summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeFilesLines
* arm: dts: rk3188: Add rk3188-u-boot.dtsiJagan Teki2020-01-302-0/+6
| | | | | | | | | | | | Add U-Boot specific dtsi file for rk3188 SoC. This would help to add U-Boot specific dts nodes, properties which are common across rk3188. Right now, the file is empty, will add required changes in future patches. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* arm: dts: rk3036: Add rk3036-u-boot.dtsiJagan Teki2020-01-302-0/+6
| | | | | | | | | | | | Add U-Boot specific dtsi file for rk3036 SoC. This would help to add U-Boot specific dts nodes, properties which are common across rk3036. Right now, the file is empty, will add required changes in future patches. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockpro-rk3399: Enable SPI FlashJagan Teki2020-01-301-0/+4
| | | | | | | Enable winbond SPI flash for ROC-PC-RK3399 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* roc-pc-rk3399: Enable SPI FlashJagan Teki2020-01-301-0/+4
| | | | | | | Enable winbond SPI flash for ROC-PC-RK3399 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: dts: Sync ROC-RK3399-PC changes from LinuxJagan Teki2020-01-302-670/+816
| | | | | | | | | | | Sync the ROC-RK3399-PC device tree changes from Linux with below commit details: commit <c36308abe4110e4db362d5e2ae3797834a7b1192> ("arm64: dts: rockchip: Enable MTD Flash on rk3399-roc-pc") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini2020-01-282-2/+3
|\ | | | | | | - Various exynos fixes
| * arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card)Marek Szyprowski2020-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | Use MMC0 for eMMC and MMC2 for SD-card as other Exynos-based boards do. This allows to use common code to get MMC device id based on the XOM[7:5] pins. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: dts: exynos: Fix card-detect polarity for SD card on Odroid U3/X2Marek Szyprowski2020-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | Card detect line for SD-card on Odroid U3/X2 boards are active low, so add cd-inverted property to indicate this, as u-boot's GPIO driver doesn't support specifying line polarity. This restores S5P_SDHCI driver operation on Odroid U3/X2 boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: dts: exynos: Extend board descriptionMarek Szyprowski2020-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | u-boot uses the same DTS for the all Odroid XU3-based boards, so list them in the model description to let user know that those boards are supported. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiWIP/26Jan2020Tom Rini2020-01-2642-735/+1657
|\ \ | | | | | | | | | | | | | | | | | | - Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai) - Allwinner R40 Ethernet, usb phy enablement (Andre Przywara) - Sunxi auto load from 128KB MMC offset (Andre Przywara) - Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
| * | sunxi: dts: R40: Update Bananapi M2 Berry .dtsAndre Przywara2020-01-241-15/+120
| | | | | | | | | | | | | | | | | | | | | | | | Update the .dts file from the kernel, which carries much more nodes, some of them we need to enable USB and Ethernet support for the board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
| * | sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108Chen-Yu Tsai2020-01-2441-720/+1537
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* | | usb: musb-new: mt85xx: add musb-new gadget driver.mingming lee2020-01-251-0/+13
| | | | | | | | | | | | | | | | | | | | | Using musb-new structure for mt85xx gadget driver. Add gadget driver dts for mt8518 SoCs. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
* | | bcm968360bg: add initial supportPhilippe Reynes2020-01-232-0/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add the initial support of the broadcom reference board bcm968360bg with a bcm68360 SoC. This board has 512 MB of RAM, 256 MB of flash (nand), 2 USB port, 1 UART, and 4 ethernet ports. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
* | | bcm68360: add initial supportPhilippe Reynes2020-01-231-0/+217
| | | | | | | | | | | | | | | | | | This add the initial support of the broadcom bcm68360 SoC family. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
* | | board: Add new Samsung "stemmy" board based on ST-Ericsson U8500Stephan Gerhold2020-01-222-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ST-Ericsson U8500 SoC has been used in mass-production for some Android smartphones released around 2012. In particular, Samsung has released more than 5 different smartphones based on U8500, e.g. - Samsung Galaxy S III mini (GT-I8190) "golden" - Samsung Galaxy S Advance (GT-I9070) "janice" - Samsung Galaxy Xcover 2 (GT-S7710) "skomer" and a few others. Mainline Linux has great support for the Ux500 SoC, so these smartphones can also run Linux mainline quite well. Unfortunately, the original Samsung bootloader used on these devices has limitations that prevent booting Linux mainline directly. It keeps the L2 cache enabled, which causes Linux to crash very early, shortly after decompressing the kernel. Using U-Boot allows to circumvent these limitations. We can let the Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache before booting into Linux. U-Boot has several other advantages - it supports device-trees directly and we are no longer limited to flashing Android boot images through Samsung's proprietary download mode. The Samsung "stemmy" board covers all Samsung devices based on U8500. Add minimal support for "stemmy". For now only UART is supported but this will be extended later. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* | | arm: Add support for ST-Ericsson U8500 SoCStephan Gerhold2020-01-221-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NovaThor U8500 SoC was released by ST-Ericsson in 2011. It was used for some development boards like the CALAO Systems Snowball SBC, but mass production was primarily for Android smartphones like the Samsung Galaxy S III mini. Previous support for U8500 was removed in commit 68282f55b846 ("arm: Remove unused ST-Ericsson u8500 arch") since none of the boards were converted to generic boards before the deadline. The new code does not have much in common with the previous code. I have completely rewritten everything, embracing the Driver Model and device trees wherever possible. The U8500 support is a bit more minimal for now - my primary use case is to use U-Boot as alternative bootloader for some of the U8500 Samsung smartphones. At the moment U-Boot is chain-loaded from the original Samsung bootloader. A side effect of this is that we can (temporarily) get away without implementing some functionality - e.g. all clocks are already enabled by the original bootloader. More functionality will be added in future patches. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: John Rigby <john.rigby@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* | | arm: dts: Import device tree for ST-Ericsson Ux500Stephan Gerhold2020-01-223-0/+1747
| |/ |/| | | | | | | | | | | | | | | | | | | from https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git/ tag "ux500-armsoc-v5.6-2" commit 224bf0fe7292 ("ARM: dts: ux500: samsung-golden: Add Bluetooth") (queued for merge in Linux 5.6) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini2020-01-213-0/+26
|\ \ | | | | | | | | | | | | - Clearfog: Add run-time board detection with TLV EEPROM support (Baruch)
| * | ARM: mvebu: clearfog: add EEPROM devicesBaruch Siach2020-01-213-0/+26
| |/ | | | | | | | | | | | | | | | | | | | | Add device-tree description for the EEPROM devices on Armada 388 SOM rev 2.1. Another EEPROM is now on Clearfog Pro carrier rev 2.2, and Clearfog Base rev 1.3. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
* | Merge tag 'u-boot-imx-20200121' of ↵WIP/21Jan2020Tom Rini2020-01-214-1/+282
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
| * | arm: dts: imx7ulp-evk: remove mux value from pad configurationJorge Ramirez-Ortiz2020-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
| * | arm: dts: i.mx8x: add #cooling-cells propertiesAnatolij Gustschin2020-01-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix dtb building warnings: Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0: Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from cooling-device[0]) Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
| * | ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas2020-01-202-0/+277
| |/ | | | | | | | | | | | | | | | | | | Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | Merge tag '2020-01-20-ti-2020.04' of ↵WIP/20Jan2020Tom Rini2020-01-2016-7/+970
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
| * | arm: dts: k3-am654-base-board: enable USB1Vignesh Raghavendra2020-01-202-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux for USB1 and enable it as a peripheral port in U-Boot specific dtsi since U-Boot does not support OTG. Disable USB0 as its not available on the baseboard. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | arm: dts: k3-am65-main: add USB supportVignesh Raghavendra2020-01-201-0/+78
| | | | | | | | | | | | | | | | | | | | | Add support for USB0 and USB1 instances on the AM6 SoC. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtbAdam Ford2020-01-204-1/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of these boards boot, but the solution appears to be the same. All the boards have SPL that is too large. With a few defconfig options removed, these corresponding options can be removed from their respective SPL dtb files. This patch unifies the DM37/OMAP35 boards' -u-boot.dtsi files to remove gpio's, i2c, bandgap, thermal zones, unneeded uarts, and unneeded MMC nodes. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | arm: dts: k3-am654-r5-base-board: Fix power-domains for wkup_vtm0Lokesh Vutla2020-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wkup_vtm populates only 1 power-domain cell in it's node. But the power-domain cell are defined as 2. Due to this the following warning comes during build: arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/interconnect@42040000/ wkup_vtm@42050000:power-domains: property size (8) too small for cell size 2 Fix this by updating the power-domain cells. Fixes: cfa6bd549c ("arm: dts: k3-am654-r5-base-board: Add VTM node") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 useAndreas Dannenberg2020-01-202-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | Make the wkup_i2c0 module usable across all stages of U-Boot by adding the needed definitions including the associated pinmux definitions. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | board: ti: beagleboneai: add dts fileJason Kridner2020-01-202-0/+577
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard.org BeagleBone AI is an open source hardware single board computer based on the Texas Instruments AM5729 SoC featuring dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital signal processor (DSP), quad-core embedded vision engine (EVE), Arm Cortex-M4 processors, dual programmable realtime unit industrial control subsystems and more. The board features 1GB DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash, 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion headers. For more information, refer to: https://beaglebone.ai The corresponding patch against the mainline linux kernel can be found at: https://patchwork.kernel.org/patch/11254903/ This patch introduces the BeagleBone AI device tree. Note that the device use the "ti,tpd12s016" component which is software compatible with "ti,tpd12s015". Thus we only use the latter driver. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | arm: dts: k3-j721e-common-proc-board: Add pinmux for SD cardFaiz Abbas2020-01-203-1/+39
| | | | | | | | | | | | | | | | | | | | | Add pinmux for sdhci1 node connected to the SD card. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | arm: dts: k3-j721e-common-proc-board: Remove voltage-ranges from sdhci nodesFaiz Abbas2020-01-201-2/+0
