summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2019-05-074-119/+53
|\ | | | | | | | | - RZ/A1 addition. - Old board removal.
| * ARM: dts: renesas: Add RZ/A1 GR-Peach boardChris Brandt2019-05-071-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: sh7785lcr: Remove the boardMarek Vasut2019-05-072-79/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
| * sh: ecovec: Remove the boardMarek Vasut2019-05-071-40/+0
| | | | | | | | | | | | | | | | | | | | | | Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2019-05-071-0/+1
|\ \ | |/ |/| | | | | - Assorted stratix10 fixes. - DDR driver DM migration.
| * arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan2019-05-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
* | ARM: da850evm: Enable da850-ohci USB host controllerAdam Ford2019-05-051-0/+5
| | | | | | | | | | | | | | | | The DA850 EVM has one USB 1.1 OHCI Host controller. With the host controller now support DM_USB, this patch enables the respective functions for the da850evm. Signed-off-by: Adam Ford <aford173@gmail.com>
* | configs: am335x_evm: enable SPL_FIT_IMAGE_TINYJean-Jacques Hiblot2019-05-051-0/+1
|/ | | | | | | | The size of the SPL for the am335x_evm is constrained. There is no need to have advanced SPL FIT features, so keep the SPL FIT support tiny. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mipsTom Rini2019-05-045-5/+9
|\ | | | | | | | | | | - mscc: small fixes, enhance network support for Serval, Luton and Ocelot - mt7620: rename arch to more generic name mtmips - mips: pass initrd addresses via DT as physical addresses
| * mips: rename mach-mt7620 to mach-mtmipsWeijie Gao2019-05-034-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
| * configs: mscc_serval: Add network supportHoratiu Vultur2019-05-031-1/+5
| | | | | | | | | | | | Update default config to use network driver for Serval SoCs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
* | Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigAlex Kiernan2019-05-0469-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
* | Merge git://git.denx.de/u-boot-marvellTom Rini2019-05-031-2/+17
|\ \ | | | | | | | | | | | | - Fix in kwbimage (return code checking) (Young Xiao) - Misc updates to Turris Omnia (Marek)
| * | arm: mvebu: turris_omnia: enable defconfig options needed by vendorMarek Behún2019-05-031-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This options will be enabled by default by CZ.NIC shipped U-Boot. Enable them in defconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | arm: mvebu: turris_omnia: add GPIO support to defconfigMarek Behún2019-05-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the gpio command and driver for the I2C connected pca9538 controller, to be able to determine if SFP module is present in the Turris Omnia router. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | arm: mvebu: turris_omnia: move ATSHA204A from defconfig to KconfigMarek Behún2019-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This driver is required for Turris Omnia to read ethernet addresses. Move the dependency from turris_omnia_defconfig to Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | arm: mvebu: turris_omnia: use AHCI and SATA driver modelMarek Behún2019-05-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable AHCI, SCSI and SATA for compliance with the driver model migration. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | arm: mvebu: turris_omnia: add XHCI to defconfigMarek Behún2019-05-031-0/+2
| |/ | | | | | | | | | | | | | | | | Add XHCI_HOST and XHCI_MVEBU to defconfig, so that user's can by default boot from USB on Turris Omnia. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch '2019-05-03-master-imports'Tom Rini2019-05-033-14/+67
|\ \ | | | | | | | | | | | | | | | - Various btrfs fixes - Various TI platform fixes - Other fixes (cross build, taurus update, Kconfig help text)
| * | ti: Add am335x-pocketbeagle to am335x_evm_defconfig.Vagrant Cascadian2019-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | Add am335x-pocketbeagle to CONFIG_OF_LIST in am335x_evm_defconfig. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | at91: cleanup taurus portHeiko Schocher2019-05-032-13/+66
| |/ | | | | | | | | | | | | | | | | - at91sam9g20-taurus.dts: use labels - cleanup taurus port to compile clean with current mainline again. SPL has no serial output anymore, so it fits into SRAM. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchipTom Rini2019-05-013-1/+81
|\ \ | |/ |/| | | | | | | | | | | | | | | Improvements and new features: - improved SPI driver for better read throughput - refactors initialisation of debug UART init - restructures header file paths - adds pinctrl improvements Adds Kever as a co-custodian.
