summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGEFabio Estevam2018-02-042-1/+1
* mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGEFabio Estevam2018-02-041-2/+1
* board: tbs2910: add private imx configSoeren Moch2018-02-042-1/+116
* imx: mx25: Remove SION bit in all pin-mux that are safeMichael Trimarchi2018-02-041-281/+290
* imx: mx7dsabresd: enable UHS and HS200Peng Fan2018-02-042-0/+6
* mmc: fsl_esdhc: support SDR104 and HS200Peng Fan2018-02-042-5/+405
* ARM: dts: add pinmux and tuning settings for HS200/SDR104Peng Fan2018-02-041-0/+88
* mmc: fsl_esdhc: add strobe and tuning entryPeng Fan2018-02-041-8/+12
* mx6memcal: fix comment in board header fileEric Nelson2018-02-041-3/+2
* mx6memcal: enable SDP supportEric Nelson2018-02-043-1/+12
* mx6memcal: launder through savedefconfigEric Nelson2018-02-041-5/+4
* arm: imx: mx53loco: remove usage of mx53_dram_sizePatrick Bruenn2018-02-042-39/+1
* arm: imx: m53evk: remove usage of mx53_dram_sizePatrick Bruenn2018-02-042-39/+1
* arm: imx: cx9020: move dram init into common placePatrick Bruenn2018-02-043-35/+48
* arm: imx: cx9020: remove usage of mx53_dram_sizePatrick Bruenn2018-02-041-9/+5
* board,ge,bx50v3 - rtc time validationNandor Han2018-02-043-1/+9
* configs: ge_bx50v3: automatic partition selection and video output failure me...Ian Ray2018-02-041-29/+53
* board: ge: bx50v3: mount rootfs read-onlyHannu Lounento2018-02-041-1/+1
* configs: ge_bx50v3: enable bootcountIan Ray2018-02-041-0/+8
* config: ge_bx50v3: read boot scriptIan Ray2018-02-041-6/+6
* board: ge: bx50v3: Support FIT and select configuration based on VPDIan Ray2018-02-045-83/+20
* board: ge: bx50v3: Enable hardware watchdogMartyn Welch2018-02-042-0/+5
* board: ge: bx50v3: program MAC address to I210Hannu Lounento2018-02-041-1/+36
* board: ge: bx50v3: move FEC MAC address programming to driverMartyn Welch2018-02-042-40/+41
* configs: Add network device support for bx50v3 productsIan Ray2018-02-044-5/+17
* board: ge: Enable access to i2c bus 1 and 2Martyn Welch2018-02-042-2/+4
* rtc: adding RX8010SJ rtc driverNandor Han2018-02-043-0/+385
* net: e1000: implement eth_write_hwaddrHannu Lounento2018-02-041-0/+40
* net: e1000: split e1000_read_mac_addrHannu Lounento2018-02-041-18/+63
* net: e1000: add support for writing to EEPROMHannu Lounento2018-02-042-2/+174
* imx: mx8m: add ddr controller memory mapPeng Fan2018-02-041-0/+356
* power: pmic/regulator allow dm be omitted by SPLPeng Fan2018-02-042-2/+2
* imx: imx8mq: add dtsi filePeng Fan2018-02-044-0/+1765
* net: fec: fix build warnings for 64bits supportYe Li2018-02-041-31/+43
* net: fec: do not access reserved register for i.MX8MPeng Fan2018-02-041-2/+2
* gpio: mxc: add i.MX8M supportPeng Fan2018-02-041-7/+15
* imx: lcdif: include i.MX8MPeng Fan2018-02-041-4/+6
* mmc: fsl_esdhc: support i.MX8MPeng Fan2018-02-041-4/+8
* misc: ocotp: add i.MX8M supportPeng Fan2018-02-041-0/+7
* imx: makefile: compile files for i.MX8MPeng Fan2018-02-041-2/+11
* imx: mx8m: add soc related settings and filesPeng Fan2018-02-047-2/+333
* imx: mx7: move mmc env code to mmc_env.cPeng Fan2018-02-043-21/+31
* imx: cpu: support get_boot_device for i.MX8MPeng Fan2018-02-041-1/+6
* imx: mx7: move get_boot_device to cpu.cPeng Fan2018-02-044-43/+47
* imx: bootaux: support i.MX8MPeng Fan2018-02-041-0/+10
* imx: cleanup bootauxPeng Fan2018-02-045-90/+39
* imx: refactor imx_get_mac_from_fusePeng Fan2018-02-044-67/+63
* imx: cpu: add cpu speed/grade for i.MX8MPeng Fan2018-02-041-12/+15
* imx: cpu: move speed/temp to common cpuPeng Fan2018-02-042-71/+73
* imx: add pad settings bit definition for i.MX8MPeng Fan2018-02-041-1/+21
View Lorry Controller Status