diff options
Diffstat (limited to 'include/configs/j721e_evm.h')
| -rw-r--r-- | include/configs/j721e_evm.h | 38 |
1 files changed, 33 insertions, 5 deletions
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index c8a76037ff..1b47e18b2f 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -2,7 +2,7 @@ /* * Configuration header file for K3 J721E EVM * - * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/ * Lokesh Vutla <lokeshvutla@ti.com> */ @@ -23,8 +23,10 @@ #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE) +#define CONFIG_SYS_UBOOT_BASE 0x50280000 /* Image load address in RAM for DFU boot*/ #else +#define CONFIG_SYS_UBOOT_BASE 0x50080000 /* * Maximum size in memory allocated to the SPL BSS. Keep it as tight as * possible (to allow the build to go through), as this directly affects @@ -81,16 +83,29 @@ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" +#ifdef CONFIG_SYS_K3_SPL_ATF +#if defined(CONFIG_TARGET_J721E_R5_EVM) +#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ + "addr_mainr5f0_0load=0x88000000\0" \ + "name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0" \ + "addr_mcur5f0_0load=0x89000000\0" \ + "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0" +#elif defined(CONFIG_TARGET_J7200_R5_EVM) +#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ + "addr_mcur5f0_0load=0x89000000\0" \ + "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0" +#endif /* CONFIG_TARGET_J721E_R5_EVM */ +#else +#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC "" +#endif /* CONFIG_SYS_K3_SPL_ATF */ + /* U-Boot MMC-specific configuration */ #define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ "boot=mmc\0" \ "mmcdev=1\0" \ "bootpart=1:2\0" \ "bootdir=/boot\0" \ - "addr_mainr5f0_0load=88000000\0" \ - "name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0" \ - "addr_mcur5f0_0load=89000000\0" \ - "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0" \ + EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \ "rd_spec=-\0" \ "init_mmc=run args_all args_mmc\0" \ "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ @@ -109,15 +124,28 @@ "${bootdir}/${name_fit}\0" \ "partitions=" PARTS_DEFAULT +/* Set the default list of remote processors to boot */ +#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) #ifdef DEFAULT_RPROCS #undef DEFAULT_RPROCS #endif +#endif + +#ifdef CONFIG_TARGET_J721E_A72_EVM #define DEFAULT_RPROCS "" \ "3 /lib/firmware/j7-main-r5f0_1-fw " \ "4 /lib/firmware/j7-main-r5f1_0-fw " \ + "5 /lib/firmware/j7-main-r5f1_1-fw " \ "6 /lib/firmware/j7-c66_0-fw " \ "7 /lib/firmware/j7-c66_1-fw " \ "8 /lib/firmware/j7-c71_0-fw " +#endif /* CONFIG_TARGET_J721E_A72_EVM */ + +#ifdef CONFIG_TARGET_J7200_A72_EVM +#define DEFAULT_RPROCS "" \ + "2 /lib/firmware/j7200-main-r5f0_0-fw " \ + "3 /lib/firmware/j7200-main-r5f0_1-fw " +#endif /* CONFIG_TARGET_J7200_A72_EVM */ /* set default dfu_bufsiz to 128KB (sector size of OSPI) */ #define EXTRA_ENV_DFUARGS \ |