summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'u-boot-rockchip-20191026' of ↵WIP/26Oct2019Tom Rini2019-10-263-3/+3
|\ | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000
| * rockchip: config: update CONFIG_SPL_MAX_SIZE for 64bit CPUsKever Yang2019-10-263-3/+3
| | | | | | | | | | | | | | | | | | | | Since we move the ATF bl31 entry for 64bit CPUs to 0x40000, we need to limit the SPL size in 0x40000(start from 0) so that we don't need to do the relocate for ATF loading. Note that there will be separate BSS, STACK and MALLOC heap, so the size 0x40000(256KB) should be enough for SPL text. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mipsWIP/25Oct2019Tom Rini2019-10-2524-51/+65
|\ \ | |/ |/| | | | | | | | | | | | | - bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs - bmips: various small fixes - mtmips: add new drivers for clock, reset-controller and pinctrl - mtmips: add support for high speed UART - mtmips: update/enhance drivers for SPI and ethernet - mtmips: add support for MMC
| * mips: mtmips: change baudrate table for all boardsWeijie Gao2019-10-252-2/+2
| | | | | | | | | | | | | | This patch changes baudrate table for all boards preparing for using mtk highspeed uart driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
| * bmips: configs: switch to size definitionsÁlvaro Fernández Rojas2019-10-2522-45/+58
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * mips: bmips: remove unneeded definitionsÁlvaro Fernández Rojas2019-10-251-4/+0
| | | | | | | | | | | | | | These are no longer needed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * bmips: enable vr-3032u nand supportÁlvaro Fernández Rojas2019-10-251-0/+5
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* | Merge tag 'xilinx-for-v2020.01-part2' of ↵Tom Rini2019-10-251-2/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 part 2 common: - Fix manual relocation for repeatable commands arm: - Also clean up generated dtbos microblaze: - Add support for Manual relocation in crypto framework - Tune and align architecture bootm support zynq: - DT sync ups - Some defconfig updates - Remove empty board_early_init_f() zynqmp: - Clean firmware handing via drivers/firmware/ - DT/defconfig name alignments - DT cleanups with using firmware based clock driver - Some defconfig updates - Add IIO ina226 DT description - Tune zynqmp_psu_init_minimalize.sh script - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216 versal: - Clean firmware handing via drivers/firmware/ - Add gpio support - Enable DT overlay/USB/CLK/FPGA - DT updates - Tune mini configuration spi: - gqspi - Remove unused headers
| * ARM: zynq: Move BOOTM_NETBSD to KconfigMichal Simek2019-10-241-2/+0
| | | | | | | | | | | | | | | | | | | | The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") moved BOOTM_ options to Kconfig that's why align zynq defconfig with it. Disabling NETBSD was done by commit d6f48ea5ce18 ("ARM: zynq: Do not enable NETBSD support by default"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch '2019-10-24-UFS-support'Tom Rini2019-10-241-1/+3
|\ \ | | | | | | | | | - Add Universal Flash Storage (UFS) support
| * | env: ti: Add environment variables to boot from UFSFaiz Abbas2019-10-231-1/+3
| |/ | | | | | | | | | | | | | | | | | | | | Add environment variables to boot kernel from a filesystem contained in the 2nd UFS LUN. The user can boot from a ufs filesystem just by entering the following commands. => setenv boot ufs => boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellWIP/24Oct2019Tom Rini2019-10-241-0/+3
|\ \ | |/ |/| | | | | - Add support for HyperBus Memory Controller of TI's J721e and AM654 SoCs (Vignesh)
| * configs: j721e_evm.h: Define CONFIG_SYS_MAX_FLASH_BANKS_DETECTVignesh Raghavendra2019-10-241-0/+3
| | | | | | | | | | | | | | | | Define CONFIG_SYS_MAX_FLASH_BANKS_DETECT so that number of flash banks are automatically detected by CFI flash driver Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | Merge tag 'u-boot-stm32-2019-10-23' of ↵WIP/23Oct2019Tom Rini2019-10-231-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Disable CONFIG_NET flag for MCU STM32 - Fix ramdisk_addr_r for stm32f746-disco - Fix USB product id for stm32mp1
| * | configs: stm32f746-disco: Fix ramdisk_addr_rPatrice Chotard2019-10-221-1/+1
| |/ | | | | | | | | | | | | | | Set ramdisk_addr_r to 0xC0600000. Reported-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
* | configs: ls1012afrwy: Add CONFIG_ENV_ADDRKuldeep Singh2019-10-211-0/+5
| | | | | | | | | | | | | | | | This configuration enables picking the environment from flash before DDR init. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* | configs: ls1012ardb: Add CONFIG_ENV_ADDRKuldeep Singh2019-10-211-0/+4
|/ | | | | | | | | CONFIG_ENV_ADDR config option enables picking the environment from flash before DDR init. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* configs: sei610: Add config file to fix userdata sizeGuillaume La Roque2019-10-181-0/+31
| | | | | | | | Add separate config file to handle the different eMMC size on the sei610 board. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* configs: sei510: rework header and fix userdata sizeGuillaume La Roque2019-10-182-119/+138
| | | | | | | | Move android generic config and boot sequence in meson64_android header and fix size of userdata to use all eMMC on SEI510. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* configs: sei510: enable Video Display supportNeil Armstrong2019-10-181-0/+12
| | | | | | | | | Add the necessary config options to support BMP display over HDMI, and add a preboot command to load the BMP file from a predefined eMMC partition. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
* arm: remove the H2200 boardHeinrich Schuchardt2019-10-161-128/+0
| | | | | | | | | | | | U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2019-10-141-30/+88
|\ | | | | | | - vining_fpga updates
| * ARM: socfpga: vining_fpga: Update environmentMarek Vasut2019-10-091-24/+82
| | | | | | | | | | | | | | | | Update board environment to match the one used in deployment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
| * ARM: socfpga: vining_fpga: Rename VINING|FPGAMarek Vasut2019-10-091-6/+6
| | | | | | | | | | | | | | | | | | The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | Merge tag 'u-boot-imx-20191014' of ↵Tom Rini2019-10-1410-143/+100
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
| * | colibri_imx7: remove legacy sdboot wrapperIgor Opaniuk2019-10-131-23/+0
| | | | | | | | | | | | | | | | | | Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * | colibri_imx6: remove legacy sdboot wrapperIgor Opaniuk2019-10-131-18/+0
| | | | | | | | | | | | | | | | | | Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * | colibri-imx6ull: remove legacy sdboot wrapperIgor Opaniuk2019-10-131-14/+0
| | | | | | | | | | | | | | | | | | Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * | apalis_imx6: remove legacy sdboot wrapperIgor Opaniuk2019-10-131-19/+0
| | | | | | | | | | | | | | | | | | Remove legacy sdboot wrapper as distroboot can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * | imx8qm/qxp: Set SPL TEXT base to OCRAM baseYe Li2019-10-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Modify the SPL TEXT base from OCRAM alias to OCRAM base 0x100000, so we can use full OCRAM not limit to 96KB Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
| * | imx: config: Update KP's TPC70 config to support SWUpdateLukasz Majewski2019-10-131-2/+5
| | | | | | | | | | | | | | | | | | | | | This patch updates envs responsible for using USB pendrive as a SWUpdate based tool for recovery and update. Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * | imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-bootLukasz Majewski2019-10-131-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the TPC70 to use driver model and device tree description in both SPL and u-boot proper. Notable changes (DM/DTS conversion): - PINCTRL{_IMX6} - DM_I2C - enable 'regulator' and 'pmic' commands - DM_MMC and BLK (USDHC) - DM_ETH - DM WDT (including SYSRESET) Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * | imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL updateLukasz Majewski2019-10-131-0/+5
| | | | | | | | | | | | | | | | | | | | | The TPC70 can boot from eMMC's boot0. This patch allows it to update this HW partition's SPL. Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * | imx: tpc70: config: Add script commands to update u-boot and OE's wicLukasz Majewski2019-10-131-0/+21
| | | | | | | | | | | | Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * | pico-imx7d: Support distro boot for FIT image caseJun Nie2019-10-131-26/+11
| | | | | | | | | | | | | | | | | | | | | Support distro boot for pico imx7d in FIT image case. Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Joris Offouga <offougajoris@gmail.com>
| * | board: tbs2910: Convert eth to driver modelSoeren Moch2019-10-131-9/+0
| | | | | | | | | | | | | | | | | | So we can remove lots of legacy config code. Signed-off-by: Soeren Moch <smoch@web.de>
| * | mx6: mx6sabre common: Use more conventional spelling of fdtfileSjoerd Simons2019-10-131-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | Both the distro boot configuration as well as the general pxe support standardized on fdtfile as the variable to hold the dtb filename. Adjust to follow that such that e.g. "pxe boot" will just work. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
| * | Add i.MX7D based Meerkat96 board supportShawn Guo2019-10-131-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of 96Boards community and complies with all Consumer Edition board specifications. https://www.novtech.com/products/meerkat96.html https://www.96boards.org/product/imx7-96/ The initial supported/tested devices include: - Debug serial - SD - USB Host (with Ethernet) With these support, it's good enough for loading Linux Kernel from SD or Ethernet over USB. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* | | stm32mp1: configs: update videoYannick Fertré2019-10-131-0/+7
|/ / | | | | | | | | | | | | Update video configs to support bitmap 16bpp, 24bpp, 32bpp & RLE8. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
* | tao3530: Fix usage of mmc rescanJarkko Nikula2019-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | Currently "bootcmd" does not work as intended but instead prints MMC usage information and goes directly to "nandboot". Follow what the commit 669681104daa ("configs: Fix usage of mmc rescan") does for other boards prior to support for TechNexion TAO3530 SoM was added. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
* | configs: ti: Use addr_fit for run_fit environment variableAndrew F. Davis2019-10-111-1/+1
| | | | | | | | | | | | | | | | When running 'run_fit' the FIT file should have been loaded at 'addr_fit', although at this point they should be the same use this variable instead of 'loadaddr'. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | am335x, guardian: adapt guardian board to DMMoses Christopher2019-10-111-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | - update partition table - remove env partitions - dts: add new interfaces (uart2, extra gpio-key) remove unneeded entries update nand timings for performance improvement - defconfig: adapt configurations to suit DM remove unneeded configs - am335x_guardian.h: remove mmc boot Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | env: ti: am65x_evm: Add env support to boot the MCU R5F rprocsSuman Anna2019-10-111-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to boot the MCU domain R5F Core0 remoteproc at U-boot prompt on the AM65x EVM boards by using the 'boot_rprocs' and other env variables defined in the common environment file k3_rproc.h, and updating the 'DEFAULT_RPROCS' macro. The default configuration is to use the MCU R5F in Split mode, so both the R5F Core0 and Core1 are started before loading and booting the Linux kernel using the following firmware: MCU R5FSS0 Core0 (Split) : 0 /lib/firmware/am65x-mcu-r5f0_0-fw MCU R5FSS0 Core1 (Split) : 1 /lib/firmware/am65x-mcu-r5f0_1-fw The MCU R5FSS was initially running the R5 SPL in LockStep mode with ATCM disabled, and is actually shutdown to enable it to be reconfigured and booted by either A53 U-Boot or Linux kernel in remoteproc mode and using ATCM. The MCU R5FSS would need to be reconfigured for Lockstep mode through DT if a fault-tolerant/safety application were to be run on the cluster with the DEFAULT_RPROCS macro updated to remove the Core1 firmware. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | env: ti: j721e-evm: Add support to boot rprocs including R5Fs and DSPsSuman Anna2019-10-111-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to boot some remoteprocs at U-boot prompt on the J721E EVM boards by using the 'boot_rprocs' and other env variables defined in the common environment file k3_rproc.h, and updating the 'DEFAULT_RPROCS' macro. The list of R5F cores to be started before loading and booting the Linux kernel are as follows, and in this order: Main R5FSS0 (Split) Core1 : 3 /lib/firmware/j7-main-r5f0_1-fw Main R5FSS1 (LockStep) : 4 /lib/firmware/j7-main-r5f1_0-fw The MCU R5FSS0 and Main R5FSS1 are currently in LockStep mode, so the equivalent Core1 rprocs (rproc #1 and #5) are not included. The Main R5FSS0 Core0 (rproc #2) is already started by R5 SPL, so is not included in the list either. The DSP cores are started in the following order before loading and booting the Linux kernel: C66_0: 6 /lib/firmware/j7-c66_0-fw C66_1: 7 /lib/firmware/j7-c66_1-fw C71_0: 8 /lib/firmware/j7-c71_0-fw The order of the rprocs to boot can be changed at runtime if desired by overwriting the 'rproc_fw_binaries' environment variable at U-boot prompt. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | Merge tag 'xilinx-for-v2020.01' of ↵WIP/09Oct2019Tom Rini2019-10-096-69/+77
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file
| * microblaze: Setup reasonable maximum bootm lenMichal Simek2019-10-081-0/+2
| | | | | | | | | | | | We are far from 8MB default size. Setup 64MB for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * microblaze: Enable cache by defaultMichal Simek2019-10-081-0/+3
| | | | | | | | | | | | | | | | | | | | The whole cache code needs to be redesign to read information about cache from DT instead of macro selection. Enable caches by default because systems have caches on by default for Linux. Also enable CMD_CACHE to be able to disable cache if there is any issue. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * microblaze: Move CONFIG_LMB from board file to config.hMichal Simek2019-10-081-3/+0
| | | | | | | | | | | | It is common for the whole architecture that's why move it there. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * configs: apalis-tk1: Do not define CONFIG_SYS_BOOT_RAMDISK_HIGH againMichal Simek2019-10-081-2/+0
| | | | | | | | | | | | | | | | CONFIG_SYS_BOOT_RAMDISK_HIGH is already defined in arch/arm/include/asm/config.h:10:#define CONFIG_SYS_BOOT_RAMDISK_HIGH that's why there is no reason to define it again in board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM: zynq: Remove all Xilinx private commandsMichal Simek2019-10-081-51/+3
| | | | | | | | | | | | | | All platforms have been moved to distro boot that's why remove the rest of configurations to have unified boot flow. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
View Lorry Controller Status