summaryrefslogtreecommitdiff
path: root/arch/arm/dts
Commit message (Collapse)AuthorAgeFilesLines
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini2019-07-112-0/+30
|\ | | | | | | | | | | | | | | | | | | | | | | | | - SPL SATA enhancements to allow booting from RAW SATA device needed for Clearfog (Baruch) - Enable SATA booting on Clearfog (Baruch) - Misc changes to Turris Omnia (Marek) - Enable CMD_BOOTZ and increase SYS_BOOTM_LEN on crs305-1g-4s (Luka) - Enable FIT support for db-xc3-24g4xg (Chris) - Enable DM_SPI on Keymile Kirkwood board with necessary changes for this (Pascal) - Set 38x and 39x AVS on lower frequency (Baruch)
| * km/spi: add SPI configuration to KM Kirkwood device treePascal Linder2019-07-111-0/+22
| | | | | | | | | | | | | | | | | | In order to migrate the SPI flash interface to the driver model, the SPI configuration needs to be added in the KM Kirkwood device tree file. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * arm: mvebu: clearfog: enable SATA in SPLBaruch Siach2019-07-111-0/+8
| | | | | | | | | | | | | | | | Enable SATA peripherals in SPL to allow boot from SATA. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm64: dts: uniphier: add reserved-memory for secure memoryMasahiro Yamada2019-07-103-6/+33
|/ | | | | | | | | | | | | [ Linux commit aa38571246c6ac279ebebd141157297bcb959d76 ] The memory regions specified by /memreserve/ are passed to early_init_dt_reserve_memory_arch() with nomap=false, so it is not suitable for reserving memory for Trusted Firmware-A etc. Use the more robust /reserved-memory node with the no-map property to prevent the kernel from mapping it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: at91: sama5d2_xplained: fix QSPI0 nodeCyrille Pitchen2019-07-091-19/+17
| | | | | | | | | | | | Fix the following: - use "jedec,spi-nor" binding, we use jedec compatible flashes - set bus width to 4, we use quad capable flashes - differentiate bewteen data and clk and cs pins - drop partions as we don't use them in u-boot. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> [tudor.ambarus@microchip.com: use "jedec,spi-nor", edit commit message] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
* Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-bootTom Rini2019-07-0525-75/+1238
|\ | | | | | | | | | | | | - fix complation error for CONFIG_USB - update RPi3 DTBs to v5.1-rc6 state - add defconfig for RPi3 B+ - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
| * fdt: update bcm283x device tree sources to Linux 5.1-rc6 stateHeinrich Schuchardt2019-06-1225-75/+1238
| | | | | | | | | | | | | | | | | | | | | | | | | | Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
* | wandboard: Add FIT image supportFabio Estevam2019-07-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | After the transition to DM, only the mx6dl/solo wandboard is supported. Add FIT image support so that all the wandboard variants can be supported, like it was prior to the DM conversion. Successfully booted Linux on mx6q/solo/qp wandboards. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | wandboard: Add mmc0 aliasFabio Estevam2019-07-041-0/+4
| | | | | | | | | | | | | | Add a mmc0 alias so that U-Boot proper can associate mmc0 with the boot SD card. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | wandboard: Import extra wandboard devicetree filesFabio Estevam2019-07-043-0/+241
| | | | | | | | | | | | | | Import wandboard devicetree files so that the mx6q and mx6qp variants can be properly supported. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | wandboard: Sync with devicetree files from kernel 5.1.9Fabio Estevam2019-07-043-112/+11
| | | | | | | | | | | | | | Udate the wandboard devicetree files with the ones from kernel 5.1.9. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | mx6: dts: Move dtbs under SoC levelFabio Estevam2019-07-041-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | Place dtbs under SoC level rather than board level. imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were placed under the board config option, so move them to SoC level. This also aligns with the kernel dts Makefile format. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | mx6: dts: Keep dtb entries sortedFabio Estevam2019-07-041-2/+2
| | | | | | | | | | | | | | Keep dtb entries sorted to help adding new dtbs in an organized form. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in splKever Yang2019-07-021-0/+24
| | | | | | | | | | | | | | rockchip pinctrl driver has update to use dts, so we need to add the pinctrl config in SPL for sdmmc. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dtsKever Yang2019-07-022-19/+30
| | | | | | | | | | | | | | | | | | Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts into rk3288-tinker-u-boot.dtsi. When both board level and soc level '-u-boot.dtsi' files exist, we need to include the soc level 'rk3288-u-boot.dtsi' manually. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | rockchip: dts: rk3288: move reloc tag into -u-boot dtsKever Yang2019-07-024-8/+40
| | | | | | | | | | | | | | Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi into rk3288-u-boot.dtsi. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | rockchip: dts: rk3399: rockpro64: Provide init voltageMark Kettenis2019-07-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | Add missing regulator-init-microvolt property to vdd_log regulator. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Rebase on latest u-boot-rockchip master) Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
