summaryrefslogtreecommitdiff
path: root/include/configs/zynq-common.h
Commit message (Collapse)AuthorAgeFilesLines
* ARM: zynq: Convert dlc20 and zc70x board to DM_I2CMichal Simek2019-02-141-14/+0
| | | | | | | | | | All these board have also eeprom enabled that's why it is also enabled via defconfig. There is also no need to have zc70x specific config file that's why also remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* arm: zynq: Define distro boot commnads for qspi, nand and norSiva Durga Prasad Paladugu2019-02-141-0/+48
| | | | | | | | | | | | | | | This patch adds distro boot commands for qspi, nand and nor. The distro boot commands now reads the script from flash offset of 15.75MB and executes it. Setup default location via script_offset_f to 15.75MB to match the most xilinx reference boards for qspi, nand and set the same using script_offset_nor to 0xE2EC0000 for nor. 256kB allocated space for script size (script_size_f) should be more than enough to cover custom boot logic. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: Run distribution boot commands firstMichal Simek2019-02-141-1/+8
| | | | | | | | | | | | | This patch is doing two things. 1. Exchanging order of boot commands. distro_bootcmd is run first followed by Xilinx boot command. 2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by creating Xilinx distribution bootcommand and wiring it as the last bootcommand. QSPI, NAND distribution boot command will be added later. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: Enable CONFIG_REMAKE_ELFSiva Durga Prasad Paladugu2019-01-241-0/+2
| | | | | | | | | This patch enables CONFIG_REMAKE_ELF for Zynq platform so that it generates u-boot.elf from binary which works for all Zynq boards with OF_SEPARATE option enabled. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: Setup non zero SPL FIT load addressMichal Simek2018-11-071-0/+2
| | | | | | | | Default setup is 0 which is incorrect place because it points to OCM which is allocated for SPL only in our case. Use address in DDR. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford2018-10-191-4/+0
| | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: zynq: Remove useless comments from config fileMichal Simek2018-09-261-8/+0
| | | | | | Moving options to Kconfig some comments are useless now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Convert CONFIG_MII et al to KconfigAdam Ford2018-08-171-1/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-161-4/+0
| | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynqSiva Durga Prasad Paladugu2018-08-061-2/+0
| | | | | | | | | | This patch moves the the config SYS_MALLOC_LEN to Kconfig. It will be just for Zynq arch and to do will be for all other archs. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* spi: Kconfig: Create ISSI Kconfig entryMichal Simek2018-08-061-1/+0
| | | | | | | Add ISSI to Kconfig to make it selectable via menuconfig. Also convert all current platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Convert CONFIG_MTD_PARTITIONS et al to KconfigAdam Ford2018-07-221-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com>
* env: Added support to save env to spi through KconfigVipul Kumar2018-07-191-13/+0
| | | | | | | | This patch added support to enable CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET and CONFIG_ENV_SECT_SIZE through Kconfig for Zynq and Zynqmp. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* configs: Remove empty #ifdef/#ifndef blocks from configsAlex Kiernan2018-07-101-4/+0
| | | | | | | Remove empty #ifdef/#ifndef..#endif blocks where the configuration they guarded has been completely removed. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* Migrate IMAGE_FORMAT_LEGACY to KconfigAlex Kiernan2018-04-281-3/+0
| | | | | | | This converts IMAGE_FORMAT_LEGACY to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: zynq: Make ENV_SIZE and ENV_OFFSET optional via board fileMichal Simek2018-04-231-2/+6
| | | | | | | | Boards have an option to rewrite variable locations in their own board files. This is necessary for qspi and nand configurations where boot image can be bigger then 896k(current limit). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* xilinx: Only enable dist boot pxe when DHCP is enabledJoe Hershberger2018-04-131-1/+1
| | | | | | | | | | | | | | Otherwise, we see this: In file included from include/configs/zynq-common.h:183:0, from include/config.h:5, from include/common.h:21, from env/common.c:11: include/config_distro_bootcmd.h:319:2: error: expected ?}? before ?BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE? BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE ^ include/config_distro_bootcmd.h:319:2: note: in definition of macro ?BOOTENV_DEV_NAME_PXE? Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* spl: spi: Move CONFIG_SPL_SPI_LOAD to KconfigMarek Vasut2018-04-111-1/+0
| | | | | | | | Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
* mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQVipul Kumar2018-03-011-5/+0
| | | | | | | | | This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEEDVipul Kumar2018-03-011-1/+0
| | | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED and set it to default value 100000. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVEVipul Kumar2018-03-011-1/+0
| | | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE and set it default to 0. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfigVipul Kumar2018-03-011-4/+0
| | | | | | | | | This patch enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPLVipul Kumar2018-02-281-2/+0
| | | | | | | | This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
* Remove config_distro_defaults.hAdam Ford2018-02-231-1/+0
| | | | | | | With the contents of config_distro_defaults.h migrated to Kconfig, we can remove this header file completely Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_BOOTP_BOOTPATH et al to KconfigAdam Ford2018-02-231-6/+0
| | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Migrate CONFIG_SPL_FRAMEWORKTom Rini2018-02-141-1/+0
| | | | | | | | | | Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: Tom Rini <trini@konsulko.com>
* Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to KconfigLukasz Majewski2018-02-021-1/+0
| | | | | | | | This commit moves USB_FUNCTION_THOR config to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblazeTom Rini2018-01-311-5/+1
|\ | | | | | | | | | | | | | | | | | | | | | | Xilinx changes for v2018.03 - Several Kconfig fixes (also moving configs to defconfigs) - Some DTS updates - ZynqMP psu rework based on Zynq concept - Add low level initialization for zc770 and zcu102 - Add support for Zynq zc770 x16 nand configuration - Add mini nand/emmc ZynqMP targets - Some arasan nand changes
| * arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfigVipul Kumar2018-01-301-3/+0
| | | | | | | | | | | | | | | | This patch moved ethernet PHY configs of Zynq boards to respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm: zynq: Update years in copyright to reflect latest changesMichal Simek2018-01-301-1/+1
| | | | | | | | | | | | Updating year in zynq files. Also add missing Copyright to board.c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm: zynq: Move bootcommand to defconfigMichal Simek2018-01-301-1/+0
| | | | | | | | | | | | | | It will cleanup generic config and enable option to change it for every board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | fs: fat: Drop CONFIG_SUPPORT_VFATTuomas Tynkkynen2018-01-221-4/+0
|/ | | | | | | | fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since 2003), so as a result VFAT support is always enabled regardless of whether a board config defines it or not. Drop this unnecessary option. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* arm: zynq: Fix SPL SD boot modeMichal Simek2017-12-141-5/+2
| | | | | | | | | | This patch is fixing two issues: 1. Insufficient stack size for fat fs buffers 2. Insufficient space in malloc area Tested on zc702 and zc706. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: Do not show information from checkboard twiceMichal Simek2017-11-291-3/+0
| | | | | | | There is no reason to show information about board twice. Remove boardinfo late calls. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: Move ZYNQ_SERIAL to KconfigMichal Simek2017-11-281-1/+0
| | | | | | | Move cadence/zynq serial driver via Kconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: zynq: Enable FPGA/FPGA_XILINX via KconfigMichal Simek2017-11-281-3/+0
| | | | | | Enabling fpga via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: Remove empty ifdef env structures from config fileMichal Simek2017-11-281-6/+0
| | | | | | | All these configs were moved to Kconfig that's why this empty ifdef structure is not needed anymore. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* include/configs: drop default definitions of CONFIG_SYS_PBSIZEThomas Petazzoni2017-09-031-2/+0
| | | | | | | | | Now that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* include/configs: remove CONFIG_SYS_CBSIZE when the default value is usedThomas Petazzoni2017-09-031-1/+0
| | | | | | | | | | | Now that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all configurations that were using the default value. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Drop <config.h> from stih410-b2260.h] Signed-off-by: Tom Rini <trini@konsulko.com>
* spl: moveconfig: remove SPL_LDSCRIPT definitions for header-filesPhilipp Tomsich2017-08-131-2/+0
| | | | | | | | | With the hierarchical defaults set up, we remove these from the header files. To do so, I've run moveconfig on SPL_LDSCRIPT and this commits the changes. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_CMD_THOR_DOWNLOAD to KconfigSimon Glass2017-08-111-1/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_THOR_DOWNLOAD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* Convert CONFIG_CMD_SPL to KconfigSimon Glass2017-08-111-1/+0
| | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_SPL Note that trats does not actually use SPL, so this option can no-longer be set. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* zynq: Enable distro bootAlexander Graf2017-08-021-4/+51
| | | | | | | | | | | | | Distro boot allows devices to boot using standardized boot methods by default. This can be very handy for distributions that want to run on different platforms. This patch moves the zynq platform to use its old, zynq specific boot method first and then fall back to distro boot. That way supporting Linux distributions like openSUSE is much easier. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* configs: Migrate CMD_NAND*Tom Rini2017-07-311-1/+0
| | | | | | | | | | Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Convert CONFIG_ENV_IS_IN_SPI_FLASH to KconfigSimon Glass2017-07-251-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_ENV_IS_IN_FLASH to KconfigSimon Glass2017-07-251-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_FLASH Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigSimon Glass2017-07-251-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Kconfig: Migrate FS_FAT / FAT_WRITETom Rini2017-06-031-1/+0
| | | | | | | | Now that these symbols are in Kconfig, migrate all users. Use imply on a number of platforms that default to having this enabled. As part of this we must migrate some straglers for CMD_FAT and DOS_PARTITION. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_CMD_FPGA_LOADBP et al to KconfigSimon Glass2017-05-221-4/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_FPGA_LOADBP CONFIG_CMD_FPGA_LOADFS CONFIG_CMD_FPGA_LOADMK CONFIG_CMD_FPGA_LOADP Signed-off-by: Simon Glass <sjg@chromium.org>
View Lorry Controller Status