summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* dm: adc: add Exynos54xx compatible ADC driverPrzemyslaw Marczak2015-11-024-0/+199
| | | | | | | | | | | | | | | | | | | | | | | | This commit adds driver for Exynos54xx ADC subsystem. The driver is implemented using driver model, amd provides ADC uclass's methods for ADC single channel operations: - adc_start_channel() - adc_channel_data() - adc_stop() The basic parameters of ADC conversion, are: - sample rate: 600KSPS - output the data as average of 8 time conversion ADC features: - sample rate: 600KSPS - resolution: 12-bit - channels: 10 (analog multiplexer) Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dm: adc: add simple ADC uclass implementationPrzemyslaw Marczak2015-11-028-0/+783
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds: - new uclass id: UCLASS_ADC - new uclass driver: drivers/adc/adc-uclass.c The new uclass's API allows for ADC operation on: * single-channel with channel selection by a number * multti-channel with channel selection by bit mask ADC uclass's functions: * single-channel: - adc_start_channel() - start channel conversion - adc_channel_data() - get conversion data - adc_channel_single_shot() - start/get conversion data * multi-channel: - adc_start_channels() - start selected channels conversion - adc_channels_data() - get conversion data - adc_channels_single_shot() - start/get conversion data for channels selected by bit mask * general: - adc_stop() - stop the conversion - adc_vdd_value() - positive reference Voltage value with polarity [uV] - adc_vss_value() - negative reference Voltage value with polarity [uV] - adc_data_mask() - conversion data bit mask The device tree can provide below constraints/properties: - vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1) - vss-polarity-negative: if true: Vss = vss-microvolts * (-1) - vdd-supply: phandle to Vdd regulator's node - vss-supply: phandle to Vss regulator's node And optional, checked only if the above corresponding, doesn't exist: - vdd-microvolts: positive reference Voltage [uV] - vss-microvolts: negative reference Voltage [uV] Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dm: regulator: add function device_get_supply_regulator()Przemyslaw Marczak2015-11-022-0/+23
| | | | | | | | | | | | Some devices are supplied by configurable regulator's output. But there was no function for getting it. This commit adds function, that allows for getting the supply device by it's phandle. The returned regulator device can be used with regulator uclass's API. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dm: pmic: add s2mps11 PMIC I/O driverPrzemyslaw Marczak2015-11-025-0/+203
| | | | | | | | | | | | | | | | | | This driver allows I/O operations on the Samsung S2MPS11 PMIC, which provides lots of LDO/BUCK outputs. To enable it, update defconfig with: - CONFIG_PMIC_S2MPS11 and additional, if were not defined: - CONFIG_CMD_PMIC - CONFIG_ERRNO_STR The binding info: doc/device-tree-bindings/pmic/s2mps11.txt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Exynos5422/5800: set cpu id to 0x5422Przemyslaw Marczak2015-11-027-18/+18
| | | | | | | | | | | | | | | | | The proper CPU ID for those Exynos variants is 0x5422, but before the 0x5800 was set. This commit fix this back. Changes: - set cpu id to 0x5422 instead of 0x5800 - remove macro proid_is_exynos5800() - add macro proid_is_exynos5422() - change the calls to proid_is_exynos5800() with new macro Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Peach-Pi: dts: add cpu-model stringPrzemyslaw Marczak2015-11-021-0/+1
| | | | | | | | | | | | | | This platform is based on Exynos5800 but the cpu id is 0x5422. This doesn't fit the common Exynos SoC name convention, so now, the CPU name is defined by device tree string, to be printed properly. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* s5p: cpu_info: print "cpu-model" if exists in dtsPrzemyslaw Marczak2015-11-022-1/+34
| | | | | | | | | | | | | | | | | | | | The CPU name for Exynos was concatenated with cpu id, but for new Exynos platforms, like Chromebook Peach Pi based on Exynos5800, the name of SoC variant does not include the real SoC cpu id (0x5422). For such case, the CPU name should be defined in device tree. This commit introduces new device-tree property for Exynos: - "cpu-model" - with cpu name string If defined, then the cpu id is not printed. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* samsung: board/misc: check returned pointer for get_board_type() callsPrzemyslaw Marczak2015-11-022-2/+5
| | | | | | | | | | | | | The function get_board_type() is called in two places by common code, but the returned pointer was never check. This commit adds checking the returned pointer, before use it. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* x86: Select the ns16550 debug UART for minnowmax, chromebook_linkSimon Glass2015-10-302-0/+2
| | | | | | | At present the debug UART is not selected which causes a build error. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-10-30187-1091/+4390
|\
| * ls102xa: Adjust some macros for SD boot on LS1021A QDS boardAlison Wang2015-10-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | As more features are added for SD boot on LS1021A QDS board, the size of U-Boot is larger. CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS needs to be adjusted to a suitable value. Starting address of the malloc pool used in SPL needs to be adjusted too, or it will occupy the address u-boot loads. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * configs: ls1021atwr: Enable ID EEPROM for SD bootYao Yuan2015-10-301-2/+0
