summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* Convert CONFIG_SCSI to KconfigSimon Glass2017-07-1142-0/+42
| | | | | | | | This converts the following to Kconfig: CONFIG_SCSI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* ARM64: poplar: hi3798cv200: u-boot support for Poplar 96BoardsJorge Ramirez-Ortiz2017-07-101-0/+26
| | | | | | | | | | | | | | | | | | | | | | | This port adds support for: 1) Serial 2) eMMC 3) USB It has been tested with ARM TRUSTED FIRMWARE running u-boot as the BL33 executable [see board's README] eMMC has been tested for reading and booting the loader and linux kernels as well as saving the u-boot environment. USB has been tested with ASIX networking adapter and SanDisk 7.4GB drive. PSCI has been tested via the reset call (PSCI executes from DDR) The firwmare upgrade process has been tested via TFTP and USB FAT filesystem containing the fastboot.bin image in one of the partitions. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
* defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LISTCooper Jr., Franklin2017-07-101-1/+1
| | | | | | | | Include K2G ICE to OF_LIST so it can be used for runtime board detection. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* defconfig: keystone2: Enable U-boot runtime DTB detectionCooper Jr., Franklin2017-07-104-0/+12
| | | | | | | | Enable various config options to allow U-boot at runtime to select the proper dtb to use from the list of dtb's within the FIT image. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: Resync defconfigsTom Rini2017-07-1023-49/+34
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc, 8xx: Add support for MCR3000 board from CSSIChristophe Leroy2017-07-081-0/+88
| | | | | | | | | CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000 and CMPC885 which are respectively based on MPC866 and MPC885 processors. This patch adds support for the first board. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
* am335x: sl50: Enable CONFIG_AUTOBOOT_KEYEDEnric Balletbo i Serra2017-07-071-1/+4
| | | | | | | | On startup the SL50 board halt at U-Boot prompt. Use CONFIG_AUTOBOOT_KEYED to enable autoboot for this board and define the <SPACE> key to get the U-Boot prompt. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* avr32: Retire AVR32 for goodAndy Shevchenko2017-07-064-92/+0
| | | | | | | | | | | | | | AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* configs: Odroid C2: enable device tree overlaysxypron.glpk@gmx.de2017-07-061-0/+1
| | | | | | | | The Odroid C2 comes with several expansion options such as an RTC module. As these expansions are not considered in the Linux device tree they have to be enabled via device tree overlays. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* CHIP: add device tree overlay supportPeter Robinson2017-07-062-0/+4
| | | | | | | CHIP and CHIP Pro devices have options of DIP addon boards some of which need overlays from the beginning so it makes sense to enable device tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* 96boards: dragonboard/hikey: add device tree overlay supportPeter Robinson2017-07-062-0/+4
| | | | | | | | 96boards CE devices such as the DragonBoard and Hikey devices have numerous mezzanine options some of which need overlays from the beginning so it makes sense to enable device tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* am335x: beagle/evm: add device tree overlay supportPeter Robinson2017-07-066-0/+7
| | | | | | | | TI am33xx devices such as the BeagleBone devices have numerous cape options such as screens some of which need overlays from the beginning so it makes sense to enable evice tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* Raspberry Pi: add device tree overlay supportPeter Robinson2017-07-064-0/+8
| | | | | | | | Raspberry Pi has numerous HAT and other HW expansion options such as screens and cameras some of which need overlays from the beginning so it makes sense to enable evice tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* igep003x: Falcon modeLadislav Michl2017-07-061-0/+1
| | | | | | | Implement spl_start_uboot to let Falcon mode work. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Heiko Schocher <hs@denx.de>
* igep00x0: Enable UBI fastmapLadislav Michl2017-07-061-0/+1
| | | | | | | Fastmap significantly reduces flash scan time, enable it by default. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Heiko Schocher <hs@denx.de>
* powerpc: remove 4xx supportHeiko Schocher2017-07-0346-1328/+0
| | | | | | | | | There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge git://git.denx.de/u-boot-arcTom Rini2017-06-293-3/+43
|\
