summaryrefslogtreecommitdiff
path: root/include/configs/sama5d27_som1_ek.h
Commit message (Collapse)AuthorAgeFilesLines
* Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini2022-06-061-3/+0
| | | | | | | | | | | | | | - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Use CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR directly.Tom Rini2022-06-061-4/+1
| | | | | | | | | | In some cases, we define CONFIG_SYS_INIT_SP_ADDR differently for SPL or full U-Boot. This case should be making use of CONFIG_SPL_STACK, as that's what that variable is for. In a few other cases we define CONFIG_SPL_STACK directly to CONFIG_SYS_INIT_SP_ADDR, but do not need to as the code handles this correctly, normally. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini2022-06-061-1/+0
| | | | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini2022-06-061-1/+0
| | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini2022-06-061-4/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
* include: configs: at91/sam: remove stray #ifdef/#elseEugen Hristev2022-04-261-4/+0
| | | | | | | | | | | | | With the commit that moves the BOOTCOMMAND to Kconfig: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") some stray ifdefs have been left in the header files which are now useless. Clean up the include files to remove these lines. Fixes: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini2021-12-011-5/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
* board: sama5d27_som1_ek: Modify load addressesClément Léger2021-09-211-8/+4
| | | | | | | | When using OP-TEE, address range [0x20000000 - 0x22000000] is reserved. This modification allows to have a system which always work even when OP-TEE is present. Signed-off-by: Clément Léger <clement.leger@bootlin.com>
* Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini2021-08-311-2/+0
| | | | | | | Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
* configs: sama5d27_som1_ek: Set FDT filename based on defconfigGreg Gallagher2021-01-221-5/+2
| | | | | | | Make the FDT file name based on the default on that is specified in the defconfig file. Signed-off-by: Greg Gallagher <greg@embeddedgreg.com>
* Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford2020-07-281-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_BOOTARGS to KconfigTom Rini2020-06-261-6/+0
| | | | | | | This converts the following to Kconfig: CONFIG_BOOTARGS Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_CMD_ASKENV et al to KconfigTom Rini2020-06-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini <trini@konsulko.com>
* at91: configs: Drop duplication of defconfig macrosTudor Ambarus2019-09-301-2/+0
| | | | | | | | | | | | | | | | | 'commit a9221f3ebd6d ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")' migrated CONFIG_ENV_ macros to defconfigs but did not remove the identical redefinition of these macros in include/configs/. Since the duplicated macros have the same value as the ones in defconfigs, no "redefined" warnings were raised. Remove duplicated macros for all sama5 and sam9x5ek boards. While verifying that the removal of the macros from include/configs did not change the same macros in defconfigs, overwrite the old defconfig by saving them with the output from "make arch=ARM savedefconfig". This resulted in the movement of some macros in the defconfig files. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
* Convert CONFIG_SYS_SPI_U_BOOT_OFFS to KconfigWIP/2019-08-24-master-importsHannes Schmelzer2019-08-251-4/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
* moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 2Hannes Schmelzer2019-08-251-1/+1
| | | | | | | | | | some boards have common headers for several individual build-targets where CONFIG_SYS_SPI_U_BOOT_OFFS is defined even it is not needed (only needed if CONFIG_SPL_SPI_LOAD is defined also). Take this define here under '#ifdef CONFIG_SPL_SPI_LOAD' for having a clean run of moveconfig.py Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
* configs: sama5d27_som1_ek: qspi: use common memory layoutTudor Ambarus2019-07-091-7/+0
| | | | | | | Use the qspi memory layout defined in at91-sama5_common - it aligns with the 8 Mbyte flash (sst26vf064b-104i/sn) available in sama5d27_som1_ek. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
* configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt2019-04-291-1/+0
| | | | | | | | | Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay2019-03-251-1/+0
| | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* configs: sama5d27_som1_ek: Add defconfig for ENV/boot from uSDCodrin Ciubotariu2018-09-251-2/+2
| | | | | | | | | This adds a defconfig for sama5d27_som1_ek board to get environment from uSD. The defconfig is made from sama5d27_som1_ek_mmc_defconfig, with 'bootcmd' and 'bootargs' changed to kernel, device-tree and rootfs from uSD. The environment is expected to be found in uSD's FAT partition. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
* configs: sama5d27_som1_ek: Set CONFIG_BOOTARGS using KconfigCodrin Ciubotariu2018-09-251-3/+0
| | | | | | | CONFIG_BOOTARGS can be set using Kconfig, so we no longer need it in the config files. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
* configs: sama5d27_som1_ek: Remove unnecessary FAT_ENV_xxx macrosCodrin Ciubotariu2018-09-251-3/+0
| | | | | | | FAT_ENV_xxx options can now be set using Kconfig, so we no longer need them in the config files. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
* Convert CONFIG_MISC_INIT_R to KconfigAdam Ford2018-08-171-2/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-161-1/+0
| | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* spl: spi: Move CONFIG_SPL_SPI_LOAD to KconfigMarek Vasut2018-04-111-1/+0
| | | | | | | | Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
* configs: Migrate CONFIG_SPL_FRAMEWORKTom Rini2018-02-141-1/+0
| | | | | | | | | | Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Migrate CONFIG_SYS_TEXT_BASETom Rini2018-02-111-2/+0
| | | | | | | | | | | On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
* board: atmel: Add SAMA5D27 SOM1 EK boardWenyou Yang2017-09-141-0/+92
The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
View Lorry Controller Status