summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.denx.de/u-boot-netTom Rini2018-04-154-3/+4
|\
| * xilinx: Only enable dist boot pxe when DHCP is enabledJoe Hershberger2018-04-133-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise, we see this: In file included from include/configs/zynq-common.h:183:0, from include/config.h:5, from include/common.h:21, from env/common.c:11: include/config_distro_bootcmd.h:319:2: error: expected ?}? before ?BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE? BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE ^ include/config_distro_bootcmd.h:319:2: note: in definition of macro ?BOOTENV_DEV_NAME_PXE? Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: fec: sharing MDIO for two enet controllersPeng Fan2018-04-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On i.MX6SX, 6UL and 7D, there are two enet controllers each has a MDIO port. But Some boards share one MDIO port for the two enets. So introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate the MDIO port for sharing. In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter the CONFIG_FEC_MXC_MDIO_BASE. To i.MX28, adapt to use the new config Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <fabio.estevam@nxp.com>
* | ARM: rmobile: Convert TPL to SPLMarek Vasut2018-04-132-10/+6
| | | | | | | | | | | | | | | | | | | | There is currently no use for building the SPL anymore, since the SPI loader can easily be replaced by TPL and TPL does load U-Boot directly. Upgrade TPL to SPL and replace what used to be SPL with it. This way we build the U-Boot sources only twice, not thrice. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Update H2 StoutMarek Vasut2018-04-131-37/+18
| | | | | | | | | | | | | | | | | | | | The H2 Stout port was broken since some time. This patch updates the H2 Stout port to use modern frameworks, DM, DT probing, SPL and TPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | configs: Fixup some CPSW-related itemsTom Rini2018-04-132-20/+0
|/ | | | | | | | | | | | | | | | | | | | - For am335x_pdu001 we do not want the CPSW driver, drop it - Re-sync the defconfig for am43xx_evm_rtconly as it came in after the patch that converted CPSW to Kconfig was posted but before it was applied. - Drop empty section / comments from pengwyn - Drop empty section / comments from baltos and drop unused CONFIG_SPL_NET_VCI_STRING (it does not enable CONFIG_SPL_NET_SUPPORT currently and SPL_NET_VCI_STRING has been migrated already). Cc: Felix Brack <fb@ltec.ch> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Fixes: f02b8d17619f ("Migrate CONFIG_DRIVER_TI_CPSW to Kconfig") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Felix Brack <fb@ltec.ch> Tested-by: Felix Brack <fb@ltec.ch>
* ARM: rmobile: Set maximum kernel size to 64 MiB on Gen3Marek Vasut2018-04-111-0/+1
| | | | | | | | | The Gen3 kernel images are often above 8 MiB, increase the maximum kernel size to 64 MiB to future-proof it, just like many other ARM64 boards do. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Add TPL support on R8A7791 M2 PorterMarek Vasut2018-04-111-0/+6
| | | | | | | | | | | | | | Add and enable TPL on M2 Porter. The TPL must fit into 16 kiB due to the Gen2 BootROM restriction. The TPL is running from MERAM and is capable of performing the initial initialization of PFC, Clock, GPIO, LBSC, DBSC and QSPI NOR. DBSC is responsible for bringing up the DDR DRAM access. The TPL is capable of loading the next stage, U-Boot, from either SPI NOR or UART as a fallback. If either does provide a valid U-Boot uImage, the system stops, which allows the operator to load U-Boot ie. via JTAG and start it manually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* spl: spi: Move CONFIG_SPL_SPI_LOAD to KconfigMarek Vasut2018-04-1146-53/+0
| | | | | | | | Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
* Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblazeTom Rini2018-04-096-2/+203
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xilinx changes for v2018.05-rc2 - Various DT changes and sync with mainline kernel - Various defconfig updates - Add SPL init for zcu102 revA - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX and zc1751-dc3 - Net fixes - xlnx,phy-type - 64bit axi ethernet support - arasan: Fix nand write issue - fpga fixes - Maintainer file updates
