summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* davinci: omapl138_lcdk: add NAND SPL boot supportFabien Parent2016-12-031-0/+3
| | | | | | | | | | NAND SPL boot was missing. Add it. The README specific to omapl138-lcdk is also removed because its content does not apply anymore, i.e. the generated AIS image can be flashed directly to the NAND without using any external tool to create and bootable AIS image. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* davinci: omapl138_lcdk: add u-boot sector for mmc/sd bootFabien Parent2016-12-031-0/+1
| | | | | | | | | | | Set the correct CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR value in order to be able to boot from MMC/SD. The SPL is stored at sector 0x75, while u-boot will follow at sector 0xb5. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: am43x: hs: Modify SPL load address to fix UART boot issueMadan Srinivas2016-12-031-1/+1
| | | | | | | | | | | | | | | | | An issue in the TI secure image generation tool causes the ROM to load the SPL at a different load address than what is specified by CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot. This causes the SPL to fail on secure devices during peripheral boot. The TI secure image generation tool has been fixed so that the SPL will always be loaded at 0x403018E0 by the ROM code for both peripheral and memory boot modes. am43x hs defconfig file have been updated to reflect this change. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* r2dplus: select rtl8139 driver in defconfigVladimir Zapolskiy2016-12-021-0/+2
| | | | | | | | | | | | | | CONFIG_RTL8139 was moved to a board defconfig by a commit 86e9dc86b1a2 ("net: Move CONFIG_RTL8139 to Kconfig"), however it was done incorrectly due to a missing CONFIG_NETDEVICES selection, thus virtually it was just a removal of the driver compilation. As an unlucky consequence the option was completely removed by a purge commit adad96e60d0e ("configs: Re-sync HUSH options"), restore the driver inclusion back. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: am57xx_evm: enable DFU supportSekhar Nori2016-12-022-0/+6
| | | | | | | | | | | | | | | | | AM57xx GP EVM has USB2 port of the SoC exposed as USB client port. It is useful to be able to use this port for USB DFU downloads. Enable USB DFU support. Tested on AM57x GP EVM Rev A3 using DFU to download to connected SD card. configs for HS version of the AM57x EVM are included in the patch but not really tested. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* mvebu: db-88f6820-amc: Enable FIT supportChris Packham2016-12-011-0/+2
| | | | | Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ts4600: Disable CONFIG_DISPLAY_CPUINFOTom Rini2016-11-301-0/+1
| | | | | | | | | | | | Without this change we see: ../arch/arm/cpu/arm926ejs/mxs/mxs.c: In function ‘print_cpuinfo’: ../arch/arm/cpu/arm926ejs/mxs/mxs.c:181:23: warning: unused variable ‘data’ [-Wunused-variable] ../arch/arm/cpu/arm926ejs/mxs/mxs.c:180:6: warning: variable ‘cpurev’ set but not used [-Wunused-but-set-variable] So the easy solution is to disable CONFIG_DISPLAY_CPUINFO Reviewed-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-11-306-0/+87
|\
| * mx6sx: Add initial support for Samtec VIN|ING 2000 boardChristoph Fritz2016-11-301-0/+31
| | | | | | | | | | | | | | | | This patch adds initial support for Samtec VIN|ING 2000 board. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * imx7: SPI: add suport for SPI flash in mikroBUS slotAngus Ainslie2016-11-291-0/+3
| | | | | | | | | | | | | | | | | | | | Enable the escpi3 nets attached to the mikroBUS slot on the i.MX7 Sabre evalution board. Also enble the SPI flash commands to work with the "flash click" board. This is V2 of this patch with changes recommended by the maintainer CC: Jagan Teki <jteki@openedev.com>
| * mx6sx: Add initial support for UDOO Neo BoardBreno Lima2016-11-291-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi <francesco.monte@gmail.com>: https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * ARM: ts4600: add basic board supportSebastien Bourdelin2016-11-291-0/+18
| | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routinesEric Nelson2016-11-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DDR calibration routines are gated by conditionals for the i.MX6DQ SOCs, but with the use of the sysinfo parameter, these are usable on at least i.MX6SDL and i.MX6SL variants with DDR3. Also, since only the Novena board currently uses the dynamic DDR calibration routines, these routines waste space on other boards using SPL. Add a KConfig entry to allow boards to selectively include the DDR calibration routines. Signed-off-by: Eric Nelson <eric@nelint.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-11-2983-27/+546
| |\ | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | mx35: add DT support to flea3 boardHeiko Schocher2016-11-161-0/+4
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-11-29180-318/+284
|\ \ \
| * | | powerpc: T4240: Remove macro CONFIG_PPC_T4240York Sun2016-11-237-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T4240 from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4160: Remove macro CONFIG_PPC_T4160York Sun2016-11-235-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T4160 instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4160RDB: Separate from T4240RDB in KconfigYork Sun2016-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T4160RDB to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4160QDS: Separate from T4240QDS in KconfigYork Sun2016-11-234-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T4160QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081York Sun2016-11-2317-17/+14