| | | | | | | | | | | | | | | | I2C1 can work on ls102xa rev2.0 SD boot, so add ID EEPROM for SD boot. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls1021atwr: optimize the deep sleep latencytang yuantian2015-10-302-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | It will take more than 1s when wake up from deep sleep. Most of the time is spent on outputing information. This patch reduced the deep sleep latency by: 1. avoid outputing system informaton 2. remove flush cache after DDR restore 3. skip reloading second stage uboot binary when SD boot Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * SECURE_BOOT: Correct reading of ITS bitAneesh Bansal2015-10-301-1/+1
| | | | | | | | | | | | | | | | | | The ITS bit was being read incorrectly beacause of operator precedence. The same ahs been corrected. Signed-off-by: Lawish Deshmukh <lawish.deshmukh@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers/ddr/fsl_ddr: Make SR_IE configurableJoakim Tjernlund2015-10-302-1/+3
| | | | | | | | | | | | | | | | | | SR_IE(Self-refresh interrupt enable) is needed for Hardware Based Self-Refresh. Make it configurable and let board code handle the rest. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls1021a: Add sata support on qds and twr boardtang yuantian2015-10-297-0/+117
| | | | | | | | | | | | | | | | | | | | Freescale ARM-based Layerscape LS102xA contain a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls1021aqds and ls1021atwr boards. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: Set fdt_high and initrd_high to the value of 0xffffffffAlison Wang2015-10-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As 3G/1G user/kernel memory split is used on LS1021A, the Linux kernel fails to access the device tree blob on boot. The reason is that u-boot relocates the device tree blob into high memory when booting the kernel and the kernel is unable to access the blob. To avoid this issue, fdt_high is set to the value of 0xffffffff. The device tree blob will not get relocated and is still in low memory to make it accessible to the kernel. For the same reason, initrd_high is set to the value of 0xffffffff too. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043a: Enable secondary coresHou Zhiqiang2015-10-293-0/+18
| | | | | | | | | | | | | | | | | | | | After the secondary cores enter U-Boot, use CONFIG_ARMV8_MULTIENTRY to make secondary cores excute in spin loop. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043ardb: Add sd boot supportGong Qianyu2015-10-298-1/+77
| | | | | | | | | | Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardbYangbo Lu2015-10-295-8/+40
| | | | | | | | | | | | | | | | This patch adds esdhc support for ls1043ardb. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043a: Add Fman supportShaohui Xie2015-10-2913-5/+295
| | | | | | | | | | | | | | | | Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043ardb: Add nand boot supportGong Qianyu2015-10-2910-0/+123
| | | | | | | | | | | | | | | | Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/ls1043ardb: Add LS1043ARDB board supportMingkai Hu2015-10-2915-0/+1106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1043ARDB Specification: ------------------------- Memory subsystem: * 2GByte DDR4 SDRAM (32bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * XFI 10G port * QSGMII with 4x 1G ports * Two RGMII ports PCIe: * PCIe2 (Lanes C) to mini-PCIe slot * PCIe3 (Lanes D) to PCIe slot USB 3.0: two super speed USB 3.0 type A ports UART: supports two UARTs up to 115200 bps for console Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
| * armv8/fsl_lsch2: Add fsl_lsch2 SoCMingkai Hu2015-10-2914-0/+1224
| | | | | | | | | | | | | | | | | | | | | | Freescale LayerScape with Chassis Generation 2 is a set of SoCs with ARMv8 cores and 2rd generation of Chassis. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/fsl_lsch3: Change arch to fsl-layerscapeMingkai Hu2015-10-2945-526/+713
| | | | | | | | | | | | | | | | | | | | | | | | | | There are two LS series processors are built on ARMv8 Layersacpe architecture currently, LS2085A and LS1043A. They are based on ARMv8 core although use different chassis, so create fsl-layerscape to refactor the common code for the LS series processors which also paves the way for adding LS1043A platform. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: fix MDIO controller base on FMAN2Shaohui Xie2015-10-291-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | MDIO controller base on FMAN2 was defined as CONFIG_SYS_FSL_FM2_ADDR plus offset, but CONFIG_SYS_FSL_FM2_ADDR only defined when there are two FMANs, so we should only define MDIO controller base on FMAN2 when there is FMAN2. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: Add QSGMII PCS initShaohui Xie2015-10-291-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net: Move some header files to include/Shaohui Xie2015-10-2923-21/+21
| | | | | | | | | | | | | | | | | | | | The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net: fm: bug fix when CONFIG_PHYLIB not definedShaohui Xie2015-10-291-1/+7
| | | | | | | | | | | | | | | | codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: Make the return value logic consistent with conventionHou Zhiqiang2015-10-291-24/+36
| | | | | | | | | | | | | | | | | | | | In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: Add support for 64-bit platformsHou Zhiqiang2015-10-293-33/+60
| | | | | | | | | | | | | | | | | | | | | | | | The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: Fix the endian issue to support both endianness platformsHou Zhiqiang2015-10-292-38/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv7/ls1021a: move ns_access to common fileMingkai Hu2015-10-298-213/+141
