summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* mx6sabresd: Add Falcon mode supportDiego Dorta2016-10-171-0/+12
| | | | | | | | Allow i.MX6Q Sabre SD to load the kernel and dtb via SPL in Falcon mode. Based on the Falcon mode code for MX6 Gateworks Ventana board. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
* mx7_common: add secure boot supportGary Bisson2016-10-173-8/+9
| | | | | | | | | | | | | | Selecting the proper options to enable the build of the HAB tools. Note, this support is disabled by default, one will have to select the SECURE_BOOT configuration through menuconfig to enable it. See doc/README.mxc_hab for more details. Also remove duplicate options from board config headers. Cc: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
* mx6_common: add secure boot supportGary Bisson2016-10-171-0/+9
| | | | | | | | | | | Selecting the proper options to enable the build of the HAB tools. Note, this support is disabled by default, one will have to select the SECURE_BOOT configuration through menuconfig to enable it. See doc/README.mxc_hab for more details. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
* spl: move FDT_FIXUP_PARTITIONS to KconfigHeiko Schocher2016-10-155-27/+0
| | | | | | | Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
* spl: move SYS_OS_BASE to KconfigHeiko Schocher2016-10-152-3/+0
| | | | | | | | | Move SYS_OS_BASE to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Also migrate a4m2k] Signed-off-by: Tom Rini <trini@konsulko.com>
* spl: move SPL_OS_BOOT to KconfigHeiko Schocher2016-10-1422-25/+0
| | | | | | | Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
* include: configs: am335x: add Atheros phy supportMugunthan V N2016-10-131-0/+2
| | | | | | | | | In AM335x GP EVM, Atheros 8031 phy is used, enable the driver as AM335x SoC RGMII delay mode has to be enabled in phy as mentioned in the silicon errata Advisory 1.0.10 Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-10-1211-34/+19
|\
| * x86: Clean up unused macros in the configuration headersBin Meng2016-10-125-26/+3
| | | | | | | | | | | | | | Legacy video driver macros are not needed. Clean them up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * x86: coreboot: Convert to use DM coreboot video driverBin Meng2016-10-121-3/+3
| | | | | | | | | | | | | | This converts coreboot to use DM framebuffer driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * x86: Convert to use DM VESA video driverBin Meng2016-10-125-13/+13
| | | | | | | | | | | | | | | | | | At present only chromebook boards are converted to DM video. Other x86 boards are still using the legacy cfb_console driver. This switches to use DM version drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * x86: Adjust config to support DM_VIDEOSimon Glass2016-10-112-2/+10
| | | | | | | | | | | | | | | | | | Update the common configuration so that it works correctly when CONFIG_DM_VIDEO is enabled. This involves dropping the legacy CONFIG_VIDEO option and changing the stdio device from "vga" to "vidconsole". Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-10-121-0/+2
|\ \
| * | tegra: usb gadget: fix ci udc operation if not hostpc capableMarcel Ziswiler2016-10-101-0/+2
| |/ | | | | | | | | | | | | | | | | | | The Tegra 2 aka T20 is not host PC capable. Therefore gate the define CONFIG_CI_UDC_HAS_HOSTPC in tegra-common-usb-gadget.h in case of CONFIG_TEGRA20. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-10-121-11/+10
|\ \
| * | ARM: uniphier: define CONFIG_SMC911X along with CONFIG_MICRO_SUPPORT_CARDMasahiro Yamada2016-10-101-7/+7
| | | | | | | | | | | | | | | | | | | | | This is an on-board Ethernet device. It has no point if the Micro Support Card is not available. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: enable CONFIG_SYS_NO_FLASH if no CONFIG_MICRO_SUPPORT_CARDMasahiro Yamada2016-10-101-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | NOR flash devices are seldom used on UniPhier platforms these days. The only use case I see is the Micro Support Card is connected. Otherwise, define CONFIG_SYS_NO_FLASH to disable NOR FLASH. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: fix typos in a comment blockMasahiro Yamada2016-10-101-1/+1
| |/ | | | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-10-121-0/+103
|\ \
| * | arm: kirkwood: add support for Synology DS109 boardWalter Schweizer2016-10-091-0/+103
