summaryrefslogtreecommitdiff
path: root/board/rockchip
Commit message (Collapse)AuthorAgeFilesLines
* WS cleanup: remove trailing empty linesWolfgang Denk2021-09-303-3/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* board: rockchip: Add rk3568 evb supportJoseph Chen2021-06-184-0/+32
| | | | | | | Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* board: dts: rockchip: Add NanoPi M4BAlexandre Vicenzi2021-03-301-0/+6
| | | | | | | | | | | | Add initial support for NanoPi M4B, a minor revision of the original NanoPi M4. Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4: "arm64: dts: rockchip: Add NanoPi M4B board" (sha1: c7b03115003f7f337ab165542cee37148cf30a8a) Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com> Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
* arm64: rk3399: Add support NanoPi R4sXiaobo Tian2021-03-301-0/+6
| | | | | | | | | | | | | | NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support, including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port. port.It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1]. [1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6 Signed-off-by: xiaobo <peterwillcn@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* common: Drop asm/global_data.h from common headerWIP/2021-02-02-drop-asm_global_data-when-unusedSimon Glass2021-02-022-0/+2
| | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* rockchip: rk3328: Add support for FriendlyARM NanoPi R2SDavid Bauer2021-01-211-0/+7
| | | | | | | | | | | | | | | | This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
* rockchip: rv1108: use correct API for board callbackKever Yang2020-09-161-1/+1
| | | | | | | | | | | | Use board_early_init_f() instead of mach_cpu_init() for board, the board_early_init_f() is used for board init and after dm_initf, while the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able to use syscon API). Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base") Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* arm64: dts: rockchip: Add Radxa ROCK Pi 4C supportJagan Teki2020-07-221-0/+2
| | | | | | | | | | | Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki2020-07-071-0/+6
| | | | | | | | | | | | | | | Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* arm64: dts: rockchip: Add Radxa Rock Pi N10 initial supportJagan Teki2020-07-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has - VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC. So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files. rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1. Tested - ROCK PI N10 Model B - ROCK PI N10 Model C - Boot from SD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3328: add rock-pi-e-rk3328_defconfig fileb.l.huang2020-06-071-0/+7
| | | | | | | This commit add the default configuration file and relevant description for rock-pi-e board Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
* rockchip: Remove ARCH= references from documentationTom Rini2020-06-022-2/+0
| | | | | | | | | | | | | When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Acked-by: Kever Yang <kever.yang@rock-chips.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* common: Drop log.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* command: Remove the cmd_tbl_t typedefSimon Glass2020-05-181-0/+1
| | | | | | | | | | | | | We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop init.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop net.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | | | | | | Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rk3399: Add Nanopi M4 2GB board supportDeepak Das2020-05-011-0/+7
| | | | | | | | | commit b2f5da9dd068 ("rockchip: rk3399: Add Nanopi M4 board support") added support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM. This patch adds another variant of NanoPi M4 board with Dual-Channel 2GB DDR3-1866 RAM. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
* rockchip: rk3328: Add support for ROC-RK3328-CC boardChen-Yu Tsai2020-05-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit card size development board based on the Rockchip RK3328 SoC, with: - 1/2/4 GB DDR4 DRAM - eMMC connector for optional module - micro SD card slot - 1 x USB 3.0 host port - 2 x USB 2.0 host port - 1 x USB 2.0 OTG port - HDMI video output - TRRS connector with audio and composite video output - gigabit Ethernet - consumer IR receiver - debug UART pins The ROC-RK3328-CC has the enable pin of the SD card power switch tied to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is muxed by default. SDMMC0_PWREN is an active high signal controlled by the MMC controller, however the switch enable is active low, and pulled low (enabled) by default to make things work on boot. As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable power to the card. The default GPIO state for the pin is pull-down and input, which doesn't require extra configuration when paired with the external pull-down and active low switch. Deal with this by enabling regulator support in SPL, and setting "u-boot,dm-spl" for the regulator and other device nodes needed for muxing the pin. The device tree file is synced from the Linux kernel next-20200324. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: evb-rv1108: Use syscon API to get grf baseKever Yang2020-03-261-4/+3
| | | | | | | Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh2020-02-191-6/+0
| | | | | | | | | | roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: config: add support for firefly-px30 boardKever Yang2019-12-061-0/+1
| | | | | | | | | This is a core board named Core-PX30-JD4 with a mainboard from Firefly, name it as firefly-px30 for now. This board can re-use the dts of PX30, the only difference is the UART IO, the firefly use UART2 M1 while evb use UART2 M0. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* cosmetic: Fix spelling and whitespace errorsThomas Hebb2019-12-031-1/+1
| | | | Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
* common: Move old EEPROM functions into a new headerWIP/2019-12-02-master-importsSimon Glass2019-12-021-0/+1
| | | | | | | | These functions do not use driver model but are still used. Move them to a new eeprom.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: Move some board functions out of common.hSimon Glass2019-12-022-0/+2
