summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* ARM: rmobile: Fix SD divider settings on Gen3Marek Vasut2017-09-072-8/+8
| | | | | | | | | | | On RCar M3 and on RCar H3 newer than and not including ES1.0, the SD clock must be divided by 4 rather than 2 because a hardware workaround present only in the H3 ES1.0 has been removed from these chips. U-Boot currently only supports M3 and H3 ES 2.0 and newer, so configure the SD pre-divider to 4 to prevent SD instability. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* armv8: ls1043/ls1046aqds: add support for RGMII_TXIDMadalin Bucur2017-09-072-0/+2
| | | | | | Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2017-09-052-0/+83
|\
| * rockchip: phycore: Read configuration EEPROM & set ethaddr in late initWadim Egorov2017-09-052-0/+83
| | | | | | | | | | | | | | | | Read SoM information from EEPROM and set ethaddr in late init. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2017-09-042-16/+6
|\ \ | |/ |/|
| * ARM: rmobile: Drop board_mmc_initMarek Vasut2017-09-052-14/+4
| | | | | | | | | | | | | | | | | | The board_mmc_init() is no longer invoked when DM is used, so move all the pinmux config into board_init() instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: rmobile: Replace CONFIG_RAVB with CONFIG_RENESAS_RAVB in boardsMarek Vasut2017-09-052-2/+2
| | | | | | | | | | | | | | | | | | | | The configuration option name is the later, so replace usage of CONFIG_RAVB in board files with CONFIG_RENESAS_RAVB , otherwise the RAVB pinmux is not set and ethernet does not work. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environmentDerald D. Woods2017-09-031-1/+19
| | | | | | | | | | | | | | | | - Pass MTDPARTS kernel arguments to kernel - Use Kconfig CONFIG_NAND instead of CONFIG_SYS_EXTRA_OPTIONS="NAND" - Call 'usb_stop' on kernel start - Update Falcon mode setup to match other OMAP3 boards - Use "uEnv.txt" as boot script instead of "boot.scr"
* | Merge git://git.denx.de/u-boot-sunxiTom Rini2017-09-011-1/+1
|\ \
| * | sunxi: Fix CONFIG_SUNXI_GMAC referencesDave Prue2017-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SUNXI_GMAC was still used to configure the code where as the same has been renamed and moved to Kconfig in below commit "sunxi: Move SUNXI_GMAC to Kconfig" (sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb) Signed-off-by: Dave Prue <dave@prue.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org> [Tweek commit message, config_whitelist.txt, build-whitelist.sh] Signed-off-by: Jagan Teki <jagan@openedev.com>
* | | Merge git://git.denx.de/u-boot-imxTom Rini2017-09-0118-233/+97
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/imx6qdl_icore_mmc_defconfig configs/imx6qdl_icore_rqs_defconfig
| * | i.MX6Q: icorem6: Add falcon modeJagan Teki2017-08-301-0/+11
| | | | | | | | | | | | | | | | | | Add Falcon mode support in Engicam i.CoreM6 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | pfla02: Fix RAM detection and support 1 bank SOMStefano Babic2017-08-292-33/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of 2 banks, the address space of the first CS must be defined and not let to the higher value. Add support for SOM with a single bank of RAM. It was tested with i.MX6Q modules in the following configurations: - 2 Banks, 4 GB - 2 Banks, 1 GB - 1 Bank, 1 GB Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | imx: imx6: Move gpr_init() function to soc.cBreno Lima2017-08-2817-200/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | apalis/colibri_imx6: use independent USB PID for SPLStefan Agner2017-08-232-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a completely independent USB Product ID for SPL. This allows to differentiate a SDP running in SPL and SDP running in a U-Boot which could not read the config block successfully. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Łukasz Majewski <lukma@denx.de>
* | | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2017-08-262-72/+2
|\ \ \ | | |/ | |/|
| * | ARM: rmobile: Remove SH SDHI probing from ULCB boardMarek Vasut2017-08-261-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | Drop the SH SDHI bit from the board since SD now probes from DT instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove SH SDHI probing from Salvator-X boardMarek Vasut2017-08-261-15/+1