| * arc: Add support for HS Development Kit boardAlexey Brodkin2017-06-291-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARC HS Development Kit board is a new low-cost development platform sporting ARC HS38 in real silicon with nice set of features such as: * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz * 4Gb of DDR (we use only lowest 1Gb out of it now) * Lots of DesigWare peripherals * Different connectivity modules: - Synopsys HAPS HT3 - Arduino-compatible connector - MikroBUS This initial commit supports the following peripherals: * UART (DW 8250) * Ethernet (DW GMAC) * SD/MMC (DW Mobile Storage) * USB 1.1 & 2.0 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * axs10x: Get rid of both I2C and EEPROM who used to use I2CAlexey Brodkin2017-06-292-2/+0
| | | | | | | | | | | | | | | | | | With eb5ba3aefdf0 "i2c: Drop use of CONFIG_I2C_HARD" in place we cannot use I2C EEPROM any longer so we're dropping all references to both EEPROM and I2C which was only used for EEPROM. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org>
| * axs10x: Add support of Ext2/4 FSAlexey Brodkin2017-06-292-0/+6
| | | | | | | | | | | | Those could be easily used on USB flash drives or on SD/MMC cards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * axs101: Enable data cacheAlexey Brodkin2017-06-291-1/+0
| | | | | | | | | | | | | | There's no reason to keep data cache disabled in axs101 board any longer, enabling it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | ARM: at91: ma5d4: Enable random ethaddrMarek Vasut2017-06-291-0/+1
| | | | | | | | | | | | Use random ethaddr by default in case no ethaddr is set. Signed-off-by: Marek Vasut <marex@denx.de>
* | ARM: at91: ma5d4: Enable DFU and UMSMarek Vasut2017-06-291-0/+8
| | | | | | | | | | | | | | Enable DFU and USB mass storage support for the DENX MA5D4 SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
* | atmel, at91: fix taurus boardHeiko Schocher2017-06-291-0/+3
| | | | | | | | | | | | | | | | | | since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" taurus board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
* | atmel, at91: fix smartweb boardHeiko Schocher2017-06-291-0/+3
| | | | | | | | | | | | | | | | | | since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" smartweb board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
* | GE Bx50v3 boards: fix fdt file variablePeter Robinson2017-06-293-3/+3
| | | | | | | | | | | | | | | | | | | | | | The CONFIG_DEFAULT_FDT_FILE expects just the file not a full path as that might vary depending on the variant of Linux distro you might be using. Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* | ti816x: Enable ethernet supportTom Rini2017-06-281-0/+5
|/ | | | | | | | | | The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://www.denx.de/git/u-boot-imxTom Rini2017-06-2710-0/+97
|\ | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.h
| * mx6sabresd: Rename target to mx6sabresd_defconfigFabio Estevam2017-05-311-0/+0
| | | | | | | | | | | | | | | | As mx6sabresd only supports SPL target now, there is no need to keep the 'spl' in the name of the target, so simply rename it to mx6sabresd_defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * engicam: Move PHY configs to defconfigJagan Teki2017-05-318-0/+17
| | | | | | | | | | | | | | | | | | - CONFIG_PHYLIB - CONFIG_PHY_SMSC - CONFIG_PHY_MICREL - CONFIG_PHY_MICREL_KSZ9021 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * icorem6: Recover missing nand defconfigJagan Teki2017-05-311-0/+45
| | | | | | | | | | | | | | | | | | nand defconfig is accidentally removed from below commit, so recover the same. "icorem6: Make SPL to pick suitable fdt" (sha1: 15455a6b01d97d575afe2f494cfc9722424230c0) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * pico-imx7d: Add initial supportVanessa Maegima2017-05-311-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | Add the initial support for pico-imx7d board based on Wig Cheng's source code. Add support for eMMC, USB gadget, I2C, PMIC and Ethernet. For more information about this board, please visit: http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* | atmel, at91: fix corvus boardHeiko Schocher2017-06-231-0/+6
| | | | | | | | | | | | | | since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" corvus board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2017-06-216-2/+7
|\ \
| * | odroid: remove CONFIG_DM_I2C_COMPAT configJaehoon Chung2017-06-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove the CONFIG_DM_I2C_COMPAT config. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | configs: odroid-xu3: remove the CONFIG_I2C_COMPATJaehoon Chung2017-06-051-1/+1
