB block is clocked from internal sources SPR[3:2]: SPI_CS / SDHC_DAT4:7 Routing (schematic net CFG_SPI_ROUTE[3:2]): 00= SDHC/eMMC 8-bit 01= SD Card Rev 2.0/3.0 10= SPI on-board memory 11= TDM Riser / SPI off-board connector. The default value is 00 if an SDCard/eMMC card is selected as the boot device. SPR[1:0]: SPI_SIN/SOUT/SCK Routing (schematic net CFG_SPI_ROUTE[1:0]): 00= SDHC Sync loop 01= TDM Riser / SPI off-board connector. 10= SPI on-board memory. 11= SPI off-board connector. By default, the SPI feature is not available, so we need to configure the above register fields to select the route to the SPI feature. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | armv8: ls1046afrwy: Define CONFIG_ENV_ADDR for QSPI BootAlison Wang2019-08-221-0/+3
| | | | | | | | | | | | | | | | | | Defines CONFIG_ENV_ADDR for QSPI Boot which specifies the start address of the flash sector containing the environment. It fixes the issue that bootcmd is always set as default at bootup. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | armv8: ls1088aqds: Add support of I2C driver model.Chuanhua Han2019-08-221-2/+2
| | | | | | | | | | | | | | Udate ls1088aqds board init code to support DM_I2C. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | boards: ls1088a: Add support of I2C driver modelChuanhua Han2019-08-222-2/+3
| | | | | | | | | | | | | | | | | | | | | | DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used.When DM_I2C_COMPAT is not enabled for compilation, a compilation error will be generated. This patch solves the problem that the i2c-related api of the ls1088a platform does not support dm. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | boards: ls2088aqds: Add support of I2C driver model.Chuanhua Han2019-08-221-0/+3
| | | | | | | | | | | | | | Update ls2088aqds board init code to support DM_I2C. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | rtc: ds3232/ds3231: Add support to generate 32KHz output for driver moduleChuanhua Han2019-08-222-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add an implementation of the rtc_enable_32khz_output() that uses the driver model i2c APIs. Also put code related to rtc_enable_32khz_output under CONFIG_RTC_ENABLE_32KHZ_OUTPUT. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | boards: ls2088a: Add support of I2C driver model.Chuanhua Han2019-08-222-0/+4
| | | | | | | | | | | | | | | | | | | | | | DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used.When DM_I2C_COMPAT is not enabled for compilation, a compilation error will be generated. This patch solves the problem that the i2c-related api of the ls2088a platform does not support dm. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | armv8: ls1028aqds: Remove the definition of CONFIG_SYS_I2C_EARLY_INITChuanhua Han2019-08-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | Since i2c uses dm mode, i2c controller will be initialized when reading and writing devices on i2c bus. So there is no need for the original non-dm mode i2c early initialization function call, this patch removed the definition of CONFIG_SYS_I2C_EARLY_INIT. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | boards: ls1028a: Add support of I2C driver modelChuanhua Han2019-08-222-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used.When DM_I2C_COMPAT is not enabled for compilation, a compilation error will be generated. This patch solves the problem that the i2c-related api of the ls1028a platform does not support dm. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | configs: ls1043aqds: Move CONFIG_FSL_QSPI to defconfigAshish Kumar2019-08-221-1/+0
| | | | | | | | | | | | | | | | | | Move CONFIG_FSL_QSPI from header file to defconfigs, consequently unset imply config(CONFIG_SPI_FLASH_BAR) which is not valid for LS series. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | drivers: net: mc: Report extra memory to LinuxMeenakshi Aggarwal2019-08-221-0/+1
|/ | | | | | | | | | MC firmware need to be aligned to 512M, so minimum 512MB DDR is reserved. But MC support to work with 128MB or 256MB DDR memory also, in this case, rest of the memory is not usable. So reporting this extra memory to Linux through dtb memory fixup. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* ARM: da850evm: Remove dead codeAdam Ford2019-08-201-5/+0
| | | | | | | | | Now that SPL supports DM_SERIAL and the direct NOR boot supports DM_SERIAL, the check to see if DM_SERIAL is defined can go away, because all da850evm variants now support DM_SERIAL. This patch simply removes some dead precompiler defines. Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: da850evm: Remove dead SPI CodeAdam Ford2019-08-201-3/+0
| | | | | | | | With SPL now supporting DM_SPI, the need for compiler directives and hard-coded addresses is obsolete. This patch removes some dead legacy code defining the SPI base address Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omapl138_lcdk: Enable USBAdam Ford2019-08-201-0/+6
