summaryrefslogtreecommitdiff
path: root/drivers/net/e1000.c
Commit message (Collapse)AuthorAgeFilesLines
* net: e1000: Add missing address translationsStefan Roese2021-01-271-5/+5
| | | | | | | | | | | | | | Add some missing address translations from virtual address in local DRAM to physical address, which is needed for the DMA transactions to work correctly. This issue was detected while testing the e1000 driver on the MIPS Octeon III platform, which needs address translation. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
* net: e1000: Use virt_to_phys() instead of pci_virt_to_mem()Stefan Roese2021-01-271-7/+1
| | | | | | | | | | | | | | | | | Using (dm_)pci_virt_to_mem() is incorrect to translate the virtual address in local DRAM to a physical address. The correct macro here is virt_to_phys() so switch to using this macro. As virt_to_bus() is now not used any more, this patch also removes both definitions (DM and non-DM). This issue was detected while testing the e1000 driver on the MIPS Octeon III platform, which needs address translation. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
* net: e1000: Remove unused bus_to_phys() macroStefan Roese2021-01-271-2/+0
| | | | | | | | | | bus_to_phys() is defined but not referenced at all. This patch removes it completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
* net: e1000: implement eth_write_hwaddr for DM_ETHIan Ray2021-01-191-3/+14
| | | | | | | | | Implement programming MAC address to the hardware also for device model configuration. Fixes: b565b18a294f ("board: ge: bx50v3: Enable DM for PCI and ethernet") Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass2020-12-131-3/+3
| | | | | | Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass2020-12-131-1/+1
| | | | | | | | | | We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass2020-12-131-2/+2
| | | | | | | | | | | | This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: e1000: add defaults for i210 TX/RX PBSIZEChristian Gmeiner2020-10-141-0/+5
| | | | | | | | | | | | | | | | | Set the defaults on probe for the packet buffer size registers for the i210. The TX/RX PBSIZE register of the i210 resets to its default value only at power-on - see Intel Ethernet Controller I210 Datasheet rev 3.5 chapter 8.3 'Internal Packet Buffer Size Registers'. If something (another driver, another OS, etc.) modifies this register from its default value, the e1000 driver doesn't function correctly. It detects a hang of the transmitter and continuously resets the adapter. Here we set this value to its default when resetting the i210 to resolve this issue. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
* treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada2020-07-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* common: Drop linux/delay.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop log.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* command: Remove the cmd_tbl_t typedefSimon Glass2020-05-181-2/+3
| | | | | | | | | | | | | We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop net.h from common headerSimon Glass2020-05-181-0/+2
| | | | | | | | | | | Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: core: Create a new header file for 'compat' featuresSimon Glass2020-02-051-0/+1
| | | | | | | | | | | | At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Move ARM cache operations out of common.hSimon Glass2019-12-021-0/+1
| | | | | | | | | These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* net: e1000: Fix e1000_igb semaphore handlingBernhard Messerklinger2018-02-261-1/+1
| | | | | | | | Fix commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM"). Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: e1000: implement eth_write_hwaddrHannu Lounento2018-02-041-0/+40
| | | | | | | | | | | | | Implement programming MAC address to the hardware, i.e. external flash seen as EEPROM. MAC address is only written if it differs from what is already stored in flash or if reading the current MAC address fails. Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> CC: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
* net: e1000: split e1000_read_mac_addrHannu Lounento2018-02-041-18/+63
| | | | | | | | | | | | | | | Split the implementation of e1000_read_mac_addr into eeprom and register versions called by e1000_read_mac_addr. This allows for calling e1000_read_mac_addr when MAC address is needed with no constraints where it is read from, and for calling the register and, especially, the eeprom version directly in order to specify where to read the address from. Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> CC: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