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T2080RDB: Rename from T208XRDB in KconfigYork Sun2016-11-236-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T208XQDS: Split as T2080QDS and T2081QDSYork Sun2016-11-2311-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | Use two separated targets in Kconfig to simplify configurations. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDBYork Sun2016-11-2310-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI. CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042RDB: Remove macro CONFIG_T1042RDBYork Sun2016-11-232-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1042RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042D4RDB: Separate from T1042RDB in KconfigYork Sun2016-11-235-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1042D4RDB in Kconfig to simplify config options. Remove macro CONFIG_T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042RDB_PI: Split from T1042RDB in KconfigYork Sun2016-11-235-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use separated TARGET_T1042RDB_PI to simplify config options. Remove macro CONFIG_T1042RDB_PI. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042: Remove macro CONFIG_PPC_T1042York Sun2016-11-2312-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1042 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040RDB: Remove macro CONFIG_T1040RDBYork Sun2016-11-235-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_T1040RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040D4RDB: Separate from T1040RDB in KconfigYork Sun2016-11-235-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040: Remove macro CONFIG_PPC_T1040York Sun2016-11-2313-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T104XRDB: Split to T1040RDB and T1042RDB in KconfigYork Sun2016-11-2322-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to simplify config options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1024: Remove macro CONFIG_PPC_T1024York Sun2016-11-2312-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1024QDS: Rename Kconfig option to match the nameYork Sun2016-11-237-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | Rename TARGET_T102XQDS to TARGET_T1024QDS to match the name. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1023: Remove macro CONFIG_PPC_T1023York Sun2016-11-235-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1023 with ARCH_T1023 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T102xRDB: Split as T1023RDB and T1024RDBYork Sun2016-11-2310-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The defconfig files are separated. Splitting targets in Kconfig simplifies config options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: B4420: Remove macro CONFIG_PPC_B4420York Sun2016-11-233-3/+2
| | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up existing macros.
| * | | powerpc: B4860: Remove macro CONFIG_PPC_B4860York Sun2016-11-235-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_B4860 with ARCH_B4860 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: B4420QDS: Split from B4860QDS in KconfigYork Sun2016-11-233-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_B4420QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P5040: Remove macro CONFIG_P5040York Sun2016-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P5020: Remove macro CONFIG_PPC_P5020York Sun2016-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_P5020 with ARCH_P5020 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-238-16/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to simplify Kconfig and config macros. Remove macro CONFIG_P2020RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1025RDB: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-235-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to simplify Kconfig and config macros. Remove macro CONFIG_P1025RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1024RDB: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-235-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to simplify Kconfig and macros. Remove macro CONFIG_P1024RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1021RDB: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-238-16/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to simplify Kconfig and macros. Remove macro CONFIG_P1021RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in KconfigYork Sun2016-11-234-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC to simplify Kconfig and config macros. Remove macro CONFIG_P1020UTM. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-234-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC to simplify Kconfig and config macros. Remove macro CONFIG_P1020RDB_PD. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-238-16/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC to simplify Kconfig and config macros. Remove macro CONFIG_P1020RDB_PC. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1020MBG: Separate from P1_P2_RDB_PC in KconfigYork Sun2016-11-234-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to simplify Kconfig and other macros. Remove macro CONFIG_P1020MBG. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PBYork Sun2016-11-2328-56/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB and split TARGET_P1010RDB to TARGET_P1010RDB_PA and TARGET_P1010RDB_PB in Kconfig. Signed-off-by: York Sun <york.sun@nxp.com>
View Lorry Controller Status