summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* samsung: board: init the s2mps11 pmic during booting timeJaehoon Chung2018-05-021-0/+4
| | | | | | | | | Exynos5422 board has s2mps11 pmic. If CONFIG_PMIC_S2MPS11 is enabled, it can initialize PMIC and Regulators during booting time. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
* Merge git://git.denx.de/u-boot-imxTom Rini2018-04-306-21/+42
|\
| * imx6ul: opos6ul: add SPL_DM supportSébastien Szymanski2018-04-261-19/+1
| | | | | | | | | | | | | | | | | | Since commit commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support makes the board boot again. Fixes: commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
| * warp7: secure_defconfig: Remove secure_defconfigBryan O'Donoghue2018-04-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes warp7_secure_defconfig. A previous patch set CONFIG_ARMV7_BOOT_SEC_DEFAULT=y on the unsecure WaRP7 config. Fabio asked if I could confirm that the NXP and upstream kernels will boot on the WaRP7 with CONFIG_ARMV7_BOOT_SEC_DEFAULT=y. I can confirm that this is the case, so there's no need to support the secure defconfig - drop it now. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Suggested-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx7dsabresd: Remove the mx7dsabresd_secure_defconfig targetFabio Estevam2018-04-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx7dsabresd_secure_defconfig was introduced to allow booting NXP kernel that has CAAM support and needs to boot in secure mode. Instead of keeping two different config targets for the same board, remove mx7dsabresd_secure_defconfig and select CONFIG_ARMV7_BOOT_SEC_DEFAULT inside mx7dsabresd_defconfig so that this target could be used to boot both mainline and the vendor kernel. This makes maintenance task easier and avoid potentially confusion for the end user. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
| * warp7: Add Kconfig WARP7_ROOT_PARTBryan O'Donoghue2018-04-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | Adding CONFIG_WARP7_ROOT_PART allows a defconfig to specify which partition is use as the root partition on WaRP7, this is a desirable change in order to support a different partitioning schemes. The default is the current partition #2. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: Make CONFIG_SYS_FDT_ADDR a defineBryan O'Donoghue2018-04-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | In order to sign images with the IMX code-signing-tool (CST) we need to know the load address of a given image. The best way to derive this load address is to make it into a define - so that u-boot.cfg contains the address - which we can then parse when generating the IMX CST headers. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: Print out the OPTEE DRAM regionBryan O'Donoghue2018-04-261-0/+10
| | | | | | | | | | | | | | | | | | | | Right now a region of 0x300000 bytes is allocated at the end of DRAM for the purposes of loading an OPTEE firmware inside of it. This patch adds the printout of the relevant address ranges. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: Allocate specific region of memory to OPTEEBryan O'Donoghue2018-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Subtracts CONFIG_OPTEE_TZDRAM_SIZE from the available DRAM size. On WaRP7 we simply define the OPTEE region as from the maximum DRAM address minus CONFIG_OPTEE_TZDRAM_SIZE bytes. Note the OPTEE boot process will itself subtract the DRAM region it lives in from the memory map passed to Linux. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: hab: Set environment variable indicating HAB enableBryan O'Donoghue2018-04-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds an environment variable called "hab_enabled" which gets set to a boolean status indicating whether HAB is enabled or not. Subsequent patches can use this environment variable to determine if its necessary to run a given binary through the hab_auth_img console command. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: hab: Add a CSF location definitionBryan O'Donoghue2018-04-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to correctly produce an image with a IVT/DCD header we need to define a CSF in imximage.cfg. We just use the mx7 default here. All we have to do with this option switched on is "make u-boot.imx" and we then will get - u-boot.imx - u-boot.imx.log The log file is really important because it gives the addresses for the HAB that we will require to sign the u-boot image using the CST. Since the addresses can change this logfile is a critical output. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* | spl: ti: Avoid serial calls when serial support is disabledAlex Kiernan2018-04-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_SPL_SERIAL_SUPPORT is not set, then the build will fail: board/ti/am335x/built-in.o: In function `spl_start_uboot': board/ti/am335x/board.c:247: undefined reference to `serial_tstc' board/ti/am335x/board.c:247: undefined reference to `serial_getc' Avoid the calls to the serial functions in that case. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
* | Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini2018-04-2771-141/+0
| | | | | | | | | | | | | | | | We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: rmobile: Fix PMIC address on E2 SilkMarek Vasut2018-04-261-1/+1
| | | | | | | | | | | | | | The PMIC is at 0x5a, fix the address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Update E2 AltMarek Vasut2018-04-263-153/+473
| | | | | | | | | | | | | | | | | | The E2 Alt port was broken since some time. This patch updates the E2 Alt port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Update M2-N GoseMarek Vasut2018-04-263-134/+472
| | | | | | | | | | | | | | | | | | The M2-N Gose port was broken since some time. This patch updates the M2-N Gose port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Update H2 LagerMarek Vasut2018-04-263-153/+455
|/ | | | | | | | | The H2 Lager port was broken since some time. This patch updates the H2 Lager port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: zynq: Wire automatic ddr detection for Zynq and ZynqMP caseMichal Simek2018-04-232-2/+4
| | | | | | | | When static memory configuration is used U-Boot has capability to detect memory size in setup range. Enable this feature for static configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: rmobile: Update E2 SilkMarek Vasut2018-04-213-129/+488
| | | | | | | | | | | | | | The E2 Silk port was broken since some time. This patch updates the E2 Silk port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: The port is missing support for I2C1 for DA9063 reset, since the I2C driver needs to be converted to DM and DT probing. That's not an issue for this patch though, since the reset was broken on Silk since forever.