| * rockchip: rk3036: add board_debug_uart_init()Kever Yang2019-05-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use board_debug_uart_init() for UART iomux init instead of do it in board_init_f, and move the function to soc file so that we can find all the soc/board setting in soc file and use a common board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Fixed whitespace error:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * rockchip; kylin-rk3036: enabl DEBUG UARTKever Yang2019-05-011-0/+5
| | | | | | | | | | | | | | Enable debug uart for kylin board in defconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * rockchip: rk3399: Add Orangepi RK3399 supportJagan Teki2019-05-011-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Orangepi RK3399 board. Specification - Rockchip RK3399 - 2GB/4GB DDR3 - 16GB eMMC - SD card slot - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - Mini PCIe - Sensors, Keys etc - DC12V-2A and DC5V-2A Commit details about Linux DTS sync: "arm64: dts: rockchip: Add support for the Orange Pi RK3399" (sha1: d3e71487a790979057c0fdbf32f85033639c16e6) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * rockchip: rk3399-puma: support Gigadevice SPI-NOR flashPhilipp Tomsich2019-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | Over the last quarter, a part of our production has used NOR flash from Gigadevice in addition to the Winbond parts that we typically source. This requires the SPI_FLASH_GIGADEVICE config to be set. Enable SPI_FLASH_GIGADEVICE in the board's default defconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Klaus Goger <klaus.goger@theobroma-systems.com>
* | Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini2019-05-0121-14/+185
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
| * colibri_imx6: use UUID for rootfsIgor Opaniuk2019-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | 1. Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs partition. This fixes the issue, when MMC controllers are probed in a different order in U-boot and Linux kernel. 2. Fix legacy USB command (both sdboot and usbboot can be used now). Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * warp7: Switch to DM USBPierre-Jean Texier2019-04-252-0/+2
| | | | | | | | | | | | | | | | This commit switches to DM USB for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
| * warp7: Switch to DM SerialPierre-Jean Texier2019-04-252-0/+4
| | | | | | | | | | | | | | | | This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
| * imx: Add variscite DART-6UL Evaluation KitParthiban Nallathambi2019-04-251-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port for the DART-6UL Evaluation Kit SBC. Based on the variscite DART-6UL iMX6ULL SoM. CPU: Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 43C Reset cause: POR Model: Variscite DART-6UL Evaluation Kit Board: Variscite DART-6UL Evaluation Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial@02020000 Out: serial@02020000 Err: serial@02020000 Net: FEC0 Working: - Eth0 - i2c - MMC/SD - eMMC - USB host - UART 1 Note: LCDIF porting needs DM_VIDEO https://lists.denx.de/pipermail/u-boot/2019-April/365506.html Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
| * pico-imx7d: Convert DM MMCJoris Offouga2019-04-253-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enable convert DM MMC for imx7d-pico board and variant. Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing pico-pi bootscripts and environment variables that rely on mmc 0. Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will work unmodified. When converting to DM_MMC it is necessary that SPL initializes eMMC by itself, so move the original eMMC initialization from U-Boot proper to SPL. Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7Joris Offouga2019-04-253-0/+9
| | | | | | | | | | | | | | | | | | This patch is necessary for convert this board to dm driver model DM GPIO requires gpio_request() to be called explicitly before doing any gpio operation Signed-off-by: Joris Offouga <offougajoris@gmail.com>
| * pico-imx7d: defconfig: Add DT file hooksJoris Offouga2019-04-253-3/+6
| | | | | | | | | | | | This patch adds DT file hooks for Pico i.MX7D SOM and variant boards Signed-off-by: Joris Offouga <offougajoris@gmail.com>
| * colibri-imx6ull: migrate fec to using driver modelMarcel Ziswiler2019-04-251-2/+1
| | | | | | | | | | | | | | | | Migrate Ethernet FEC to using driver model. Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * colibri-imx6ull: migrate usb to using driver modelMarcel Ziswiler2019-04-251-0/+1
| | | | | | | | | | | | | | | | | | Migrate USB to using driver model. Add USBH_PEN GPIO regulator. While at it also add alias e.g. as required for UMS. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * colibri-imx6ull: migrate mmc to using driver modelMarcel Ziswiler2019-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | Migrate MMC to using driver model. Migrate USDHC to using pinctrl. While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * colibri-imx6ull: migrate pinctrl and regulators to dtb/dmMarcel Ziswiler2019-04-251-1/+4
| | | | | | | | | | | | | | | | | | | | | | Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * colibri-imx6ull: configuration clean-upMarcel Ziswiler2019-04-251-5/+3
| | | | | | | | | | | | | | | | | | | | Drop disabling SPL_SYS_THUMB_BUILD as we anyway do not use SPL. Enbale CRC32 verify, USB SDP and EFI loader support. Drop CMD_GPT and disabling RANDOM_UUID. Do savedefconfig which drops USB_FUNCTION_SDP. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * imx: support i.MX8QM MEK boardPeng Fan2019-04-251-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8QM MEK board support. Included a basic dts, enabled SPL FIT Boot log as below: U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) Normal Boot Trying to boot from MMC2_2 U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) CPU: NXP i.MX8QM RevB A53 at 142933 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK Build: SCFW 9330215b Boot: SD1 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Error: ethernet@5b040000 address not set. eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * Convert CONFIG_USB_EHCI_MX5 to KconfigLukasz Majewski2019-04-256-0/+6
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boardsLukasz Majewski2019-04-251-0/+1
| | | | | | | | | | | | This commit enables the DM_USB on HSC|DDC i.MX53 based boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * ARM: defconfig: Move CONFIG_FSL_ESDHC to KconfigLukasz Majewski2019-04-251-0/+1
| | | | | | | | | | | | | | The CONFIG_FSL_ESDHC is now enabled and defined in Kconfig, not in include/configs/kp_imx53.h Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * imx8qxp: mek: enable dm-spl for pmPeng Fan2019-04-251-1/+1
| | | | | | | | | | | | | | | | | | with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * ARM: omap3_logic: Enable UUIDAdam Ford2019-04-254-0/+4
| | | | | | | | | | | | | | Instead of hardcoding the mmcroot to /dev/mmcblkX, use the UUID method. Signed-off-by: Adam Ford <aford173@gmail.com>
| * ARM: imx6q_logic: Allow storing environment in FAT on eMMCAdam Ford2019-04-251-1/+3
| | | | | | | | | | | | | | | | | | Some variations of the imx6q_logic board have eMMC instead of NAND. Rather than creating a separate defconfig, this patch adds the ability to read/write to eMMC (mmc 0:1) when NAND doesn't exist. Signed-off-by: Adam Ford <aford173@gmail.com>
| * imx8: mek: move HUSH_PARSER to defconfigPeng Fan2019-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move HUSH_PARSER to defconfig, otherwise meet " => run netboot Booting from net ... Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Unknown command '0x80280000' - try 'help' Unknown command 'if' - try 'help' Unknown command 'then' - try 'help' Unknown command 'then' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' Unknown command 'else' - try 'help' Unknown command 'fi' - try 'help' " Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx8qxp: mek: Enable CMD_FUSEPeng Fan2019-04-251-0/+1
| | | | | | | | | | | | Enable CMD_FUSE for i.MX8QXP MEK Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt2019-04-29525-0/+525
| | | | | | | | | | | | | | | | | | Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Resync with savedefconfigTom Rini2019-04-29774-912/+856
| | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
View Lorry Controller Status