| | | | | | | | | | | | | | | | | | | | | | | | Drop the SH SDHI bit from the board since SD now probes from DT instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove Serial SH probing from ULCB boardMarek Vasut2017-08-261-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | Drop the Serial SH bit from the board since UART now probes from DT instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove Serial SH probing from Salvator-X boardMarek Vasut2017-08-261-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | Drop the Serial SH bit from the board since UART now probes from DT instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove RAVB probing from ULCB boardMarek Vasut2017-08-261-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | Drop the RAVB bit from the board since RAVB now probes from DT instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove RAVB probing from Salvator-X boardMarek Vasut2017-08-261-11/+0
| |/ | | | | | | | | | | | | | | Drop the RAVB bit from the board since RAVB now probes from DT instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge git://git.denx.de/u-boot-x86Tom Rini2017-08-262-0/+2
|\ \
| * | x86: dfi-bt700: Select SERIAL_RX_BUFFER via KconfigStefan Roese2017-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support more input characters (longer stings pasted into the U-Boot prompt) without dropping, lets selects the recently added UART RX buffer for these boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | x86: conga-qeval20-qa3-e3845: Select SERIAL_RX_BUFFER via KconfigStefan Roese2017-08-241-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | To support more input characters (longer stings pasted into the U-Boot prompt) without dropping, lets selects the recently added UART RX buffer for these boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | igep00x0: merge igep0020 and igep0030 defconfigs to igep00x0_defconfigPau Pajuelo2017-08-264-29/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update igep00x0 code with the following features: - Add board and revision detection for the boards: - IGEP0020-RF - IGEP0020-RC - IGEP0030-RG - IGEP0030-RE - Merge IGEP0020 and IGEP0030 mux tables - Add suport to use GPIO_126, GPIO_127 and GPIO_129 - board_name and board_rev environment variables display board and revision informations - Move dtb name selection from code to boot script Signed-off-by: Pau Pajuelo <ppajuel@gmail.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
* | igep00x0: move SPL routines into separate fileLadislav Michl2017-08-264-129/+149
| | | | | | | | | | | | | | | | | | Avoid cluttering board file with CONFIG_SPL_BUILD ifdefs by moving SPL related functions into separate file. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* | board/spear/common: move code to arch/arm/cpu/arm926ejs/spear/Thomas Petazzoni2017-08-263-437/+0
|/ | | | | | | | | | | | | The code in board/spear/common/ is not board-specific but SoC-specific. Therefore, boards from other vendors than "spear" may want to re-use this code, which is currently difficult with the code being placed in board/spear/common/. Since this code really is SoC-specific, this commit moves it to arch/arm/cpu/arm926ejs/spear/, with the rest of the SPEAr related code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* ARM: mvebu: set correct mem_size for db-88f6820-amcChris Packham2017-08-211-1/+1
| | | | | | | | | | The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB DRAM. Update the board_topology_map to reflect the correct configuration. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* ARM: hisilicon: hikey: Fix eMMC with latest ATF & U-BootPeter Griffin2017-08-201-2/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ATF can leave the MMC IP in a state where U-Boot mmc driver can't enumerate the eMMC. This patch provides a mmc0_reset_clk() function like we already so do sd card controller which resets the IP when entering U-Boot. With this patch applied eMMC partitions are successfully enumerated again. => mmc dev 0 switch to partitions #0, OK mmc0(part 0) is current device => mmc part Partition Map for MMC device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000800 0x00000fff "vrl" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 496847ab-56a1-4cd5-a1ad-47f4acf055c9 2 0x00001000 0x000017ff "vrl_backup" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 61a36fc1-8efb-4899-84d8-b61642efa723 3 0x00001800 0x00001fff "mcuimage" <snip> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2017-08-181-0/+80
|\
| * dm: imx: cm_fx6: Add MMC support for CONFIG_BLKSimon Glass2017-08-171-0/+11
| | | | | | | | | | | | | | | | When CONFIG_BLK is enabled our weak board_mmc_init() will not be called. Since there is no clock driver for MX6 yet, we must manually enable the clocks. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: imx: cm_fx6: Support driver model for SATASimon Glass2017-08-171-0/+69
| | | | | | | | | | | | | | Add support for using driver model for SATA with the cm_fx6 board. The old code remains for now to permit testing. Signed-off-by: Simon Glass <sjg@chromium.org>