| * arm64: zynqmp: Add support for Xilinx zcu111-revAMichal Simek2018-04-091-0/+50
| | | | | | | | | | | | Xilinx zcu111 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Add support for Xilinx zcu106-revAMichal Simek2018-04-091-0/+47
| | | | | | | | | | | | Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Add support for zcu104 customer boardMichal Simek2018-04-091-0/+36
| | | | | | | | | | | | | | Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Add support for zc1751 dc3Michal Simek2018-04-091-0/+20
| | | | | | | | | | | | | | zc1751 is based board with dc3 extenstion card which is used for silicon validation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Add support for zcu100 aka Ultra96 boardMichal Simek2018-04-091-0/+36
| | | | | | | | | | | | Add support for Xilinx zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Enable pxe and dhcp if commands are enabledMichal Simek2018-04-091-2/+14
| | | | | | | | | | | | Targets without net can't use pxe or dhcp boot methods. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Cleanup CONFIG_VERSION_VARIABLE migrationAlex Kiernan2018-04-082-6/+0
| | | | | | | | | | | | | | | | | | | | CONFIG_VERSION_VARIABLE had already been mostly migrated to Kconfig, but two headers still referenced it. Also set defaults so that most of the defconfigs inherit the default rather than needing it to be set explicitly. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
* | Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to KconfigAlex Kiernan2018-04-0845-65/+0
| | | | | | | | | | | | | | | | | | Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
* | ti: am335x: Fix bootargs when building without NETAlex Kiernan2018-04-081-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | If DHCP/PXE commands are disabled then the compilation fails due to bootargs attempting to use them: include/config_distro_bootcmd.h:319:2: error: expected ‘}’ before ‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’ Ensure that if the command aren't enabled, we don't try and use them. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Migrate CONFIG_DRIVER_TI_CPSW to KconfigAlex Kiernan2018-04-0810-10/+0
|/ | | | | | | This converts CONFIG_DRIVER_TI_CPSW to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* treewide: Convert CONFIG_HOSTNAME to a string optionMario Six2018-04-0883-131/+133
| | | | | | | | | CONFIG_HOSTNAME is defined as a "plain" preprocessor string, but every use is couched by __stringify(...). Hence, convert it to a proper string option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* treewide: Migrate CONFIG_FSL_ESDHC to KconfigMario Six2018-04-0866-66/+0
| | | | | | Migrate the CONFIG_FSL_ESDHC option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* treewide: Migrate CONFIG_TSEC_ENET to KconfigMario Six2018-04-0844-49/+0
| | | | | | Migrate the CONFIG_TSEC_ENET option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to KconfigMario Six2018-04-0835-51/+0
| | | | | | | | Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: Migrate CONFIG_LAST_STAGE_INIT to KconfigMario Six2018-04-0811-23/+0
| | | | | | Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to KconfigMario Six2018-04-0840-52/+0
| | | | | | Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* treewide: Migrate CONFIG_SYS_ALT_MEMTEST to KconfigMario Six2018-04-0864-84/+0
| | | | | | | | Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Finish migration of CONFIG_ATMEL_SPITom Rini2018-04-072-2/+0
| | | | | | | With the previous temporary reverts, we need to re-complete the migration of CONFIG_ATMEL_SPI here now. Signed-off-by: Tom Rini <trini@konsulko.com>
* Revert "spi: atmel: Drop non-dm code"Tom Rini2018-04-072-0/+4
| | | | | | | | | As we aren't quite able to convert some platforms with a very small size limit in SPL yet, we need to revert this for now. This reverts commit 7b0947787358c6b277431d6b76ce043d8bec641d. Signed-off-by: Tom Rini <trini@konsulko.com>
* stm32mp1: change STGEN clock source to HSEPatrick Delaunay2018-04-061-1/+0
