summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'u-boot-rockchip-20201031' of ↵WIP/30Oct2020Tom Rini2020-10-308-2/+57
|\ | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - New PX30 board: Engicam PX30.Core; - Fix USB HID support for rock960; - Remove host endianness dependency for rockchip mkimage; - dts update for rk3288-tinker; - Enable console MUX for some ROCKPi boards; - Add config-based ddr selection for px30;
| * rockchip: Add Engicam PX30.Core C.TOUCH 2.0Jagan Teki2020-10-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
| * rockchip: Add Engicam PX30.Core EDIMM2.2 Starter KitJagan Teki2020-10-304-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam. PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
| * board: engicam: Attach i.MX6 common codeJagan Teki2020-10-304-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | The existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful. Add support for it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
* | Merge tag 'dm-pull-30oct20' of ↵Tom Rini2020-10-301-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-dm of-platdata and dtoc improvements sandbox SPL tests binman support for compressed sections
| * | sandbox: Drop ad-hoc device declarations in SPLSimon Glass2020-10-291-0/+2
| | | | | | | | | | | | | | | | | | | | | Since sandbox's SPL is build with of-platadata, we should not use U_BOOT_DEVICE() declarations as well. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge tag 'xilinx-for-v2021.01-v2' of ↵Tom Rini2020-10-2917-193/+1496
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.01-v2 common: - Add support for 64bit loadables from SPL xilinx: - Update documentation and record ownership - Enable eeprom board detection based legacy and fru formats - Add support for FRU format microblaze: - Optimize low level ASM code - Enable SPI/I2C - Enable distro boot zynq: - Add support for Zturn V5 zynqmp: - Improve silicon detection code - Enable several kconfig options - Align DT with the latest state - Enabling security commands - Enable and support FPGA loading from SPL - Optimize xilinx_pm_request() calling versal: - Some DTs/Kconfig/defconfig alignments - Add binding header for clock and power zynq-sdhci: - Add support for tap delay programming zynq-spi/zynq-qspi: - Use clock framework for getting clocks xilinx-spi: - Fix some code issues (unused variables) serial: - Check return value from clock functions in pl01x
| * | xilinx: Consolidate board_fit_config_name_match() for Xilinx platformsMichal Simek2020-10-291-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move board_fit_config_name_match() from Zynq/ZynqMP to common location. This change will open a way to use it also by Microblaze and Versal. Through this function there is a way to handle images with multiple DTBs. For now match it with DEVICE_TREE as is done for Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | mmc: zynq_sdhci: Add common function to set input/output tapdelaysAshok Reddy Soma2020-10-291-157/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove setting tapdelays for different speeds separately. Instead use the ITAP and OTAP delay values which are read from the device tree. If the DT does not contain tap delay values, the predefined values will be used for the same. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * | mmc: Define timing macro'sAshok Reddy Soma2020-10-271-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define timing macro's for all the available speeds of mmc. This is done similar to linux. Replace speed macro's used with these new timing macro's wherever applicable. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * | microblaze: Wire generic xilinx board_late_init_xilinx()Michal Simek2020-10-272-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Call generic board_late_init_xilinx() to be aligned with the rest of xilinx platforms. Also getting rid of initrd_high/fdt_high and use bootm_low/boot_size instead. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: Merge together BOOT_SCRIPT_OFFSET between MB and ARMMichal Simek2020-10-272-8/+3
| | | | | | | | | | | | | | | | | | There is no reason not to use commong Kconfig by Microblaze too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: Add DDR base address to bootscript addressT Karthik Reddy2020-10-271-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ram base address to scriptaddr env variable to make boot script address to be a valid address when ddr base address changes. This works properly if the first memory region is the region where uboot runs. Also the solution was taken in respect of a lot of jtag script putting u-boot script to certain address. For standard cases bd->bi_dram[0].start is 0 all the time. Only for systems with DDR placed out of this location it does calculation. This is not the best solution and should be done differently in future but enough for now till we don't have full solution ready yet. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: zynqmp: Use tab for macro indentationMichal Simek2020-10-271-6/+6
| | | | | | | | | | | | | | | | | | | | | Trivial fix. Fixes: fa793165daf7 ("xilinx: zynqmp: refactor silicon name function") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: zynqmp: Do not check 0 as invalid return from snprintfMichal Simek2020-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot SPL on ZynqMP is using CONFIG_SPL_USE_TINY_PRINTF which doesn't return any return value and all the time returns 0. That's why even correct snprintf was returning in SPL chip ID as "unknown". Change checking condition and allow snprintf to return 0 which is according manual patch successful return. "If an output error is encountered, a negative value is returned." Fixes: 43a138956f7e ("arm64: zynqmp: Get rid of simple_itoa and replace it by snprintf") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: zynqmp: Fix debug message in zynqmp_get_silicon_idcode_name()Michal Simek2020-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix hex format from 0x%0X to 0x%0x to show correct numbers. Fixes: fa793165daf7 ("xilinx: zynqmp: refactor silicon name function") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: zynqmp: Check return value from xilinx_pm_request()Michal Simek2020-10-271-1/+5
