summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* armv8: ls2080a: Drop macro CONFIG_LS2080AYork Sun2017-04-179-9/+5
| | | | | | Use CONFIG_ARCH_LS2080A instead. Signed-off-by: York Sun <york.sun@nxp.com>
* arm: ls1046ardb: Add SD secure boot targetRuchika Gupta2017-04-171-0/+45
| | | | | | | | | | | | | | | | | | | | - Add SD secure boot target for ls1046ardb. - Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. - CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM (128K) where 32K are reserved for use by boot ROM and 6K for the header. - Reduce the size of CAAM driver for SPL Blobification functions and descriptors, that are not required at the time of SPL are disabled. Further error code conversion to strings is disabled for SPL build. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm: ls1043ardb: Add NAND secure boot targetRuchika Gupta2017-04-171-0/+57
| | | | | | | | | | | | | | | | | Add NAND secure boot target for ls1043ardb. - Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. - MACRO for CONFIG_BOOTSCRIPT_COPY_RAM is enabled to copy Bootscript from NAND to DDR. Offsets for Bootscript on NAND and DDR have been also defined. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm: ls1043ardb: Add SD secure boot targetRuchika Gupta2017-04-171-0/+57
| | | | | | | | | | | | | | | | | | | | - Add SD secure boot target for ls1043ardb. - Implement FSL_LSCH2 specific spl_board_init() to setup CAAM stream ID and corresponding stream ID in SMMU. - Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. - CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM (128K) where 32K are reserved for use by boot ROM and 6K for secure boto header. - Error messages during SPL boot are limited to error code numbers instead of strings to reduce the size of SPL image. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: LS1012ARDB: Add QSPI Secure Boot targetVinitha Pillai-B572232017-04-171-0/+48
| | | | | | | | | Add QSPI Secure Boot target to enable chain of trust Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: LS1046ARDB: Add QSPI Secure Boot targetVinitha Pillai-B572232017-04-171-0/+37
| | | | | | | | Add QSPI Secure Boot target. Also enable sec init. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: LS1046AQDS: Add NOR Secure Boot TargetSumit Garg2017-04-171-0/+39
| | | | | | | | Add NOR secure boot target. Also enable sec init. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: LS1043ARDB: Enable PPA in Secure boot defconfigVinitha Pillai-B572232017-04-171-0/+1
| | | | | | | | | Enable PPA in secure boot by defining FSL_LS_PPA macro in its defconfig file. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls1043ardb: SPL size reductionSumit Garg2017-04-171-1/+0
| | | | | | | | | | | | | | | | | | | | | Using changes in this patch we were able to reduce approx 10k size of u-boot-spl.bin image. Following is breif description of changes to reduce SPL size: 1. Changes in board/freescale/ls1043ardb/Makefile to remove compilation of eth.c and cpld.c in case of SPL build. 2. Changes in board/freescale/ls1043ardb/ls1043ardb.c to keep only ddr_init and board_early_init_f funcations in case of SPL build. 3. Changes in ls1043a_common.h & ls1043ardb.h to remove driver specific macros due to which static data was being compiled in case of SPL build. 4. Disable MMC driver from bieng compiled in case of SPL NAND build and NAND driver from bieng compiled in case of SPL MMC build. 5. Remove I2C driver support from SPL in case of LS1043ARDB. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2017-04-1417-0/+20
|\
| * board: toradex: colibri_vf: Add DCU support for Colibri VybridStefan Agner2017-04-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | The Vybrid SoC family has the same display controller unit (DCU) like the LS1021A SoC. This patch adds platform data, pinmux defines and clock control to enable the driver for Toradex Colibri Vybrid module. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * Convert CONFIG_FSL_DCU_FB to KconfigSanchayan Maity2017-04-1416-0/+16
| | | | | | | | | | | | | | | | | | Rename CONFIG_FSL_DCU_FB to CONFIG_VIDEO_FSL_DCU_FB and convert it to Kconfig. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2017-04-148-1/+14
|\ \
| * | arm: socfpga: sr1500 use environment in common headerDalon Westergreen2017-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the sr1500 header and instead uses the common environment provided in socfpga_common.h which now uses distro boot. This board has no upstream devicetree in the kernel source, so set to socfpga_cyclone5_sr1500.dtb. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v2: - Remove unneeded CONFIG_BOOTFILE - set devicetree name to match socfpga_{fpga model}_{board model}.dts pattern
