summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: meson: Add GXL SupportNeil Armstrong2017-11-173-0/+741
| | | | | | | | Add the Amlogic Meson GXL pinctrl support based on the GXBB driver and the synchronized DTS from Linux 4.13.5 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Beniamino Galvani <b.galvani@gmail.com>
* Merge git://www.denx.de/git/u-boot-marvellTom Rini2017-11-162-4/+5
|\
| * mvebu: usb: xhci: a38x supportJon Nettleton2017-11-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | This makes the initial changes need to support the a38x series of SOCs. It adds the device-tree identifier as well as changing the board_support function to take the IO address designated by device-tree. Signed-off-by: Jon Nettleton <jon@solid-run.com> [baruch: use fdt_addr_t; update 37xx and 8K implementations] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
| * pci: mvebu: Increase size of PCIe default mappingVlaoMao2017-11-161-2/+2
| | | | | | | | | | | | | | Increase size PCI memory mapping from 32MiB to 128MiB. Signed-off-by: VlaoMao <vlaomao@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | driver: net: fsl-mc: Use base 16 in simple_strtoulPrabhakar Kushwaha2017-11-151-1/+1
| | | | | | | | | | | | | | | | Value provided in MC_MEM_SIZE_ENV_VAR is in hex. Use 16 as base in simple_strtoul. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | mtd: nand: fsl-ifc: fix support of multiple NAND devicesKurt Kanzenbach2017-11-141-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the chipselect used to identify the corresponding NAND chip is stored at the controller and only set during fsl_ifc_chip_init(). This way, only the last NAND chip is working, as the previous value of cs_nand gets overwritten. In order to solve this issue the chipselect is computed on demand by evaluating the bank variable. Thus, the correct chipselect for each NAND chip operation is used. Tested on hardware with two NAND chips connected to the IFC controller. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Scott Wood <oss@buserror.net> [YS: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* | drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()Ashish Kumar2017-11-141-1/+1
|/ | | | | | | | | | The zero value returned from qbman_swp_acquire() is an error condition meaning no free buffer for allocation. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kushwaha Prabhakar <prabhakar@freescale.com> [YS: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* net: sun8i_emac: Fix build for non-H3/H5 SoCsChen-Yu Tsai2017-11-101-0/+3
| | | | | | | | | | | | | Only the H3/H5 SoCs have an internal PHY and its related clock and reset controls. Use an #ifdef to guard the internal PHY control code block so it can be built for other SoCs, such as the A83T or A64. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-11-093-6/+13
|\
| * sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC usersArtturi Alm2017-11-091-0/+1
| | | | | | | | | | | | | | | | | | due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h, likely missed in: commit 3146f0c017df ("Move PHYLIB to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: fix CONFIG_SUNXI_EMAC referencesArtturi Alm2017-11-091-1/+1
| | | | | | | | | | | | | | | | | | fixes CONFIG_SUNXI_EMAC references from drivers/net/Makefile and include/configs/sunxi-common.h likely forgotten in: commit abc3e4df59f5 ("sunxi: Convert SUNXI_EMAC to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * video: sunxi: de2: fix SimpleFB node creation when HDMI not initializedIcenowy Zheng2017-11-061-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | When HDMI is not initialized (e.g. no monitor is plugged), the current SimpleFB code will still create a broken SimpleFB node. Detect whether HDMI is initialized when creating SimpleFB node. Fixes: be5b96f0e411 ("sunxi: setup simplefb for Allwinner DE2") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | mmc: fsl_esdhc: Fix PIO timeoutBenoît Thébaudeau2017-11-071-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following error has been observed on i.MX25 with a high-speed SDSC card: Data Write Failed in PIO Mode. It was caused by the timeout set on PRSSTAT.BWEN, which was triggered because this bit takes 15 ms to be set after writing the first block to DATPORT with this card. Without this timeout, all the blocks are properly written. This timeout was implemented by decrementing a variable, so it was depending on the CPU frequency. Fix this issue by setting this timeout to a long enough absolute duration (500 ms). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | tpm: st33zp24: fix STMicroelectronics copyrightPatrice Chotard2017-11-062-2/+4
| | | | | | | | | | | | Uniformize STMicroelectronics copyrights header Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | stm32: fix STMicroelectronics copyrightPatrice Chotard2017-11-069-18/+19
| | | | | | | | | | | | | | Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | sti: fix STMicroelectronics copyrightPatrice Chotard2017-11-068-17/+19
|/ | | | | | | Uniformize all STMicroelectronics copyrights headers for STi related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* scsi: ceva: Start port in probeMichal Simek2017-11-031-1/+6
| | | | | | | | | | | | The patch: "dm: ahci: Unwind the confusing init code" (sha1: 7cf1afce7fa3fe64189020fe14b93f7326dd0758) introduce bug for ceva sata because port didn't start. On the other hand the dwc_ahci.c was fixed correctly. Do the same change for ceva too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
