summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdefAndrew F. Davis2019-03-222-20/+20
| | | | | | | | | | When these were moved from mach-omap2 to board files they got placed inside TI_SECURE_DEVICE ifdef block, they are not secure only, move them up and out. Fixes: 413b90777f8d ("ti: fastboot: Move weak overrides to board files") Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2019-03-156-37/+40
|\ | | | | | | - DPAA2 fixes and DDR errata workaround for LS1021A
| * armv7: ls102xa: Add workaround for DDR erratum A-008850Alison Wang2019-03-155-30/+9
| | | | | | | | | | | | | | | | | | | | Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * board: fsl: lx2160aqds: modify the phy fixup codePankaj Bansal2019-03-151-7/+31
| | | | | | | | | | | | | | | | | | | | | | | | Now that we are representing the MDIO mux in LX2160AQDS board in producer/consumer terms, the consumer nodes' has been changed. Therefore, modify the device tree fixups according to change in device tree. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2019-03-146-19/+109
|\ \ | |/ |/|
| * arndale: fix unknown statusMinkyu Kang2019-03-141-1/+1
| | | | | | | | | | | | | | set status to Maintained Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org>
| * arm: exynos: odroid: Fix build if BOARD_TYPES are not setKrzysztof Kozlowski2019-03-111-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_BOARD_TYPES is necessary for Odroid X/X2/U3 boards to detect proper revision. However building should succeed even without it. While moving code around, document also the reference clock selection. This fixes the build error without CONFIG_BOARD_TYPES: board/samsung/odroid/odroid.c: In function 'board_usb_init': board/samsung/odroid/odroid.c:473:8: error: 'gd_t' {aka 'volatile struct global_data'} has no member named 'board_type' if (gd->board_type == ODROID_TYPE_U3) ^~ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: Remove duplicated "boardname" env settingKrzysztof Kozlowski2019-03-112-6/+6
| | | | | | | | | | | | | | | | | | | | Various places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "board_name". Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: arndale: Replace Chander Kashyap inactive maintainerKrzysztof Kozlowski2019-03-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | Last activity from Arndale (Exynos5250) board maintainer Chander Kashyap was in January 2014 (Signed-off). Recently his samsung.com email bounces with 550 (5.1.1 Recipient address rejected: User unknown). Add Krzysztof Kozlowski as odd fixer for this board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revisionKrzysztof Kozlowski2019-03-111-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix detection of Odroid HC1 (Exynos5422) after reboot if kernel disabled the LDO4/VDD_ADC regulator. The LDO4 supplies both ADC block and the ADC input AIN9. Voltage on AIN9 will rise slowly, so use delay of 5 milliseconds instead of timers-based loop to wait for voltage stabilization. First reads on Odroid HC1 return 305, 1207, 1297 and finally 1308 (reference value is 1309). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: odroid-xu3: Display info late to have proper typeKrzysztof Kozlowski2019-03-111-1/+1
| | | | | | | | | | | | | | | | | | Printing the "Type" of board requires proper detection of revision which can happen only late because regulators are needed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: Detect revision later, when all resources are readyKrzysztof Kozlowski2019-03-113-4/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Detection of board revision is done early - before power setup. In case of Odroid XU3/XU4/HC1 family, the detection is done using ADC which is supplied by LDO4/VDD_ADC regulator. This regulator could be turned off (e.g. by kernel before reboot). If ADC is used early, the regulators are not yet available and the detection won't work. Split the revision detection out of set_board_type() into separate function called later - either when displaying board info (in late mode) or during misc_init_r. The idea is that set_board_type() will be called early so its method of detection are limited to flattened device tree (exynos5-dt-types.c for Exynos5) or GPIO (odroid.c for Exynos4412). The newly added set_board_revision() can be called only later, when resources like regulator are available. This is necessary to fix the detection of Odroid HC1 after reboot, if kernel turned off the LDO4 regulator. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | board: engicam: Add watchdog support on EngicamShyam Saini2019-03-131-0/+5
| | | | | | | | | | | | | | This patch adds watchdog support for engicam imx6 family of boards. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
* | imx8mq_evk: Add myself as a co-maintainerFabio Estevam2019-03-131-0/+1
| | | | | | | | | | | | | | I would like to help maintaining this board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* | mx6sabreauto: README: Adjust the binary name after DM conversionFabio Estevam2019-03-131-6/+6