| * | arm: socfpga: Socrates use environment in common headerDalon Westergreen2017-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the socrates headers and instead uses the common environment provided in socfpga_common.h which now uses distro boot. Change default devicetree name to match devicetree name in upstream kernel source. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v2: - Remove unneeded CONFIG_BOOTFILE
| * | arm: socfpga: SoCKit use environment in common headerDalon Westergreen2017-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the SoCKit headers and instead uses the common environment provided in socfpga_common.h which now uses distro boot. Change default devicetree name to match devicetree name in upstream kernel source. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v2: - Remove unneeded CONFIG_BOOTFILE
| * | arm: socfpga: DE1 use environment in common headerDalon Westergreen2017-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the de1 headers and instead uses the common environment provided in socfpga_common.h which now uses distro boot. This board does not have a devicetree in the upstream kernel source so set devicetree to socfpga_cyclone5_de1_soc.dtb. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in V2: - Remove unneeded CONFIG_BOOTFILE - set devicetree name to match socfpga_{fpga model}_{board model}.dts pattern
| * | arm: socfpga: C5 SoCDK use environment in common headerDalon Westergreen2017-04-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the C5 SoCDK headers and instead uses the common environment provided in socfpga_common.h which now uses distro boot. In addition to the above, add support to boot from the custom a2 type partition. Change default devicetree name to match devicetree name in upstream kernel source. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v2: - Remove unneeded CONFIG_BOOTFILE
| * | arm: socfpga: A5 SoCDK use environment in common headerDalon Westergreen2017-04-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the A5 socdk headers and instead uses the common environment provided in socfpga_common.h which now uses distro boot. Add support to boot from the custom a2 type partition. Change default devicetree name to match devicetree name in upstream kernel source. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v3: - Fix small typo in defconfig, missing "C" Changes in v2: - Remove unneeded CONFIG_BOOTFILE - Fix dtb name a5config test Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
| * | arm: socfpga: DE0 use environment in common headerDalon Westergreen2017-04-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the default environment from the de0 headers and instead uses the common environment provided in socfpga_common.h which now uses distro boot. In addition to the above, add support to boot from the custom a2 type partition Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> -- Changes in v2: - Remove unneeded CONFIG_BOOTFILE
| * | ARM: socfpga: Rename MCVEVKMarek Vasut2017-04-141-1/+1
| |/ | | | | | | | | | | The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2017-04-141-1/+4
|\ \
| * | odroid-c2: enable new Meson GX MMC driver in board defconfigHeiner Kallweit2017-04-141-1/+4
| |/ | | | | | | | | | | Enable new Meson GX MMC driver in Odroid C2 defconfig. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
* | Merge git://git.denx.de/u-boot-dmTom Rini2017-04-137-6/+218
|\ \ | | | | | | | | | | | | Here with some DM changes as well as the long-standing AT91 DM/DT conversion patches which I have picked up via dm.
| * | board: sama5d4ek: enable early debug UARTWenyou Yang2017-04-133-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Enable the early debug UART to debug problems when an ICE or other debug mechanism is not available. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | board: sama5d4ek: update to support DM/DTWenyou Yang2017-04-133-3/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model, so do SPL. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | board: sama5d4_xplained: enable early debug UARTWenyou Yang2017-04-133-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Enable the early debug UART to debug problems when an ICE or other debug mechanism is not available. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | board: sama5d4_xplained: update to support DM/DTWenyou Yang2017-04-133-3/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model, so do SPL. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | serial: ns16550: Link in the DM driver when when using platdataAlexandru Gagniuc2017-04-131-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | Do not condition the compilation of the U_BOOT_DRIVER by !OF_PLATDATA. This is inconsistent with the majority of other drivers. This also blocks OF_PLATDATA boards with an 16550-compatible serial from using serial in SPL. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Simon Glass <sjg@chromium.org> Added tweak for rock to avoid a TPL build failure: Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-04-1313-10/+142
