diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/u-boot.h | 3 | ||||
| -rw-r--r-- | include/configs/PATI.h | 245 | ||||
| -rw-r--r-- | include/mpc5xx.h | 173 | ||||
| -rw-r--r-- | include/ppc_asm.tmpl | 12 | ||||
| -rw-r--r-- | include/watchdog.h | 5 |
5 files changed, 1 insertions, 437 deletions
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index a7797137f3..0c1bdc77d9 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -41,8 +41,7 @@ typedef struct bd_info { unsigned long bi_dsp_freq; /* dsp core frequency */ unsigned long bi_ddr_freq; /* ddr frequency */ #endif -#if defined(CONFIG_5xx) \ - || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) +#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif #if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) diff --git a/include/configs/PATI.h b/include/configs/PATI.h deleted file mode 100644 index 1f26ac4c2d..0000000000 --- a/include/configs/PATI.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - * (C) Copyright 2003 - * Denis Peter d.peter@mpl.ch - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * File: PATI.h - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_MPC555 1 /* This is an MPC555 CPU */ -#define CONFIG_PATI 1 /* ...On a PATI board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* Serial Console Configuration */ -#define CONFIG_5xx_CONS_SCI1 -#undef CONFIG_5xx_CONS_SCI2 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_REGINFO - -#define CONFIG_BOOTCOMMAND "" /* autoboot command */ - -#define CONFIG_BOOTARGS "" /* */ - -#define CONFIG_WATCHDOG /* turn on platform specific watchdog */ - -#define CONFIG_LOADS_ECHO 1 /* Echo on for serial download */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_PREBOOT - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00010000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00A00000 /* 10 MB in SRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 } - -/*********************************************************************** - * Last Stage Init - ***********************************************************************/ -#define CONFIG_LAST_STAGE_INIT - -/* - * Low Level Configuration Settings - */ - -/* - * Internal Memory Mapped (This is not the IMMR content) - */ -#define CONFIG_SYS_IMMR 0x01C00000 /* Physical start adress of internal memory map */ - -/* - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ -#define CONFIG_SYS_INIT_RAM_SIZE (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IMMR + 0x03fa000) /* Physical start adress of inital stack */ -/* - * Start addresses for the final memory configuration - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */ -#define CONFIG_SYS_FLASH_BASE 0xffC00000 /* External flash */ -#define PCI_BASE 0x03000000 /* PCI Base (CS2) */ -#define PCI_CONFIG_BASE 0x04000000 /* PCI & PLD (CS3) */ -#define PLD_CONFIG_BASE 0x04001000 /* PLD (CS3) */ - -#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 -/* CONFIG_SYS_FLASH_BASE */ /* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file. */ - /* This adress is given to the linker with -Ttext to */ - /* locate the text section at this adress. */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_RESET_ADDRESS (PLD_CONFIG_BASE + 0x10) /* Adress which causes reset */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - *----------------------------------------------------------------------- - * - */ - -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -#define CONFIG_FLASH_SHOW_PROGRESS 45 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -#define CONFIG_ENV_IS_IN_EEPROM -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 2048 -#endif - -#undef CONFIG_ENV_IS_IN_FLASH -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x00002000 /* Set whole sector as env */ -#define CONFIG_ENV_OFFSET ((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE) /* Environment starts at this adress */ -#endif - -#define CONFIG_SPI 1 -#define CONFIG_SYS_SPI_CS_USED 0x09 /* CS0 and CS3 are used */ -#define CONFIG_SYS_SPI_CS_BASE 0x08 /* CS3 is active low */ -#define CONFIG_SYS_SPI_CS_ACT 0x00 /* CS3 is active low */ -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * SW Watchdog freeze - */ -#undef CONFIG_WATCHDOG -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \ - SCCR_COM01 | SCCR_DFNL000 | SCCR_DFNH000) - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration - *----------------------------------------------------------------------- - * Data show cycle - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register - *----------------------------------------------------------------------- - * Set all bits to 40 Mhz - * - */ -#define CONFIG_SYS_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */ - -#define CONFIG_SYS_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0) - -/*----------------------------------------------------------------------- - * UMCR - UIMB Module Configuration Register - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */ - -/*----------------------------------------------------------------------- - * ICTRL - I-Bus Support Control Register - */ -#define CONFIG_SYS_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */ - -/*----------------------------------------------------------------------- - * USIU - Memory Controller Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA) -#define CONFIG_SYS_OR0_PRELIM (0xffc00000) /* SCY is not used if external TA is set */ -/* SDRAM */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA) -#define CONFIG_SYS_OR1_PRELIM (OR_ADDR_MK_FF) /* SCY is not used if external TA is set */ -/* PCI */ -#define CONFIG_SYS_BR2_PRELIM (PCI_BASE | BR_V | BR_PS_32 | BR_SETA) -#define CONFIG_SYS_OR2_PRELIM (OR_ADDR_MK_FF) -/* config registers: */ -#define CONFIG_SYS_BR3_PRELIM (PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA) -#define CONFIG_SYS_OR3_PRELIM (0xffff0000) - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* We don't realign the flash */ - -/*----------------------------------------------------------------------- - * DER - Timer Decrementer - *----------------------------------------------------------------------- - * Initialise to zero - */ -#define CONFIG_SYS_DER 0x00000000 - -#endif /* __CONFIG_H */ diff --git a/include/mpc5xx.h b/include/mpc5xx.h deleted file mode 100644 index 6c170dcb0a..0000000000 --- a/include/mpc5xx.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * (C) Copyright 2003 - * Martin Winistoerfer, martinwinistoerfer@gmx.ch. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * File: mpc5xx.h - * - * Discription: mpc5xx specific definitions - * - */ - -#ifndef __MPC5XX_H__ -#define __MPC5XX_H__ - - -/*----------------------------------------------------------------------- - * Exception offsets (PowerPC standard) - */ -#define EXC_OFF_SYS_RESET 0x0100 /* System reset */ -#define _START_OFFSET EXC_OFF_SYS_RESET - -/*----------------------------------------------------------------------- - * ISB bit in IMMR to set internal memory map - */ - -#define CONFIG_SYS_ISB ((CONFIG_SYS_IMMR / 0x00400000) << 1) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control Register - */ -#define SYPCR_SWTC 0xffff0000 /* Software Watchdog Timer Count */ -#define SYPCR_BMT 0x0000ff00 /* Bus Monitor Timing */ -#define SYPCR_BME 0x00000080 /* Bus Monitor Enable */ -#define SYPCR_SWF 0x00000008 /* Software Watchdog Freeze */ -#define SYPCR_SWE 0x00000004 /* Software Watchdog Enable */ -#define SYPCR_SWRI 0x00000002 /* Software Watchdog Reset/Int Select */ -#define SYPCR_SWP 0x00000001 /* Software Watchdog Prescale */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration Register - */ -#define SIUMCR_EARB 0x80000000 /* External Arbitration */ -#define SIUMCR_EARP0 0x00000000 /* External Arbi. Request priority 0 */ -#define SIUMCR_EARP1 0x10000000 /* External Arbi. Request priority 1 */ -#define SIUMCR_EARP2 0x20000000 /* External Arbi. Request priority 2 */ -#define SIUMCR_EARP3 0x30000000 /* External Arbi. Request priority 3 */ -#define SIUMCR_EARP4 0x40000000 /* External Arbi. Request priority 4 */ -#define SIUMCR_EARP5 0x50000000 /* External Arbi. Request priority 5 */ -#define SIUMCR_EARP6 0x60000000 /* External Arbi. Request priority 6 */ -#define SIUMCR_EARP7 0x70000000 /* External Arbi. Request priority 7 */ -#define SIUMCR_DSHW 0x00800000 /* Data Showcycles */ -#define SIUMCR_DBGC00 0x00000000 /* Debug pins configuration */ -#define SIUMCR_DBGC01 0x00200000 /* - " - */ -#define SIUMCR_DBGC10 0x00400000 /* - " - */ -#define SIUMCR_DBGC11 0x00600000 /* - " - */ -#define SIUMCR_DBPC00 0x00000000 /* Debug Port pins Config. */ -#define SIUMCR_DBPC01 0x00080000 /* - " - */ -#define SIUMCR_DBPC10 0x00100000 /* - " - */ -#define SIUMCR_DBPC11 0x00180000 /* - " - */ -#define SIUMCR_GPC00 0x00000000 /* General Pins Config */ -#define SIUMCR_GPC01 0x00020000 /* General Pins Config */ -#define SIUMCR_GPC10 0x00040000 /* General Pins Config */ -#define SIUMCR_GPC11 0x00060000 /* General Pins Config */ -#define SIUMCR_DLK 0x00010000 /* Debug Register Lock */ -#define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */ -#define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */ -#define SIUMCR_SC10 0x00004000 /* Single adress show */ -#define SIUMCR_SC11 0x00006000 /* Single adress */ -#define SIUMCR_RCTX 0x00001000 /* Data Parity pins Config. */ -#define SIUMCR_MLRC00 0x00000000 /* Multi Level Reserva. Ctrl */ -#define SIUMCR_MLRC01 0x00000400 /* - " - */ -#define SIUMCR_MLRC10 0x00000800 /* - " - */ -#define SIUMCR_MLRC11 0x00000c00 /* - " - */ -#define SIUMCR_MTSC 0x00000100 /* Memory transfer */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control Register - */ -#define TBSCR_REFA ((ushort)0x0080) /* Reference Interrupt Status A */ -#define TBSCR_REFB ((ushort)0x0040) /* Reference Interrupt Status B */ -#define TBSCR_TBF ((ushort)0x0002) /* Time Base stops while