| | | | | | | | | | | | | | | | | | | | | Remove the CONFIG_I2C_COMPAT, instead enable the CONFIG_SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | configs: enable the CONFIG_DM_MMC for exynos4 seriesJaehoon Chung2017-06-055-0/+5
| | | | | | | | | | | | | | | | | | | | | Enable the CONFIG_DM_MMC for exynos4 series. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblazeTom Rini2017-06-212-1/+55
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xilinx changes for v2017.07 ZynqMP: - config cleanup - SD LS mode support - psu_init* cleanup - unmap OCM - Support for SMC Zynq: - add ddrc to Kconfig - add topic-miamilite board support
| * | | arm: zynq: Add support for the topic-miamilite system-on-moduleMike Looijmans2017-06-201-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The topic-miamilite SoM contains a Zynq xc7z010 SoC, 1GB DDR3L RAM, 64MB dual-parallel QSPI NOR flash and clock sources. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfigMike Looijmans2017-06-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | ARM: rmobile: Add missing config bitsMarek Vasut2017-06-202-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit "fb82fe385173 configs: Resync defconfigs" resynced all config files. This exposed two latent issues with the Gen3 boards in that we had not been setting CONFIG_DEFAULT_FDT_FILE correctly and had not been setting CONFIG_CMD_MMC. Fix both of these. Fixes: fb82fe385173 ("configs: Resync defconfigs") Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | configs: Resync defconfigsTom Rini2017-06-19261-734/+472
| | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-06-195-0/+90
|\ \ \ \ | |/ / / |/| | |
| * | | sun50i: h5: Add initial NanoPi NEO2 supportJagan Teki2017-06-141-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NanoPi NEO2 is designed and developed by FriendlyElec using the Allwinner 64-bit H5 SOC. NanoPi Neo2 key features - Allwinner H5, Quad-core 64-bit Cortex-A53 - 512MB DDR3 RAM - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC MicroUSB power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | sun50i: a64: Add initial Orangepi Win/WinPlus supportJagan Teki2017-06-141-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | sun50i: h5: Add initial Orangepi Zero Plus 2 supportJagan Teki2017-06-141-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Orangepi Zero Plus 2 is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Zero Plus 2 has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG+power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | sunxi: add a defconfig for SoPine w/ official baseboardIcenowy Zheng2017-06-081-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SoPine is a SoM by Pine64, with an Allwinner A64 SoC, a LPDDR3 DRAM chip, an AXP803 PMIC, a SPI NOR Flash and a MicroSD slot. The card detect pin of the MicroSD slot is broken, however, it doesn't matter as the design of SoPine didn't allow hot-swapping the MicroSD card (The MicroSD slot is at the back of the SoM, and when the SoM is installed on the baseboard, it's nearly impossible to remove the MicroSD). The official baseboard of it is a board with nearly the same connectors with the original Pine64+, with the MicroUSB power jack replaced, and at the position of MicroSD slot a eMMC module slot is added. Add support for SoPine with the official baseboard by adding its defconfig file. It still uses the device tree of Pine64, however, it will change after a proper device tree of SoPine with baseboard is accepted by Linux mainline. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> [Update board/sunxi/MAINTAINERS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | sun8i: h3: Add initial NanoPi M1 Plus supportJagan Teki2017-06-081-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NanoPi M1 Plus is designed and developed by FriendlyElec for professionals, enterprise users, makers and hobbyists using the Allwinner H3 SOC. NanoPi M1 Plus key features - Allwinner H3, Quad-core Cortex-A7@1.2GHz - 1GB DDR3 RAM - 8GB eMMC - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
* | | | powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher2017-06-1644-1053/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | defconfig: arm335x_evm_usbspl: Update MUSB EthernetMichael Welling2017-06-161-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds CONFIG_SPL_USB_GADGET_SUPPORT and CONFIG_SPL_USBETH_SUPPORT. Removes CONFIG_SPL_NAND_SUPPORT, CONFIG_SPL_MTD_SUPPORT, and CONFIG_SPL_YMODEM_SUPPORT to free up space to fit in RAM. Signed-off-by: Michael Welling <mwelling@ieee.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
View Lorry Controller Status