summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* imx: clock support enet2 anatop clock supportPeng Fan2015-09-029-12/+31
| | | | | | | | | | | | | | | | To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Heiko Schocher <hs@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
* imx-common: consolidate macros and prototypes into sys_proto.hPeng Fan2015-09-026-87/+60
| | | | | | | | | | | | | | | | | Move most macro definitions and prototypes into "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated function prototypes and marco definitions for different i.MX SoCs. This patch do not remove the sys_proto.h for different i.MX SoCs, because we need to modify lots of driver code and others. This patch remove duplicated macros and prototypes and incude "sys_proto.h" of imx-common for each sys_proto.h of different i.MX platforms. Then later we should avoid add stuff in sys_proto.h of each platform, and modify driver to include common sys_proto.h. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mxs: reimplement get_cpu_revPeng Fan2015-09-022-28/+25
| | | | | | | | | | | | Rewrite get_cpu_rev, from "static const char *get_cpu_rev(void)" to "u32 get_cpu_rev(void)". To align with get_cpu_rev of other i.MXes. Also write get_imx_type to replace get_cpu_type, since we have macro named get_cpu_type. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx31 use new formula for get_cpu_revPeng Fan2015-09-022-1/+3
| | | | | | | | | Use new formula for get_cpu_rev, since we need to use this formula to do runtime check for all i.MXes. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx27 implement get_cpu_revPeng Fan2015-09-021-0/+6
| | | | | | | | Implement get_cpu_rev to support runtime check using is_cpu_type. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: add cpu type for i.MX2 and i.MX3Peng Fan2015-09-021-0/+6
| | | | | | | | Add cpu types for i.MX2/3. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig filePeng Fan2015-09-0240-132/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig. Add enable "CONFIG_ARCH_MX6" for boards based on mx6. Then we can choose target boards using "make ARCH=arm menuconfig" with ARCH_MX6 defined. If using original way, we have no chance to enable ARCH_MX6 when "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig, kconfig will complains "arch/../configs/platinum_titanium_defconfig:3: warning: override: TARGET_PLATINUM_TITANIUM changes choice state" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Bénard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Marek Vasut <marex@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Soeren Moch <smoch@web.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Soeren Moch <smoch@web.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
* mxs_ocotp: Shift the HBUS divider correctlyChris Smith2015-09-021-0/+1
| | | | | | | | | | | | | When the original HBUS divider value is retrieved in mxs_ocotp_scale_hclk() for the purpose or restoring it back later, the value is not shifted by the HBUS divider offset in that register. This is not a problem, since the shift is zero on all MXS hardware. Add the shift anyway, for completeness and in case FSL ever decides to re-use this driver on future designs. Signed-off-by: Chris Smith <chris@zxdesign.info> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* ARM: ts4800: add ethernet supportDamien Riegel2015-09-023-0/+130
| | | | | | | | | | This commit adds ethernet support to the TS4800. Note that the MAC address is not fused on this board and have to be read from FEC PALR PAUR registers (this is how the kernel provided by Technologic Systems does it). signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
* ARM: ts4800: add basic board supportLucile Quirion2015-09-028-0/+376
| | | | | | | | | | | | This commit adds basic support including: MMC, Serial console, TS4800 watchdog The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second stage bootloader. Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
* nitrogen6x: change maintainerEric Nelson2015-09-021-1/+1
| | | | | | | Troy Kisky will be maintaining the Nitrogen6x board going forward. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
* cgtqmx6eval: Add Ethernet supportOtavio Salvador2015-09-023-0/+224
