diff options
Diffstat (limited to 'include/configs/ls2080ardb.h')
| -rw-r--r-- | include/configs/ls2080ardb.h | 50 |
1 files changed, 47 insertions, 3 deletions
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index ec83eb5fd5..ef95358ebf 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -12,6 +13,11 @@ #undef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 2 +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SYS_I2C_EARLY_INIT +#define CONFIG_DISPLAY_BOARDINFO_LATE +#endif + #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 #define CONFIG_VOL_MONITOR_IR36021_READ @@ -69,6 +75,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#ifndef CONFIG_FSL_QSPI /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */ #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) @@ -157,7 +164,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) - #define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f @@ -250,7 +256,7 @@ unsigned long get_board_sys_clk(void); /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL - +#endif #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* @@ -263,10 +269,17 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI +#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH +#ifdef CONFIG_FSL_QSPI #define CONFIG_SPI_FLASH_STMICRO #endif +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */ +#define FSL_QSPI_FLASH_NUM 2 +#endif +#endif /* * RTC configuration @@ -345,6 +358,25 @@ unsigned long get_board_sys_clk(void); " 0x580800000 \0" \ BOOTENV #else +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "scriptaddr=0x80800000\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x81000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x89000000\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x21000000\0" \ + "mcmemsize=0x40000000\0" \ + "mcinitcmd=fsl_mc start mc 0x20a00000" \ + " 0x20e00000 \0" \ + BOOTENV +#else #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "scriptaddr=0x80800000\0" \ @@ -367,6 +399,7 @@ unsigned long get_board_sys_clk(void); " 0x580800000 \0" \ BOOTENV #endif +#endif #undef CONFIG_BOOTARGS @@ -376,11 +409,18 @@ unsigned long get_board_sys_clk(void); " hugepagesz=2m hugepages=256" #undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_QSPI_BOOT +/* Try to boot an on-QSPI kernel first, then do normal distro boot */ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \ + " && bootm $kernel_start" \ + " || run distro_bootcmd" +#else /* Try to boot an on-NOR kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \ " && cp.b $kernel_start $kernel_load $kernel_size" \ " && bootm $kernel_load" \ " || run distro_bootcmd" +#endif /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET @@ -389,7 +429,11 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PHY_CORTINA #define CONFIG_PHYLIB #define CONFIG_SYS_CORTINA_FW_IN_NOR +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_CORTINA_FW_ADDR 0x20980000 +#else #define CONFIG_CORTINA_FW_ADDR 0x581000000 +#endif #define CONFIG_CORTINA_FW_LENGTH 0x40000 #define CORTINA_PHY_ADDR1 0x10 |