summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2Jagan Teki2019-04-1733-836/+369
| | | | | | | | | | | | | | | | | | | | | | | | | Sync sun7i-a20 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun7i-a20* sync: "ARM: dts: sun7i: bananapi: Add GPIO banks regulators" (sha1: 09c6572290f018d73ec2e812e28bada34d41815f) Here are U-Boot specific dts changes. - s/uart0_pins_a/uart0_pb_pins for sun7i-a20-ainol-aw1.dts sun7i-a20-m5.dts sun7i-a20-primo73.dts sun7i-a20-yones-toptech-bd1078.dts sunxi-itead-core-common.dtsi - s/gmac_pins_mii_a/gmac_rgmii_pins for sun7i-a20-m5.dts - drop i2c0, i2c1 pins from sunxi-itead-core-common.dtsi - drop mmc0 pins from sun7i-a20-primo73.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2Jagan Teki2019-04-173-8/+449
| | | | | | | | | | | | | | | Sync sun8i-r40 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun8i-r40* sync: "ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node" (sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef) Linux commit details about the sun8i-v40* sync: "ARM: dts: sunxi: Fix I2C bus warnings" (sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19) Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm64: allwinner: sun50i: Sync H6 dts(i) files from LinuxJagan Teki2019-04-143-21/+527
| | | | | | | | | | | | | | | | | | | | | Usually the Linux dts changes were synced in specific tags in Allwinner, to keep track for whats been synced so-far and plan for future syncs. But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific tag since these dts(i) changes are required for new H6 boards support. Linux commit details about the sun50i-h6* sync: "arm64: dts: allwinner: h6: move MMC pinctrl to dtsi" (sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8) Linux commit details about the sun8i-tcon-top.h sync: "dt-bindings: display: sunxi-drm: Add TCON TOP description" (sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8) Part of the sync initiated by 'Clément Péron'. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2019-04-14127-158/+158
|\ | | | | | | | | | | | | | | | | Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
| * x86: dts: switch spi-flash to jedec, spi-nor compatibleNeil Armstrong2019-04-1212-12/+12
| | | | | | | | | | | | | | | | | | | | The x86 code and DT uses "spi-flash" to detect a flash node, switch to "jedec,spi-nor" in the DTS files and in fdtdec by switching the GENERIC_SPI_FLASH value to to jedec,spi-nor. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * dts: switch spi-flash to jedec, spi-nor compatibleNeil Armstrong2019-04-12116-147/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot dts files. This compatible has been added in sf_probe, let use it. This patch switches to jedec,spi-nor when spi-flash is used in the DTS and DTSI files, and removed spi-flash when jedec,spi-nor is already present. The x86 dts are switched in a separate commit since it depends on a change in fdtdec. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dmTom Rini2019-04-134-10/+11
|\ \ | | | | | | | | | | | | | | | fdtdec tests and improvements for carve-outs pinctrl race-condition fix various other fixes in sandbox, sound, mkimage, etc.
| * | dm: sound: make all functions static inlineChristian Gmeiner2019-04-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes following compile problem: ➜ u-boot-mainline git:(master) ✗ make sandbox_defconfig all NO_SDL=1 scripts/kconfig/conf --syncconfig Kconfig CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release CHK include/generated/version_autogenerated.h CHK include/generated/timestamp_autogenerated.h UPD include/generated/timestamp_autogenerated.h CHK include/generated/generic-asm-offsets.h HOSTCC tools/mkenvimage.o HOSTLD tools/mkenvimage HOSTCC tools/fit_image.o HOSTCC tools/image-host.o HOSTCC tools/dumpimage.o HOSTLD tools/dumpimage HOSTCC tools/mkimage.o HOSTLD tools/mkimage HOSTLD tools/fit_info HOSTLD tools/fit_check_sign CC cmd/version.o GZIP cmd/config_data.gz CHK cmd/config_data_gz.h CHK cmd/config_data_size.h CHK cmd/license_data_gz.h CHK cmd/license_data_size.h LD cmd/built-in.o CC common/main.o LD common/built-in.o CC drivers/fastboot/fb_getvar.o LD drivers/fastboot/built-in.o LD drivers/video/built-in.o ld.bfd: drivers/video/sandbox_sdl.o: in function `sandbox_sdl_sound_play': /home/christian/projects/u-boot-mainline/./arch/sandbox/include/asm/sdl.h:110: multiple definition of `sandbox_sdl_sound_play'; drivers/video/video-uclass.o:/home/christian/projects/u-boot-mainline/./arch/sandbox/include/asm/sdl.h:110: first defined here ld.bfd: drivers/video/sandbox_sdl.o: in function `sandbox_sdl_sound_init': /home/christian/projects/u-boot-mainline/./arch/sandbox/include/asm/sdl.h:120: multiple definition of `sandbox_sdl_sound_init'; drivers/video/video-uclass.o:/home/christian/projects/u-boot-mainline/./arch/sandbox/include/asm/sdl.h:120: first defined here make[3]: *** [scripts/Makefile.build:355: drivers/video/built-in.o] Fehler 1 make[2]: *** [scripts/Makefile.build:432: drivers/video] Fehler 2 make[1]: *** [Makefile:1531: drivers] Fehler 2 make: *** [Makefile:485: __build_one_by_one] Fehler 2 Fixes: f2b25c9bf82 ("dm: sound: Complete migration to driver model") Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * | sandbox: Properly print physical addressesThierry Reding2019-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use the %pap printf specifier to print physical addresses. The physical address is passed by reference and hence avoids the need to play tricks with the preprocessor to use the correct specifier. Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | sandbox: Use correct phys_{addr, size}_t for PHYS_64BIT=yThierry Reding2019-04-111-6/+6