| | | | | | | | | | | | | | No more use static frequency HSI = 64MHz for STGEN clock but HSE (with higher accurency) by default. Need to remove CONFIG_SYS_HZ_CLOCK as arch timer frequency is provided at boot by BootRom and cp15 cntfrq and modified during clock tree initialization if needed. When HSI is no more used by any device, this internal oscillator can be switched off to reduce consumption. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* stm32mp1: select boot device and partitionPatrick Delaunay2018-04-061-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bootrom loads SPL from SDCARD or eMMC according BootPin selection. Then SPL loads U-Boot on the same mmc device with the following predefined GPT partitioning: on SDCARD: gpt partitioning 1: SPL 2: SPL#2 3: U-Boot 4: bootable partition on eMMC: The 2 boot partitions are used for SPL (2 copy) boot1: SPL boot2: SPL#2 The user partition use gpt partitioning 1: U-Boot 2: bootable partition This patch select the correct SPL partition (3 for SDCARD on mmc0 and 1 for eMMC on mmc1) according the BootRom information saved in TAMP register and based on configuration flasg: - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION => for BOOT_DEVICE_MMC1 or mmc 0 in U-Boot - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2 (new) => for BOOT_DEVICE_MMC2 or mmc 1 in U-Boot And the correct boot_targets is selected according the environment variables boot_device and boot_instance, with preboot command, to search the bootable partition with kernel on this device (generic distro support). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* stm32mp1: add eMMC support for ED1Patrick Delaunay2018-04-061-0/+1
| | | | | | | | | | Add command GPT support Add EMMC boot support Add the 2 other SDMMC instances for ED1: - SDMMC2 = mmc 1, eMMC on the ED1 board - SDMMC3 = extension connector, deactivated by default Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* omap3_logic: Fix FDT ADDR for ramdisk bootingAdam Ford2018-04-061-2/+2
| | | | | | | | | | The boot scripts for booting from ramdisk are using ${fdtimage} when they really should be using ${fdtaddr} This patch will fix it so the RAMdisk bootscripts operate correctly. Signed-off-by: Adam Ford <aford173@gmail.com>
* Add support for BeagleBoard.org PocketBeagleJason Kridner2018-04-061-0/+2
| | | | | | | | | | | | | | | | | | | | Texas Instruments AM3358 based low-cost board using Octavo Systems OSD3358 SIP with built-in TPS65217 PMIC and 512MB DDR3. Board features small 35mm x 55mm size, high-speed USB OTG, microSD and 72 0.1" expansion header pins with 2xSPI, 2xI2C, 2xUART, USB, 8xADC, up-to-44 GPIO, PRU pins and much more. https://beagleboard.org/pocket This was tested using the am335x_evm_usbspl_defconfig. Note that MII pins are enabled despite not having Ethernet on this board. This avoids an issue where otherwise many timeout errors would be generated. See https://e2e.ti.com/support/arm/sitara_arm/f/791/t/298976 for some related discussion. Signed-off-by: Jason Kridner <jdk@ti.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSCAlex Kiernan2018-04-068-8/+0
| | | | | | This converts CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
* powerpc: mpc8xx: cleaning up watchdogChristophe Leroy2018-04-061-2/+0
| | | | | | | | | | | | In preparation of migration to DM watchdog, clean up a bit. The 8xx watchdog really is a HW watchdog, so declare it as is then it goes through Kconfig And the watchdog reset doesn't mind getting interrupted, so no need to disable interrupts Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
* board: MCR3000: Use smaller flash sector for environmentChristophe Leroy2018-04-061-3/+3
| | | | | | | | | | | | | | | | | | | | | Latest versions of u-boot have increased in size and require more than the 256kb allocated to it. The MCR3000 board is equipped with an AM29LV160DB boot flash which is organised as follows: - One 16kb block - Two 8kb block - One 32kb block - Thirty one 64kb blocks At the time being, u-boot is a single piece occupying the 256 first kbytes, then the environment is stored in the following 64kb block The environment being quite tiny, we save one 64kb block by embedding the environment in the first 8kb block, hence allowing to increase the monitor size to 320kb. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
* board: MCR3000: cleanup configChristophe Leroy2018-04-061-31/+3