| | | | | | | | | | | | | | | | After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* | mx6sabresd: README: Adjust the binary name after DM conversionFabio Estevam2019-03-131-9/+9
| | | | | | | | | | | | | | | | After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* | imx: mx6qsabrelite: Update the SabreLite READMEMartyn Welch2019-03-131-36/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The information in the SabreLite README is inaccurate and sparse. The upstream U-Boot can boot the SabreLite from SPI-NOR. Additionally, the freely available imx_loader tool can be easily used to boot a board with a corrupted SPI, the official Freescale/NXP manufacturing tools are not required. Reformat the document, adding a description of how to boot from SPI-NOR and adding a brief description of how to recover the board should the SPI-NOR be corrupted using imx_loader. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
* | imx8mq_evk/README: fix DDR training firmware pathBaruch Siach2019-03-131-1/+1
| | | | | | | | | | | | | | | | | | Remove a redundant directory level. Reported-by: Ofer Heifetz <ofer.heifetz@valens.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | imx8mq_evk/README: add missing firmware extract stepBaruch Siach2019-03-131-0/+1
| | | | | | | | | | | | Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | warp7: Fix the write to the LDOGCTL PMIC registerFabio Estevam2019-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The third parameter of the pmic_clrsetbits() function is the mask to the register and the correct mask is 1 not 0. Since the LDOGCTL only contains a single valid bit (bit 0), we can use pmic_reg_write() and write 1 directly, which fixes the problem in a simpler way and use the original pmic function that was used prior to the DM PMIC conversion. Fixes: 8ba377321c86 ("arm: imx7s-warp: Convert to DM PMIC") Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | mx6ul_14x14_evk: Simplify the PMIC register writesFabio Estevam2019-03-131-6/+3
| | | | | | | | | | | | | | | | There is no need to store the values written to the PMIC inside the 'reg' variable. Make it simpler by writing the values directly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | warp7: Remove unneeded headers after DM conversionFabio Estevam2019-03-131-4/+0
| | | | | | | | | | | | | | After DM conversion the I2C and MMC related board codes have been removed, so remove the corresponding header files as well. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | warp7: README: Adjust the binary name after DM conversionFabio Estevam2019-03-131-6/+6
| | | | | | | | | | | | | | | | | | After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
* | imx: ventana: added support for 16bit 8Gb density (1GiB) DRAMTim Harvey2019-03-131-0/+5
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | imx: ventana: hexdump invalid EEPROM dataTim Harvey2019-03-131-0/+10
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | ARM: liteboard: move towards driver model and device-tree bootMarcin Niestroj2019-03-131-36/+0
| | | | | | | | | | | | | | | | | | This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove USB code that is on longer executed after enabling CONFIG_DM_USB. Enable CONFIG_PINCTRL, so we can get rid of ethernet pin configuration. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* | pico-imx6ul: README: Adjust the binary name after DM conversionFabio Estevam2019-03-131-7/+7
| | | | | | | | | | | | | | | | After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | pico-imx6ul: Convert to DM_PMICFabio Estevam2019-03-131-47/+14
| | | | | | | | | | | | | | | | | | | | | | Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is under an I2C bus, conver to DM_I2C as well. Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT to avoid build warnings. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | pico-imx6ul: Convert to CONFIG_DM_GPIOFabio Estevam2019-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | Convert to CONFIG_DM_GPIO. Also, DM GPIO requires gpio_request() to be called explicitly before doing any gpio operation, so do as requested. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | pico-imx6ul: Convert to DM MMCFabio Estevam2019-03-131-34/+0
| | | | | | | | | | | | | | | | | | Select CONFIG_DM_MMC=y in order to support MMC driver model. This allows the MMC board related code to be removed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | ARM: socfpga: Fix A10 SoCDK KconfigMarek Vasut2019-03-091-1/+1
|/ | | | | | | | | | | | The Kconfig checked for SoCFPGA Arria10 as a platform, instead of checking for specific board configuration, which works with one single platform in tree, but not with multiple. Fix it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2019-03-041-5/+7
|\ | | | | | | | | | | | | - Enable DHCP as boot-source in distro boot for NXP layerscape platforms - fix register layout for SEC on Layerscape architectures - fixes related to DPAA2 ethernet