| | | | | | | | | | | | | | | | | | | | | If 64-bit physical addresses support is enabled, make sure the sandox defines the correct types for phys_addr_t and phys_size_t. Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | syscon: update syscon_regmap_lookup_by_phandlePatrick Delaunay2019-04-111-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the function syscon_regmap_lookup_by_phandle() introduced by commit 6c3af1f24e4b ("syscon: dm: Add a new method to get a regmap from DTS") to have Linux-compatible syscon API. Same modification than commit e151a1c288bd ("syscon: add Linux-compatible syscon API") solves issue when the node identified by the phandle has several compatibles and is already bound to a dedicated driver. See Linux commit bdb0066df96e ("mfd: syscon: Decouple syscon interface from platform devices"). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mipsTom Rini2019-04-1332-25/+2441
|\ \ | | | | | | | | | | | | | | | | | | | | | - mt76xx: add USB support, small fixes - ath79: small fixes, add support for QCA9563 SoC and AP152 reference board - mscc: small fixes, add network support for JR2 and ServalT SoCs - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs - MIPS: fix redundant relocation of initrd images
| * | net: mscc: servalt: Add ethernet nodes for ServalTHoratiu Vultur2019-04-122-0/+65
| | | | | | | | | | | | | | | | | | | | | Add ethernet nodes for ServalT SoCs family. Currently there is only one pcb(pcb116) in this family. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
| * | net: Add MSCC ServalT network driver.Horatiu Vultur2019-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add network driver for Microsemi Ethernet switch. It is present on ServalT SoCs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | net: mscc: jaguar2: Add ethenet nodes for Jaguar2.Horatiu Vultur2019-04-124-0/+636
| | | | | | | | | | | | | | | | | | | | | Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this family: pcb110, pcb111 and pcb112. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
| * | dt: bcm963158: enable gpio controllerPhilippe Reynes2019-04-121-0/+32
| | | | | | | | | | | | | | | | | | | | | Enable all the gpio controllers in the device tree of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
| * | dt: bcm63158: add gpio controllerPhilippe Reynes2019-04-121-0/+80
| | | | | | | | | | | | | | | | | | Add 8 gpio controllers in the bcm63158 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
| * | gpio: do not include <asm/arch/gpio.h> on ARCH_BCM63158Philippe Reynes2019-04-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | As no gpio.h is defined for this architecture, to avoid a compilation failure, do not include <asm/arch/gpio.h> for arch bcm63158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
| * | dt: bcm968580xref: enable gpio controllerPhilippe Reynes2019-04-121-0/+32
| | | | | | | | | | | | | | | | | | | | | Enable all the gpio controllers in the device tree of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
| * | dt: bcm6858: add gpio controllerPhilippe Reynes2019-04-121-0/+80
| | | | | | | | | | | | | | | | | | Add 8 gpio controllers in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
| * | gpio: do not include <asm/arch/gpio.h> on ARCH_BCM6858Philippe Reynes2019-04-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for arch bcm6858. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
| * | dt: bcm968380gerg: enable gpio controllerPhilippe Reynes2019-04-121-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Enable the gpio controllers in the device tree of the board bcm968380gerg. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | dt: bcm6838: add gpio controllerPhilippe Reynes2019-04-121-0/+27
| | | | | | | | | | | | | | | | | | | | | Add gpio controllers in bcm6838 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | mips: add initial support for qca956x referenced boardRosy Song2019-04-1213-0/+1432
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup
| * | mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956XRosy Song2019-04-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | See details in chapter 8.6.2 and 8.6.4 (page 140-141) of qca9563 datasheet, NFRAC[17:0] So the mask of [17:5] is 0x1fff not 0x3fff. Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2-v3: - add more information for this commit Changes for v4-v5: - coding style cleanup
| * | bootm: mips: Remove boot_reloc_ramdiskHoratiu Vultur2019-04-121-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the function boot_reloc_ramdisk in the file arch/mips/lib/bootm because it is relocating again the ramdisk. The function do_bootm_states() already relocates the ramdisk even if it is a legacy uImage or a FIT image. The relocation in the function do_bootm_states() was introduce in the commit c2e7e72bb9f0cb47d024997b381cb64786eb5402 ("bootm: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH set") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | mips: mt76xx: gardena-smart-gateway: Correct spelling of GARDENAStefan Roese2019-04-122-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes Gardena to the correct GARDENA spelling. Also the platform name is "GARDENA smart Gateway". This patch changes the incorrect occurrances. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | mips: add ethernet support for qca953x referenced boardsRosy Song2019-04-122-0/+36
| |/ | | | | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* | Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-bootTom Rini2019-04-1226-139/+1627
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