| | | | | | | | | | | | | | | | | | | | | xilinx_pm_request() can failed that's why also check return value. Fixes: 050f10f103cd ("xilinx: zynqmp: remove chip_id function") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: board: Add FRU decoder supportMichal Simek2020-10-271-1/+82
| | | | | | | | | | | | | | | | | | | | | FMC cards are using FRU format for card identification. That's why add support for this format. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: cmd: Add basic fru format generatorMichal Simek2020-10-273-2/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Idea is to have something what can be used for board bringup from generic board perspective. There is a violation compare to spec that FRU ID is ASCII8 instead of binary format but this is really for having something to pass boot and boot to OS which has better generating options. Also time should be filled properly. For example: fru board_gen 1000 XILINX versal-x-prc-01-revA serialX partX There is also support for revision field which is Xilinx specific field. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: cmd: Add support for FRU commandsSiva Durga Prasad Paladugu2020-10-276-0/+414
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for fru commands "fru capture" and "fru display". The fru capture parses the FRU table present at an address and stores in a structure for later use. The fru display prints the content of captured structured in a readable format. As of now, it supports only common header and board area of FRU. Also, it supports only English language code and ASCII8/BINARY formats. fru_data variable is placed to data section because fru parser can be called very early before bss is initialized. And also information needs to be shared that's why it is exported via header. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: common: Add Makefile to common folderMichal Simek2020-10-274-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | There is no need to reference files in common folder back. Simply adding Makefile to this folder does the job because this "common" location is already wired in main Makefile. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: common: Protect board_late_init_xilinx()Michal Simek2020-10-271-0/+2
| | | | | | | | | | | | | | | | | | Do not call board_late_init_xilinx() when BOARD_LATE_INIT is not enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board KconfigMichal Simek2020-10-271-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to have ZYNQ specific Kconfig macro in generic location to be visible for all other SoCs. That's why move it to Xilinx common location to be visible only for us. Also introduce new bool entry ZYNQ_MAC_IN_EEPROM to have also an option to disable it or enable. This has connection to code which is reading the whole content of i2c and also work with the rest of date not just with MAC address. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: board: Add support for additional card detectionMichal Simek2020-10-271-24/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | The most of Xilinx evaluation boards have FMC connectors which contain small eeprom for card identification. That's why read content of eeprom and record it. Also generate cardX_ variables for easier script handling. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | xilinx: board: Read the whole eeprom not just offsetMichal Simek2020-10-274-1/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starts to use new way how eeproms should be referenced. Reference is done via nvmem alias nodes. When this new way is specified code itself read the eeprom and decode xilinx legacy format and fill struct xilinx_board_description. Then based on information present there board_* variables are setup. If variables are saved and content can't be changed information is just shown on console. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for saving sha3 key to different addressMichal Simek2020-10-271-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default 48B sha3 hash value is written to srcaddr which is not the best solution in case of that you want to use data for other operations. That's why add key_addr optional parameters which enables to write 48B sha3 hash value to specified address. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
| * | arm64: zynqmp: Add support for SHA3 commandT Karthik Reddy2020-10-271-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for SHA3 command. It takes data blob as input and generates 48 bytes sha3 hash value. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for RSA commandT Karthik Reddy2020-10-271-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for RSA command, performs RSA encrypt & RSA decrypt on data blob of key size. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add support for encryption and decryption on data blobSiva Durga Prasad Paladugu2020-10-271-1/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for encryption and decryption on a given data blob using different key sources such as userkey(KUP), device key and PUF key. Inorder to support this a new zynqmp command(zynqmp aes) has been introduced. Command: zynqmp aes srcaddr ivaddr len aesop keysrc dstaddr [keyaddr]\n" Encrypts or decrypts blob of data at src address and puts it\n" back to dstaddr using key and iv at keyaddr and ivaddr\n" respectively. keysrc values specifies from which source key\n" has to be used, it can be User/Device/PUF key. A value of 0\n" for KUP(user key),1 for DeviceKey and 2 for PUF key. The\n" aesop value would specify the operationwhich can be 0 for\n" decrypt and 1 for encrypt(1) operation\n"; Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Get rid of simple_itoa and replace it by snprintfMichal Simek2020-10-271-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | simple_itoa() is implemented only for !CONFIG_USE_TINY_PRINTF. Tiny printf is normally used by SPL that's code which uses simple_itoa() has missing reference. That's why refactor code by using on snprintf() instead of strncpy()/strncat() combination. This change also descrease code size by saving 24B based on buildman. aarch64: (for 1/1 boards) all -22.0 rodata +2.0 text -24.0 xilinx_zynqmp_virt: all -22 rodata +2 text -24 u-boot: add: 0/0, grow: 0/-1 bytes: 0/-24 (-24) function old new delta board_init 520 496 -24 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | microblaze: Setup distro boot env variables at run timeT Karthik Reddy2020-10-272-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Setup all the distro boot related environment variables at run time. Add BOOT_SCRIPT_OFFSET config to microblaze board Kconfig. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | microblaze: board: Check return value whlie saving env variablesT Karthik Reddy2020-10-271-3/+7
| | | | | | | | | | | | | | | | | | | | | Check and print warning if run time env variables are not saved. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: Add missing support for 9cg versionMichal Simek2020-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | 9cg version was supported before code refactoring. The patch is adding it back. Fixes: fa793165daf7 ("xilinx: zynqmp: refactor silicon name function") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: Add Z-turn board V5Alexandre GRIVEAUX2020-10-271-0/+273
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding Z-turn board V5 to resolve the change between: "Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035 "Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031 At this time the S25FL128SAGNFI003 doesn't work because of bug: *** Warning - spi_flash_probe_bus_cs() failed, using default environment zynq-zturn was checked on V5 board, same error. Maybe Z-turn board have the same problem (board with W25Q128BVFIG). Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini2020-10-2910-4/+478
|\ \ \ | | | | | | | | | | | | | | | | | | | | - Bug fixes and updates on vid, ls1088a lx2160a and other layerscape platforms. - Add optee_rpmb support for LX2 & Kontron sl28 support
| * | | board/freescale/vid: enables writes to all commands for LTC3882Biwen Li2020-10-232-3/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable writes to all commands for LTC3882 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | | board: freescale: vid.c: Initialize variable 'i2caddress'Priyanka Singh2020-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize variable 'i2caddress' in print_vdd() to zero Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | | board: sl28: add board specific nvm commandMichael Walle2020-10-232-1/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board supports 16 configuration bits which can be manipulated with this command. See the board's README for a detailed explanation on each bit. Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | | board: kontron: add sl28 supportMichael Walle2020-10-237-0/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | | | eb_cpu5282: fix CONFIG_DM_VIDEO build warningsAnatolij Gustschin2020-10-261-4/+3
| |/ / |/| | | | | | | | | | | | | | | | | Remove CONFIG_VIDEO dependency to fix board removal warnings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Jens Scharsig <esw@bus-elektronik.de>
* | | Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungWIP/23Oct2020Tom Rini2020-10-231-1/+0
|\ \ \
| * | | samsung: common: remove the duplicated stdio print messageJaehoon Chung2020-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated stdio print message. It's already displayed in common/console.c. Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Odroid XU3/XU4/HC1/HC2 based on Exynos5422 Type: xu3 In: serial Out: serial Err: serial Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | | Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiWIP/22Oct2020Tom Rini2020-10-221-7/+40
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | - sun8i emac changes (Andre) - SCP firmware (Samuel)
| * | | sunxi: binman: Add support for including SCP firmwareSamuel Holland2020-10-221-7/+40
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* | | km: adapt defines and variables for new memory layoutHolger Brunck2020-10-221-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Remove old values from kmp204x.h] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | km: fix license string and compatible stringsHolger Brunck2020-10-224-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: dts: stm32: Do not set eth1addr if KS8851 has EEPROMMarek Vasut2020-10-211-4/+36
|/ / | | | | | | | | | | | | | | | | | | | | | | In case the KS8851 has external EEPROM attached to it, do not set eth1addr at all. The network stack will read the MAC out of the KS8851 and set eth1addr accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
* | arm64: dts: armada-3720-espressobin: use Linux model/compatible stringsAndre Heider2020-10-141-4/+4
| | | | | | | | | | | | | | | | Fix the actual board vendor and ease synching dts files from Linux. Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 ↵Luka Kovacic2020-10-141-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | networking Add support for the marvell,armada8040-puzzle-m801 compatible string in the board/Marvell/mvebu_armada-8k/board.c file to initialize the networking on iEi Puzzle-M801 board (2x CP1 1 Gb ports). Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: Initial iEi Puzzle-M801 supportLuka Kovacic2020-10-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial U-Boot support for the iEi Puzzle-M801 board based on the Marvell Armada 88F8040 SoC. Currently supported hardware: 1x USB 3.0 4x Gigabit Ethernet 2x SFP+ (with NXP PCA9555 and NXP PCA9544) 1x SATA 3.0 1x M.2 type B 1x RJ45 UART 1x SPI flash 1x EPSON RX8010 RTC Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
View Lorry Controller Status