FREEZE */ - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control Register - */ -#define PISCR_PITF ((ushort)0x0002) /* PIT stops when FREEZE */ -#define PISCR_PS 0x0080 /* Periodic Interrupt Status */ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register - */ -#define PLPRCR_MF_MSK 0xfff00000 /* MF mask */ -#define PLPRCR_DIVF_MSK 0x0000001f /* DIVF mask */ -#define PLPRCR_CSRC_MSK 0x00000400 /* CSRC mask */ -#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */ -#define PLPRCR_DIVF_0 0x00000000 /* Division factor 0 */ -#define PLPRCR_MF_9 0x00900000 /* Mulitipliaction factor 9 */ -#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */ -#define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */ -#define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */ -#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */ - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register - */ -#define SCCR_DFNL_MSK 0x00000070 /* DFNL mask */ -#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */ -#define SCCR_DFNL_SHIFT 0x0000004 /* DFNL shift value */ -#define SCCR_RTSEL 0x00100000 /* RTC circuit input source select */ -#define SCCR_EBDF00 0x00000000 /* Division factor 1. CLKOUT is GCLK2 */ -#define SCCR_EBDF11 0x00060000 /* reserved */ -#define SCCR_TBS 0x02000000 /* Time Base Source */ -#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */ -#define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */ -#define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */ -#define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */ -#define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */ - -/*----------------------------------------------------------------------- - * MC - Memory Controller - */ -#define BR_V 0x00000001 /* Bank valid */ -#define BR_BI 0x00000002 /* Burst inhibit */ -#define BR_PS_8 0x00000400 /* 8 bit port size */ -#define BR_PS_16 0x00000800 /* 16 bit port size */ -#define BR_PS_32 0x00000000 /* 32 bit port size */ -#define BR_LBDIR 0x00000008 /* Late burst data in progess */ -#define BR_SETA 0x00000004 /* External Data Acknowledge */ -#define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */ -#define OR_SCY_1 0x00000000 /* 1 clock cycle wait state */ -#define OR_SCY_8 0x00000080 /* 8 clock cycles wait states */ -#define OR_TRLX 0x00000001 /* Timing relaxed */ -#define OR_BSCY 0x00000060 /* Burst beats length in clocks */ -#define OR_ACS_10 0x00000600 /* Adress to chip-select setup */ -#define OR_CSNT 0x00000800 /* Chip-select negotation time */ -#define OR_ETHR 0x00000100 /* Extended hold time on read */ -#define OR_ADDR_MK_FF 0xFF000000 -#define OR_ADDR_MK_FFFF 0xFFFF0000 - -/*----------------------------------------------------------------------- - * UMCR - UIMB Module Configuration Register - */ -#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */ -#define UMCR_HSPEED 0x10000000 /* Half speed */ - -/*----------------------------------------------------------------------- - * ICTRL - I-Bus Support Control Register - */ -#define ICTRL_ISCT_SER_7 0x00000007 /* All indirect change of flow */ - - -#define NR_IRQS 0 /* Place this later in a separate file */ - -/*----------------------------------------------------------------------- - * SCI - Serial communication interface - */ - -#define SCI_TDRE 0x0100 /* Transmit data register empty */ -#define SCI_TE 0x0008 /* Transmitter enabled */ -#define SCI_RE 0x0004 /* Receiver enabled */ -#define SCI_RDRF 0x0040 /* Receive data register full */ -#define SCI_PE 0x0400 /* Parity enable */ -#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */ -#define SCI_SCXDR_MK 0x00ff /* Data register mask */ -#define SCI_M_11 0x0200 /* Frame size is 11 bit */ -#define SCI_M_10 0x0000 /* Frame size is 10 bit */ -#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */ -#define SCI_PORT_2 ((int)2) - -#endif /* __MPC5XX_H__ */ diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 53141b1f71..5a0fda212d 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -81,18 +81,6 @@ #define r30 30 #define r31 31 - -#if defined(CONFIG_5xx) -/* Some special purpose registers */ -#define DER 149 /* Debug Enable Register */ -#define COUNTA 150 /* Breakpoint Counter */ -#define COUNTB 151 /* Breakpoint Counter */ -#define LCTRL1 156 /* Load/Store Support */ -#define LCTRL2 157 /* Load/Store Support */ -#define ICTRL 158 /* I-Bus Support Control Register */ -#define EID 81 -#endif /* CONFIG_5xx */ - #if defined(CONFIG_MPC5xxx) #define HID0_ICE_BITPOS 16 diff --git a/include/watchdog.h b/include/watchdog.h index 0055a837c3..20ac59a8b0 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -72,11 +72,6 @@ int init_func_watchdog_reset(void); * Prototypes from $(CPU)/cpu.c. */ -/* MPC 5xx */ -#if defined(CONFIG_5xx) && !defined(__ASSEMBLY__) - void reset_5xx_watchdog(volatile immap_t *immr); -#endif - /* MPC 5xxx */ #if defined(CONFIG_MPC5xxx) && !defined(__ASSEMBLY__) void reset_5xxx_watchdog(void); |