| | | | | | | | | cgtqmx6eval can be populated with a AR8035 or KSZ9031 depending on the board revision. Add Ethernet support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* arm: mxs: Fix mkimage invocationMarek Vasut2015-09-021-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove this ad-hoc mkimage invocation in MXS Makefile and replace it with the standard mkimage rule instead. This patch fixes recent build issues introduced by the patch 92a655c mkimage: Set up a file size parameter and keep it updated These build issues could be triggered by building for example the MX28EVK and the u-boot.sb image: $ make mx28evk_defconfig $ make V=1 u-boot.sb [...] make -f ./scripts/Makefile.build obj=arch/arm/cpu/arm926ejs/mxs u-boot.sb ./tools/mkimage -n arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg -T mxsimage u-boot.sb ./tools/mkimage: Can't open (null): Bad address arch/arm/cpu/arm926ejs/mxs/Makefile:82: recipe for target 'u-boot.sb' failed make[1]: *** [u-boot.sb] Error 1 Makefile:989: recipe for target 'u-boot.sb' failed make: *** [u-boot.sb] Error 2 With this patch: ./tools/mkimage -n arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg -T mxsimage -d arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg u-boot.sb Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Juha Lumme <juha.lumme@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* tools: mxsboot: calculate ECC block level dynamicallyJörg Krause2015-09-021-17/+4
| | | | | | | | | | | | | | For pages of 2048 bytes the current setting of the ECC Error Correction Level is only true for an oob size of 64 bytes and wrong for all others. Instead of hard-coding every possible combination of page size and oob size use the dynamic calculation of the ECC strength introduced in commit 6121560d7714d6d8e41ce1687a1388a1a8fea4cb. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6ul_14x14_evk discard redefined CONFIG_MX6Peng Fan2015-09-021-1/+0
| | | | | | | | | | | | Discard CONFIG_MX6 in mx6ul_14x14_evk.h, since it is already defined in mx6_common.h. Tested on mx6ul_14x14_evk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* arm: mx6: Remove SPI support from WRU-IV baseboardStefan Roese2015-09-023-1/+9
| | | | | | | | | | | | This patch removes the SPI support from the WRU-IV baseboard as its not used at all. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* udoo: Remove SPL fat supportvpeter42015-09-021-1/+1
| | | | | | | | | | Use dd'ed SPL and u-boot.img by default. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* udoo: Switch to SPL supportvpeter42015-09-0212-253/+351
| | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* tools/imximage: set DCD pointer to NULL when its length is 0Baruch Siach2015-09-021-1/+5
| | | | | | | | | | | | | | | | | When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine generates is empty. This causes HAB to complain that the command is invalid. --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00 0xcc 0x00 0x04 0x04 To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header itself is still needed for detect_imximage_version() to determine the image version. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-08-3129-181/+990
|\
| * sunxi: increase SYS_MONITOR_LENBoris Brezillon2015-08-311-1/+1
| | | | | | | | | | | | Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: mmc: set transfer timeout according to byte_cnt.Yousong Zhou2015-08-311-2/+4
| | | | | | | | | | | | | | | | | | | | | | Originally a timeout value of 2 seconds was used regardless of the size of data to be transfered. This prevented slow devices from working correctly while there was no much gain for faster devices, e.g. it takes 3708ms for a transfer of uImage of size 1899008 bytes. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Enable non-secure access to RTC on sun6i (A31s)Chen-Yu Tsai2015-08-314-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On the A31s the RTC is by default secured. Thus when u-boot loads the kernel in non-secure world, the RTC is unavailable. The SoC has a TrustZone Protection Controller, which can be used to enable non-secure access to the RTC. On the A31 the TZPC doesn't seem to do anything, i.e. changes to its register contents do not affect access to the RTC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Fix MAINTAINERS board sortingHans de Goede2015-08-311-1/+1
| | | | | | | | | | | | | | | | The boards are sorted by SoC, move the Mele_A1000G_quad entry to the list of sun6i boards where it belongs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add support for the Olimex A20 EVBMarcus Cooper2015-08-314-0/+266
| | | | | | | | | | | | Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add inet98v_rev2 defconfig and dts fileHans de Goede2015-08-314-0/+260
| | | | | | | | | | | | | | | | | | | | | | The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add inet97fv2_defconfigHans de Goede2015-08-312-0/+21
| | | | | | | | | | | | | | | | | | | | | | The inet97fv2 is a board found in the first generation of cheap allwinner A10 based 7" tablets. Note that this patch does not add a dts file as we already have one from our dts syncs with the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Ampe_A76_defconfig: Add otg id pin configurationHans de Goede2015-08-311-0/+1
| | | | | | | | | | | | | | | | Add otg id pin configuration, this speeds up bootup when no host cable is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through KconfigHans de Goede2015-08-312-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig, just like SYS_NAND_BUSWIDTH_16BIT this is only enabled on some SoCs using depends, to avoid double defining it for SoCs which have not yet moved to Kconfig for this. Having this in Kconfig is useful because this is something which may differ from one board to the other even when using the same SoC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Scott Wood <scottwood@freescale.com>
| * sunxi_nand_spl: clear status flags in SPL implementationBoris Brezillon2015-08-311-3/+8
| | | | | | | | | | | | | | | | | | | | | | Some status flags remain set until you explicetly clear the bit in the status register. Fix the SPL implementation to avoid false positive. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [hdegoede@redhat.com: Port from v2015.07 to v2015.10] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_ENDHans de Goede2015-08-312-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only ever use syndrome mode for the partitions which contain the SPL, as that is required for the BROM to be able to read the SPL. Instead of using some arbritray limit for deciding whether or not to use syndrome, be smart and check if u-boot-dtb.bin is directly behind the SPL, if it is not then it is on its own partition and we should not use syndrome. Note the reason why we only use syndrome mode for the SPL is because it comeswith weaker randomization, introducing a risk for more bit errors, so we want to avoid it when possible. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXIHans de Goede2015-08-314-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We eventually want to add full nand support, since it makes no sense to build SPL with nand support and u-boot without, or the other way around, a single option will suffice. Renaming the Kconfig option now makes things easier when we add full nand support in the future. The "obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o" is moved to an "ifdef CONFIG_SPL_BUILD" block in the Makefile. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Add support for backup boot partitionsHans de Goede2015-08-311-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | The BROM does not care / use bad page markings, instead it deals with any bad pages in the first erase-block by simply trying to load "boot0" from the next erase-block. This commit implements the same strategy for the sunxi spl nand code, allowing it to boot from the backup boot partition when the main boot partition is bad (tested by erasing the main boot partition). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Auto detect nand configuration parametersHans de Goede2015-08-312-29/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Auto detect the nand configuration parameters, like the BROM does. This allows us to get rid of various Kconfig settings, and is necessary to support generic boards like the mk802 which have seen many production runs with different nands. The full blown u-boot/kernel nand driver uses the nand id to determine this info, for the SPL we do as the BROM does and simply try a few standard configs. Note the table only contains configs which are known to actually be used, rather then all the configs the BROM tries. This means that it may need to be updated in the future as we add support for nand on more boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Parametrize lowlevel read functionsHans de Goede2015-08-311-38/+48
| | | | | | | | | | | | | | | | | | | | | | | | Parametrize the lowlevel nand_read_page function, instead of directly using the CONFIG_foo settings for page-size, etc. there and add a few wrappers / helper functions for calling it. This is a preparation patch for adding auto-detecting of the nand parameters like the BROM does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Properly config page-size in the nand ctl registerHans de Goede2015-08-311-0/+5
| | | | | | | | | | | | | | | | | | Properly config page-size in the nand ctl register, it seems that things work fine without doing this, but still lets play it safe and properly set the page-size. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Add support for sun4i and sun5i SoCsHans de Goede2015-08-312-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | Other then having a few less chip-select lines the nand controller on sun4i, sun5i and sun7i is identical. Note this patch also muxes GPC7 to the NAND on sun7i where as before it was not muxed this way. GPC7 is a standard NAND pin, so it should always be muxed to the NAND when in use. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _offHans de Goede2015-08-311-46/+12
| | | | | | | | | | | | | | | | | | Sync the code for figuring out the ecc_mode and ecc_offset with the linux kernel v4.1. Keeping this in sync seems like a good idea in general, and it fixes / adds support for ecc strengths of 56, 60 and 64 bits. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Add proper cache flusingHans de Goede2015-08-311-0/+8