| |/ | | | | | | | | | | | | | | | | Synology DS109 is based on MV88F6281. The code is based on Dreamplug code with modificatons from Synologys open source repository. Signed-off-by: Walter Schweizer <swwa@users.sourceforge.net> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-10-129-41/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/ls1021aqds.h include/configs/ls1021atwr.h
| * | board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGSPratiyush Srivastava2016-10-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1012AFRDM has 512MB of DDR. So update kernel load address to 0x96000000. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> [York Sun: Reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGSPratiyush Srivastava2016-10-071-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove ramdisk_addr, ramdisk_size and update UART baud-rate. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv7: ls1021a: Move DDR config options to KconfigYork Sun2016-10-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Move DDR3, DDR4 and related config options to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | armv8: fsl-layerscape: Move DDR config options to KconfigYork Sun2016-10-063-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | Move DDR3, DDR4 and realted options to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to KconfigYork Sun2016-10-068-19/+0
| | | | | | | | | | | | | | | | | | | | | Move these options to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | arm: Move FSL_LSCH2 FSL_LSCH3 to KconfigYork Sun2016-10-064-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Move these options to Kconfig and create a sub-menu to avoid name conflict with other architectures. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | ARMv7: LS102xA: Move two macros from header files to KconfigHongbo Zhang2016-10-062-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following commits 217f92b and 1544698, these two config CPU_V7_HAS_NONSEC and CPU_V7_HAS_VIRT are moved to Kconfig, for correctly select ARMV7_PSCI. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> [York Sun: Reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv7: LS1021a: enable i-cache in start.SXiaoliang Yang2016-10-062-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First stage of u-boot can run faster after that. There is a description about skip lowlevel init in board/freescale/ls1021atwr/README. Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | common: Add DISPLAY_BOARDINFOLokesh Vutla2016-10-12194-355/+0
| | | | | | | | | | | | | | | | | | | | | | | | Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | common/Kconfig: Add DISPLAY_CPUINFOLokesh Vutla2016-10-12121-137/+0
| |/ |/| | | | | | | | | | | | | Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-10-087-54/+276
|\ \
| * | board: ge: bx50v3: Pass video bootargs for b850v3Ken Lin2016-10-071-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to clock source restrictions on i.MX6, certain pixel clock rates can not be supported. Hence default the resolution/frame rate during boot to a supported value by passing video bootargs 1024x768@60 for HDMI (Display Port1) and LVDS (Display Port2) on B850v3. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
| * | colibri_imx7: remove legancy I2C supportStefan Agner2016-10-071-2/+0
| | | | | | | | | | | | | | | | | | | | | Remove legancy I2C config and code in favor of upcomming DM/DT enable I2C support. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * | pcm052: add new BK4r1 target based on PCM052 SoMAlbert ARIBAUD \(3ADEV\)2016-10-062-6/+72
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | pcm052: allow specifying onboard DDR size in configsAlbert ARIBAUD \(3ADEV\)2016-10-061-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCM052 SoMs may be equipped with various sizes of DDR. Keep default of 256MB; new PCM052-based targets will specify their actual DDR size. Linux command line is auto-adjusted to DDR size. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | tools: mkimage: add support for Vybrid image formatAlbert ARIBAUD \(3ADEV\)2016-10-061-8/+6
| | | | | | | | | | | | | | | | | | | | | This format can be flashed directly at address 0 of the NAND FLASH, as it contains all necessary headers. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | pcm052: remove target-specific dtb name from envAlbert ARIBAUD \(3ADEV\)2016-10-061-1/+1