* | m68k: add board stmark2, mcf5441x basedAngelo Dureghello2017-08-185-0/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sysam stmark2 board is a generic and fully (hw and sw) open board, with a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card as non volatile memories, and a wifi module included on-board. The board is actually used mainly for Coldfire custodian testing activity related to the mcf5441x Coldfire family. For further information please see: http://sysam.it/cff_stmark2.html Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes in v2: - remove CMD_REGINFO - add board information in commit message
* | m68k: mcf5445x: move early ddr init as board-specificAngelo Dureghello2017-08-186-0/+288
| | | | | | | | | | | | | | | | For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init is required. This patch moves this ddr/sdram early initalization away from start.S (to be board related). Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* | Merge git://git.denx.de/u-boot-tegraTom Rini2017-08-161-2/+2
|\ \
| * | apalis_t30: fix usb otg power enableMarcel Ziswiler2017-08-151-2/+2
| |/ | | | | | | | | | | | | | | | | Fix USB OTG power enable aka USBO1_EN which on Apalis T30 is connected to the T30 ball GEN2_I2C_SCL. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge git://git.denx.de/u-boot-sunxiTom Rini2017-08-161-0/+15
|\ \ | | | | | | | | | | | | | | | Update A20-OLinuXino-Lime2-eMMC_defconfig to include CONFIG_SCSI Signed-off-by: Tom Rini <trini@konsulko.com>
| * | sun50i: a64: Add A64-OLinuXino initial supportJagan Teki2017-08-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. OLimex A64-OLinuXino has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 4/8/16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | sun50i: a64: Add initial NanoPi A64 supportJagan Teki2017-08-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner A64 SOC. Nanopi A64 features - Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS - 1GB DDR3 RAM - MicroSD - Gigabit Ethernet (RTL8211E) - Wi-Fi 802.11b/g/n - IR receiver - Audio In/Out - Video In/Out - Serial Debug Port - microUSB 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
| * | sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMCOlliver Schinagl2017-08-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/ It is a assembly variant of the regular Lime2 but featuring eMMC for storage. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | | Merge git://www.denx.de/git/u-boot-imxTom Rini2017-08-167-4/+753
|\ \ \ | | | | | | | | | | | | | | | | | | | | Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | mx6sabreauto: Fix IOMUXC_GPR6 and IOMUXC_GPR7 valuesBreno Lima2017-08-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IPU AXI QoS for the i.MX6QP and i.MX6DP processors have to be set as commented in the code: /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ Set IOMUXC_GPR6 and IOMUXC_GPR7 to 0x77177717 instead of 0x007F007F. Signed-off-by: Breno Lima <breno.lima@nxp.com>
| * | | mx6sabresd: Fix IOMUXC_GPR6 and IOMUXC_GPR7 valuesBreno Lima2017-08-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IPU AXI QoS for the i.MX6QP and i.MX6DP processors have to be set as commented in the code: /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ Set IOMUXC_GPR6 and IOMUXC_GPR7 to 0x77177717 instead of 0x007F007F. Signed-off-by: Breno Lima <breno.lima@nxp.com>
| * | | mx6: Add support for Phytec pfla02 (NAND)Stefano Babic2017-08-025-0/+749
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Phytec pfla02, equipped with NAND. CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 31C Reset cause: POR I2C: ready DRAM: 1 GiB NAND: 2048 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected n25q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Stefan Christ <s.christ@phytec.de> CC: Stefan Müller-Klieser <S.Mueller-Klieser@phytec.de> CC: Christian Hemp <C.Hemp@phytec.de>
* | | | env: Rename some other getenv()-related functionsSimon Glass2017-08-1625-50/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these other functions as well, for consistency: getenv_vlan() getenv_bootm_size() getenv_bootm_low() getenv_bootm_mapsize() env_get_default() Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()Simon Glass2017-08-1628-32/+32
| | | | | | | | | | | | | | | | | | | | | | | | Rename this function for consistency with env_get(). Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()Simon Glass2017-08-169-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | env: Rename getenv/_f() to env_get()Simon Glass2017-08-1688-183/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()Simon Glass2017-08-1646-64/+64
| | | | | | | | | | | | | | | | | | | | | | | | Rename this function for consistency with env_set(). Signed-off-by: Simon Glass <sjg@chromium.org>
View Lorry Controller Status