summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* configs: Resync with savedefconfigTom Rini2017-08-1174-175/+72
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-08-1129-61/+88
|\
| * armv8: ls2080a: Increase env sector size for qspi bootSantan Kumar2017-08-091-1/+1
| | | | | | | | | | | | | | | | Increase env sector size from 64kb to 256kb for qspi boot. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl-lsch2: csu: correct the workaround A-010315Hou Zhiqiang2017-08-092-11/+11
| | | | | | | | | | | | | | | | | | | | | | The implementation of function set_pcie_ns_access() uses a wrong argument. The structure array ns_dev has a member 'ind' which is initialized by CSU_CSLX_*. It should use the 'ind' directly to address the PCIe's CSL register (CSL_base + CSU_CSLX_PCIE*). Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * driver: net: fsl-mc: fsl_mc_ldpaa_exit exit earlier if dpl appliedSantan Kumar2017-08-091-2/+9
| | | | | | | | | | | | | | | | | | | | In fsl_mc_ldpaa_exit(), in case of mc is booted and dpl is applied, it should return earlier without executing dpbp_exit(). Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Acked-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: ls2080ardb: Add fsl_fdt_fixup_flashSantan Kumar2017-08-091-0/+28
| | | | | | | | | | | | | | | | | | | | | | IFC and QSPI are muxed on board. Add fsl_fdt_fixup_flash() to disable IFC node in dts if QSPI is enabled, or disable QSPI node in dts if otherwise. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * config: ls1012aqds: Enable USB EHCI support for ls1012aqdsRajesh Bhagat2017-08-093-1/+4
| | | | | | | | | | | | | | | | Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> [YS: Revise subject, remove commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * mmc: fsl_esdhc: not always setting esdhc fdt status to okayYang Li2017-08-091-2/+0
| | | | | | | | | | | | | | | | | | We shouldn't always change the status to okay. There could be situations that the esdhc is intentionally disabled in the device tree. Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * PCI: layerscape: Fix assigning wrong address to LS2088A pcie cfg1 spaceHou Zhiqiang2017-08-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | This bug is brought by the commit 3d8553f0a3 (pci: layerscape: add LS2088A series SoC pcie support), which only updated cfg_res.start and did not update the .end field. This causes fdt_resource_size() getting wrong value when calculate the cfg1 space address. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [YS: Revise subject and commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * dm: arm: ls1021a: Move to driver model for USBAlison Wang2017-08-0912-0/+12
| | | | | | | | | | | | | | | | | | This patch enables driver model for USB in defconfigs for LS1021A platforms. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl-lsch2: csu: remove multiple calling functionHou Zhiqiang2017-08-094-13/+0
| | | | | | | | | | | | | | | | | | Function enable_layerscape_ns_access() is alreayd called soc-wide. Remove duplicated calling from individual boards. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [YS: Add commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl-lsch2: correct the config description of DSPI clock dividerHou Zhiqiang2017-08-091-1/+1
| | | | | | | | | | | | | | It is derived from Platform clock instead of Platform PLL frequency. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board:ls2080ardb: Update execution of config_board_muxSantan Kumar2017-08-091-13/+14
| | | | | | | | | | | | | | | | | | | | Function config_board_mux() reads env variable 'hwconfig' which is only available after relocation for QSPI boot. Move calling config_board_mux() to misc_init_r(). Signed-off-by: Santan Kumar <santan.kumar@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * board/ls2080ardb: Disable SD-related GPIO programmingSantan Kumar2017-08-091-16/+2
| | | | | | | | | | | | | | | | | | | | | | Smart voltage translator is removed from LS2080ARDB/LS2088ARDB RevF boards. It is only used on LS2081ARDB. Programming GPIO is only required for LS2081ARDB. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046ardb: update core frequency to 1800MHZQianyu Gong2017-08-092-2/+2
| | | | | | | | | | | | | | | | Update the default core frequency to 1800MHZ for best performance under SD boot and eMMC boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * driver: mmc: fsl_esdhc: Fix compiling warningYork Sun2017-08-091-0/+2
| | | | | | | | | | | | | | | | Commit 4483b7eb added variable vqmmc_dev but only uses it under CONFIG_DM_REGULATOR. Add the same macro to variable declaration to get rid of compiling warning. Signed-off-by: York Sun <york.sun@nxp.com>
* | Merge git://git.denx.de/u-boot-i2cTom Rini2017-08-1034-38/+43
|\ \
| * | i2c: designware: Allow sending restart conditionsMarek Vasut2017-08-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow sending restart conditions upon direction change as this is required by some chips. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denxx.de>
| * | Convert CONFIG_SYS_I2C_OMAP24XX to KconfigAdam Ford2017-08-1026-28/+12
| | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_OMAP24XX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * | Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XXAdam Ford2017-08-0924-24/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * | i2c: at91: Add missing probe function to device driverWenyou.Yang@microchip.com2017-08-091-2/+24
| | | | | | | | | | | | | | | | | | | | | Add missing probe function to the device driver to active a device. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | | Merge git://www.denx.de/git/u-boot-marvellTom Rini2017-08-101-98/+89
|\ \ \
| * | | net: mvpp2x: Set BM poll size once during priv probeStefan Chulski2017-08-101-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set BM poll size once during priv probe and do not overwrite it during port probe procedure. Pool is common for all CP ports. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: remove TX drain from transmit routineStefan Chulski2017-08-101-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TX drain in transmit procedure could cause issues due to race between drain procedure and transmition of descriptor between AGGR TXQ and physical TXQ. TXQ will be cleared before moving to Linux by stop procedure. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: Set BM pool high addressStefan Chulski2017-08-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MVPP22 driver support 64 Bit arch and require BM pool high address configuration. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: Remove IRQ configuration from U-BootStefan Chulski2017-08-101-45/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove IRQ configuration from U-Boot PP driver. U-Boot don't use interrupts and configuration of IRQ in U-Boot caused crashes in Linux shared interrupt mode. Also interrupt use is redundant in RX routine since a single RX queue is used. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: remove MBUS configurations from MvPP22 driverStefan Chulski2017-08-101-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MBUS driver were replaced by AXI in PPv22 and relevant only for PPv21. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNKStefan Chulski2017-08-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-boot use single physical tx queue with size 16 descriptors. So aggregated tx queue size should be equal to physical tx queue and cpu descriptor chunk(number of descriptors delivered from physical tx queue to aggregated tx queue by one chunk) shouldn't be larger than physical tx queue. Fix: Set AGGR_TXQ and CPU_DESC_CHUNK to be 16 descriptors, same as physical TXQ. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: fix BM configuration overrun issueStefan Chulski2017-08-101-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: BM counters were overrun by probe that called per Network interface and caused release of wrong number of buffers during remove procedure. Fix: Use probe_done and num_ports to call init and remove procedure once per communication controller. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: Enable GoP packet padding in TXStefan Chulski2017-08-101-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables padding of packets shorter than 64B in TX(set by default). Disabling of padding causes crashes on MACCIATO board. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: fix phy connected to wrong mdio issueStefan Chulski2017-08-101-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A8K marvell SoC has two South Bridge communication controllers(CP0 and CP1). Each communication controller has packet processor ports and MDIO. On MACHIATOBin board ports from CP1 are connected to mdio on CP0. Issue: Wrong base address is assigned to MDIO interface during probe. Fix: Get MDIO address from PHY handler parent base address. This should be refined in the future when MDIO driver is implemented. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | net: mvpp2x: Add GPIO configuration supportStefan Chulski2017-08-101-0/+31
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add GPIO configuration support in mvpp2x driver. Driver will handle 10G SFP gpio reset and SFP TX disable. GPIO pins should be set in device tree. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge git://git.denx.de/u-boot-x86Tom Rini2017-08-0816-87/+380
|\ \ \
| * | | x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobsStefan Roese2017-08-082-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This defconfig uses the PCIe x4 binary blobs from the congatec BIOS. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: conga: theadorable-x86-conga-qa3-e3845_defconfig: Misc defconfig updatesStefan Roese2017-08-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Disable debug UART - Enable more partition support Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: conga: conga-qeval20-qa3-e3845_defconfig: Misc defconfig updatesStefan Roese2017-08-081-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Enable ACPI resume support - Disable debug UART - Enable Spansion and Winbond SPI flash support - Move VGA BIOS binary address to enable bigger U-Boot images Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: theadorable-x86: Add header file for common defines and envStefan Roese2017-08-083-46/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the common header include file theadorable-x86-common.h for the theadorable-x86 targets to define all common options and the default environment. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: conga: Add option to select different config headers for baseboardsStefan Roese2017-08-085-5/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the infrastructure to define different config headers with different configurations and default environment for the baseboards that can now be selected via Kconfig. The new configuration for the theadorable-x86-conga-qa3-e3845 is also added. Also the new defconfig file for this new target is added. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: dfi: Add option to select different config headers for baseboardsStefan Roese2017-08-086-13/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the infrastructure to define different config headers with different configurations and default environment for the baseboards that can now be selected via Kconfig. The new configuration for the theadorable-x86-dfi-bt700 is also added. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | | x86: acpi: Fix build error with certain configurationBin Meng2017-08-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_EFI_PARTITION is not set, the following build error is seen in arch/x86/lib/acpi_s3.c: error: expected declaration specifiers or '...' before '*' token static void asmlinkage (*acpi_do_wakeup)(void *vector) = (void*)WAKEUP_BASE; This is actually caused by missing asmlinkage declaration, but with CONFIG_EFI_PARTITION on, the declaration comes from part.h which is included from common.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
| * | | x86: Remove dead ISA related codesBin Meng2017-08-081-66/+8
| | |/ | |/| | | | | | | | | | | | | | | | | | | Neither new design uses ISA bus, nor does any U-Boot codes use these codes. Remove them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | Merge git://www.denx.de/git/u-boot-cfi-flashTom Rini2017-08-081-2/+0
|\ \ \
| * | | mtd: cfi: Zap CFI_FLASH_SHIFT_WIDTH redefinitionMarek Vasut2017-08-081-2/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | This is defined twice in the same file, with the same value, likely because of some patch merge issue. Pick the uglier one and nuke it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge git://www.denx.de/git/u-boot-marvellTom Rini2017-08-081-3/+8
|\ \ \ | |_|/ |/| |
| * | mvebu: turris_omnia: Fix PEX vs SATA detection for board topologyMarek Behún2017-08-081-3/+8
| |/ | | | | | | | | | | | | | | The I2C reading in the PEX vs SATA detection code often fails on the first try. Try three times, as the code for EEPROM reading does. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
* | configs: Finish migration of PHY_GIGETom Rini2017-08-08427-98/+350
| | | | | | | | | | Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2017-08-07665-553/+1120
|\ \
| * | Move PHY_MICREL and PHY_MICREL_KSZ90X1 to KconfigAlexandru Gagniuc2017-08-07122-98/+109
| | | | | | | | | | | | | | | Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | Move PHYLIB to KconfigAlexandru Gagniuc2017-08-07603-105/+503
| | | | | | | | | | | | | | | Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: micrel: add an option to disable gigabit for the KSZ9031Sebastien Bourdelin2017-08-071-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | The environment variable "disable_giga" can now be used to disable 1000baseTx on the Micrel's KSZ9031. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
View Lorry Controller Status