* net: e1000: add support for writing to EEPROMHannu Lounento2018-02-041-2/+171
| | | | | | | | | | | | | | Port functions for writing to EEPROM, updating the checksum and committing data to flash from the Linux kernel igb driver. Functions were ported from Linux 4.8-rc2 (694d0d0bb20). Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> CC: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
* net: e1000: fix indentationAndre Przywara2016-12-041-3/+2
| | | | | | | | | | | Apparently the indentation is off here, for the IGB model just want to bail out early. Fix this to avoid both compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: e1000: Fix the build with driver model and SPI EEPROMAlban Bedel2016-08-151-1/+5
| | | | | | | | | When adding support for the driver model the SPI EEPROM feature had been ignored. Fix the build with both CONFIG_DM_ETH and CONFIG_E1000_SPI enabled. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2016-02-081-1/+1
|\
| * Use correct spelling of "U-Boot"Bin Meng2016-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* | net: e1000: Convert to use DM PCI APIBin Meng2016-02-051-1/+74
|/ | | | | | | Update this driver to use proper DM PCI APIs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-netTom Rini2016-01-131-76/+1
|\
| * net: e1000: Remove CONFIG_MVBC_1GBin Meng2015-12-211-2/+0
| | | | | | | | | | | | | | CONFIG_MVBC_1G is not referenced anywhere, hence remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: e1000: Remove dead codes wrapped by #if 0Bin Meng2015-12-211-74/+1
| | | | | | | | | | | | | | Remove those dead codes wrapped by #if 0 and #endif. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | dm: pci: Add a dm_ prefix to pci_get_bdf()Simon Glass2016-01-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Most driver model PCI functions have a dm_ prefix. At some point, when the old code is converted to driver model and the old functions are removed, we will drop that prefix. For consistency, we should use the dm_ prefix for all driver model functions. Update pci_get_bdf() accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | net: e1000: use correct helper to do endianness conversionMiao Yan2016-01-041-2/+2
|/ | | | | | | | | | | In struct e1000_rx_desc, field 'length' is declared as uint16_t, so use le16_to_cpu() to do endianness conversion. Also drop conversion on 'status' which is declared as uint8_t. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass2015-09-111-0/+1
| | | | | | | Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: e1000: Fix build warnings for 32-bitBin Meng2015-08-261-4/+5
| | | | | | | | | | | | | | | | commit 6497e37 "net: e1000: Support 64-bit physical address" causes compiler warnings on 32-bit U-Boot build below. drivers/net/e1000.c: In function 'e1000_configure_tx': drivers/net/e1000.c:4982:2: warning: right shift count >= width of type [enabled by default] drivers/net/e1000.c: In function 'e1000_configure_rx': drivers/net/e1000.c:5126:2: warning: right shift count >= width of type [enabled by default] This commit fixes the build warnings. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: e1000: Add Kconfig optionsSimon Glass2015-08-211-7/+0
| | | | | | | Add Kconfig options in preparation for moving boards to use Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: e1000: Convert to driver modelSimon Glass2015-08-211-0/+137
| | | | | | | | | Update this driver to support driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Apalis T30 2GB on Apalis Evaluation Board
* net: e1000: Prepare for driver model conversionSimon Glass2015-08-211-200/+244
| | | | | | | | | | | | | | | Since struct eth_device does not exist with CONFIG_DM_ETH defined, avoid using it in the driver unless necessary. Most of the time it is better to pass the private driver pointer anyway. Also refactor the code so that code that the driver model implementation will share are available in functions that can be called. Add stubs where necessary. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Apalis T30 2GB on Apalis Evaluation Board
* net: e1000: Move #include of common.h to the C filesSimon Glass2015-08-211-0/+1
| | | | | | | | | | | We cannot currently include any header files in the C files since common.h needs to be included first, and it is in the header file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Apalis T30 2GB on Apalis Evaluation Board
* net: e1000: Support 64-bit physical addressMingkai Hu2015-08-211-4/+4
