summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* rockchip: rk3399: Add ROC-RK3399-PC supportLevin Du2019-08-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellWIP/12Aug2019Tom Rini2019-08-129-112/+132
|\ | | | | | | | | | | | | | | | | - Various improvements to Keymile boards - mostly DT conversation (Pascal & Holger) - Removal of now unsupported Keymile boards (Pascal & Holger) - Small MVEBU PCI fix (Marek) - Turris Omnia defconfig update (Marek) - Misc Allied Telesis defconfig updates (Chris)
| * powerpc/km: remove unmaintained board KMLION1Holger Brunck2019-08-121-1/+0
| | | | | | | | | | | | | | | | | | This board is unmaintained and can be removed. This also allows us to remove kmp204x-common.h and integrate it in kmp204x.h. Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * powerpc/km: remove unmaintained target KMVECT1Holger Brunck2019-08-124-106/+0
| | | | | | | | | | | | Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km/arm: remove unmaintained target PORTL2Pascal Linder2019-08-121-1/+0
| | | | | | | | | | | | | | | | | | Remove the PORTL2 board and all its dependencies as it is no longer supported by the company. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km/rgmii: port Ethernet interface of KM Kirkwood boards to driver modelPascal Linder2019-08-121-0/+1
| | | | | | | | | | | | | | | | | | | | Activate the driver model for the Ethernet interface (RGMII) in the KM Kirkwood Kconfig file. Additionally, raise the auto negotiation timeout to eight seconds as more time is required for those boards. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km/uart: port UART interface of KM Kirkwood boards to driver modelPascal Linder2019-08-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | Activate the driver model for the serial interface in the KM Kirkwood Kconfig file. The associated preprocessor definitions could be removed from the header file. However, the clock of 200 MHz needs to be declared in the device tree. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km: remove obsolete definitions in KM header filesPascal Linder2019-08-121-4/+0
| | | | | | | | | | | | | | | | | | | | After moving the KM specific configurations to Kconfig, the associated preprocessor definitions can now be removed in the headers. Moreover, the whitelist has been adapted correspondingly. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * km: add Kconfig menus for KM boardsPascal Linder2019-08-122-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To execute the conversion away from board specific header files, Kconfig menus have been implemented for all KM boards and additionally for those having an ARM architecture. For the moment, the preprocessor definitions stay in the headers. The boolean types, however, needed a modification (#define CONFIG_* 1). The default configuration files of some boards required an update in order to not change the currently defined values of the configurations. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge tag 'u-boot-amlogic-20190812' of ↵Tom Rini2019-08-124-0/+162
|\ \ | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - amlogic: add support for the SEI Robotic SEI510
| * | boards: meson: add g12a sei510Jerome Brunet2019-08-124-0/+162
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SEI510 board is based on the Amlogic S905X2 SoC from the Amlogic G12A SoC family. The board has the following specifications : - Amlogic S905X2 ARM Cortex-A53 quad-core SoC - XGB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - eMMC - SDcard - Infrared receiver - SDIO WiFi Module The board default behaviour is for booting Android and triggers fastboot on recovery or reboot mode. USB vendor ID (used by fastboot) is 0x18d1 (Google) for default udev rules for existing android users work out of the box. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | Merge branch '2019-08-11-ti-imports'Tom Rini2019-08-1211-32/+636
|\ \ | | | | | | | | | | | | | | | | | | - More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
| * | ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NORAdam Ford2019-08-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Historically there have been various boot options, SPI flash, NAND or NOR. The NOR flash is mutually exclusive with MMC, but it isn't mutually exclusive with NAND or SPI Flash, so this patch enables both NAND flash and SPI Flash when booting from NOR. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | board/BuR/brsmarc1: initial commitHannes Schmelzer2019-08-126-0/+498
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the B&R brsmarc1 SoM. The SoM is based on TI's AM335x SoC. Mainly vxWorks 6.9.4.x is running on the board, doing some PLC stuff on various carrier boards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
| * | ARM: omap3: overo: Fix MMC init for SPLAnselm Busse2019-08-122-14/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL for the Overo board does not initialise the MMC. Hence, it cannot load the main boot loader from the SD card susequently. This patch moves the initialisation code for the MMC so it gets included in the SPL. [trini: Add missing header] Signed-off-by: Tom Rini <trini@konsulko.com>
| * | board: siemens: extend factoryset reading for giedi and deneb boardsAnatolij Gustschin2019-08-112-15/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | giedi and deneb are i.MX8X based and have additional data with WLAN MAC in factoryset container. Enable building for these boards and adapt factoryset functions to set WLAN MAC and dtb name in environment. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | board: siemens: adapt factoryset reading for DM_I2C enabled boardsAnatolij Gustschin2019-08-111-2/+43
| |/ | | | | | | | | | | | | For new boards we always enable DM_I2C. Extend factoryset functions to support EEPROM reading on these boards. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | env: Rename environment.h to env_internal.hSimon Glass2019-08-1141-41/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* | env: Drop environment.h header file where not neededSimon Glass2019-08-1174-74/+0
| | | | | | | | | | | | | | | | This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Move get/set_default_env() to env.hSimon Glass2019-08-111-1/+1
| | | | | | | | | | | | | | | | Move these functions to the new header file and rename set_default_env() to env_set_default() so that it has a consistent env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Move env_get() to env.hSimon Glass2019-08-1159-0/+59
| | | | | | | | | | | | | | Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Move env_set() to env.hSimon Glass2019-08-11124-0/+124
| | | | | | | | | | | | | | Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Move env_get_yesno() to env.hSimon Glass2019-08-111-0/+1
| | | | | | | | | | | | | | Move env_get_yesno() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | env: Move env_get_ulong() to env.hSimon Glass2019-08-115-0/+5
| | | | | | | | | | | | | | Move env_get_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | env: Move env_set_ulong() to env.hSimon Glass2019-08-119-0/+9
| | | | | | | | | | | | | | Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | env: Move env_set_hex() to env.hSimon Glass2019-08-118-0/+8
| | | | | | | | | | | | | | | | Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | env: Move env_init() to env.hSimon Glass2019-08-1112-0/+12
| | | | | | | | | | | | | | Move env_init() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | env: Move env_get_f() to env.hSimon Glass2019-08-118-0/+8
| | | | | | | | | | | | | | Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | common: Move gzip functions into a new gzip headerSimon Glass2019-08-111-0/+1
| | | | | | | | | | | | | | | | | | As part of the effort to remove things from common.h, create a new header for the gzip functions. Move the function declarations to it and add missing documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | board: hisilicon: Add support for Hikey960 boardManivannan Sadhasivam2019-08-115-0/+457
|/ | | | | | | | | | | | | | | | | This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC. More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/ The initial supported/tested devices include: - Debug serial - SD With these support, it's good enough for loading Linux Kernel from SD. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-shWIP/10Aug2019Tom Rini2019-08-104-0/+89
|\ | | | | | | - R8A77980 V3H support
| * ARM: renesas: Add R8A77980 V3H Condor board codeMarek Vasut2019-08-094-0/+89
| | | | | | | | | | | | | | Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86WIP/09Aug2019Tom Rini2019-08-097-0/+93
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | - Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
| * | board: intel: Add new slimbootloader boardPark, Aiden2019-08-096-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
| * | x86: edison: Enable SD slotAndy Shevchenko2019-08-091-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SD slot on Intel Edison platform. By default firmware doesn't put device on active state. Thus, we have to do this explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | apalis-tk1: support v1.2 hardware revisionMarcel Ziswiler2019-08-092-10/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is loaded on V1.2 and later modules and resp. USB power enable signals activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | apalis-tk1: remove non-essential power rails on bootDominik Sliwa2019-08-091-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When mainline kernels reboot TK1 they use SW_RESET, that reset mode does not reset PMIC. Some rails need to be off for RAM Re-repair to work correctly. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | apalis-tk1: set apalis gpio 8 aka fan_enIgor Opaniuk2019-08-091-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1 modules. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | apalis-tk1: do not explicitly release reset_moci#Marcel Ziswiler2019-08-091-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By keeping RESET_MOCI_CTRL low we avoid explicitly releasing RESET_MOCI#. Please note that module hardware versions up to V1.1A will already release RESET_MOCI# in hardware coming out of reset. Please further note that with this change the USB hub on the Apalis Evaluation board is kept in reset in U-Boot and therefore none of its ports are operational in U-Boot. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini2019-08-091-0/+18
|\ \ | |/ |/| | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
| * arm64: dts: rockchip: Add support for Khadas Edge-CaptainNick Xie2019-08-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add devicetree support for Khadas Edge-Captain. Khadas Captain is the carrier board for Khadas Edge. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| * arm64: dts: rockchip: Add support for Khadas Edge-VNick Xie2019-08-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add devicetree support for Khadas Edge-V. Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| * arm64: dts: rockchip: Add support for Khadas EdgeNick Xie2019-08-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | Merge tag 'u-boot-amlogic-20190731' of ↵WIP/31Jul2019Tom Rini2019-07-315-0/+290
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
| * | board: amlogic: add support for Odroid-N2Neil Armstrong2019-07-315-0/+290
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
* | Revert "ARM: davinci: da850: Manual pinmux only when PINCTRL not available"Adam Ford2019-07-311-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 877ab2423bc257045a06bc23d4b9440b82bda6fb. The above patch was designed to shrink code by only pin-muxing items needed for SPL in SPL and relying on driver model or SPL to mux other items. Unfortunately, da850evm_direct_nor doesn't use SPL so items that were only muxed during SPL are not muxed causing the board to no longer boot. Signed-off-by: Adam Ford <aford173@gmail.com>
* | ARM: da850-evm: Remove references to CONFIG_DA850_AM18X_EVMAdam Ford2019-07-311-3/+0
| | | | | | | | | | | | | | | | With the removal of da850_am18xxevm, there is at least one whitelisted CONFIG option that can be deleted. This patch removes CONFIG_DA850_AM18X_EVM since it's not required any more Signed-off-by: Adam Ford <aford173@gmail.com>
* | Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini2019-07-308-3/+995
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
| * | arm64: zynqmp: Do not include pm_cfg_obj.o when SPL is disabledMichal Simek2019-07-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xilinx_zynqmp_mini configuration is throwing build error: readlink: missing operand Try 'readlink --help' for more information. because CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE is not defined at all and Makefile pass ifneq condition. Add SPL_BUILD dependency which is also reflected in Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: add MAINTAINERS entry for Avnet UltraZed-EVLuca Ceresoli2019-07-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board was added without adding a MAINTAINERS entry. Fixes: $ ./tools/genboardscfg.py -f WARNING: no status info for 'avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0' WARNING: no maintainers for 'avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0' $ Reported-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
View Lorry Controller Status