* | Merge tag 'u-boot-imx-20190628' of ↵Tom Rini2019-06-285-158/+1076
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board
| * | ARM: dts: imx: m53menlo: Import M53Menlo DT from LinuxMarek Vasut2019-06-274-1/+488
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 . Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi, the GPIO controllers need to be inited early, otherwise m53_set_clock() won't be able to detect the correct CPU clock frequency by reading the GPIO. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | ARM: dts: imx: imx53: Synchronize iMX53 DT with LinuxMarek Vasut2019-06-271-157/+588
| | | | | | | | | | | | | | | | | | | | | | | | | | | Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 , this is needed to get NFC, UART, USBOTG DT nodes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | | Merge tag 'u-boot-stm32-20190628' of ↵Tom Rini2019-06-282-6/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-stm STM32 MCU fixes/cleanup: - Fix SPL console for STM32F769 Discovery - Fix Memory Protection Unit size for STM32F4 series - Cleanup DT for STM32F746 Discovery
| * | | ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in ↵Patrice Chotard2019-06-281-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stm32f746-disco-u-boot.dtsi As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc" property, no need to add them again in stm32f746-disco-u-boot.dtsi. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
| * | | ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-discoPatrice Chotard2019-06-281-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | This allow to get console output in SPL for stm32f769-disco. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | | | rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2Jagan Teki2019-06-263-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific properties. Move them into rk3399-u-boot.dtsi so the boards which enabled these node will available during SPL. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | | | rockchip: dts: rk3328: add rk3328-rock64.dtsMatwey V. Kornilov2019-06-263-1/+330
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rk3328-rock64.dts has been taken from Linux kernel commit cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64") with minor modifications (drop nodes not known by rk3328.dtsi). Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | | Merge tag 'u-boot-stm32-20190619' of ↵Tom Rini2019-06-201-4/+0
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Update STM32MP entry in MAINTAINERS - Handle correctly binding for g-tx-fifo-size for USB DWC2 driver - Fix trusted STM32MP1 defconfig with correct ethernet driver
| * | | ARM: dts: stm32mp1: remove override for g-tx-fifo-sizePatrick Delaunay2019-06-191-4/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | Remove the override for usbotg_hs on g-tx-fifo-size as the correct binding, used in the kernel device tree, is now supported in dwc2 device driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | | armv8: ls1046afrwy: Add support for LS1046AFRWY platformVabhav Sharma2019-06-192-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | | arm: ls1028a: define the integrated PCI bus (ECAM)Alex Marginean2019-06-191-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1028A includes an integrated PCI bus with 11 PCI functions residing on bus 0. ECAM plus the device register space takes up 256MB of address space. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | | ARM: dts: ls1021a: Fixed reg for sata nodePeng Ma2019-06-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch is to fixed the reg read to "0" for armv7 architecture. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | | armv8: lx2160aqds: Enable eSDHC controllersYinbo Zhu2019-06-191-0/+8
| | | | | | | | | | | | | | | | | | | | | This patch is to enable esdhc controllers for lx2160aqds Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | | armv8: ls1028a: Add ecc address node for sata.Peng Ma2019-06-191-2/+3
| | | | | | | | | | | | | | | | | | | | | Move the ecc addr from driver to dts Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | | armv8: lx2160aqds: Enable sataPeng Ma2019-06-191-0/+15
|/ / | | | | | | | | | | | | Change sata node status to enable sata. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | arm: dts: Stratix10: Enable i2cLey Foon Tan2019-06-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Enable i2c1 in Stratix 10 devkit. SOCFPGA_STRATIX10 # i2c bus Bus 0: i2c@ffc02900 SOCFPGA_STRATIX10 # i2c dev 0 Setting bus to 0 SOCFPGA_STRATIX10 # i2c probe Valid chip addresses: 14 4C 51 68 74 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
* | Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-bootTom Rini2019-06-117-9/+714
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | - Add Ethernet support for STM32MP1 - Add saveenv support for STM32MP1 - Add STM32MP1 Avenger96 board support - Add SPI driver suport for STM32MP1 - Add watchdog support for STM32MP1 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
| * | ARM: dts: stm32: Add Ethernet support on stm32mp1Christophe Roullier2019-06-063-9/+18
| | | | | | | | | | | | | | | | | | This patch add Ethernet support on stm32mp157 eval board Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