| | | | | | | | | | | | | | | | | | | | | voltage-ranges properties are NOP. Remove them. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | mmc: am654_sdhci: Get Xin clock by nameFaiz Abbas2020-01-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Get clk_xin by name instead of by index to avoid having to put clocks in the same order in all devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | ARM: dts: da850-lcdk: Update DTS files for SPL device tree supportAdam Ford2020-01-202-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the da850-lcdk uses SPL_OF_PLATDATA and manually loads the necessary source code instead of using the auto-generated, because the drivers don't properly autogenerate the code. This patch simply enables the various device tree options to mimic the da850-evm which doesn't need or use OF_PLATDATA for device tree support. It does not disable OF_PLATDATA. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | arm: dts: k3-j721e: Add DT nodes for USBVignesh Raghavendra2020-01-204-0/+128
| |/ | | | | | | | | | | | | | | | | J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: dts: stm32: Add missing ETHCK clock to ethernet nodeMarek Vasut2020-01-171-0/+2
| | | | | | | | | | | | | | | | | | Add missing 'eth-ck' clock to the ethernet node. These clock are used to generate external clock signal for the PHY in case 'st,eth_ref_clk_sel' is specified. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
* | stm32mp1: split board and SOC support for STM32MP15x familyPatrick Delaunay2020-01-171-1/+1
|/ | | | | | | | | | | | Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* Merge tag 'xilinx-for-v2020.04' of ↵Tom Rini2020-01-1616-87/+1023
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
| * ARM: dts: zynq: enablement of coresight topologyZumeng Chen2020-01-141-0/+135
| | | | | | | | | | | | | | | | | | | | This patch is to build the coresight topology structure of zynq-7000 series according to the docs of coresight and userguide of zynq-7000. Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com> Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Sync gem clock nodes with mainline LinuxMichal Simek2020-01-141-9/+13
| | | | | | | | | | | | Just fixing indentation and update year in Copyright. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Sync gpio-controller name locationMichal Simek2020-01-141-1/+1
| | | | | | | | | | | | | | | | | | Sync location with mainline kernel. Added by Linux kernel commit 75926f07baae ("arm64: dts: zynqmp: Add missing gpio-controller to ps gpio"). Fixes: 0b33e0b15600 ("arm64: zynqmp: Add missing gpio property to dtsi") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source propertySudeep Holla2020-01-144-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the legacy "gpio-key,wakeup" boolean property is already replaced with "wakeup-source". However few occurrences of old property has popped up again, probably from the remnants in downstream trees. This patch replaces the legacy properties with the unified "wakeup-source" property introduced by: "Input: gpio_keys - switch to using generic device properties" (sha1: 700a38b27eefc582099fdf69effacfad0ad738a4) Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: dts: zcu100-revC: Give wifi some time after power-onJan Kiszka2020-01-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somewhere along recent changes to power control of the wl1831, power-on became very unreliable on the Ultra96, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, Ultra96 is already happy with 10 ms. Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: dts: zynqmp: Fix node names which contain "_"Michal Simek2020-01-146-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | s/_/-/ for node names. It fixes warnings like this: ... Warning (node_name_chars_strict): /cpu_opp_table: Character '_' not recommended in node name ... Issues reported by make dtbs W=12 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: dts: Remove inconsistent use of 'arm,armv8' compatible stringRob Herring2020-01-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'arm,armv8' compatible string is only for software models. It adds little value otherwise and is inconsistently used as a fallback on some platforms. Remove it from those platforms. This fixes warnings generated by the DT schema. Reported-by: Michal Simek <michal.simek@xilinx.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Chanho Min <chanho.min@lge.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB upMichal Simek2020-01-141-1/+1
| | | | | | | | | | | | | | | | zcu102-revB/up are not removing phy from revA properly because of incorrect name. Fixes: 2975a42b42c5 ("arm64: zynqmp: Use ethernet-phy as node name for ethernet phys") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Add support for zcu1285 revA boardMichal Simek2020-01-142-0/+246
| | | | | | | | | | | | | | | | | | | | zcu1285 is the same as zcu1275 but it is using Avnet FMC http://www.ultrazed.org/product/network-fmc-module Unfortunately not everything is connected now that's why this is only describing system which Xilinx is using. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: zynqmp: Switch zcu100 revC to use firmware clock driverMichal Simek2020-01-141-1/+1
| | | | | | | | | | | | | | There is no issue with using firmware based driver instead of fixed clock one. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynqmp: dts: Cleanup no-1-8-v property from sdhci dt nodesT Karthik Reddy2020-01-143-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Removed no-1-8-v property from zynqmp sdhci devicetree nodes to allow UHS-I capable SD cards to work in SD3.0 UHS modes. Boards that does not have level shifter for SD, does not support 1.8v. so no-1-8-v property to sdhci dt nodes should be present in zcu102 Rev-A,B, zcu104 Rev-A,C, zcu100, zcu1275 Rev-B boards. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
View Lorry Controller Status