diff options
Diffstat (limited to 'include/configs/mccmon6.h')
| -rw-r--r-- | include/configs/mccmon6.h | 70 |
1 files changed, 23 insertions, 47 deletions
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 667dac7340..c685de6551 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -14,10 +14,6 @@ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000) -#define CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + 0x180000) -#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + 0x1980000) -#define CONFIG_SYS_FDT_SIZE (48 * SZ_1K) #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 /* @@ -28,28 +24,17 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800) #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80) #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000) -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6q-mccmon.dtb" +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage" /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT - -#define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_SPEED 100000 - /* MMC Configuration */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -66,22 +51,18 @@ #define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) } /* Ethernet Configuration */ -#define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200 quiet\0" \ - "fdtfile=imx6q-mccmon6.dtb\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "boot_os=yes\0" \ + "kernelsize=0x300000\0" \ "disable_giga=yes\0" \ "download_kernel=" \ - "tftpboot ${kernel_addr} ${kernel_file};" \ - "tftpboot ${fdt_addr} ${fdtfile};\0" \ + "tftpboot ${loadaddr} ${kernel_file};\0" \ "get_boot_medium=" \ "setenv boot_medium nor;" \ "setexpr.l _src_sbmr1 *0x020d8004;" \ @@ -89,10 +70,7 @@ "if test ${_b_medium} = 40; then " \ "setenv boot_medium sdcard;" \ "fi\0" \ - "kernel_file=uImage\0" \ - "load_kernel=" \ - "load mmc ${bootdev}:${bootpart} ${kernel_addr} uImage;" \ - "load mmc ${bootdev}:${bootpart} ${fdt_addr} ${fdtfile};\0" \ + "kernel_file=fitImage\0" \ "boot_sd=" \ "echo '#######################';" \ "echo '# Factory SDcard Boot #';" \ @@ -103,12 +81,11 @@ "run factory_flash_img;\0" \ "boot_nor=" \ "setenv kernelnor 0x08180000;" \ - "setenv dtbnor 0x09980000;" \ "setenv bootargs console=${console} " \ CONFIG_MTDPARTS_DEFAULT " " \ "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \ - "cp.l ${dtbnor} ${dtbloadaddr} 0x8000;" \ - "bootm ${kernelnor} - ${dtbloadaddr};\0" \ + "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \ + "bootm ${loadaddr};reset;\0" \ "boot_recovery=" \ "echo '#######################';" \ "echo '# RECOVERY SWU Boot #';" \ @@ -116,14 +93,13 @@ "setenv rootfsloadaddr 0x13000000;" \ "setenv swukernelnor 0x08980000;" \ "setenv swurootfsnor 0x09180000;" \ - "setenv swudtbnor 0x099A0000;" \ "setenv bootargs console=${console} " \ CONFIG_MTDPARTS_DEFAULT " " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}::off root=/dev/ram rw;" \ "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \ - "cp.l ${swudtbnor} ${dtbloadaddr} 0x8000;" \ - "bootm ${swukernelnor} ${rootfsloadaddr} ${dtbloadaddr};\0" \ + "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \ + "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \ "boot_tftp=" \ "echo '#######################';" \ "echo '# TFTP Boot #';" \ @@ -131,7 +107,7 @@ "if run download_kernel; then " \ "setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rootwait;" \ - "bootm ${kernel_addr} - ${fdt_addr};" \ + "bootm $loadaddr};reset;" \ "fi\0" \ "bootcmd=" \ "if test -n ${recovery_status}; then " \ @@ -151,13 +127,10 @@ "fi;" \ "fi\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "fdt_addr=0x18000000\0" \ "bootdev=1\0" \ "bootpart=1\0" \ - "kernel_addr=" __stringify(CONFIG_LOADADDR) "\0" \ "netdev=eth0\0" \ "load_addr=0x11000000\0" \ - "dtbloadaddr=0x12000000\0" \ "uboot_file=u-boot.img\0" \ "SPL_file=SPL\0" \ "load_uboot=tftp ${load_addr} ${uboot_file}\0" \ @@ -184,6 +157,7 @@ "device ${mmcdev};" \ "run factory_nor_img;" \ "run factory_eMMC_img;" \ + "run factory_SPL_falcon_setup;" \ "fi\0" \ "factory_eMMC_img="\ "echo 'Update mccmon6 eMMC image'; " \ @@ -205,6 +179,16 @@ "erase ${nor_bank_start} +${nor_img_size};" \ "setexpr nor_img_size ${nor_img_size} / 4; " \ "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \ + "factory_SPL_falcon_setup="\ + "echo 'Write Falcon boot data'; " \ + "setenv kernelnor 0x08180000;" \ + "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \ + "spl export fdt ${loadaddr};" \ + "setenv nor_img_addr ${fdtargsaddr};" \ + "setenv nor_img_size 0x20000;" \ + "setenv nor_bank_start " \ + __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \ + "run nor_update\0" \ "tftp_nor_uboot="\ "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \ "setenv nor_img_file u-boot.img; " \ @@ -213,22 +197,14 @@ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ "run nor_update;" \ "fi\0" \ - "tftp_nor_uImg="\ - "echo 'Update mccmon6 NOR uImage via TFTP'; " \ - "setenv nor_img_file uImage; " \ + "tftp_nor_fitImg="\ + "echo 'Update mccmon6 NOR fitImage via TFTP'; " \ + "setenv nor_img_file fitImage; " \ "setenv nor_img_size 0x500000; " \ "setenv nor_bank_start 0x08180000; " \ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ "run nor_update;" \ "fi\0" \ - "tftp_nor_dtb="\ - "echo 'Update mccmon6 NOR DTB via TFTP'; " \ - "setenv nor_img_file imx6q-mccmon6.dtb; " \ - "setenv nor_img_size 0x20000; " \ - "setenv nor_bank_start 0x09980000; " \ - "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ - "run nor_update;" \ - "fi\0" \ "tftp_nor_img="\ "echo 'Update mccmon6 NOR image via TFTP'; " \ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ |