summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common placeTom Rini2019-04-128-0/+8
| | | | | | | | | | | | | The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific notion but rather "where is our previous stage loaded in memory?" option. Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for our HS builds that are not using SPL anyhow. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com?
* configs: am335x_evm: Update VCI StringFaiz Abbas2019-04-121-1/+1
| | | | | | | Update VCI string to keep it compatible with legacy test setups. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: am335x_evm: Add Support for SPL_ETHFaiz Abbas2019-04-121-0/+1
| | | | | | Add Support for booting from Ethernet. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
* configs: am335x_evm: Reduce size of SPLFaiz Abbas2019-04-121-1/+4
| | | | | | Make some room in SPL by getting rid of unnecessary configs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
* configs: am65x_evm_a53: Enable CONFIG_OF_BOARD_SETUPLokesh Vutla2019-04-121-0/+1
| | | | | | | Enable CONFIG_OF_BOARD_SETUP so that msmc sram dt nodes are updated correctly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* configs: ti_omap5_common: Add NAND environment settingsFaiz Abbas2019-04-122-2/+6
| | | | | | | | Now that NAND is supported on DRA71x include various NAND environment settings Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: dra71x-evm: Add Support for NANDFaiz Abbas2019-04-122-0/+6
| | | | | | Add NAND support to dra71x-evm defconfig Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
* ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATAAdam Ford2019-04-122-2/+11
| | | | | | | | | | With the memory mapping giving us some more avialable RAM, this updates the da850-evm-u-boot.dtsi to include the serial port, SPI and Flash nodes along with some dependent nodes in the SPL dtb. This also removes the platform data initialization code for the serial port and SPI Flash. Signed-off-by: Adam Ford <aford173@gmail.com>
* am335x, guardian: Add support for the bosch guardian boardSjoerd Simons2019-04-121-0/+90
| | | | | | | | | | | | | | | | Add support for the Bosch Guardian board. CPU : AM335X-GP rev 2.1 Model: Bosch AM335x Guardian I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Felix Brack <fb@ltec.ch>
* am57xx_evm_defconfig: Enable configs to support QSPI bootVignesh R2019-04-121-0/+4
| | | | | | | | | | AM57xx IDK EVMs can boot out of QSPI. Enable configs to support QSPI boot. Also enable configs for updating QSPI boot images over DFU. Tested on AM572x IDK EVM. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* k2g: config enable ti phy dp83867 for k2gMurali Karicheri2019-04-121-0/+1
| | | | | | | | Enable ti phy dp83867 for k2g Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* configs: am65x_evm_a53: Enable DMA related configsGrygorii Strashko2019-04-111-1/+3
| | | | | | | | Enable TI K3 AM65x PSI-L, Ring Accelerator and UDMA drivers Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2019-04-116-8/+79
|\ | | | | | | - Various rmobile fixes
| * ARM: rmobile: Add R8A77965 M3NULCB supportMarek Vasut2019-04-093-2/+69
| | | | | | | | | | | | | | Add defconfig and board specific adjustments for the R8A77965 M3N ULCB. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: rmobile: Enable multi-DTB fit LZO compressionMarek Vasut2019-04-095-6/+10
| | | | | | | | | | | | | | | | | | | | Enable LZO compression of the multi-DTB fitImages, since the U-Boot with multiple DTs enabled is becoming quite large and the DTs can be well compressed. The LZO compression saves almost 200 kiB on the Salvator-X(S) and ULCB targets. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge tag 'u-boot-atmel-2019.07-a' of git://git.denx.de/u-boot-atmelTom Rini2019-04-094-9/+120
|\ \ | | | | | | | | | First set of u-boot-atmel features and fixes for 2019.07 cycle
| * | arm: at91: Add gardena-gateway-at91sam supportStefan Roese2019-04-091-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GARDENA smart Gateway boards are equipped with an Atmel / Microchip AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. This patch adds support for this board including SPL support. Therefore the AT91Boostrap is not needed on this platform any more. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * | arm: at91: Remove CONFIG_AT91_HW_WDT_TIMEOUTStefan Roese2019-04-092-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the CONFIG_AT91_HW_WDT_TIMEOUT as its not needed any more. The WD timeout value can be provided via the "timeout-sec" DT property. If not provided this way, the default value of 2 seconds will be used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com>
| * | board: pm9g45: Migrate to CONFIG_DMIlko Iliev2019-04-091-7/+37
| |/ | | | | | | | | | | | | | | | | | | | | Migrate the following options to CONFIG_DM: CONFIG_DM_GPIO CONFIG_DM_MMC CONFIG_DM_ETH CONFIG_DM_SERIAL CONFIG_DM_USB Signed-off-by: Ilko Iliev <iliev@ronetix.at>
* | riscv: ax25: Add platform-specific Kconfig optionsRick Chen2019-04-082-2/+0
|/ | | | | | | | | | | Add ax25 RISC-V platform-specific Kconfig options, to include CPU and timer drivers. Also disable ATCPIT100 SoC timer and replace by PLMT. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
* configs: khadas_vim2: Fix defconfigNeil Armstrong2019-04-031-0/+3
| | | | | | | | The Khadas VIM2 defconfig was missing the USB PHY config and two other misc configs to setup dram banks and call misc_init_r. Align it on the other Amlogic SoC based boards defconfig. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2019-04-011-0/+3
|\ | | | | | | Minor fixes for the Alt board and PHY use on Gen2.
| * ARM: rmobile: alt: Synchronize defconfigMarek Vasut2019-03-301-0/+3
| | | | | | | | | | | | | | | | Synchronize the R8A7794 Alt defconfig, enable DM SPI, DM SPI FLASH and I2C driver support. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | configs: icorem6: Use imx6 cratch register for bootcountJagan Teki2019-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | SRAM address used for bootcount on exiting code is erasing previous count value when system reset from Linux. So use the dedicated imx6 scratch register, GPR2 to preserve the contents even if the system reset from Linux. Fixes: 4eb9aa39350e ("configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter") Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | configs: icore: Fix U-Boot proper loading from nandMichael Trimarchi2019-03-312-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | SPL on Engicam i.Core M6 boards enabled DM, so it would require some malloc() pool before relocation in order to load U-Boot proper properly. So, enable SPL malloc() pool of 0x2000 size similarly like what we have used for icore mmc defconfigs. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* | ARM: imx6q_logic: Enable UUID supportAdam Ford2019-03-311-0/+1
|/ | | | | | | | With UUID support, the root can now point to UUID. This makes swiching between mmc 0 and mmc 1 easier by simplying changing mmcdev between 0 and 1. From there, the scripts handle the rest. Signed-off-by: Adam Ford <aford173@gmail.com>
* Merge tag 'arc-last-minute-for-2019.04' of git://git.denx.de/u-boot-arcTom Rini2019-03-282-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | This is last minute change which fixes problems in runtime on AXS10x board caused by some changes in NAND framework and tiny documentation improvement. Anyways NAND flash storage was never really used on the board for various reasons and now we decided to drop it for good. Note this change only touches 1 ARC board so that should be safe for others. As usual - build tested in TravisCI, see https://travis-ci.org/abrodkin/u-boot/builds/512041342
| * ARC: AXS10x: drop NAND supportEugeniy Paltsev2019-03-282-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On AXS10x boards we have non-standard NAND controller which was never really used a lot as there're other much more convenient [as they are standard & removable] persistent media like SD-card and USB mass storage. Moreover after recent changes we face with some NAND controller runtime issues. So instead of keeping support of yet another non-standard peripheral we're dropping its support for good. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2019-03-261-1/+0
|\ \ | |/ |/| | | - configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF
| * configs: Stratix10: Remove CONFIG_USE_TINY_PRINTFLey Foon Tan2019-03-251-1/+0
| | | | | | | | | | | | Use full printf instead of tiny printf in SPL. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
* | Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay2019-03-2563-1/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | Convert CONFIG_DEFAULT_SPI_* to KconfigPatrick Delaunay2019-03-259-0/+14
| | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay2019-03-25443-0/+772
| | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | controlcenterdc: move some configuration in defconfig filePatrick Delaunay2019-03-251-0/+2
| | | | | | | | | | | | | | | | | | | | Move some configurations in defconfig file - CONFIG_CMD_I2C - CONFIG_CMD_SPI This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | bcm7445: move some configuration in defconfig filePatrick Delaunay2019-03-251-0/+3
|/ | | | | | | | | | | | Move some configurations in defconfig file - CONFIG_DM_SPI (removed by syncing defconfigs ) - CONFIG_CMD_SF - CONFIG_CMD_SPI - CONFIG_CMD_SF_TEST This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* configs: am335x_evm: Add CONFIG_BLKFaiz Abbas2019-03-223-3/+0
| | | | | | With DM_MMC and DM_USB enabled, enable CONFIG_BLK. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
* configs: dra7xx_evm: Remove ENV_IS_IN_FATFaiz Abbas2019-03-222-0/+2
| | | | | | | | | With U-boot supporting environment in multiple places, enable only ENV_IS_IN_EMMC Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BARChris Packham2019-03-191-0/+1
| | | | | | | | | This board uses Micron N25Q256A SPI flash. Enable SPI_FLASH_BAR to allow us to access the whole chip. Signed-off-by: Chris Packham <judge.packham@gmail.com> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000Chris Packham2019-03-191-0/+1
| | | | | | | | Set CONFIG_SYS_MALLOC_F_LEN to match the rest of the mvebu boards. The default of 0x400 is not enough when booting from SPI. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* configs/clearfog_gt_8k: add network interface supportBaruch Siach2019-03-191-1/+3
| | | | | | | | | | Enable the mvpp2 network driver for the Armada 8K SoC. Enable the Marvell PHY driver for the on-board 1512 PHY. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2019-03-141-0/+3
|\
| * ARM: Odroid XU3: Enable driver I2C support for OdroidXU3Anand Moon2019-03-121-0/+1
| | | | | | | | | | | | | | | | This commit enables support for I2C S3C424X0 driver. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: odroid-xu3: Display info late to have proper typeKrzysztof Kozlowski2019-03-111-0/+2
| | | | | | | | | | | | | | | | | | Printing the "Type" of board requires proper detection of revision which can happen only late because regulators are needed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | ARM: imx6q_logic: Enable MTD and NAND_MXS_DTAdam Ford2019-03-131-0/+3
| | | | | | | | | | | | | | | | This patch supports enabling MTD, and the corresponding CMD_MTD along with enabling the MXS NAND Controller with device tree support. Signed-off-by: Adam Ford <aford173@gmail.com>
* | configs: imx6qdl_icore_mmc: Enable watchdog and bootcounterShyam Saini2019-03-131-0/+7
| | | | | | | | | | | | Enable watchdog and bootcounter support on imx6qdl board Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
* | imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to KconfigFabio Estevam2019-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | Currently the command "saveenv" is not available. The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig, so fix the problem by moving it to the defconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | imx: ventana: hexdump invalid EEPROM dataTim Harvey2019-03-133-0/+3
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | ARM: liteboard: use random ethaddrMarcin Niestroj2019-03-131-0/+1
| | | | | | | | | | | | | | There is no ethaddr assigned to each board, so we need to use random value in order to use network. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* | ARM: liteboard: move towards driver model and device-tree bootMarcin Niestroj2019-03-131-1/+10
| | | | | | | | | | | | | | | | | | This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove USB code that is on longer executed after enabling CONFIG_DM_USB. Enable CONFIG_PINCTRL, so we can get rid of ethernet pin configuration. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* | pico-imx6ul: Convert to DM_PMICFabio Estevam2019-03-133-3/+21
| | | | | | | | | | | | | | | | | | | | | | Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is under an I2C bus, conver to DM_I2C as well. Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT to avoid build warnings. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
View Lorry Controller Status