diff options
Diffstat (limited to 'include/configs/bf561-ezkit.h')
| -rw-r--r-- | include/configs/bf561-ezkit.h | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h deleted file mode 100644 index 2fefe98f85..0000000000 --- a/include/configs/bf561-ezkit.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * U-Boot - Configuration file for BF561 EZKIT board - */ - -#ifndef __CONFIG_BF561_EZKIT_H__ -#define __CONFIG_BF561_EZKIT_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf561-0.3 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 30000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 20 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 6 - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 9 -#define CONFIG_MEM_SIZE 64 - -#define CONFIG_EBIU_SDRRC_VAL 0x306 -#define CONFIG_EBIU_SDGCTL_VAL 0x91114d - -#define CONFIG_EBIU_AMGCTL_VAL 0x3F -#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 -#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) - -/* - * Network Settings - */ -#define ADI_CMDS_NETWORK 1 -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x2C010300 -#define CONFIG_SMC_USE_32_BIT 1 -#define CONFIG_HOSTNAME bf561-ezkit - -/* - * Flash Settings - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI_AMD_RESET -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 135 -/* The BF561-EZKIT uses a top boot flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET (0x800000 - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE 0x2000 - -/* - * I2C Settings - */ -#define CONFIG_SYS_I2C_SOFT -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C -#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0 -#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0 -#endif - -/* - * Misc Settings - */ -#define CONFIG_UART_CONSOLE 0 - -/* - * Run core 1 from L1 SRAM start address when init uboot on core 0 - */ -/* #define CONFIG_CORE1_RUN 1 */ - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |