summaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* IPQ40xx: Add reset controller supportRobert Marko2020-09-181-0/+1
| | | | | | | Since we have a driver for the reset controller, lets add the necessary node. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
* IPQ40xx: Add SMEM supportRobert Marko2020-09-181-0/+2
| | | | | | | There is already existing driver for SMEM so lets enable it for IPQ40xx as well. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini2020-08-251-0/+24
|\ | | | | | | | | | | | | - Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
| * arm: octeontx2: Add support for OcteonTX2 SoC platformsSuneel Garapati2020-08-251-0/+14
| | | | | | | | | | | | | | | | | | This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
| * arm: octeontx: Add support for OcteonTX SoC platformsSuneel Garapati2020-08-251-0/+10
| | | | | | | | | | | | | | | | | | This patch adds support for all OcteonTX 81xx/83xx boards from Marvell. For 81xx boards, use octeontx_81xx_defconfig and for 83xx boards, use octeontx_83xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
* | board: armltd: Add support for Total Compute platformUsama Arif2020-08-241-0/+11
|/ | | | | | | | | | | | | Total Compute is based on ARM architecture and has the following features enabled in u-boot: - PL011 UART - PL180 MMC - NOR Flash - FIT image with Signature - AVB Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek2020-08-201-0/+3
| | | | | | | Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* xilinx: versal: Add new versal loadpdi commandT Karthik Reddy2020-08-201-0/+1
| | | | | | | | Versal loadpdi command is used for loading secure & non-secure pdi images. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* xen: Port Xen bus driver from mini-osOleksandr Andrushchenko2020-08-141-0/+1
| | | | | | | Make required updates to run on u-boot and strip test code. Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
* serial: serial_xen: Add Xen PV serial driverPeng Fan2020-08-141-0/+1
| | | | | | | | | | | | | Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* board: Introduce xenguest_arm64 boardAndrii Anisov2020-08-141-0/+7
| | | | | | | | | | | | | | | | Introduce a minimal Xen guest board running as a virtual machine under Xen Project's hypervisor [1], [2]. Part of the code is ported from Xen mini-os and also uses work initially done by different authors from NXP: please see relevant files for their copyrights. [1] https://xenbits.xen.org [2] https://wiki.xenproject.org/ Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
* Merge tag 'u-boot-imx-20200804' of ↵WIP/04Aug2020Tom Rini2020-08-041-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
| * imx: Add MYiR Tech MYS-6ULX supportParthiban Nallathambi2020-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
* | efi_loader: use CONFIG_STACK_SIZE in the UEFI sub-systemHeinrich Schuchardt2020-08-011-17/+0
| | | | | | | | | | | | | | | | | | | | | | The Kconfig symbol CONFIG_STACK_SIZE is used both by ARM and Microblaze with the same meaning. Move it to menu 'General setup' so that we can use it for all architectures. Use the value of CONFIG_STACK_SIZE instead of a hard coded 16 MiB value for reserving memory in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | arch: arm: use dt and UCLASS_SYSCON to get gic lpi detailsWIP/2020-07-29-add-brcm-ns3-supportRayagonda Kokatanur2020-07-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use device tree and UCLASS_SYSCON driver to get Generic Interrupt Controller (GIC) lpi address and maximum GIC redistributors count. Also update Kconfig to select REGMAP and SYSCON when GIC_V3_ITS is enabled. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | board: ns3: add support for Broadcom Northstar 3Rayagonda Kokatanur2020-07-291-0/+10
| | | | | | | | | | | | | | | | | | Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arm: add mach-nexell (all files except header files)Stefan Bosch2020-07-291-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - SPL not supported yet --> no spl-directory in arch/arm/mach-nexell. Appropriate line in Makefile removed. - clock.c: 'section(".data")' added to declaration of clk_periphs[] and core_hz. - Kconfig: Changes to have a structure like in mach-bcm283x/Kconfig, e.g. "config ..." entries moved from other Kconfig. - timer.c: 'section(".data")' added to declaration of timestamp and lastdec. - arch/arm/mach-nexell/serial.c removed because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
* | arm: Add support for Qualcomm IPQ40xx familyRobert Marko2020-07-291-0/+13
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces initial support for the popular Qualcomm IPQ40x8 and IPQ40x9 WiSoC series. IPQ40xx series have 4x Cortex A7 ARM-v7A cores. Supported are: IPQ4018, IPQ4019, IPQ4028 and IPQ4029. IPQ40x8 and IPQ40x9 use the same cores, but differ in addressable RAM size (1GB for IPQ40x9 and 256MB for IPQ40x8) and supported peripherals (IPQ40x8 lacks RGMII, LCD controller and EMMC/SDHCI controllers). IQP4028/IPQ4029 models differ from IPQ4018/IPQ4019 only by their rated temperatures rates with IPQ402X models being rated for wider temperature ranges. Initially this supports: * Simple clock driver (Only for UART1 now, will be extended) * Pinctrl driver (Supports UARTX and GPIO now, will be extended) * GPIOs already supported by msm_gpio driver with updates * UARTs already supported by serial_msm driver with updates Further peripherals will come in later patches. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ARM: mx6: make CAAM usable on the i.MX6 boardsHeinrich Schuchardt2020-07-161-1/+1
