diff options
Diffstat (limited to 'include/usb/ehci-fsl.h')
| -rw-r--r-- | include/usb/ehci-fsl.h | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h new file mode 100644 index 0000000000..114056177c --- /dev/null +++ b/include/usb/ehci-fsl.h @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc + * Copyright (c) 2005 MontaVista Software + * Copyright (c) 2008 Excito Elektronik i Sk=E5ne AB + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EHCI_FSL_H +#define _EHCI_FSL_H + +#include <asm/processor.h> + +/* Global offsets */ +#define FSL_SKIP_PCI 0x100 + +/* offsets for the non-ehci registers in the FSL SOC USB controller */ +#define FSL_SOC_USB_ULPIVP 0x170 +#define FSL_SOC_USB_PORTSC1 0x184 +#define PORT_PTS_MSK (3 << 30) +#define PORT_PTS_UTMI (0 << 30) +#define PORT_PTS_ULPI (2 << 30) +#define PORT_PTS_SERIAL (3 << 30) +#define PORT_PTS_PTW (1 << 28) + +/* USBMODE Register bits */ +#define CM_IDLE (0 << 0) +#define CM_RESERVED (1 << 0) +#define CM_DEVICE (2 << 0) +#define CM_HOST (3 << 0) +#define USBMODE_RESERVED_2 (0 << 2) +#define SLOM (1 << 3) +#define SDIS (1 << 4) + +/* CONTROL Register bits */ +#define ULPI_INT_EN (1 << 0) +#define WU_INT_EN (1 << 1) +#define USB_EN (1 << 2) +#define LSF_EN (1 << 3) +#define KEEP_OTG_ON (1 << 4) +#define OTG_PORT (1 << 5) +#define REFSEL_12MHZ (0 << 6) +#define REFSEL_16MHZ (1 << 6) +#define REFSEL_48MHZ (2 << 6) +#define PLL_RESET (1 << 8) +#define UTMI_PHY_EN (1 << 9) +#define PHY_CLK_SEL_UTMI (0 << 10) +#define PHY_CLK_SEL_ULPI (1 << 10) +#define CLKIN_SEL_USB_CLK (0 << 11) +#define CLKIN_SEL_USB_CLK2 (1 << 11) +#define CLKIN_SEL_SYS_CLK (2 << 11) +#define CLKIN_SEL_SYS_CLK2 (3 << 11) +#define RESERVED_18 (0 << 13) +#define RESERVED_17 (0 << 14) +#define RESERVED_16 (0 << 15) +#define WU_INT (1 << 16) +#define PHY_CLK_VALID (1 << 17) + +#define FSL_SOC_USB_PORTSC2 0x188 +#define FSL_SOC_USB_USBMODE 0x1a8 +#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */ +#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */ +#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */ +#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ +#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ +#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define SNOOP_SIZE_2GB 0x1e + +/* System Clock Control Register */ +#define MPC83XX_SCCR_USB_MASK 0x00f00000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +#if defined(CONFIG_MPC83XX) +#define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR +#elif defined(CONFIG_MPC85xx) +#define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR +#endif + +/* + * USB Registers + */ +struct usb_ehci { + u8 res1[0x100]; + u16 caplength; /* 0x100 - Capability Register Length */ + u16 hciversion; /* 0x102 - Host Interface Version */ + u32 hcsparams; /* 0x104 - Host Structural Parameters */ + u32 hccparams; /* 0x108 - Host Capability Parameters */ + u8 res2[0x14]; + u32 dciversion; /* 0x120 - Device Interface Version */ + u32 dciparams; /* 0x124 - Device Controller Params */ + u8 res3[0x18]; + u32 usbcmd; /* 0x140 - USB Command */ + u32 usbsts; /* 0x144 - USB Status */ + u32 usbintr; /* 0x148 - USB Interrupt Enable */ + u32 frindex; /* 0x14C - USB Frame Index */ + u8 res4[0x4]; + u32 perlistbase; /* 0x154 - Periodic List Base + - USB Device Address */ + u32 ep_list_addr; /* 0x158 - Next Asynchronous List + - End Point Address */ + u8 res5[0x4]; + u32 burstsize; /* 0x160 - Programmable Burst Size */ + u32 txfilltuning; /* 0x164 - Host TT Transmit + pre-buffer packet tuning */ + u8 res6[0x8]; + u32 ulpi_viewpoint; /* 0x170 - ULPI Reister Access */ + u8 res7[0xc]; + u32 config_flag; /* 0x180 - Configured Flag Register */ + u32 portsc; /* 0x184 - Port status/control */ + u8 res8[0x20]; + u32 usbmode; /* 0x1a8 - USB Device Mode */ + u32 epsetupstat; /* 0x1ac - End Point Setup Status */ + u32 epprime; /* 0x1b0 - End Point Init Status */ + u32 epflush; /* 0x1b4 - End Point De-initlialize */ + u32 epstatus; /* 0x1b8 - End Point Status */ + u32 epcomplete; /* 0x1bc - End Point Complete */ + u32 epctrl0; /* 0x1c0 - End Point Control 0 */ + u32 epctrl1; /* 0x1c4 - End Point Control 1 */ + u32 epctrl2; /* 0x1c8 - End Point Control 2 */ + u32 epctrl3; /* 0x1cc - End Point Control 3 */ + u32 epctrl4; /* 0x1d0 - End Point Control 4 */ + u32 epctrl5; /* 0x1d4 - End Point Control 5 */ + u8 res9[0x228]; + u32 snoop1; /* 0x400 - Snoop 1 */ + u32 snoop2; /* 0x404 - Snoop 2 */ + u32 age_cnt_limit; /* 0x408 - Age Count Threshold */ + u32 prictrl; /* 0x40c - Priority Control */ + u32 sictrl; /* 0x410 - System Interface Control */ + u8 res10[0xEC]; + u32 control; /* 0x500 - Control */ + u8 res11[0xafc]; +}; + +#endif /* _EHCI_FSL_H */ |