summaryrefslogtreecommitdiff
path: root/configs/sandbox_defconfig
Commit message (Collapse)AuthorAgeFilesLines
* sandbox: enable USB_KEYBOARD_FN_KEYSHeinrich Schuchardt2019-11-251-0/+1
| | | | | | | Enable the support of function keys on the USB keyboard. This is necessary to test the USB keyboard driver. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* env: Finish migration of common ENV optionsTom Rini2019-11-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini2019-11-201-0/+1
| | | | | | | | | | | Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigTom Rini2019-11-071-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* sandbox: enable command aesPhilippe Reynes2019-10-151-0/+1
| | | | | | | This commit enable the command aes on sandbox. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
* dm: Add a dsi host uclassYannick Fertré2019-10-131-0/+1
| | | | | | | | | Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
* configs: Resync with savedefconfigTom Rini2019-09-231-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: sandbox: enable PCAP capture cmdRamon Fried2019-09-041-0/+1
| | | | | | | Enable CONFIG_CMD_PCAP for testing PCAP capture. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clkWIP/02Aug2019Tom Rini2019-08-021-0/+1
|\ | | | | | | - Port more CCF code to work with i.MX8 devices.
| * configs: sandbox: Enable composite clkPeng Fan2019-07-311-0/+1
| | | | | | | | | | | | Enable composite clk for sandbox test Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski2019-07-291-1/+0
|/ | | | | | | | There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon remove it altogether. Stop building it in sandbox mode. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
* Merge tag 'u-boot-imx-20190719' of ↵Tom Rini2019-07-271-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
| * defconfig: sandbox: Enable SANDBOX_CLK_CCF to reuse generic CCF codeLukasz Majewski2019-07-191-0/+1
| | | | | | | | | | | | Enable by default the Common Clock Framework [CCF] clock code for sandbox. Signed-off-by: Lukasz Majewski <lukma@denx.de>
* | test/py: Add base test case for A/B updatesRuslan Trofymenko2019-07-241-0/+2
|/ | | | | | | | | | | | | Add sandbox test for 'ab_select' command. Test: ./test/py/test.py --bd sandbox --build -k test_ab Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* rtc: add Microcrystal RV-8803 driverMichael Walle2019-07-131-0/+1
| | | | Signed-off-by: Michael Walle <michael@walle.cc>
* configs: Resync with savedefconfigTom Rini2019-06-211-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* net: Convert CONFIG_IP_DEFRAG to KconfigMarek Vasut2019-06-141-0/+1
| | | | | | | | | | Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
* configs: Resync with savedefconfigTom Rini2019-05-261-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigTom Rini2019-04-291-2/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* sandbox: Move pre-console buffer out of the way of tracingSimon Glass2019-04-231-1/+1
| | | | | | | These two buffers currently conflict if tracing is enabled. Move the pre-console buffer and update the documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Enable fdtdec testsThierry Reding2019-04-111-0/+1
| | | | | | | | Enable fdtdec tests on sandbox configurations so that they can be run to validate the fdtdec implementation. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* rockchip: defconfig: Clean the unused pinctrl configDavid Wu2019-02-011-2/+0
| | | | | | | | | If we used the pinctrl-rockchip driver, these config is not needed, so remove them. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* configs: Resync with savedefconfigTom Rini2019-01-191-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* test: bootcount: add bootcount-uclass testPhilipp Tomsich2019-01-141-0/+5
| | | | | | | | Add a test for the bootcount uclass, which uses the RTC bootcount backend (i.e. drivers/bootcount/rtc.c is implictly also tested). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* configs: Resync with savedefconfigTom Rini2019-01-071-6/+3
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* sandbox: Increase the pre-relocation memorySimon Glass2018-12-131-1/+0
| | | | | | | This is close to full now, so increase it to avoid problems with adding more devices. Signed-off-by: Simon Glass <sjg@chromium.org>
* test: dma: add dma-uclass testGrygorii Strashko2018-12-071-0/+3
| | | | | | | | | | Add a sandbox DMA driver implementation (provider) and corresponding DM test. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* dm: Add Hardware Spinlock classBenjamin Gaignard2018-12-061-0/+2