| | | | | | | | | | Even if the HAB fuse is not set we want to be able to use the Cryptographic Accelerator and Assurance Module (CAAM) for generating random numbers. So SYS_FSL_HAS_SEC should be selected even if IMX_HAB is not set. arch_misc_init() has to be called to initialize the CAAM. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* arm: Remove pengwyn boardJagan Teki2020-07-091-1/+0
| | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: Remove pepper boardJagan Teki2020-07-091-1/+0
| | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Ash Charles <ash@gumstix.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: Remove bav335x boardJagan Teki2020-07-091-1/+0
| | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Gilles Gameiro <gilles@gigadevices.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: juno: Enable DM_ETHAndre Przywara2020-07-071-1/+1
| | | | | | | | | The smc911X driver is now DM enabled, so we can switch the Juno board over to use DM_ETH for the on-board Fast Ethernet device. Works out of the box by using the DT. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* owl: Kconfig: Enable DM eth for OWL platformAmit Singh Tomar2020-07-071-0/+1
| | | | | | | This patch selects CONFIG_DM_ETH (ethernet driver is base on DM model) for Action semi owl SoC. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
* Merge tag 'u-boot-atmel-2020.10-a' of ↵Tom Rini2020-07-071-0/+1
|\ | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2020.10 cycle
| * ARM: at91: Enable SPL_SEPARATE_BSS by defaultGregory CLEMENT2020-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | According to the linker script for both armv7 and arm926ejs based SoC, BSS section was all the time separated for SPL but this symbol was only enabled on some boards. However, it is necessary to have it enabled for OF_SEPARATE configuration where DTB is appended to u-boot with DTB. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
* | spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)Lukasz Majewski2020-06-291-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the CONFIG_DM_SPI_FLASH and CONFIG_SPI_FLASH_DATAFLASH to be defined in Kconfig, not in board specific header file (include/configs/<board>.h). Before this change the CONFIG_DM_SPI_FLASH was not set in .config (so it was not possible to use CONFIG_IS_ENABLED(DM_SPI_FLASH) in SPI DM/DTS converted drivers), but it was set in u-boot.cfg file. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
* | spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)Lukasz Majewski2020-06-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes issue with defining the DM_SPI_FLASH in the configs/include/<board.h> instead of enabling this option in Kconfig. The problem is that CONFIG_IS_ENABLED(DM_SPI_FLASH) shows false as there is no DM_SPI_FLASH=y in .config (but the define is set in u-boot.cfg). As a result conversion of DM_SPI_FLASH to using CONFIG_IS_ENABLED() is not working properly. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
* | spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski2020-06-291-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: imx: soc: Switch BOARD_EARLY_INIT_F to imply on MX7Marek Vasut2020-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | There are systems where board_early_init_f() is plain empty. Switch the config option from "select" to "imply", to permit user to unset the BOARD_EARLY_INIT_F if it were to be empty. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | arm: Remove pcm051 boardJagan Teki2020-06-111-1/+0
|/ | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* ARM: uniphier: select DM_ETHMasahiro Yamada2020-05-221-0/+1
| | | | | | | | drivers/net/smc911x.c has been converted to DM. select DM_ETH to enable it for all the UniPhier platform boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* rename symbol: CONFIG_STM32 -> CONFIG_ARCH_STM32Trevor Woerner2020-05-151-1/+1
| | | | | | Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
* rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner2020-05-151-1/+1
| | | | | | Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
* rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOODTrevor Woerner2020-05-151-1/+1
| | | | | | | | Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
* rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5XTrevor Woerner2020-05-151-1/+1
| | | | | | | Have this symbol follow the pattern of all other such symbols. This patch removes a TODO from the code. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
* arm: lpc32xx: move SoC to mach-lpc32xxTrevor Woerner2020-05-151-1/+1
| | | | | | | | | | | | | | | | | | Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC) move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpc32xx. Following the checklist from commit 01f14456306c ("ARM: prepare for moving SoC sources into mach-*"): [1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx [2] add machine entry to arch/arm/Makefile [3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile [4] fix the Kconfig file path in arch/arm/Kconfig [5] (no MAINTAINERS update) Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