| | | | | | | | | | | | | | | | | | | | Config Security Level Register is different between different SoCs, so put the CSL register definition into the arch specific directory. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * common/board_f.c: change the macro name and remove it for PPC platformsGong Qianyu2015-10-2943-41/+25
| | | | | | | | | | | | | | | | | | | | For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: enable snooping for CAAM transactionshoria.geanta@freescale.com2015-10-292-0/+4
| | | | | | | | | | | | | | | | | | | | | | Enable snooping for CAAM read & write transactions by programming the SCFG snoop configuration register: SCFG_SNPCNFGCR[SECRDSNP] SCFG_SNPCNFGCR[SECWRSNP] Signed-off-by: Horia Geantă <horia.geanta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8: ls2085a: Add support of random MAC addressPrabhakar Kushwaha2015-10-295-0/+5
| | | | | | | | | | | | | | | | Add support of setting RANDOM MAC address if env variable not available. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * driver: net: ldpaa_eth: Set MAC address during interface openPrabhakar Kushwaha2015-10-291-12/+3
| | | | | | | | | | | | | | | | | | | | Currently ldpaa ethernet driver rely on DPL file to statically configure mac address for the DPNIs. It is not a correct approach. Add support setting MAC address from env variable or Random MAC address. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8: ls2085ardb: enable CONFIG_PHY_AQUANTIAShaohui Xie2015-10-291-0/+1
| | | | | | | | | | | | | | To support on board Aquantia's PHY AQR405. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * crypto/fsl: SEC driver cleanup for 64 bit and endiannessAneesh Bansal2015-10-295-24/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SEC driver code has been cleaned up to work for 64 bit physical addresses and systems where endianess of SEC block is different from the Core. Changes: 1. Descriptor created on Core is modified as per SEC block endianness before the job is submitted. 2. The read/write of physical addresses to Job Rings will be depend on endianness of SEC block as 32 bit low and high part of the 64 bit address will vary. 3. The 32 bit low and high part of the 64 bit address in descriptor will vary depending on endianness of SEC. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * Data types defined for 64 bit physical addressAneesh Bansal2015-10-292-5/+9
| | | | | | | | | | | | | | | | Data types and I/O functions have been defined for 64 bit physical addresses in arm. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * Pointers in ESBC header made 32 bitAneesh Bansal2015-10-292-17/+17
| | | | | | | | | | | | | | | | | | | | For the Chain of Trust, the esbc_validate command supports 32 bit fields for location of the image. In the header structure definition, these were declared as pointers which made them 64 bit on a 64 bit core. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * ls102xa: fdt: Disable IFC in SD boot for QSPIAlison Wang2015-10-291-1/+1
| | | | | | | | | | | | | | | | | | As QSPI/DSPI and IFC are pin multiplexed, IFC is disabled in SD boot for QSPI. This patch will add fdt support for this rule. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls1021a: Add QSPI or IFC support in SD bootAlison Wang2015-10-269-26/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * QE: modify the address of qe ucodeZhao Qiang2015-10-262-2/+2
| | | | | | | | | | | | | | The address of uboot changed, so change qe ucode Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * armv8/fsl-lsch3: fdt: Check the pointer returned from call to a function may ↵Alison Wang2015-10-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | be NULL Pointer 'reg' returned from call to function 'fdt_getprop' may be NULL, will be passed to function and may be dereferenced there by passing argument 1 to function 'of_read_number'. So check pointer 'reg' first. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * fdt_support: Don't panic if stdout alias is missingScott Wood2015-10-261-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, using fdt_fixup_stdout() on a device tree that is missing the relevant alias results in this: WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. ERROR: /chosen node create failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### There is no reason for this to be a fatal error rather than a warning, and removing this allows for a smooth transition on a platform where the device tree currently lacks the correct aliases but will have them in the future. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm/fsl-ls: Add CONFIG_OF_STDOUT_VIA_ALIASScott Wood2015-10-263-0/+3
| | | | | | | | | | | | | | | | This will allow OF-based earlycon to be used once the appropriate aliases are added to the device tree and kernel support is fixed. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | README.scrapyard: Populate recent ppc4xx removalsTom Rini2015-10-301-4/+4
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-10-2920-114/+326
|\ \
| * | net: eth: Check return value in various placesBin Meng2015-10-291-18/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eth_get_dev() can return NULL which means device_probe() fails for that ethernet device. Add return value check in various places or U-Boot will crash due to NULL pointer access. With this commit, 'dm_test_eth_act' test case passes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
View Lorry Controller Status