* rockchip: rk3399: init CPU clock when rkclk_init()Kever Yang2017-11-011-78/+79
| | | | | | | | | | | Init the CPU and its buses to speed up the boot time. Move rkclk_init() to a place after rk3399_configure_cpu has defined at the same time, or else there will be a warning. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* net: fec_mxc: Change "error frame" message to debug levelFabio Estevam2017-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Jonathan Gray: "After the recent changes to add SimpleNetworkProtocol to efi_loader when booting off mmc via an efi payload that doesn't use SimpleNetworkProtocol U-Boot's fec_mxc driver will now display various "error frame" messages. .... MMC Device 1 not found MMC Device 2 not found MMC Device 3 not found Scanning disks on sata... Found 6 disks reading efi/boot/bootarm.efi 67372 bytes read in 32 ms (2 MiB/s) ## Starting EFI application at 12000000 ... >> OpenBSD/armv7 BOOTARM 1.0 error frame: 0x8f57ec40 0x00003d74 error frame: 0x8f57ec40 0x00007079 error frame: 0x8f57ec40 0x00006964 error frame: 0x8f57ec40 0x00006f6f error frame: 0x8f57ec40 0x0000726f error frame: 0x8f57ec40 0x00002074 error frame: 0x8f57ec40 0x00006f6f" Heinrich Schuchardt explains: "A receive FIFO overrun can be expected if network packages are not processed. With the network patches we check if a package is available quite often." Move the "error frame" messages to debug level so that a clean output log can be seen. Reported-by: Jonathan Gray <jsg@jsg.id.au> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* Merge git://git.denx.de/u-boot-videoTom Rini2017-10-2916-187/+983
|\
| * exynos: video: fix typo in DisplayPort driverDongjin Kim2017-10-291-1/+1
| | | | | | | | | | | | Signed-off-by: Dongjin Kim <tobetter@gmail.com> CC: Simon Glass <sjg@chromium.org> CC: Minkyu Kang <mk7.kang@samsung.com>
| * video/da8xx-fb: Cache-align memory allocationsNiko Mauno2017-10-291-4/+4
| | | | | | | | | | | | | | Resort to malloc_cache_aligned() rather than malloc() which also removes 'CACHE: Misaligned operation at range' warnings. Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
| * sunxi: video: add LCD support to DE2 driverVasily Khoruzhick2017-10-273-1/+170
| | | | | | | | | | | | | | | | | | Extend DE2 driver with LCD support. Tested on Pinebook which is based on A64 and has ANX6345 eDP bridge with eDP panel connected to it. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: rebased v5 on u-boot-video/master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * sunxi: video: split out PLL configuration codeVasily Khoruzhick2017-10-272-116/+129
| | | | | | | | | | | | It will be reused in new DM LCD driver. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
| * video: add anx6345 DM driverVasily Khoruzhick2017-10-263-0/+435
| | | | | | | | | | | | | | | | | | This is a eDP bridge similar to ANX9804, it allows to connect eDP panels to the chips that can output only parallel signal Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: fixed most checkpatch errors/warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * video: anx9804: split out registers definitions into a separate headerVasily Khoruzhick2017-10-262-53/+99
| | | | | | | | | | | | | | | | This header will be used in anx6345 driver Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: moved header to drivers/video] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: bridge: add operation to read EDIDVasily Khoruzhick2017-10-261-0/+10
| | | | | | | | | | | | | | Add an operation to read EDID, since bridge may have ability to read EDID from the panel that is connected to it, for example LCD<->eDP bridge. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
| * sunxi: setup simplefb for Allwinner DE2Icenowy Zheng2017-10-262-1/+73
| | | | | | | | | | | | | | | | | | | | As the support of EFI boot on Allwinner H3 is broken, we still need to use simplefb to pass the framebuffer to Linux. Add code to setup simplefb for Allwinner DE2 driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * video: add an option for video simplefb via DTIcenowy Zheng2017-10-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Add an option to indicate that the video driver should setup a SimpleFB node that passes the video framebuffer initialized by U-Boot to the operating system kernel. Currently only the Allwinner DE driver uses this option, and the definition of this option in the sunxi-common.h config header is converted to an imply of this option from CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * video: sunxi: extract simplefb match code to a new fileIcenowy Zheng2017-10-264-12/+55
| | | | | | | | | | | | | | | | | | As the DE2 simplefb setup code can also benefit from the simplefb match code, extract it to a new source file. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-10-273-20/+29
|\ \
| * | usb: host: Move CONFIG_XHCI_FSL to KconfigRan Wang2017-10-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | use Kconfig to select xhci accordingly. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_IDAshish Kumar2017-10-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID PHY_INTERFACE_MODE_RGMII_TXID. These change where introduced in phy driver in commit 05b29aa0cb68 ("net: phy: realtek: fix enabling of the TX-delay for RTL8211F"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | driver: fsl-mc: use calloc instead mallocPrabhakar Kushwaha2017-10-271-18/+21