| | | | | | | The OMAPL138-lcdk has two USB controllers which are currently disabled. This patch enables them. Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: Rename environment variable fit_bootfile to name_fitAndrew F. Davis2019-08-202-10/+7
| | | | | | | | Like we did with 'fit_loadaddr' to 'addr_fit', the variable 'fit_bootfile' contains a name and so should be prefixed with name_. Make this change here. Signed-off-by: Andrew F. Davis <afd@ti.com>
* configs: Rename environment variable fit_loadaddr to addr_fitAndrew F. Davis2019-08-203-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is the first part of a larger effort I would like to propose to unify and simplify the default set of environment variables. When many early environment variables were named there were fewer images being loaded, usually just a kernel. At this time names like 'loadaddr' would suffice. Now we have more images and many more commands that act on them, often re-using the same variable for several different uses. The contents of a variable are also not immediately known causing one to have to look up a chain of variables to understand what a command is actually doing. I suggest the following. To start, all variables containing names should be prefixed with name_ and addresses with addr_. This is like how K2 already does things and allows for simple universal commands like: get_fdt_nfs=nfs ${addr_fdt} /boot/${name_fdt} Which is very clear on what is intended here and would work across all board that using the this naming convention. We can do this one variable at a time, start here with addr_fit. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Andreas Dannenberg <dannenberg@ti.com>
* configs: Remove unneeded overlay_files environment variableAndrew F. Davis2019-08-202-7/+4
| | | | | | | The variable 'name_overlays' serves the same purpose. Remove 'overlay_files' and use 'name_overlays' everywhere. Signed-off-by: Andrew F. Davis <afd@ti.com>
* Merge tag 'u-boot-rockchip-20190819' of ↵WIP/19Aug2019Tom Rini2019-08-195-20/+0
|\ | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add ROC-RK3399-PC board support - Move CONFIG_SPI_FLASH_GIGADEVICE and CONFIG_CMD_USB_MASS_STORAGE to Kconfig - using SYSRESET_POWER_OFF for poweroff (Note that patch for rk8xx pmic is droped for it can not pass Travis build) - fix ofnode_get_name() assert
| * configs: Move CONFIG_CMD_USB_MASS_STORAGE properly into KconfigUrja Rannikko2019-08-194-16/+0
| | | | | | | | | | | | | | | | | | This affects RK3036, RK322X and RK3288 - the defconfig changes done by moveconfig.py for the veyrons were left out on purpose because they dont have an OTG port, and will get their config updated in the next commit. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| * configs: Move CONFIG_SPI_FLASH_GIGADEVICE properly into KconfigUrja Rannikko2019-08-192-4/+0
| | | | | | | | | | | | | | | | | | Affects rk3288 veyrons and rk3036, this was mostly done by moveconfig.py. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | global_data: Remove comment of reserved arch-specific GD flagsStefan Roese2019-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the removal of the x86 specific GD flags, there are no arch- specific GD flags any more. Let's remove the comment about reserving the upper 16 bits for arch-specific flags in the common header. This gives us more flexibility with the usage of the GD flags. As a matter of fact, we are already using more than 16 bits for common GD flags (with the addition of GD_FLG_WDT_READY). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | cbfs: Add functions to support multiple CBFSsSimon Glass2019-08-181-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | Sometimes an image has multiple CBFS. The current CBFS API is limited to handling only one at time. Also it keeps track of the CBFS internally in BSS, which does not work before relocation, for example. Add a few new functions to overcome these limitations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* | cbfs: Move result variable into the structSimon Glass2019-08-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | Move the result variable into the struct also, so that it can be used when BSS is not available. Add a function to read it. Note that all functions sill use the BSS version of the data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: qemu: Fix build warnings with CONFIG_DISTRO_DEFAULTS=nBin Meng2019-08-181-4/+7
|/ | | | | | | Use DISTRO_BOOTENV to decouple BOOTENV from CONFIG_DISTRO_DEFAULTS. Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* Merge tag 'efi-2019-10-rc3' of ↵WIP/17Aug2019Tom Rini2019-08-171-14/+128
|\ | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc3 This pull request provides corrections for the SetVirtualAddress runtime service and avoids possible calls to NULL by consumers of the EFI_PXE_BASE_CODE_PROTOCOL.