| * board: ls1088a: fix fsl-mc search pathMian Yousaf Kaukab2019-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Path for fsl-mc node in kernel device-tree is /soc/fsl-mc whereas in u-boot it is /fsl-mc. Fix the incorrect search path to fix following error: fdt_fixup_board_enet: ERROR: fsl-mc node not found in device tree (error -1) Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * board: ls1088a: fix dppa exit when using efi bootMian Yousaf Kaukab2019-03-031-4/+6
| | | | | | | | | | | | | | | | | | Same issue for ls2080a was fixed by following patch: b7b8410a8f ls2080: Exit dpaa only right before exiting U-Boot Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | powerpc: t104xrdb: Add support of MTA9ADF1G72AZ DDRPeng Ma2019-03-021-0/+1
|/ | | | | | | | | T1040RDB has been upgraded to support new DDR ie. MTA9ADF1G72AZ-3G2, 8GB. So adding support of new DDR part by updating board_specific_parameters udimm0. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2019-02-281-5/+7
|\ | | | | | | - Various Bananapi fixes
| * sunxi: Add Bananapi M2+ H5 boardChen-Yu Tsai2019-02-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the H5 is pin compatible with the H3, vendors tend to upgrade their existing H3 products with an H5 SoC swap. This is the case with the Bananapi M2+ H5. Add the following to support it: - device tree file: synced from Linux v5.0-rc1, - defconfig: copy of bananapi_m2_plus_h3_defconfig with only SoC family and default device tree file name changed - MAINTAINERS entry Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3Chen-Yu Tsai2019-02-181-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used. To support the H5 variant of this board, the "H3" suffix is added to the defconfig name. Also add myself as one of the board maintainers. As the device tree files were already correctly named, they do not require any changes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: removed unneeded message from commit body] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | arm: pdu001: Fix order of include filesFelix Brack2019-02-281-1/+1
| | | | | | | | | | | | Fix the order of include files according to U-Boot coding style. Signed-off-by: Felix Brack <fb@ltec.ch>
* | riscv: Add SiFive FU540 board supportAnup Patel2019-02-274-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | riscv: Rename cpu/qemu to cpu/genericAnup Patel2019-02-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The QEMU CPU support under arch/riscv is pretty much generic and works fine for SiFive Unleashed as well. In fact, there will be quite a few RISC-V SOCs for which QEMU CPU support will work fine. This patch renames cpu/qemu to cpu/generic to indicate the above fact. If there are SOC specific errata workarounds required in cpu/generic then those can be done at runtime in cpu/generic based on CPU vendor specific DT compatible string. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2019-02-208-1/+74
|\ \
| * | board: toradex: turn off lcd backlight before OS handoverGerard Salvatella2019-02-208-1/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot typically tears down the display controller before handing control over to Linux. On LCD displays disabling pixel clock leads to a fading out effect with vertical/horizontal lines. Make sure to disable back light before booting Linux. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2019-02-2012-0/+1946
|\ \ \ | |/ / |/| | | | | | | | - Support of NXP's LX2160RDB and LX2160QDS platform - Enable SATA DM model for NXP's ARM SoCs
| * | lx2160aqds : Add support for LX2160AQDS platformPankaj Bansal2019-02-196-1/+1233
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * | board/lx2160a: Add init_func_vid() definitionPriyanka Jain2019-02-191-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add init_func_vid() which calls adjust_vdd() This ensures adjust_vdd() is called via init_sequence_f[] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * | armv8: lx2160: Add secure boot target and enable distro boot.Udit Agarwal2019-02-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds esbc validate command for verification of MC and DPC firmware, along with secure boot defconfig. Also enable distro boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> [PK: squash "enable DM support for SATA patch" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * | lx2160: Enable support of EMC2305Meenakshi Aggarwal2019-02-191-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable support for FAN controller EMC2305 for LX2160A RDB board. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [PK: enable EMC2305 for lx2160rdb] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * | armv8: emc2305: add support for fan controllerMeenakshi Aggarwal2019-02-193-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | Add support for fan controller emc2305. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
| * | armv8: lx2160ardb : Add support for LX2160ARDB platformPriyanka Jain2019-02-198-0/+625
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
View Lorry Controller Status