summaryrefslogtreecommitdiff
path: root/arch/arm/dts/sam9x60.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: at91: sam9x60: enable slewrate/high drive for sdhci0 pinoutEugen Hristev2020-11-261-6/+12
| | | | | | | Align the pin setup for sdhci0 with linux kernel. This means to have slew rate enable and high drive strength. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* ARM: dts: sam9x60: use CCF compatibles for PMCClaudiu Beznea2020-10-191-108/+25
| | | | | | | Use CCF compatible for PMC. With this, the board/SoC will be able to boot. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* ARM: dts: sam9x60: use slow clock CCF compatible bindingsClaudiu Beznea2020-10-191-28/+12
| | | | | | | | Use slow clock CCF compatible DT bindings. This will not break the above functionality as the SoC is not booting with current PMC bindings. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* ARM: dts: sam9x60ek: add clock frequencies to board fileClaudiu Beznea2020-10-191-2/+0
| | | | | | | Slow Xtal and Main Xtal are board specific. Add their proper frequency to board file. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* ARM: dts: sam9x60: add flx0 nodeEugen Hristev2019-10-241-0/+15
| | | | | | Add node for Flexcom0. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* ARM: dts: at91: sam9x60: add onewire nodeEugen Hristev2019-10-081-0/+19
| | | | | | Add onewire node for w1 support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* ARM: dts: at91: sam9x60ek: Enable qspi nodeTudor Ambarus2019-10-081-0/+29
| | | | | | | | | | The sam9x60 qspi controller uses 2 clocks, one for the peripheral register access, the other for the qspi core and phy. Both are mandatory. Enable the qspi node together with the SST26VF064B qspi nor flash memory. Booting from the QSPI NOR flash is now possible. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
* ARM: dts: at91: sam9x60: Add macb0 Ethernet controllerNicolas Ferre2019-10-081-0/+31
| | | | | | | Add Ethernet controller to dtsi file and enable it on sam9x60ek platform connected with rmii. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
* ARM: dts: Add dts files for sam9x60ekSandeep Sheriker Mallikarjun2019-10-081-0/+225
add device tree files for sam9x60ek board with below changes. - Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit) - Add the reg property for the pinctrl node. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> [prasanthi.chellakumar@microchip.com: fix style/whitespace issues] Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com> [nicolas.ferre@microchip.com: - fix gclk, - fix pio/pinctrl controller definition and allow to have more than only PIOA for this SoC, - removing pinctrl address] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: - use SAM9X60's compatible for pinctrl - add drive strength and slew rate options for SDMMC0 pins.] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> [tudor.ambarus@microchip.com: - u-boot,dm-pre-reloc property in dedicated file, - fix pit len, starts from 0xFFFFFE40 and it is of len 0x10] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
View Lorry Controller Status