| | | | | | | | | | | | | | | | | | | | Some config is redundant with Kconfig. Fix it. Also remove unused configs Move SDRAM_MAX_SIZE in the only place it is used include/environment.h already defines CONFIG_ENV_SIZE from CONFIG_ENV_SECT_SIZE and defines CONFIG_ENV_ADDR as (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) remove BOOTARGS as bootargs is set by the different boot commands Fix CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE to be in line with CPM DPRAM organisation Remove CONFIG_SYS_GBL_DATA_SIZE, CONFIG_SYS_GBL_DATA_OFFSET and CONFIG_SYS_INIT_SP_OFFSET which are unused Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
* spi: atmel: default y if DM_SPI && ARCH_AT91Jagan Teki2018-04-063-3/+0
| | | | | | | | | ATMEL_SPI is now fully converted to driver-model and respective boards switch to DM_SPI as well, so make default y for ARCH_AT91 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
* spi: atmel: Drop non-dm codeJagan Teki2018-04-062-2/+0
| | | | | | | | All board configs are now enabled DM_SPI for SPL and U-Boot proper, so now its time to drop non-dm code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
* configs: gurnard: Move CONFIG_ATMEL_SPI to defconfigsJagan Teki2018-04-061-2/+0
| | | | | | | | | Now CONFIG_ATMEL_SPI is defined in Kconfig, so move the same into defconfig file. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Wenyou Yang <wenyouya@gmail.com>
* ARC: HSDK: Add platform-specific commandsEugeniy Paltsev2018-04-021-3/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support of hsdk platform-specific commands: hsdk_clock set - set clock from axi_freq, cpu_freq and tun_freq environment variables/command line arguments hsdk_clock get - save clock frequencies to axi_freq, cpu_freq and tun_freq environment variables hsdk_clock print - show CPU, AXI, DDR and TUNNEL current clock frequencies. hsdk_clock print_all - show all currently used clock frequencies. hsdk_init - setup board HW in one of pre-defined configuration (hsdk_hs34 / hsdk_hs36 / hsdk_hs36_ccm / hsdk_hs38 / hsdk_hs38_ccm / hsdk_hs38x2 / hsdk_hs38x3 / hsdk_hs38x4) hsdk_go - run baremetal application on hsdk configured by hsdk_init command. This patch changes default behaviour of 'bootm' command: now we are able to set number of CPUs to be kicked by setting 'core_mask' environment variable before 'bootm' command run. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* Merge git://git.denx.de/u-boot-marvellTom Rini2018-03-301-0/+19
|\
| * arm64: mvebu: a8k: Add distro boot supportMark Kettenis2018-03-301-0/+19
| | | | | | | | | | | | | | | | | | The various load address values are taken from the a37xx configuration and match the dowstream 'u-boot-2017.03-armada-17.10' release where appropriate. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge git://git.denx.de/u-boot-riscvTom Rini2018-03-303-27/+3
|\ \
| * | riscv: ae250: Support DT provided by the board at runtimeRick Chen2018-03-301-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable CONFIG_OF_BOAD to support delivery dtb to u-boot at run time instead of embedded. There are two methods to delivery dtb. 1 Pass from loader: When u-boot boot from RAM, gdb or loader can pass dtb via a2 to u-boot dynamically. Of course gdb or loader shall be in charge of dtb delivery. 2 Configure CONFIG_SYS_FDT_BASE: It can be configured as RAM or ROM base statically, no mater u-boot boot from RAM or ROM. If it was configured as ROM base, dtb can be burned into ROM(spi flash) by spi driver. Meanwhile remove CONFIG_SKIP_LOWLEVEL_INIT which is useless in nx25-ae250 configuration. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
| * | mmc: ftsdc010: Migrate CONFIG_FTSDC010_SDIO to KconfigRick Chen2018-03-303-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert CONFIG_FTSDC010_SDIO to Kconfig. So CONFIG_FTSDC010_SDIO can also be removed from config_whitelist.txt. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
| * | Drop CONFIG_FTSDC010_NUMBERRick Chen2018-03-303-3/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | CONFIG_FTSDC010_NUMBER was not used anymore, can be removed now. So CONFIG_FTSDC010_NUMBER can also be removed from config_whitelist.txt. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
* | rockchip: rk3399: set fdtfileMark Kettenis2018-03-281-0/+1
|/ | | | | | | Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* Merge git://git.denx.de/u-boot-ubiTom Rini2018-03-252-6/+0
|\
View Lorry Controller Status