summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* configs: Resync with savedefconfigWIP/07Nov2019Tom Rini2019-11-07413-849/+57
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* mpc85xx, socrates: add DM PCI supportHeiko Schocher2019-11-061-0/+7
| | | | | | | | add DM PCI support on the socrates board. use PCIE_FSL now. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc85xx, socrates: enable DM serialHeiko Schocher2019-11-061-0/+3
| | | | | | | switch to DM_SERIAL support. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc85xx, socrates: enable DM I2CHeiko Schocher2019-11-061-1/+3
| | | | | | | enable DM I2C support for the socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc85xx, socrates: disable VIDEOHeiko Schocher2019-11-061-3/+0
| | | | | | | disable video, as not really needed longer. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc85xx, socrates: get rid of DM_USB warningHeiko Schocher2019-11-061-1/+2
| | | | | | | add some defines and get rid of USB warning. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mpc85xx, socrates: add DM supportHeiko Schocher2019-11-061-1/+5
| | | | | | | enable CONFIG_DM for the socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* mx6: tbs2910: Minimise libfdt code sizeSimon Glass2019-11-041-0/+1
| | | | | | | | This board appears to be very near its size limit and cannot accept the new checking code in libfdt. Disable this code so this the board can continue to build. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge tag 'u-boot-imx-20191104' of ↵WIP/04Nov2019Tom Rini2019-11-0410-9/+258
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
| * tbs2910: Disable Plan9/RTEMS bootm supportTom Rini2019-11-031-0/+2
| | | | | | | | | | | | | | | | | | | | We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: support i.MX8QM ROM 7720 a1 boardOliver Graute2019-11-031-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * board/BuR/brppt2: initial commitHannes Schmelzer2019-11-031-0/+93
| | | | | | | | | | | | | | This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
| * imx8mm: evk: enable bd71837 pmicPeng Fan2019-11-031-1/+4
| | | | | | | | | | | | | | Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for DRAM and linux suspend voltage requirement. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * opos6uldev: migrate to DM_VIDEOSébastien Szymanski2019-11-031-1/+2
| | | | | | | | | | | | | | | | Migrate to DM_VIDEO, update the device tree and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
| * imx6ul: opos6ul: migrate to DM_ETHSébastien Szymanski2019-11-031-0/+2
| | | | | | | | | | | | | | Migrate to DM_ETH and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
| * imx: update i.MX8MQ device treesPatrick Wildt2019-11-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
| * mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPLLukasz Majewski2019-11-031-0/+3
| | | | | | | | | | | | After this change the SPL size has been reduced from 38K to 34K. Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTBLukasz Majewski2019-11-032-2/+12
| | | | | | | | | | | | | | This commit enabled support for fitImage on mccmon6 when we switch to DT/DTS (including falcon mode). Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot properLukasz Majewski2019-11-032-4/+54
| | | | | | | | | | | | | | | | | | | | This commit converts mccmon6's u-boot proper (in a single commit to avoid build breaks) to use solely DM/DTS. The DTS description of the mccmon6 has been ported from Linux kernel (v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be) Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 boardLukasz Majewski2019-11-031-0/+2
| | | | | | | | | | | | | | The TPC70 is equipped with DS1307 RTC device. Add code to enable support for it. Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * ARM: imx6: DHCOM i.MX6 PDK: defconfig: Enable MMC support of SPLClaudius Heine2019-11-031-0/+1
| | | | | | | | Signed-off-by: Claudius Heine <ch@denx.de>
| * imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5Lukasz Majewski2019-11-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | After the following commit: commit 772b55723bcb ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode") it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows using MMC device as boot device regardless of the device used by Boot ROM (FBL) as the first boot medium. Display5 board needs this flag set to allow falcon boot from eMMC device. Signed-off-by: Lukasz Majewski <lukma@denx.de>
* | tbs2910: Disable Plan9/RTEMS bootm supportTom Rini2019-11-031-0/+2
| | | | | | | | | | | | | | | | | | | | We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARC: [plat-axs101]: migrate to DM_MMCEugeniy Paltsev2019-11-011-0/+2
| | | | | | | | | | Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | arc: emsdp/iotdk: Switch to DM_MMCAlexey Brodkin2019-11-012-0/+4
| | | | | | | | | | | | | | Somehow EMSDP & IoT DK boards were skipped on ARC boads conversion to DM MMC. So doing it now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | arc: emsdp: Increase max FAT cluster sizeAlexey Brodkin2019-11-011-1/+1
|/ | | | | | | | | Some especially large SD-cards come from stock formatted with larger FAT cluster size so to accommodate those we just increase what we expect to have here in U-Boot given we have a plenty of space on EM SDP (16 MiB). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini2019-10-3018-0/+34
|\ | | | | | | | | | | | | | | - H6 dts(i) sync (Clément) - H6 PIO (Icenowy) - Fix pll1 clock calculation (Stefan) - H6 dram, half DQ (Jernej) - A64 OLinuXino eMMC (Sunil)
| * arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)Sunil Mohan Adapa2019-10-251-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4. commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)") This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree and a64-olinuxino_defconfig. Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> [jagan: updated linux-next commit details] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
| * mtd: spi: Clean up usage of CONFIG_SPI_FLASH_MTDFrieder Schrempf2019-10-2515-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in SPL. They often rely on hacks in the board header files to include this option conditionally. To be able to fix this, we previously introduced a separate option SPL_SPI_FLASH_MTD. Therefore we can now adjust the Makefile and change the code in sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD). We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the header files to the according defconfigs. The affected boards are socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6 and da850evm. We do this all in one patch to guarantee bisectibility. This change was tested with buildman to make sure it does not introduce any regressions by comparing the resulting binary sizes. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