| * | ARM: dts: Add STMFX gpio expander support for stm32mp157c-ev1Patrick Delaunay2019-04-123-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds alias to set the pincontrol seq id. For STMFX gpio expander, force sequence number after the last bank (GPIOZ) to avoid conflict between STM32MP and STMFX gpio bank sequence number. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
| * | ARM: dts: stm32mp1: Add adc nodesPatrice Chotard2019-04-122-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | Add adc related nodes. These nodes are used to detect the current supplied by USB type-C power in port on DK1 and DK2 boards. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
| * | ARM: dts: stm32: Synchronize DT with kernel onePatrice Chotard2019-04-1212-72/+1108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/ This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
| * | stm32mp1: dts: activate psci-1.0Patrick Delaunay2019-04-121-1/+1
| | | | | | | | | | | | | | | | | | | | | Updates the stm32mp157c devicetree to bind the U-Boot PSCI driver need for power off command; TF-A for stm32mp15x supports PSCI 1.0. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: add command poweroffPatrick Delaunay2019-04-123-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | Activate the command poweroff by default for STM32MP1: - with PCSI from TF-A for trusted boot - with PMIC sysreset request for basic boot (SYSRESET_POWER) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | power: rename stpmu1 to official name stpmic1Patrick Delaunay2019-04-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
| * | power: stpmu1: rename files to stpmic1Patrick Delaunay2019-04-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Prepare file modification for kernel alignment and rename driver to stpmic1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
| * | stm32mp1: Replace OTP read by SHADOW readPatrick Delaunay2019-04-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Replace STM32_BSEC_OTP() by STM32_BSEC_SHADOW() to increase read performance. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: bsec: shadow all the upper OTP (no secure) during bootPatrick Delaunay2019-04-121-1/+19
| | | | | | | | | | | | Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: bsec: use device tree new compatiblePatrick Delaunay2019-04-124-12/+12
| | | | | | | | | | | | | | | | | | Update bsec driver to use the device tree provided by Kernel. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: basic boot: SPL enable access to GPIOZ bankPatrick Delaunay2019-04-121-0/+8
| | | | | | | | | | | | | | | | | | | | | SPL need to set GPIOZ_SECCFGR = 0 to enable access to GPIOZ bank (open security). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: align serial number on bootromPatrick Delaunay2019-04-121-1/+1
| | | | | | | | | | | | | | | | | | Always use upper case for serial number. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: add some syscon drivers for syscfg and etpzcPatrick Delaunay2019-04-123-6/+9
| | | | | | | | | | | | | | | | | | Add SYSCON driver for syscfg and etpzc and reorder in alphabetics order Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: support forced boot modePatrick Delaunay2019-04-123-3/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The boot mode can be forced by key press or by TAMP register, requested in kernel by syscon-reboot-mode tamp: tamp@5c00a000 { compatible = "simple-bus", "syscon", "simple-mfd"; reg = <0x5c00a000 0x400>; reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x150>; /* reg20 */ mask = <0xff>; mode-normal = <0>; mode-fastboot = <0x1>; mode-recovery = <0x2>; mode-stm32cubeprogrammer = <0x3>; mode-ums_mmc0 = <0x10>; mode-ums_mmc1 = <0x11>; mode-ums_mmc2 = <0x12>; }; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: spl: hang with trace when DDR init failedPatrick Delaunay2019-04-121-2/+2
| | | | | | | | | | | | | | | | | | | | | When DDR initialization failed, print error message and stop the SPL execution. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: cosmetic: add comment on psci_migrate_info_type return valuePatrick Delaunay2019-04-121-1/+7
| | | | | | | | | | | | | | | | | | | | | Add explaination for the return value of psci_migrate_info_type: 2 = Trusted OS. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: cosmetic cleanup KconfigPatrick Delaunay2019-04-121-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cosmetic cleanup in mach-stm32mp Kconfig - remove duplicated SPL_DRIVERS_MISC_SUPPORT - update help for TARGET_STM32MP1 - set value for NR_DRAM_BANKS - remove one comment as DEBUG_UART is deactivated by default - include board Kconfig at the end of the file Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: spl: add spl_display_printPatrick Delaunay2019-04-122-0/+18
| | | | | | | | | | | | | | | | | | SPL displays the board model from device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: update print_cpuinfo()Patrick Delaunay2019-04-122-8/+104
| | | | | | | | | | | | | | | | | | Display CPU part number and package information. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: update boot mode managementPatrick Delaunay2019-04-124-16/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | - export the function get_bootmode() and reused it in spl code - manage uart instance by alias (prepare v4.19 binding) - solve issue on nand instance - restore console for uart boot Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | stm32mp1: add runtime information in environmentPatrick Delaunay2019-04-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set board name with the first dts compatible found in DT code under CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG The result with DEVICE_TREE=stm32mp157c-ev1 is: STM32MP> env print board=stm32mp1 board_name=stm32mp157c-ev1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
View Lorry Controller Status