diff options
Diffstat (limited to 'include/power/acpi_pmc.h')
| -rw-r--r-- | include/power/acpi_pmc.h | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/include/power/acpi_pmc.h b/include/power/acpi_pmc.h new file mode 100644 index 0000000000..1f50c23f5f --- /dev/null +++ b/include/power/acpi_pmc.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2019 Google LLC + */ + +#ifndef __ACPI_PMC_H +#define __ACPI_PMC_H + +enum { + GPE0_REG_MAX = 4, +}; + +/** + * struct acpi_pmc_upriv - holds common data for the x86 PMC + * + * @pmc_bar0: Base address 0 of PMC + * @pmc_bar1: Base address 2 of PMC + * @acpi_base: Base address of ACPI block + * @pm1_sts: PM1 status + * @pm1_en: PM1 enable + * @pm1_cnt: PM1 control + * @gpe_cfg: Address of GPE_CFG register + * @gpe0_dwx_mask: Mask to use for each GPE0 (typically 7 or 0xf) + * @gpe0_dwx_shift_base: Base shift value to use for GPE0 (0 or 4) + * @gpe0_sts_req: GPE0 status register offset + * @gpe0_en_req: GPE0 enable register offset + * @gpe0_sts: GPE0 status values + * @gpe0_en: GPE0 enable values + * @gpe0_dw: GPE0 DW values + * @gpe0_count: Number of GPE0 registers + * @tco1_sts: TCO1 status + * @tco2_sts: TCO2 status + * @prsts: Power and reset status + * @gen_pmcon1: General power mgmt configuration 1 + * @gen_pmcon2: General power mgmt configuration 2 + * @gen_pmcon3: General power mgmt configuration 3 + */ +struct acpi_pmc_upriv { + void *pmc_bar0; + void *pmc_bar2; + u32 acpi_base; + u16 pm1_sts; + u16 pm1_en; + u32 pm1_cnt; + u32 *gpe_cfg; + u32 gpe0_dwx_mask; + u32 gpe0_dwx_shift_base; + u32 gpe0_sts_reg; + u32 gpe0_en_reg; + u32 gpe0_sts[GPE0_REG_MAX]; + u32 gpe0_en[GPE0_REG_MAX]; + u32 gpe0_dw[GPE0_REG_MAX]; + int gpe0_count; + u16 tco1_sts; + u16 tco2_sts; + u32 prsts; + u32 gen_pmcon1; + u32 gen_pmcon2; + u32 gen_pmcon3; +}; + +struct acpi_pmc_ops { + /** + * init() - Set up the PMC for use + * + * This reads the current state of the PMC. Most of the state is read + * automatically by the uclass since it is common. + * + * This is optional. + * + * @dev: PMC device to use + * @return 0 if OK, -ve on error + */ + int (*init)(struct udevice *dev); + + /** + * prev_sleep_state() - Get the previous sleep state (optional) + * + * This reads various state registers and returns the sleep state from + * which the system woke. If this method is not provided, the uclass + * will return a calculated value. + * + * This is optional. + * + * @dev: PMC device to use + * @prev_sleep_state: Previous sleep state as calculated by the uclass. + * The method can use this as the return value or calculate its + * own. + * + * @return enum acpi_sleep_state indicating the previous sleep state + * (ACPI_S0, ACPI_S3 or ACPI_S5), or -ve on error + */ + int (*prev_sleep_state)(struct udevice *dev, int prev_sleep_state); + + /** + * disable_tco() - Disable the timer/counter + * + * Disables the timer/counter in the PMC + * + * This is optional. + * + * @dev: PMC device to use + * @return 0 + */ + int (*disable_tco)(struct udevice *dev); + + /** + * global_reset_set_enable() - Enable/Disable global reset + * + * Enable or disable global reset. If global reset is enabled, both hard + * reset and soft reset will trigger global reset, where both host and + * TXE are reset. This is cleared on cold boot, hard reset, soft reset + * and Sx. + * + * This is optional. + * + * @dev: PMC device to use + * @enable: true to enable global reset, false to disable + * @return 0 + */ + int (*global_reset_set_enable)(struct udevice *dev, bool enable); +}; + +#define acpi_pmc_get_ops(dev) ((struct acpi_pmc_ops *)(dev)->driver->ops) + +/** + * init() - Set up the PMC for use + * + * This reads the current state of the PMC. This reads in the common registers, + * then calls the device's init() method to read the SoC-specific registers. + * + * @return 0 if OK, -ve on error + */ +int pmc_init(struct udevice *dev); + +/** + * pmc_prev_sleep_state() - Get the previous sleep state + * + * This reads various state registers and returns the sleep state from + * which the system woke. + * + * @return enum acpi_sleep_state indicating the previous sleep state + * (ACPI_S0, ACPI_S3 or ACPI_S5), or -ve on error + */ +int pmc_prev_sleep_state(struct udevice *dev); + +/** + * pmc_disable_tco() - Disable the timer/counter + * + * Disables the timer/counter in the PMC + * + * @dev: PMC device to use + * @return 0 + */ +int pmc_disable_tco(struct udevice *dev); + +/** + * pmc_global_reset_set_enable() - Enable/Disable global reset + * + * Enable or disable global reset. If global reset is enabled, both hard + * reset and soft reset will trigger global reset, where both host and + * TXE are reset. This is cleared on cold boot, hard reset, soft reset + * and Sx. + * + * @dev: PMC device to use + * @enable: true to enable global reset, false to disable + * @return 0 + */ +int pmc_global_reset_set_enable(struct udevice *dev, bool enable); + +int pmc_ofdata_to_uc_platdata(struct udevice *dev); + +int pmc_disable_tco_base(ulong tco_base); + +void pmc_dump_info(struct udevice *dev); + +/** + * pmc_gpe_init() - Set up general-purpose events + * + * @dev: PMC device + * @return 0 if OK, -ve on error + */ +int pmc_gpe_init(struct udevice *dev); + +#endif |