| * stm32mp1: configs: Add CONFIG_SPL_SPI_FLASH_MTDFrieder Schrempf2019-10-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | As SPI_FLASH_MTD is used in SPL and U-Boot proper, we enable both, now that a separate option for SPL was introduced. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> [jagan: drop unrelated change] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
| * configs: sopine-baseboard: Enable SPI-FLASHJagan Teki2019-10-251-0/+1
| | | | | | | | | | | | | | SoPine has winbond SPI-FLASH, so enable the same in defconfig and add aliases for spi0 in -u-boot.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mipsWIP/25Oct2019Tom Rini2019-10-255-28/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | - bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs - bmips: various small fixes - mtmips: add new drivers for clock, reset-controller and pinctrl - mtmips: add support for high speed UART - mtmips: update/enhance drivers for SPI and ethernet - mtmips: add support for MMC
| * | configs: mtmips: remove configs which are selected in Kconfig or uselessWeijie Gao2019-10-254-28/+0
| | | | | | | | | | | | | | | | | | | | | Some configs are selected in Kconfig and is no longer needed in the defconfig files. Some configs (power domain, ram) are never used. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
| * | bmips: enable vr-3032u nand supportÁlvaro Fernández Rojas2019-10-251-0/+5
| |/ | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* | Merge branch '2019-10-24-ti-imports'Tom Rini2019-10-252-2/+14
|\ \ | | | | | | | | | | | | - Enable DFU on dra7xx boards - Further Keystone 3 platform improvements
| * | configs: dra7xx_evm: Increase the size of SPL_MULTI_DTB_FITFaiz Abbas2019-10-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Expand SPL_MULTI_DTB_FIT to accommodate usb peripheral nodes being added to support SPL_DFU bootmode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
| * | configs: dra7xx_evm: Add Kconfigs for SPL_DFU bootmodeFaiz Abbas2019-10-252-0/+12
| |/ | | | | | | | | | | | | Enable configs for supporting SPL_DFU bootmode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2019-10-2520-14/+8
|\ \ | | | | | | | | | | | | - DWC3 improvements - i.MX7 EHCI bugfix
| * | configs: sei610: khadas-vim3 : disable Gadget support for the DWC3Jean-Jacques Hiblot2019-10-242-0/+2
| | | | | | | | | | | | | | | | | | | | | Those platform use the DWC2 controller for the gadget support and the DWC3 for host-only operations. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
| * | configs: k2g_evm_defconfig: disable XHCI_DWC3 and enable KEYSTONE_USB_PHYJean-Jacques Hiblot2019-10-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | KEYSTONE_USB_PHY is now required for proper USB operations. XHCI_DWC3 can be disabled as the xhci-dwc3 is not used anymore USB_DWC3_GADGET can also be removed, it is now selected automatically. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
| * | usb: dwc3: Kconfig: get rid of obsolete mode selectionJean-Jacques Hiblot2019-10-245-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
| * | usb: host: remove the xhci-zynqmp driverJean-Jacques Hiblot2019-10-2412-12/+0
| | | | | | | | | | | | | | | | | | This driver is not used anymore. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* | | Merge tag 'u-boot-atmel-2020.01-b' of ↵Tom Rini2019-10-253-0/+21
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features and fixes for 2020.01 cycle This feature set includes Eugen's work on a new tiny flexcom driver and eeprom mac retrieval for the sam9x60-ek board.
| * | | configs: sam9x60ek: enable microchip_flexcom, i2c and eepromEugen Hristev2019-10-243-0/+21
| |/ / | | | | | | | | | | | | | | | | | | enable driver model for i2c, eeprom for mac retrieval from eeprom i2c memory, and microchip_flexcom driver. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* | | Merge tag 'xilinx-for-v2020.01-part2' of ↵Tom Rini2019-10-2545-9/+572
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 part 2 common: - Fix manual relocation for repeatable commands arm: - Also clean up generated dtbos microblaze: - Add support for Manual relocation in crypto framework - Tune and align architecture bootm support zynq: - DT sync ups - Some defconfig updates - Remove empty board_early_init_f() zynqmp: - Clean firmware handing via drivers/firmware/ - DT/defconfig name alignments - DT cleanups with using firmware based clock driver - Some defconfig updates - Add IIO ina226 DT description - Tune zynqmp_psu_init_minimalize.sh script - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216 versal: - Clean firmware handing via drivers/firmware/ - Add gpio support - Enable DT overlay/USB/CLK/FPGA - DT updates - Tune mini configuration spi: - gqspi - Remove unused headers
| * | arm64: zynqmp: Add support for e-a2197-00 System ControllerMichal Simek2019-10-241-0/+115
| | | | | | | | | | | | | | | | | | | | | Add support for System Controller available on e-a2197-00 base board. System is very similar to p-a2197-00 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Enables SPI_FLASH_BARMichal Simek2019-10-2416-0/+16
| | | | | | | | | | | | | | | | | | | | | Enable the SPI flash Bank/Extended address register support for all ZynqMP boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: Disable fdt and evn exist for cse_qspiMichal Simek2019-10-241-0/+2
| | | | | | | | | | | | | | | | | | | | | Mini u-boot should be really small that's why it is necessary to disable all unneeded configs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: Remove unused board_early_init_f()Michal Simek2019-10-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | board_early_init_f added by commit e6cc3b25d721 ("arm: zynq: Wire watchdog internals") is no longer needed that's why remove it also with Kconfig enabling. Fixes: ccd063e9812a ("watchdog: Move watchdog_dev to data section (BSS may not be cleared)") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: Dont use 4K sector size support for mini qspi configurationMichal Simek2019-10-241-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch removes 4K sector size support for Zynq mini qspi configuration in favour of fast erase speed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
View Lorry Controller Status