| | | | | | | | | High 32-bit address is needed when u-boot runs in 64-bit space. Tested on armv8-based LS2085ARDB. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: e1000: Increase autoneg timeout to 8 secondsStefan Roese2015-08-121-1/+1
| | | | | | | | | | | The current 4.5 timeout for the autonegotiation are not enough to complete it on my platform. Using the Intel E1000 PCIe card in the Marvell db-mv784mp-gp eval board. So lets increase the timeout to 8 seconds. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org>
* e1000: remove unnecessary clearing of SWSM.SWSM_SMBITim Harvey2015-08-111-4/+0
| | | | | | | | | | | | | | | | | | | | | remove unnecessary clearing of SWSM.SWSM_SMBI when obtaining the SW semaphore. This was introduced in 951860634fdb557bbb58e0f99215391bc0c29779 while adding i210 support and should be now resolved by releasing the semaphore when no longer needed. Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Marek Vasut <marex@denx.de> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* Revert "e1000: fix sw fw sync on igb i210/i211"Tim Harvey2015-08-111-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 17da7120249bfdef877f46be5bbcb3cc01212eb9. The i210/i211 do have the SW_FW_SYNC (0x5b5c) register and this is what should be used when acquiring the semaphore. I believe the issue that this patch was trying to resolve is now resolved by properly releasing the semaphore once no longer needed. Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Marek Vasut <marex@denx.de> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* e1000: releasing semaphore once no longer neededTim Harvey2015-08-111-0/+22
| | | | | | | | | | | | | | | | | | | | Once the hwsw semaphore is acquired, it must be released when access to the hw is completed. Without this subsequent calls to acquire will timeout obtaining the semaphore. Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Marek Vasut <marex@denx.de> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* drivers/net/e1000.c: Cleanup whitespaceMinghuan Lian2015-04-231-4/+4
| | | | | | | | | The patch removes unnecessary whitespace to fix checkpatch's warning: unnecessary whitespace before a quoted newline Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net: cosmetic: Fix var naming net <-> eth driversJoe Hershberger2015-04-181-1/+1
| | | | | | | | | | | | | | | Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: cosmetic: Name ethaddr variables consistentlyJoe Hershberger2015-04-181-1/+1
| | | | | | | | Use "_ethaddr" at the end of variables and drop CamelCase. Make constant values actually 'const'. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* drivers/net/e1000.c: fix compile warning under 64bit modeMinghuan Lian2015-01-301-14/+17
| | | | | | | Fix this: warning: cast from pointer to integer of different size Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
* e1000: add i211 and unprogrammed i210/i211 supportMarcel Ziswiler2014-10-281-0/+6
| | | | | | | This patch adds support for i211 as well as unprogrammed aka tools only i210/i211 chip support. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* e1000: fix sw fw sync on igb i210/i211Marcel Ziswiler2014-10-271-2/+4
| | | | | | | | | I finally had a look at the datasheet and spotted an additional register address difference between regular E1000 and i210/i211 chips. This patch fixes this and now successfully works on programmed i210/i211 as well as unprogrammed i211. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* net/e1000: Fix EEPROM access errorYork Sun2014-10-271-1/+1
| | | | | | | | | | | | Commit 951860634fdb557bbb58e0f99215391bc0c29779 may have changed the logic unintentially from "if (!(swfw_sync & (fwmask | swmask)))" to "if ((swfw_sync & swmask) && !(swfw_sync & fwmask))". This change breaks some e1000 NIC with a message "ERROR: Unable to read EEPROM!". Signed-off-by: York Sun <yorksun@freescale.com> CC: Marek Vasut <marex@denx.de> CC: Tim Harvey <tharvey@gateworks.com> Acked-by: Marcel Ziswiler <marcel@ziswiler.com>
* e1000: fix no nvm buildMarcel Ziswiler2014-09-241-0/+2
| | | | | | | | | | | Fix the following build error in case CONFIG_E1000_NO_NVM is enabled: CC drivers/net/e1000.o drivers/net/e1000.c: In function ‘e1000_initialize’: drivers/net/e1000.c:5365:5: error: ‘struct e1000_hw’ has no member named ‘eeprom_semaphore_present’ make[1]: *** [drivers/net/e1000.o] Error 1 make: *** [drivers/net] Error 2 Acked-by: Marek Vasut <marex@denx.de>
* e1000: add i210 supportMarek Vasut2014-08-211-27/+168
| | | | | | | Add i210 support to the e1000 driver. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com>
View Lorry Controller Status