| | | | | | | | | | | | | | | | | | | | | | | | Memory allocated via malloc is not guaranteed to be zeroized. So explicitly use calloc instead of malloc. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | i2c: fti2c010: remove unused/unmaintained driverMasahiro Yamada2017-10-273-421/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_I2C_FTI2C010 is not enabled by anyone. Commit 2852709676c8 ("dm: i2c: Add a note to I2C drivers which need conversion") prompted to convert this driver to DM before June 2017, but not converted yet. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher <hs@denx.de>
* | | i2c: adi_i2c: remove left-over Blackfin I2C driverMasahiro Yamada2017-10-272-310/+0
| | | | | | | | | | | | | | | | | | | | | | | | This driver was used by Blackfin boards, but Blackfin support is gone. There is no user of this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher <hs@denx.de>
* | | Merge git://git.denx.de/u-boot-x86Tom Rini2017-10-272-0/+23
|\ \ \
| * | | spi: ich: Lock down controller settings if requiredBin Meng2017-10-272-0/+23
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Intel FSP (like Braswell) does SPI lock-down during the call to fsp_notify(INIT_PHASE_BOOT). But before SPI lock-down is done, it's bootloader's responsibility to configure the SPI controller's opcode registers properly otherwise SPI controller driver doesn't know how to communicate with the SPI flash device. Rather than passively doing the opcode configuration, let's add a simple DTS property "intel,spi-lock-down" and let the driver call the opcode configuration function if required by such FSP. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | SPL: SPI: select SPL_SPI_FLASH_SUPPORT on SPL_SPI_SUNXIAndre Przywara2017-10-251-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | The Allwinner SPI flash SPL boot support is guarded by the SPL_SPI_SUNXI symbol. But despite its generic name, the actual only use case for this is to provide SPI flash support to the SPL, which requires CONFIG_SPL_SPI_FLASH_SUPPORT to be defined. Select this symbol from the SPL_SPI_SUNXI Kconfig definition. This avoids doing this explicitly in the defconfig, and fixes SPI booting on the Pine64 SoPine (and -LTS version) and the OrangePi Win board (both with SPI flash). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | rtc: mc146818: Correct alarm message for day alarmBin Meng2017-10-231-1/+1
| | | | | | | | | | | | | | RTC_CONFIG_D register contains the day within the month to generate an alarm, not the month. This corrects the printf to indicate it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | simple-bus: remove DECLARE_GLOBAL_DATA_PTRMasahiro Yamada2017-10-231-2/+0
| | | | | | | | | | | | | | No global pointer is used in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | mtd: replace MTDDEBUG() with pr_debug()Masahiro Yamada2017-10-236-59/+51
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In old days, the MTD subsystem in Linux had debug facility like DEBUG(MTD_DEBUG_LEVEL1, ...). They were all replaced with pr_debug() until Linux 3.2. See Linux commit 289c05222172 ("mtd: replace DEBUG() with pr_debug()"). U-Boot still uses similar macros. Covert all of them for easier sync. Done with the help of Coccinelle. The semantic patch I used is as follows: // <smpl> @@ expression e1, e2; @@ -MTDDEBUG(e1, e2) +pr_debug(e2) @@ expression e1, e2; @@ -MTDDEBUG(e1, e2, +pr_debug(e2, ...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* net: Add SMC911X driver to Kconfig, convertAdam Ford2017-10-201-0/+28
| | | | | | | | | | | | | We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to KconfigAdam Ford2017-10-201-1/+54
| | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-i2cTom Rini2017-10-182-13/+6
|\
| * i2c: stm32f7_i2c: fix usage of useless local variablePatrice Chotard2017-10-171-8/+2
| | | | | | | | | | | | | | Remove useless local variable "s" and use directly function's parameter "output" Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
| * i2c: stm32f7_i2c: fix data abortChristophe Kerello2017-10-171-10/+11
| | | | | | | | | | | | | | | | | | | | As "v" is a local variable in stm32_i2c_choose_solution() "v" has to be copied into "s" to avoid data abort in stm32_i2c_compute_timing(). Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
| * i2c: remove DECLARE_GLOBAL_DATA_PTR from i2c-uclassMasahiro Yamada2017-10-171-2/+0
| | | | | | | | | | | | | | No global pointer is used in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | Merge git://git.denx.de/u-boot-spiTom Rini2017-10-182-7/+65
|\ \ | |/ |/|
| * sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operationLukasz Majewski2017-09-271-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The content of Bank Address Register (BAR) is volatile. It is cleared after power cycle or reset command (RESET F0h). Some memories (like e.g. s25fl256s) use it to access memory larger than 0x1000000 (16 MiB). The problem shows up when one: 1. Reads/writes/erases memory > 16 MiB 2. Calls "reset" u-boot command (which is not causing BAR to be cleared) In the above scenario, the SoC ROM sends 0x000000 address to read SPL. Unfortunately, the BA24 bit is still set and hence it receives content from 0x1000000 (16 MiB) memory address. As a result the SoC aborts and we hang. Only power cycle can take the SoC out of this state. How to reproduce/test: sf probe; sf erase 0x1200000 0x800000; reset sf probe; sf erase 0x1200000 0x800000; sf write 0x11000000 0x1200000 0x800000; reset sf probe; sf read 0x11000000 0x1200000 0x800000; reset Signed-off-by: Lukasz Majewski <lukma@denx.de> [Fixed comment text on clean_bar function] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
View Lorry Controller Status