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | pcm052: fix MTD partitioningAlbert ARIBAUD \(3ADEV\)2016-10-061-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge 'spare' into 'bootloader' partition Use same partition for ramdisk and rootfs boot scenarios. Remove 'ramdisk' partition, use 'rootfs' for ramdisk (ramdisk and nand boot scenarios are mutually exclusive). Expand last partition to end of actual NAND size. Adjust UBIFS rootfs boot kernel arguments. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | arm: imx: add i.MX6ULL 14x14 EVK board supportPeng Fan2016-10-041-0/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6ULL EVK board support: Add device tree file, which is copied from NXP Linux. Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR. The uart iomux settings are still keeped in board file. Boot Log: U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800) CPU: Freescale i.MX6ULL rev1.0 at 396MHz CPU: Commercial temperature grade (0C to 95C) at 15C Reset cause: POR Model: Freescale i.MX6 ULL 14x14 EVK Board Board: MX6ULL 14x14 EVK DRAM: 512 MiB MMC: initialized IMX pinctrl driver FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1 is current device Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | board: tbs2910: Add CMD_PARTSoeren Moch2016-10-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no stable mmcblk device numbering over different linux versions. Enable CMD_PART to be able to query the UUID of the root filesystem partition. So we can pass root=PARTUUID=XXX instead of root=/dev/mmcblkXpY in bootargs. Leave the default environment as is for now to stay compatible with original TBS settings. Signed-off-by: Soeren Moch <smoch@web.de>
| * | board: tbs2910: Fix BOOTMAPSZSoeren Moch2016-10-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The linux kernel imx_v6_v7_defconfig sets the user/kernel memory split to 3G/1G now (was 2G/2G before). We have to adapt the BOOTMAPSZ so that the decompressor finds zImage and dtb in lowmem. Signed-off-by: Soeren Moch <smoch@web.de>
| * | wandboard: Remove videoargs scriptFabio Estevam2016-10-041-26/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | The videoargs script is kernel version dependent and since wandboard uses distro config, there is no need to handle videoargs locally. In case such video related settings are needed, then the proper location would be the distro extlinux.conf or boot.scr files. So remove 'videoargs' script. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | dra7x: dfu: qspi: increase the qspi spl partition to 256KB, Ravi2016-10-081-8/+2
| | | | | | | | | | | | | | The SPL size for dra7x platform increased beyond 64K, increasing the size to 256K to cater for future enhancement. Signed-off-by: Ravi Babu <ravibabu@ti.com>
* | dra7xx: config: cleanup: moved to kconfig for CONFIG_SPL_ENV_SUPPORTB, Ravi2016-10-081-1/+0
| | | | | | | | | | | | | | removing CONFIG_SPL_ENV_SUPPORT defined in header files due to moved to kconfig option for CONFIG_SPL_ENV_SUPPORT Signed-off-by: Ravi Babu <ravibabu@ti.com>
* | ARM: keystone: rename clk_get_rate() to ks_clk_get_rate()Masahiro Yamada2016-10-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The KeyStone platform has its own clk_get_rate() but its prototype is different from that of the common-clk (clk-uclass) framework. Prefix the KeyStone specific implementation with ks_ in order to avoid name-space conflict. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: dra7xx: Move fastboot options to defconfigSemen Protsenko2016-10-071-9/+9
| | | | | | | | | | | | | | | | Now that fastboot options are available in Kconfig, we can migrate them from DRA7 header to corresponding DRA7 defconfigs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | README: Drop unused CONFIG_SYS_LS_MC_FW_... optionsSimon Glass2016-10-061-3/+0
| | | | | | | | | | | | | | | | Drop a few that are not used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | spl: Kconfig: Move SPL_DISPLAY_PRINT to KconfigSimon Glass2016-10-062-2/+0
|/ | | | | | | | Move this option to Kconfig and tidy up existing uses. Also add a function comment to the header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2016-10-035-28/+35
|\
View Lorry Controller Status