| * | ARM: dts: stm32mp: Add iwdg2 support for stm32mp157cPatrice Chotard2019-06-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds independent watchdog support for stm32mp157c in SPL. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | stm32mp1: activate NAND and NOR support on EV1Patrick Delaunay2019-06-063-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the necessary configuration to have NAND and NOR support on ev1 board for BASIC boot (with SPL) or for TRUSTED boot (with TF-A). STM32MP> nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00184200 bbt options 0x00060000 STM32MP> sf probe SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * | board: stm32mp1: Add Avenger96 board supportManivannan Sadhasivam2019-06-063-0/+554
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Avenger96 board from Arrow Electronics based on STM32MP157 MPU. This board is one of the Consumer Edition (CE) boards of the 96Boards family and has the following features: SoC: STM32MP157AAC PMIC: STPMIC1A RAM: 1024 Mbyte @ 533MHz Storage: eMMC v4.51: 8 Gbyte microSD Socket: UHS-1 v3.01 Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac Bluetooth®v4.2 (BR/EDR/BLE) USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4 LED: 4x User LED, 1x WiFi LED, 1x BT LED More information about this board can be found in 96Boards website: https://www.96boards.org/product/avenger96/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
| * | arm: dts: stm32mp157: Add missing pinctrl definitionsManivannan Sadhasivam2019-06-061-0/+63
| | | | | | | | | | | | | | | | | | | | | Add missing pinctrl definitions for STM32MP157. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* | | Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imxTom Rini2019-06-1118-11/+3593
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot-imx-20190612 -------------------- - Board fixes: - imx6logic - wandboard - mx6sabre boots again - imx8qm_mek - pico-* boards - Toradex apalis / colibri - engicam imx6 (environment) - KP MX53 - opos6ul - Switch to DM: - vining2000 - dh MX6 - Toradex colibri i.MX7 - Novena - Security : fix CSF size for HAB - Other: - imx: fix building for i.mx8 without spl - pcie and switch to DM mx6sabreauto: Enable SPL SDP support
| * | arm: dts: imx6qdl-u-boot: Alias usb0 to usbotgSjoerd Simons2019-06-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All i.mx6 boards seems to have moved to DM_USB, however gadget support for mx6 is still pre-DM as CI_UDC isn't converted yet. To make this work the usb otg controller used for gadgets needs to be usb number 0. Add an alias for this directly in the main u-boot mx6qdl dtsi so it doesn't need to be done for each board separately. This fixes regressions wrt. usb gadget functionality in several boards that have gadget functions enabled in their config, but no usb0 alias in their device-tree. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
| * | ARM: imx: vining2000: Convert MMC and block to DMMarek Vasut2019-06-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
| * | ARM: dts: imx: vining2000: Import VINING|2000 DT from LinuxMarek Vasut2019-06-112-1/+575
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import iMX6SX VINING|2000 device tree from Linux 5.1.1 b724e9356404 . Enable DT control in full U-Boot . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: Extend PCL063 support for phyCORE-i.MX6ULL SOMParthiban Nallathambi2019-06-114-6/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend PHYTEC phyBOARD-i.MX6UL for phyCORE-i.MX6UL SoM (PCL063) with eMMC on SoM. CPU: Freescale i.MX6ULL rev1.0 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 38C Reset cause: POR Model: Phytec phyBOARD-i.MX6ULL-Segin SBC Board: PHYTEC phyCORE-i.MX6ULL DRAM: 256 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial@02020000 Out: serial@02020000 Err: serial@02020000 Net: FEC0 Working: - Eth0 - i2C - MMC/SD - eMMC - UART (1 & 5) - USB (host & otg) Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
| * | board: toradex: add apalis imx8qm 4gb wb it v1.0b module supportMarcel Ziswiler2019-06-113-0/+744
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds initial support for the Toradex Apalis iMX8QM 4GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Gigabit Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QM as of yet. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
| * | arm: dts: imx8qm: add support for i2c0, i2c1, i2c2, i2c3 and i2c4Marcel Ziswiler2019-06-111-0/+75
| | | | | | | | | | | | | | | | | | | | | Add support for i2c0, i2c1, i2c2, i2c3 and i2c4. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
| * | arm: dts: imx8qm: add lpuart1, lpuart2, lpuart3, lpuart4Marcel Ziswiler2019-06-111-0/+80
| | | | | | | | | | | | | | | | | | | | | Add support for lpuart1, lpuart2, lpuart3 and lpuart4. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
| * | ARM: imx: novena: Convert block devices to DMMarek Vasut2019-06-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable DM block, DM MMC and DM SATA support on iMX6Q Novena convert board code to match the DM support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
| * | ARM: dts: imx: novena: Import Novena DT from LinuxMarek Vasut2019-06-112-1/+794
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import iMX6Q Novena device tree from Linux 5.1-rc7 37624b58542f . Enable DT control in full U-Boot . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
View Lorry Controller Status