| | | | | | | A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* rockchip: dts: tinker: Add tinker-s board supportMichael Trimarchi2019-11-172-0/+19
| | | | | | | | | | | Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* board: rockchip: Add rk3308 evb supportAndy Yan2019-11-174-0/+72
| | | | | | | Add support for rk3308 evaluation board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: split rockpro64 out of evb_rk3399Vasily Khoruzhick2019-11-171-7/+0
| | | | | | | | | rockpro64 needs to setup I/O domains in order for USB to work in u-boot. Since we currently don't have a driver to do that, split it into its own board file and initialize I/O domains here. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfigJagan Teki2019-11-171-1/+1
| | | | | | | | | | | | | | | roc-rk3399-pc_defconfig is committed in below commit <8a681f4c5aa15db51ad0209734859c9fe7c29cfd> ("rockchip: rk3399: Add ROC-RK3399-PC support") which doesn't follow the existing defconfigs on rk3399. So, rename as followed with other rk3399 defconfigs. Cc: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: add px30-evb boardHeiko Stuebner2019-11-174-0/+32
| | | | | | | | The px30 evb is an evaluation board for the px30 together with a dsi- connected display. This adds board and config files for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: Add Leez P710 supportAndy Yan2019-11-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Specification - Rockchip RK3399 - LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - TYPE-C Power supply Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1: "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC" (sha1: fc702ed49a8668a17343811ee28214d845bfc5e6) Signed-off-by: Andy Yan <andyshrk@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3288: remove fennec board supportKever Yang2019-08-234-33/+0
| | | | | | Since there is no one using this board, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: Add ROC-RK3399-PC supportLevin Du2019-08-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* env: Drop environment.h header file where not neededSimon Glass2019-08-111-1/+0
| | | | | | | | This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Move env_set() to env.hSimon Glass2019-08-111-0/+1
| | | | | | | Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* arm64: dts: rockchip: Add support for Khadas Edge-CaptainNick Xie2019-08-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add devicetree support for Khadas Edge-Captain. Khadas Captain is the carrier board for Khadas Edge. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* arm64: dts: rockchip: Add support for Khadas Edge-VNick Xie2019-08-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add devicetree support for Khadas Edge-V. Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* arm64: dts: rockchip: Add support for Khadas EdgeNick Xie2019-08-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rv1108: Migrate to use common board fileKever Yang2019-07-291-6/+0
| | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: Migrate to use common board fileKever Yang2019-07-291-13/+0
| | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: init vbus regulator in board_early_init_f()Kever Yang2019-07-291-9/+17
| | | | | | | Handle per-board init in board_early_init_f() and use the common board_init() for per-platform board init later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3368: Migrate to use common board fileKever Yang2019-07-292-21/+0
| | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3328: Migrate to use common board fileKever Yang2019-07-291-64/+0
| | | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
* rockchip: rk3288: Move rk3288_detect_reset_reason to soc fileKever Yang2019-07-291-1/+1
| | | | | | | | | The rk3288_detect_reset_reason() is per-SoC operation, move it to rk3288.c, and extend the rk_board_late_init() with rk3288_board_late_init() to make all the board works fine as before. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: sdram_common: add common dram_init_banksizeKever Yang2019-07-291-8/+0
| | | | | | | dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: clean up board_usb_init() for all SoCsKever Yang2019-07-291-6/+5
| | | | | | | Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: Remove obsolete references to pyelftoolsChris Webb2019-07-201-6/+0
| | | | | | | | | make_fit_atf.py no longer requires pyelftools, and nothing else in the rockchip build requires it either, so remove references to installing it from the documentation. Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
* rockchip: board: rk3288: remove board_boot_order()Kever Yang2019-07-202-18/+0
| | | | | | | Prefer to use dts config instead, remove all board_boot_order() for rk3288 boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: Fix enabling boot-on regulatorsMark Kettenis2019-06-261-31/+1
| | | | | | | | | | | | The new common rockchip pinctrl driver does not support explicit requests for a particular pinctrl function. As a result, the board_init() function bails out early before enabling the boot-on regulators. Fix this by simply removing the request for pwm0, pwm2 and pwm3. The generic DM code already does the necessary configuration if necessary. Reported-by: Levin Du <djw@t-chip.com.cn> Signed-of-by: Mark Kettenis <kettenis@openbsd.org>
* rockchip: rk3399: Support common spl_board_initJagan Teki2019-06-261-8/+0
| | | | | | | | | | | | Support common spl_board_init by moving code from puma board file into, common rk3399-board-spl.c. Part of the code has sysreset-gpio, regulators_enable_boot_on but right now only puma board is using this with relevant config options rest remains common for all targets. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* board: rk3399: Drop explicit uart enablement in spl_board_initJagan Teki2019-06-261-22/+1
| | | | | | | | | | | | | | | | | | | preloader_console_init is used for printing SPL boot banner that usually called from spl_board_init. The current spl_board_init in evb and rock960 is enabling explicit pinctrl, debug uart prior to calling preloader_console_init which eventually not required since board_init_f is already enabled debug uart. So, drop those explicit enablement calls from spl_board_init of evb, rock960. Tested this by enabling CONFIG_SPL_BOARD_INIT and adding u-boot,dm-pre-reloc property for uart node. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
View Lorry Controller Status