* ARM: rmobile: Update M2 KoelschMarek Vasut2018-04-173-141/+462
| | | | | | | | | The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Ignore U-Boot env when started via JTAG on PorterMarek Vasut2018-04-171-0/+16
| | | | | | | | When U-Boot is started via JTAG, ignore the installed environment as it may interfere with the recovery of the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Ignore U-Boot env when started via JTAG on StoutMarek Vasut2018-04-171-0/+15
| | | | | | | | When U-Boot is started via JTAG, ignore the installed environment as it may interfere with the recovery of the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* x86: Rename coreboot-x86 to corebootSimon Glass2018-04-161-1/+1
| | | | | | | | | We only use coreboot as a target on x86 platforms, since on ARM platforms U-Boot always runs as the primary boot loader. Rename the coreboot-x86 platform to reflect this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge git://git.denx.de/u-boot-imxTom Rini2018-04-1521-815/+808
|\ | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
| * mx6cuboxi: Fix some memory configuration errorsJon Nettleton2018-04-151-2/+1
| | | | | | | | | | | | | | | | These changes bring mainline back into line with the configurations that were originally set in our stable BSP. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx31ads: DeleteTom Rini2018-04-156-521/+0
| | | | | | | | | | | | This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
| * imx31_phycore: DeleteTom Rini2018-04-155-274/+0
| | | | | | | | | | | | This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
| * boot: script: The boot.scr file for K+P's boardsLukasz Majewski2018-04-151-0/+96
| | | | | | | | | | | | | | | | | | | | | | By using this file one can avoid cluttering <board>.h file with u-boot HUSH commands necessary for booting target device. With such approach the commands are stored only in one place and can be reused if needed. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: board: Add support for the K+P's kp_imx6q_tpc boardLukasz Majewski2018-04-155-0/+669
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit provides support for Kieback & Peter GmbH IMX6Q based TPC board. U-boot console output: U-Boot SPL 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) Trying to boot from MMC1 U-Boot 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 37C Reset cause: POR Board: K+P KP_IMX6Q_TPC i.MX6Q Watchdog enabled I2C: ready DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: FEC [PRIME] Autoboot in 3 seconds
| * board: ge: bx50v3: enable backlight on demandIan Ray2018-04-151-17/+28
| | | | | | | | | | | | | | | | | | Enable display backlight only if a message needs to be displayed. The kernel re-initializes the backlight, which results in some unwanted artifacts. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
| * warp7: Set u-boot serial# based on OTP valueBryan O'Donoghue2018-04-151-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot has a standard "serial#" environment variable that is suitable for storing the iSerial number we will supply via the USB device descriptor. serial# is automatically picked up by the disk subsystem in u-boot - thus providing a handy unique identifier in /dev/disk/by-id as detailed below. Storing the hardware serial identifier in serial# means we can change the serial# if we want before USB enumeration - thus making iSerial automatic via OTP but overridable if necessary. This patch reads the defined OTP fuse and sets environment variable "serial#" to the value read. With this patch in place the USB mass storage device will appear in /dev/disk/by-id with a unique name based on the OTP value. For example /dev/disk/by-id/usb-Linux_UMS_disk_0_WaRP7-0xf42400d3000001d4-0:0 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rui Miguel Silva <rui.silva@linaro.org> Cc: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * wandboard: remove superfluous includeHeinrich Schuchardt2018-03-291-1/+0
| | | | | | | | | | | | | | No definition provided by input.h is used in the board file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* | ARM: rmobile: Convert TPL to SPLMarek Vasut2018-04-132-38/+30
| | | | | | | | | | | | | | | | | | | | There is currently no use for building the SPL anymore, since the SPI loader can easily be replaced by TPL and TPL does load U-Boot directly. Upgrade TPL to SPL and replace what used to be SPL with it. This way we build the U-Boot sources only twice, not thrice. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Update H2 StoutMarek Vasut2018-04-134-128/+510
| | | | | | | | | | | | | | | | | | | | The H2 Stout port was broken since some time. This patch updates the H2 Stout port to use modern frameworks, DM, DT probing, SPL and TPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Fix LBSC programming offset on M2 PorterMarek Vasut2018-04-131-2/+2
| | | | | | | | | | | | | | The offset of CSWCRx starts at 0x30, fix this. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | vexpress: fix syntax error in armv7_boot_nonsec_default()Heinrich Schuchardt2018-04-131-1/+1
| | | | | | | | | | | | | | With CONFIG_ARMV7_BOOT_SEC_DEFAULT=y a syntax error occurs. Add the missing semicolon. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | ARM: rmobile: Add JTAG recovery support for M2 PorterMarek Vasut2018-04-111-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add JTAG recovery support into the M2 Porter TPL. This allows the TPL to be loaded over JTAG, initialize the system, wait for the JTAG debugger to load U-Boot image into RAM and then resume and start U-Boot from RAM. The procedure is as follows: 1) Load u-boot-tpl.bin to 0xe6300000 2) Write magic number 0x1337c0de to 0xe6300020 TPL checks for this particular magic and starts JTAG recovery if this number is present. This is not present by default. 3) Start U-Boot TPL from 0xe6300000 4) Wait for a message from TPL on UART indicating JTAG boot: "JTAG boot detected!" 5) Halt the system in JTAG debugger 6) Load U-Boot image (u-boot.img) to 0x4fffffc0 7) Write magic number 0xb33fc0de to 0xe6300024 TPL checks for this particular magic to verify that the U-Boot image was loaded into DRAM by the JTAG debugger. 8) Resume the system in JTAG debugger Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Add TPL support on R8A7791 M2 PorterMarek Vasut2018-04-111-0/+419
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add and enable TPL on M2 Porter. The TPL must fit into 16 kiB due to the Gen2 BootROM restriction. The TPL is running from MERAM and is capable of performing the initial initialization of PFC, Clock, GPIO, LBSC, DBSC and QSPI NOR. DBSC is responsible for bringing up the DDR DRAM access. The TPL is capable of loading the next stage, U-Boot, from either SPI NOR or UART as a fallback. If either does provide a valid U-Boot uImage, the system stops, which allows the operator to load U-Boot ie. via JTAG and start it manually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: rmobile: Split U-Boot and SPL sources on PorterMarek Vasut2018-04-113-22/+59
| | | | | | | | | | | | | | | | | | Pull the SPL code from porter.c into a separate file in preparation for the addition of system initialization code. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblazeTom Rini2018-04-0913-0/+9251
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xilinx changes for v2018.05-rc2 - Various DT changes and sync with mainline kernel - Various defconfig updates - Add SPL init for zcu102 revA - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX and zc1751-dc3 - Net fixes - xlnx,phy-type - 64bit axi ethernet support - arasan: Fix nand write issue - fpga fixes - Maintainer file updates
| * | arm64: zynqmp: Add support for Xilinx zcu106-revAMichal Simek2018-04-091-0/+802
| | | | | | | | | | | | | | | | | | Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for zcu104 customer boardMichal Simek2018-04-092-0/+879
| | | | | | | | | | | | | | | | | | | | | Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for zc12xx boardsMichal Simek2018-04-093-0/+1213
| | | | | | | | | | | | | | | | | | | | | Add support for zc12xx boards. All of them are internal boards for silicon validation and share very similar base platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for zc1751 dc3Michal Simek2018-04-091-0/+900
| | | | | | | | | | | | | | | | | | | | | zc1751 is based board with dc3 extenstion card which is used for silicon validation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for zcu100 aka Ultra96 boardMichal Simek2018-04-091-0/+993
| | | | | | | | | | | | | | | | | | Add support for Xilinx zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add low level initialization for zc1751Michal Simek2018-04-094-0/+3638
| | | | | | | | | | | | | | | | | | Add psu init for zc1751 dc cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add low level initialization for zcu102-revAMichal Simek2018-04-091-0/+826
| | | | | | | | | | | | | | | | | | Add psu init for zcu102-revA. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | net: Move enetaddr env access code to env config instead of net configAlex Kiernan2018-04-0849-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
* | | ti: am335x: Fix build when networking is disabledAlex Kiernan2018-04-081-4/+4
|/ / | | | | | | | | | | | | | | | | | | When compiling without CONFIG_CLOCK_SYNTHESIZER (which is implied by CONFIG_DRIVER_TI_CPSW for am335x_evm), exclude the network setup for AM335x-ICEv2 to avoid link time failures: board/ti/am335x/board.c:683: undefined reference to `setup_clock_synthesizer' Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
* | board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in ↵Vignesh R2018-04-061-2/+16
| | | | | | | | | | | | | | | | | | | | | | U-boot AM437x QSPI boot is a single stage boot and hence needs runtime DTB selection to support AM437x-SK and AM437x-IDK with DM enabled. This is required to move am43xx_evm_qspiboot_defconfig to use DM/DT. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
View Lorry Controller Status