| | | | | | | | | | This is uclass for Hardware Spinlocks. It implements two mandatory operations: lock and unlock and one optional relax operation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* configs: sandbox: enable padding pss for rsa signaturePhilippe Reynes2018-12-031-0/+1
| | | | | Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* configs: Resync with savedefconfigTom Rini2018-11-131-4/+2
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* sandbox: Add a debug UARTSimon Glass2018-10-091-0/+2
| | | | | | | Add support for the debug UART so that sandbox provides build testing for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2018-09-301-0/+2
|\
| * test: Add tests for board uclassMario Six2018-09-291-0/+2
| | | | | | | | | | | | | | Add tests for the new board uclass. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2018-09-291-0/+3
|\ \ | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
| * | video_osd: Add osd sandbox driver and testsMario Six2018-09-281-0/+3
| |/ | | | | | | | | | | | | Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
* | configs: sandbox: add onewire w1 and sandbox eepromEugen Hristev2018-09-281-0/+4
|/ | | | | | | To be able to test Dallas onewire protocol and one wire eeproms driver and subsystem, add in sandbox defconfig the drivers' config. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* efi: sandbox: Enable selftest commandSimon Glass2018-09-231-0/+1
| | | | | | | Enable this for sandbox since it almost passes now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* configs: Resync with savedefconfigTom Rini2018-09-031-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* cmd: Add bind/unbind commands to bind a device to a driver from the command lineJean-Jacques Hiblot2018-08-211-0/+1
| | | | | | | | | | | | | | | | | | | | | In some cases it can be useful to be able to bind a device to a driver from the command line. The obvious example is for versatile devices such as USB gadget. Another use case is when the devices are not yet ready at startup and require some setup before the drivers are bound (ex: FPGA which bitsream is fetched from a mass storage or ethernet) usage example: bind usb_dev_generic 0 usb_ether unbind usb_dev_generic 0 usb_ether or unbind eth 1 bind /ocp/omap_dwc3@48380000/usb@48390000 usb_ether unbind /ocp/omap_dwc3@48380000/usb@48390000 Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-161-0/+1
| | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* sandbox: Add and build AXI bus and deviceMario Six2018-08-111-0/+3
| | | | | | | Add test AXI drivers to the sandbox. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
* configs: Resync with savedefconfigTom Rini2018-08-071-7/+2
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* sandbox: compile both TPM stack versions and driversMiquel Raynal2018-07-281-0/+3
| | | | | | | | | Now that TPMv1 and TPMv2 can be compiled at the same time, let's compile them both with Sandbox as well as both drivers (and, it is already implied in Kconfig: both commands). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* drivers: smem: sandboxRamon Fried2018-07-191-0/+2
| | | | | | | Add Sandbox driver for SMEM. mostly stub operations. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* configs: Resync with savedefconfigTom Rini2018-06-041-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: add TPMv2.x support in SandboxMiquel Raynal2018-05-251-0/+1
| | | | | | | | Enable the Sandbox TPMv2 driver in all possible configurations. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* sandbox: Enable MC34708 PMIC supportLukasz Majewski2018-05-181-0/+1
| | | | | | | | This MC34708 PMIC is somewhat special - it used single transfers (R/W) with 3 bytes size - up till now U-Boot's PMICs only used 1 byte. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* configs: Resync with savedefconfigTom Rini2018-04-281-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to KconfigMario Six2018-04-081-0/+1
| | | | | | | | Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* SystemACE: RemoveTom Rini2018-02-131-3/+0
| | | | | | | | | | | | This driver is no longer used on any supported platform in U-Boot and there is no interest in maintaining it further from people that have used it historically. Cc: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> c: Alexey Brodkin <alexey.brodkin@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
View Lorry Controller Status