* arm: juno: enable USBAndre Przywara2020-05-071-0/+4
| | | | | | | | | | | | | | | | | The Juno board features a standard compliant EHCI/OHCI USB host controller pair, which we can just enable. The platform data is taken from the device tree. This allows to use USB mass storage (the only storage on a Juno r0) for loading. At least on my board USB seems a bit flaky, I need two "usb reset" sequences after the "usb start" to detect an USB hard drive. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: juno: Use PSCI based resetAndre Przywara2020-05-071-0/+2
| | | | | | | | | So far the Juno board wasn't implementing reset. Let's just use the already existing PSCI_RESET based method to avoid any extra code. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: juno: Enable OF_CONTROLAndre Przywara2020-05-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | The Arm Juno board was still somewhat stuck in "hardcoded land", even though there are stable DTs around, and one happens to actually be on the memory mapped NOR flash. Enable the configuration options to let the board use OF_CONTROL, and add a routine to find the address of the DTB partition in NOR flash, to use that for U-Boot's own purposes. This can also passed on via $fdtcontroladdr to any kernel or EFI application, removing the need to actually load a device tree. Since the existing "afs" command and its flash routines require flash_init() to be called before being usable, and this is done much later in the boot process, we introduce a stripped-down partition finder routine in vexpress64.c, to scan the NOR flash partitions for the DT partition. This location is then used for U-Boot to find and probe devices. The name of the partition can be configured, if needed, but defaults to "board.dtb", which is used by Linaro's firmware image provided. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* actions: Fix syntax for enabling SYS_RELOC_GD_ENV_ADDRTom Rini2020-05-011-1/+1
| | | | | | | The correct syntax is 'select SYS_...' and not 'select CONFIG_SYS...' Fixes: d5c819b885c2 ("actions: Move defconfig options to Kconfig") Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: migrate CONFIG_SYS_ARM_CACHE_* in KconfigPatrick Delaunay2020-05-011-0/+28
| | | | | | | | | | | | | Move CONFIG_SYS_ARM_CACHE_WRITETHROUGH and CONFIG_SYS_ARM_CACHE_WRITEALLOC into Kconfig done by moveconfig.py. Kconfig uses a choice between the 3 values supported in U-Boot, including the new configuration CONFIG_SYS_ARM_CACHE_WRITEBACK (the default configuration). The patch also avoids to select simultaneously 2 configurations. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* ARM: zynq: Setup stack size via KconfigMichal Simek2020-04-271-1/+2
| | | | | | | | | | | Stack size has been introduced by commit a69814c815b9 ("arm64: zynqmp: Set initrd_high to as high as possible") and commit 085201c246ee ("arm64: versal: Set initrd_high to as high as possible") to support setting up initrd_high as high as possible. The same change should happen for Zynq because the code is moved to xilinx common location. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* actions: Move defconfig options to KconfigAmit Singh Tomar2020-04-241-0/+1
| | | | | | | This patch moves some of the config options from bubblegum_96_defconfig to respective Kconfig files. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
* clk: actions: Add common clock driverAmit Singh Tomar2020-04-241-0/+2
| | | | | | | | This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same). Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
* arm: actions: Add common framework for Actions Owl Semi SoCsAmit Singh Tomar2020-04-241-2/+1
| | | | | | | | | This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
* Merge tag 'u-boot-amlogic-20200420' of ↵Tom Rini2020-04-201-0/+1
|\ | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - enable DM_RNG on meson boards - fix SMBIOS info on Odroid-C2 - Fix video output on GXBB/GXL/GXM boards - add USB gadget support for GXL/GXM boards
| * arm: meson: imply DM_RNGHeinrich Schuchardt2020-04-151-0/+1
| | | | | | | | | | | | | | | | | | All ARCH_MESON boards have a hardware random number generator. So we should enable building the RNG driver. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | configs: stm32mp1: replace STM32MP1_TRUSTED by TFABOOTPatrick Delaunay2020-04-151-0/+1
|/ | | | | | | | | | | | Activate ARCH_SUPPORT_TFABOOT and replace the arch stm32mp specific config CONFIG_STM32MP1_TRUSTED by the generic CONFIG_TFABOOT introduced by the commit 535d76a12150 ("armv8: layerscape: Add TFABOOT support"). This config CONFIG_TFABOOT is activated for the trusted boot chain, when U-Boot is loaded by TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqWIP/30Mar2020Tom Rini2020-03-301-0/+1
|\ | | | | | | | | | | | | | | - Fixes env variable for layerscape platforms, disable hs200. - Fixes board fixup, mux setting, enable gic, fspi on lx2160a, Fixes I2C DM Warning on ls1043a, ls1046a - Fixes RGMII port on ls1046ardb, ls1046ardb and DM_USB Warning on ls1012afrdm, ls1021aiot
View Lorry Controller Status