|\ \ | |/ |/| | | | | | | Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOMAdam Ford2017-04-121-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | Logic PD has an i.MX6Q system on module (SOM) with a development kit. The SOM has a built-in microSD socket, DDR and NAND flash. The development kit has an SMSC Ethernet PHY, serial debug port and a variety of peripherals. This have been verified to boot the i.MX6Q version over either SD on the development kit or NAND built into the SOM. Items in the dtsi file are specific to the SOM itself. Items in the dts file are in the baseboard. Future versions of the SOM will come out supporting the same basebord and potentially future base boards will come out supporting the same SOM. Signed-off-by: Adam Ford <aford173@gmail.com>
| * ARM: mx5: Rename M53EVKMarek Vasut2017-04-051-1/+1
| | | | | | | | | | | | The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
| * configs: imx6: Select missing BOARD_LATE_INITJagan Teki2017-03-265-5/+0
| | | | | | | | | | | | | | | | | | | | Select missing BOARD_LATE_INIT from configs/ to respective targets on arch area for Engicam imx6 boards. Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx: ventana: add GW5904 supportTim Harvey2017-03-203-0/+70
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: mx6slevk: enable more DM driversPeng Fan2017-03-203-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. So needs to enable them together. DM FEC and SPI are not enabled, but they use gpio in board code. So use gpio_request first to request the gpio, because DM_GPIO is enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6slevk: introduce device tree supportPeng Fan2017-03-202-2/+4
| | | | | | | | | | | | | | | | Introduce device tree support. dts from kernel commit c4f3f22edd Merge tag 'linux-kselftest-4.11-rc1' Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6slevk: use SPI_BOOTPeng Fan2017-03-201-1/+2
| | | | | | | | | | | | | | Use SPI_BOOT instead of SYS_BOOT_SPINOR. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | defconfigs: am57xx_hs_evm: Move OPTEE load address to avoid overlapsAndrew F. Davis2017-04-091-1/+1
| | | | | | | | | | | | | | Move the OPTEE load address to 0xbdb00000 in order to avoid overlap with the memory regions used in radio and RVC usecases. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: dra7xx_hs_evm: Move OPTEE load address to avoid overlapsMisael Lopez Cruz2017-04-091-1/+1
| | | | | | | | | | | | | | | | Move the OPTEE load address to 0xbdb00000 in order to avoid overlap with the memory regions used in radio and RVC usecases. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: am43xx_hs_evm: Add USB Host boot mode supportAndrew F. Davis2017-04-081-0/+1
| | | | | | | | | | | | | | | | | | Enable SPL_USB_HOST_SUPPORT in the default defconfig to allow booting from USB peripherals. Unlike the non-HS boards, we already load SPL to a 0x4030_0000+ address, so no other changes are needed. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: am43xx_hs_evm: Add USB client boot mode supportAndrew F. Davis2017-04-081-0/+3
| | | | | | | | | | | | | | Enable CONFIG_SPL_USBETH_SUPPORT in the default defconfig to allow booting as a USB RNDIS peripheral. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: am43xx_hs_evm: Add Net boot mode supportAndrew F. Davis2017-04-081-1/+3
| | | | | | | | | | | | | | Enable Eth/Net boot support in the default defconfig to allow network booting. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis2017-04-081-0/+1
| | | | | | | | | | | | | | Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis2017-04-081-0/+7
| | | | | | | | | | | | | | Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: am43xx_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis2017-04-081-1/+3
| | | | | | | | | | | | | | Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis2017-04-081-0/+6
| | | | | | | | | | | | | | | | Sync new additions to non-HS defconfig with HS defconfig. Also add SPL NAND support, this was disabled before due to size constraints, enable this now at the expense of the less used GPT partition support. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfigAndrew F. Davis2017-04-081-0/+55
| | | | | | | | | | | | | | TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfig: k2hk_hs_evm: Add k2hk_hs_evm_defconfigAndrew F. Davis2017-04-081-0/+51
| | | | | | | | | | | | | | TI K2HK secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | defconfig: k2e_hs_evm: Add k2e_hs_evm_defconfigVitaly Andrianov2017-04-081-0/+51
| | | | | | | | | | | | | | | | | | | | TI K2E secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Kconfig: Adds SYS_TEXT_BASE config option for Keystone2Madan Srinivas2017-04-084-0/+4
| | | | | | | | | | | | | | | | | | | | | | This patch makes SYS_TEXT_BASE a config option for Keystone2 so that it can be used to load u-boot at different addresses on secure and non-secure Keystone2 devices. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
View Lorry Controller Status