| * efi_loader: EFI_PXE_BASE_CODE_PROTOCOL stubHeinrich Schuchardt2019-08-151-14/+128
| | | | | | | | | | | | | | | | | | | | | | | | U-Boot implements the EFI_PXE_BASE_CODE_PROTOCOL because GRUB uses the mode information for booting via PXE. All function pointers in the protocol were NULL up to now which will cause immediate crashes when the services of the protocol are called. Create function stubs for all services of the protocol returning EFI_UNSUPPORTED. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | ARM: socfpga: update CONFIG_SPL_FS_LOAD_PAYLOAD_NAME to u-boot.imgDalon Westergreen2019-08-151-1/+1
|/ | | | | | | Bring cyclone5 / arria5 / arria10 in line with convention and use u-boot.img as CONFIG_SPL_FS_LOAD_PAYLOAD_NAME. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellWIP/12Aug2019Tom Rini2019-08-128-595/+392
|\ | | | | | | | | | | | | | | | | - Various improvements to Keymile boards - mostly DT conversation (Pascal & Holger) - Removal of now unsupported Keymile boards (Pascal & Holger) - Small MVEBU PCI fix (Marek) - Turris Omnia defconfig update (Marek) - Misc Allied Telesis defconfig updates (Chris)
| * powerpc/km: remove unmaintained board KMLION1Holger Brunck2019-08-122-414/+390
| | | | | | | | | | | | | | | | | | This board is unmaintained and can be removed. This also allows us to remove kmp204x-common.h and integrate it in kmp204x.h. Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * powerpc/km: remove unmaintained target KMVECT1Holger Brunck2019-08-121-56/+0
| | | | | | | | | | | | Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km/arm: remove unmaintained target PORTL2Pascal Linder2019-08-121-4/+0
| | | | | | | | | | | | | | | | | | Remove the PORTL2 board and all its dependencies as it is no longer supported by the company. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km/rgmii: port Ethernet interface of KM Kirkwood boards to driver modelPascal Linder2019-08-121-0/+1
| | | | | | | | | | | | | | | | | | | | Activate the driver model for the Ethernet interface (RGMII) in the KM Kirkwood Kconfig file. Additionally, raise the auto negotiation timeout to eight seconds as more time is required for those boards. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km/uart: port UART interface of KM Kirkwood boards to driver modelPascal Linder2019-08-121-9/+0
| | | | | | | | | | | | | | | | | | | | | | Activate the driver model for the serial interface in the KM Kirkwood Kconfig file. The associated preprocessor definitions could be removed from the header file. However, the clock of 200 MHz needs to be declared in the device tree. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km: fixed typo in KM Kirkwood header filePascal Linder2019-08-121-1/+1
| | | | | | | | | | | | | | | | | | A typo in the km_kirkwood.h header prevented to undefine the initialization of the Kirkwood PCIe interface. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km: clean up header files for KM Kirkwood boardsPascal Linder2019-08-122-24/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove unused preprocessor definitions and comments of already eliminated code. The Ethernet driver configuration is already declared in arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km: remove obsolete definitions in KM header filesPascal Linder2019-08-127-87/+0
| | | | | | | | | | | | | | | | | | | | After moving the KM specific configurations to Kconfig, the associated preprocessor definitions can now be removed in the headers. Moreover, the whitelist has been adapted correspondingly. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km: add Kconfig menus for KM boardsPascal Linder2019-08-124-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To execute the conversion away from board specific header files, Kconfig menus have been implemented for all KM boards and additionally for those having an ARM architecture. For the moment, the preprocessor definitions stay in the headers. The boolean types, however, needed a modification (#define CONFIG_* 1). The default configuration files of some boards required an update in order to not change the currently defined values of the configurations. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
View Lorry Controller Status