| | | | | | | | | | | | | | | | | | | | We are using dma, so we should flush the cache before starting the dma, and invalidate it once the dma is done. Things are working without this by mostly luck, but lets not rely on that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Turn off clocks when we're done with the nandHans de Goede2015-08-311-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | Turn off the nand and dma clocks when we're done with the nand, this puts the nand and dma controllers back into a clean state for when the kernel boots. Without this the kernel will not boot properly when it is built with dma-controller support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Make sure the DMA controller is enabledHans de Goede2015-08-311-0/+6
| | | | | | | | | | | | | | | | We use DMA for nand data transfers in the SPL, so make sure the DMA controller is enabled. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessaryHans de Goede2015-08-313-5/+10
| | | | | | | | | | | | | | | | Use SYS_NAND_SELF_INIT and only setup the pinmux and clocks when we are actually using the nand. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome modeHans de Goede2015-08-311-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | In syndrome mode we set the NFC_SEQ bit in the command register, so the spare-area register is not used. Also the value currently being written is actual wrong, the ecc sits at "column + CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE" not just CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE. So the current code only serves to confuse the user -> remove it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: We only need to reset the nand chip onceHans de Goede2015-08-311-10/+10
| | | | | | | | | | | | | | There is no need to reset the nand chip for every ecc-block read. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Drop unnecessary temp bufHans de Goede2015-08-311-27/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nand_spl_load_image() always gets called with either CONFIG_SYS_TEXT_BASE or spl_image.load_addr as destination, both of which are properly aligened, and have plenty of space for "overshooting" up to CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE bytes, as we read in CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE bytes chunks. This saves CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE (typically 1k) in SPL size, which is a lot on the total 24k we have. Note this changes the dma destination from SRAM to DRAM, so this patch updates the DDMA_DST_TYPE bits in the dma controller cfg0 reg accordingly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handlingHans de Goede2015-08-311-6/+1
| | | | | | | | | | | | | | | | | | | | CONFIG_SPL_NAND_SUPPORT gets used via IS_ENABLED so it must be defined to 1, rather then just being defined. While at remove 2 other unused NAND related defines from sunxi-common.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add CONFIG_MMC0_CD_PIN to various boardsHans de Goede2015-08-316-0/+6
| | | | | | | | | | | | | | | | | | Add CONFIG_MMC0_CD_PIN to various boards, this stops the SPL from still trying to access the sdcard when there is none (e.g. when booting from nand). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigsHans de Goede2015-08-313-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the unified / cleaned up default display output selection changes, which were done as part of adding composite video out support, our example LCD_MODE line in the A13-OLinuxIno defconfigs causes the display code to setup a LCD console by default, rather then a VGA console. Given that the LCD console is only useful for people who have hooked up the exact lcd-panel from the config, while most people will not have any lcd panel connected to these boards, this is not a good default. Dropping the LCD_MODE line which was intended as an example fixes this, instead add a link to the LCD_MODE help text pointing to http://linux-sunxi.org/LCD which contains the removed and other example modes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: musb: Drop no longer accurate comment in Kconfig help textHans de Goede2015-08-311-3/+1
| | | | | | | | | | | | | | | | | | Drop the no longer accurate part of the USB_MUSB_SUNXI Kconfig help text, since the musb-host code now supports the device-model, ehci and musb in host mode can both be enabled at the same time without issues. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add support for gt90h-v4 tabletsHans de Goede2015-08-314-0/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. The pmic setup on this board is somewhat special, dcdc2 MUST be set to 1.1V instead of the usual 1.2V otherwise the board is very unstable. aldo1 is used to power the micro sd slot, dldo1 is used for wifi. This commit adds a defconfig + dts (as submitted to the kernel) for the gt90h-v4 pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
View Lorry Controller Status